Looking for soft reset application - 8125, K-JAM, P4300, MDA Vario General

Like the one in Faria's ROM or similar.
Anyone know where I can get it?
Eran

Don't know what is in Faria's ROM, but try psShutXP - do a google search is a freeware app and its pretty good.

I'm not sure but i think 'inclose' task manager has this, if you want to try a different option (freeware also)

http://www.vijay555.com/?Releases:VJEschaton
Read his page if you need to work out how to use it.

Related

Has anybody PQz up and running on the Wizard

Hi,
i want to use PQz which can remap some keys of the HW keyboard to be CTRL or ALT. So CTRL-C and CTRL-V as on the big brother - PC - is able.
Unfortunatly i get an error message after starting PQz:
Keyboard Hook failed
At first i thought that is Cap-Notify causing the problems and have renamed it from the autostart folder. But it seems that this is not the problem.
Has anybody the progi up and running? For a complete installed prog list of my device see below.
Here are the links to PQz:
http://www.nicque.com/PQz/DOC/index_e.htm
http://forum.xda-developers.com/vie...tart=350&sid=bb9aa6276b3535371c550315b7569bc8
Yes it works for me on my Qtek 9100 with PQz not PQzII unfortunatly.
Have you try to install PQz after a hard reset to see if you have the same message with no other apps install. If not try after to install one app after another to see the one who is hooking the keyboard.
No problems here using PQZII on my 8125 with the 2.17 ROM.
CameronJ said:
No problems here using PQZII on my 8125 with the 2.17 ROM.
Click to expand...
Click to collapse
Which apps have you installed? Anyone not which is on my list?
And what apps have you in your Autostart folder?
DocteurN said:
Yes it works for me on my Qtek 9100 with PQz not PQzII unfortunatly.
Have you try to install PQz after a hard reset to see if you have the same message with no other apps install. If not try after to install one app after another to see the one who is hooking the keyboard.
Click to expand...
Click to collapse
I have tried PQy II only. I have deactivated all "critical" apps (Magicbutton, Smallmenu, Smartskey, Capsnotify etc.) to see if this has an impact on PQz2 - but it worked not at all :x
What error message did you get during using PQzII. The same as mine?
I will give PQz one a try
I have solved the problems:
It was PocketBreeze. I have checked the option: only PocketBreeze uses DPAD in the general settings section. After unchecking it, PQz2 works like a charm.
Use with CapsNotify?
topcaser said:
I have solved the problems:
It was PocketBreeze. I have checked the option: only PocketBreeze uses DPAD in the general settings section. After unchecking it, PQz2 works like a charm.
Click to expand...
Click to collapse
Wow! Good catch! Saved me some trouble. (Mine wasn't bombing but D-Pad was inoperable)
Here's another issue. It seems to mess up the CapsNotify tweak. A little square shows up instead of the dot or the circle. Anyone find a setting that takes care of that?

Uninstalling New ROM Task Manager?

I HATE this task manager that comes with the ROM, but I can't find how to un-install it. I've looked for programs to uninstall hidden programs, but can only find one for today plugins. Any advice? Thanks in advance.
Not Likely
Correct me if I'm wrong...HTC TMv2 - I believe that Sprint built it into the ROM. Thus your only option is to disable it in the settings and use something else...I like quickmenu myself.
Thanks, I didn't try that yet. When I installed SPB Pocket Plus with the task manager on, the touch screen wouldn't work! It's all good now

can i trust this?

