i wants to know how can i access some unsecured network that are near my work place. Basically there are some unsecured network near my work, i have tried to connect to these networks so that i can use internet. However i have no luck in accessing it.
Do i need to enter any ip address in the network adapter or the ip address is automatically taken????
At the moment i have assigned the ip address to 192.168.1.201 so that i can connect to my orange live box.
Thanks in advance
it depend on the wifi router setup
as default it run dhcp and asign you an ip
but that can be turned off
some wifi's require a login to the internet isp's site or telnet to open for internet (i know my home one does)
also you cant really see if a wifi router use mac filtering
for security then it will just not route for you if your mac add is not on it's list
Related
into teeny weeny little pieces.
I feel so much better now!!
Anyways...I have a wireless home network up and running and would like to connet the xda to it.
I can connect to the router no probs but IE cant connect to the web. it says "the page you are looking for cannot be found".
Any ideas why I can connect to the router but not to the web?
Cheers folks - thanks
I know how you feel. There are a couple things you have to do.
First check that you have selected to connect via "work".
Then ensure that the IP address shown is in the range of 192.168.0.X
had no problems with my wifi on my home network, as ale210p said, I think it's with the way your connect via "work" or "ISP" is configured
hiya folks
thanks for coming to my rescue..hopefully i can get this thing on the road.
- in connections - advanced - select networks. both selections are set to "my work network"
- in configure network adapters - network adapters. the "my network connects me to" dropdown is selected to work.
- where can i check my ip address on the device?
Alhtough I am connected to my wireless network as that what the wireless LAN manager says?
any ideas guys?
many thanks
Is your internet provider checking the MAC address? my provider checks for the MAC address and hence I had to register my MAC address first with the provider.
I'm pretty sure my ISP isnt checking my MAC address as my PC and other computer on the network work fine with regards to internet access and I never gave the MAC addresses to the ISP.
However, my modem router does have mac filtering enabled. I have copied the MAC address of the xda to the allowed list. However I've also tried to turn this filter off and the result was the same....I still could connect to my home wireless network but had the same error message when trying to surf through pocket IE.
Any other ideas on why I can connect to the network but IE wont let me surf?
thanks again
I'm having exactly the same problem as Richard. What I don't understand is, I can drive around and find free residential wireless hotspots and surf the net , but I can't do it on my own WLAN!
IP info OK?
These symptoms could indicate that vital IP info is missing on your XDA.
Does your XDA get an IP address + gateway address + DNS server address from the router's DHCP server? Use vxIPConfig to determine this http://www.cam.com/windowsce.html
I know for a fact that many times (not always) my QTEK 9090 does NOT get the required IP info from my SMC Barricade 2804WBR b/g wireless router, so I started using fixed addresses on my QTEK.
If I use DHCP, many times I can connect to the router but am unable to access the internet... Because the QTEK has not received an IP address/gateway address/DNS server address in those cases. Fixed addresses always work.
whoa
thanks for the advice. i installed the app. rubbed the sticks together and there were sparks i tell you!!! but what does it all mean?
the ip address is 169.254.84.245
subnet mask 255.255.0.0
dhcp server 255.255.255.255
im no tekkie so am not sure what the above means? does it provide any clues?
thanks for the advice so far
just an update
i manually inputted the ip address assigned to my xda by the router as i have dhcp disabled on the router.
nonetheless it sill doesnt let me connect to the net but i can connect to the wlan?
richard321_blue said:
just an update
i manually inputted the ip address assigned to my xda by the router as i have dhcp disabled on the router.
nonetheless it sill doesnt let me connect to the net but i can connect to the wlan?
Click to expand...
Click to collapse
Fixed IP address is good, but have you also put in the gateway address and DNS server address? Normally the gateway address + DNS server address = router address.
If your routers IP address would be 192.168.1.1 (quite common address), then your IP address could be 192.168.1.2, gateway address would be 192.168.1.1 and DNS server (name server) address also 192.168.1.1.
BTW; this:
the ip address is 169.254.84.245
subnet mask 255.255.0.0
dhcp server 255.255.255.255 <========= !!!!
means that DHCP didn't work!
I suppose that when you state "connect to the wlan" you mean that you can 'see' machines on your local network? Or what? That would make sense because you wouldn't need a gateway address and DNS server address for that normally (broadcasts).
siliconaddict....you're a genius!
finally it works, it works i say.
fantastic.
thanks to all for the advice and feedback - much appreciated.
can i stoke the fire and ask how i can sync via wifi as well?
never done it myself, but here is a guide
I have never synced over WiFi myself, but here are some guides:
http://theillustratednetwork.mvps.org/WM2003/ActiveSync/WM2003ActiveSyncConfiguration.html
http://forum.xda-developers.com/viewtopic.php?p=132820
Please note that the next version of Activesync, version 4, doesn't do syncing over Wifi anymore...
Good luck!
Sorry to be a complete noob, but:
1. How do I find out the IP Address of the XDA (Is it in Wireless LAN Manager, under "current config" and "IP:"?)
2. My Netgear USB WLAN is showing an IP of "0.0.0.0" (on command prompt >> ipconfig) How do I change this?
Thanks
Q & A
A 1: On your PDA use Use vxIPConfig for this http://www.cam.com/windowsce.html. Unfortunately the OS doesn't have a standard utility for it, like 'ipconfig'.
A 2: Does your router hand out IP addresses at all? Or: is DHCP enabled on your router? If true, do you have the correct drivers loaded for that USB NIC? In Device Manager how does it look? Yellow exclamation mark? Can you post the output of 'ipconfig /all'.
hi guys, any help you can give is realy apreciated,
ive never used wifi before on my exec or in a home network so treat me as a beginer. ive got a pci wifi network card and i am trying to set it up so i can use my mda pro when i am at home. my computer is currently connected to my housemates wired network which is a simple set up
bb modem......