im sorry about my english.
this site sez that if i install this program in my mda vario it will become wm6 with touchflo.. http://dhiehyhies.multiply.com/journal/item/18
can i trust this site? it wont make my phone dead or something?
i want to put in my vario wm6 with touchflo.
now i have a regular htc mda vario with wm5.
thank you=]
at the next page there is also an upgread to wm6 professional.
what is your reccomend for me to upgrade my phone? the wm6 with touchflo or the wm6 professional?
asaf_hermann said:
im sorry about my english.
this site sez that if i install this program in my mda vario it will become wm6 with touchflo.. http://dhiehyhies.multiply.com/journal/item/18
can i trust this site? it wont make my phone dead or something?
i want to put in my vario wm6 with touchflo.
now i have a regular htc mda vario with wm5.
thank you=]
Click to expand...
Click to collapse
Well,its just another custom build wm6 Rom without any ipl/spl included in it,it looks safe though,but I can't assure you of its trust worthiness,as I have never used rom from this site.But you'll have to get your phone CID unlocked first to upgrade to any wm6 rom.Instead of this Rom,You can find many latest custom build wm6 and wm6.1 excellent roms here in this forum,which are trustworthy.
thanks.
do you know where i can find a program that can unlock my cid?
and im searching for a wm6 with touchflo, do the wm6.1 that is here includes it?
Actually, you can install touchflo on any ROM - even on your current WM5 - the program you need is called ftouchflo. I guess it stands for "fake touchflo", since touchflo itself is HTC's driver/software placed in their touch/touch dual/polaris phones, and what ftouchflo does is emulating the behaviour of HTC's touchflo.
So, just search the forum for ftouchflo, and install its cab (make sure you get the latest version - 1.4.1).
You'll also want to install the ftouchflo configuration tool (should pop up when searching for ftouchflo).
With these two apps you'll have the system-wide finger scrolling and left/right/up/down gestures support plus ability to easily configure gestures and exclude programs from ftouchflo scrolling (stuff that has its own finger scrolling or gesture support - like pocketCM)
Efrost, creator of touchflo also released a much more powerful and more configurable version of it, called ftouchSL, but this one's a commercial app, not freeware.
And if you want the cube launcher, like the one on Touch phones, search for SCLPC++ - you don't need it embedded in your ROM as well and can install it on pretty much anything running WM5 or higher OS.
So, my advice to you is to first get to know the software and see if you actually like it. It's easier to install it into OS that doesn't include it, than remove it from ROM
thank you about the reply.
about the SCLPC++ i had it but it had some bugs like the menu disapeared so i delete it.
About the ftouchflo i will try to find it, but also i want to upgrade to wm6 so if i can do it, and put touchflo at the same time.. why not?.
--------------
does someone know where can I find a program that will unlock my CID?
It's all in the wiki
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
hi
it's up to you if you want to trust it. hehe...
btw, i'm the owner of that blog.
and many filipinos are using that rom. mostly members form www.airfagev.com since that rom was dedicated for that site. anyways, the rom is outdated and i'm not planning to update it.

Need Dialer Back

Just upgraded to Sprint 6.1 Rom on my vogue and lost my dialer, anyone know where I can find it (CAB) again? I really dont like the new one since there is no "talk" button. Any help would be great. Thanks.
id be willing to bet google knows where that dialer is
Been looking for awhile now, maybe Google doesnt like me.... Thanks though.
Use the ppcgeeks kitchen, make yourself your own rom, unlock your device, put the vogue dialer in that ROM, flash and feel accomplished
ppckitchen.org
I'm not sure what is the name of the dialer though but it's included in open touch v4 rom for xda herald:
http://forum.xda-developers.com/showthread.php?t=377939
Frankly I really hated this dialer. The number buttons are small and very unresponsive. The color is not as pleasing. I recommend the iphone dialer of the newer minimal dialer.
that is actually the wm6 default dialer. I remember seeing a cab of it somewhere around here (for the wm5 folks)
This may be the cab you are looking for. From WM5.
I had to scout around and find it when i upgraded to WM6.
Cheers.
make the following edit in your registry and soft reset.
hklm\security\phone\skin\enabled = 0
thanks "black_mamba" @ ppcgeeks.

Just Wondering...

Which is better ultimately? SPB or Touchflo3d for the Xperia? I am looking to get either. Also, do both function as panels?
...if it really was worth the effort posting another SPB v TouchFlo post with a title which doesn't explain the question?
Try them both, it depends on who are using it. In my case i prefer TF3D.
I heard issues with TF3D...how bad are they? I just installed .net CF 3.5. It will now apply to every application right? There is no need to set it so that the rest uses it? Anyway, I tried searching for SPB but I did not get any results...

Categories

Resources