......|..............
....router........
..../....\..........
my.....his.......
pc......pc.........
like i said nothing fancy, i installed the network card which went fine and bridged my network connections together as advised by my large local computer retailer. my computer asked me to provide a name and network key so i did. my pc is now connected to my mda pro.
and in the wifi it displays
main
status connected to network
ssid: cusnet *thats what i entered as my network name*
tx rate:auto
mode: ad hoc
channel:6
bssid:00-71-0e-71-29-00
mac:00-09-2d-52-4d-66
ip:169.254.156.219
settings
half in power save
turn off not on
leap
nothing entered
...............................
every so often i get the following
*unable to obtain a server assigned ip address, try later or enter an ip address in network settings*
i cant get any internet based app to work and i am asumeing its due to the settings, any help is gonna be soooo apreciated
i dont want to subscribe to wifi in the city if i cant get it working in my own home lol
any one think this might be a network problem ?
ive posted a few questions on network forums but no reply yet
i am lost
:?
From the info that you have given, it looks like your universal is getting an incorrect ip address. What you need to do is check what your desktop ip address and gateway is. Then give your universal and ip in the same range as the desktop ip and also add the gateway to your device. It should wotk this way !
The best option would be to get a wireless access point instead of the wireless network card and set things up like this.
....bb modem......
...........|..............
........router........
..../......|......\.............
my...access......his......
pc......point.......pc......
The wireless access point plugges directly into the router rather than connecting through your PC.
If you don't fancy the above setup then you could use internet connection sharing. You'll need to remove the bridge between your network cards and ensure that the router,your PC and friends PC's isn't using 192.168.0.x IP addresses.
Then you can select ICS (tick the allow other computers to access internet...) on your network card's (one to the router) advanced properties and select your wireless NIC as your home network connection.
I hope this isn't too heavy I've resisted the temptation to start talking about subnets, NAT, DHCP and all the other networking terms.
Hey everyone. Well the title says it all. Is it possible to manually type in an IP address to a specific router instead of the phone actually automatically giving me one?? If not, are there any programs that can accomplish this?
thanks
Easy there, you want to enter a fixed IP in your router in the computer? Or you want to select IP in the case of its type in the IP network on your phone?
Depending on the router, it works with DHCP, Auto IP, this is more of the router for WLAN network, it is configured with an IP again, to not be that your network is DHCP, it?
Computer (fixed) -> Router (fixed) + Router (DHCP wlan)
Any wishes?
thanks
If you have the IP of your wireless network, and only enter the track in his case:
Ex: 192.168.0.x
Ja, if your network is DHCP, assigns an IP Auto, and so leave them the phone!
Do not confuse this: If the connection of your home is wireless (radio) you will configure your phone to use the same sign, so you need a wi-fi router
Yes, there is a way to set a static ip on your WM device. All you have to do is go to Settings, Select the Connections tab at the bottom, select WI-FI, Select Network Adapters tab, Make sure "The Internet" is selected from the drop down menu, Select IEEE 802.11b/g Compatible WI-FI Adapter, select Use specific IP Address and fill in the requested info.
I never really thought about it until you asked. i knew there was a way to do it i just never took the time to look at the options.
I hope this helps, if not let me know.
I'm having trouble understanding your question. the phone doesnt specify the IP, if the router has DHCP enabled, then it'll automatically assign the phone the IP. You want it so that when you're on your WLAN, the IP address is fixed? If that's the case, then go into your router's setting and reserve a specific IP that you want your phone to have. All you have to do is input your phone's MAC address into the router's setting with the desirable IP address. The next time you're on WIFI, your phone will have the IP that you assigned.
I can`t go into the Web via T-Mobile after I went into the web via WLAN
My wlan configuration is as follows:
network: Broadcom 802 DHD etc...
IP: I must put it in
Subnet 255.255.0.0
Standardgateway 172.16.1.1
DNS 172.16.1.1
Only when I erase the configuration I can go into the Web via T-Mobile but then
I can`t go into the Web visa WLAN
Crazy
What I get is that there is a "DNS error" when I try to go into the web via T-Mobile....
Is the challenge to guess your Windows version, ROM and installed applictions, browsers etc?
There's a thread for Q&A's, this is ROM Development.
Windows version: WM 6.1
ROM: The original rom from HTC
browsers: opera and IE
Pls help me because all WLAN and T-Mobile codes seem to be right
Although you dind't specify anything about the ROM and OS version you have, I can tell you a little about the way IP addresses work and why you're not having internet.
Every computer on the internet has an IP address and that is used to identify it. However there are on a home network more than one computer, so you have a router that re-routes your internet through it's own range of IP addresses. Meaning you get an IP from your provider, which your router stores, and your router gives all computers in a network an IP address. This way every computer in your network can connect to the internet without the ISP having to give you more than one IP address.
Normally routers work with a technique called DHCP, dynamic host configuration protocol, which allows all computers in the network to communicate and share addresses. So without having to enter information manually a computer knows that the DNS is 172.16.1.1 (for example) and that it's IP is 172.16.1.*. If you disable this technique you must enter the information manually.
This isn't a problem until you need to connect to more than one network. Since every network has it's own set of IP ranges, it's own DNS, etc. So when you connected to your WiFi and manually entered information for your home network you disabled the ability to connect to T-Mobile yourself. Since the IP you get from T-Mobile isn't the same as you use in your WiFi network.
The other way around is the same, when you connect to T-Mobile your getting an IP address assigned automatically, howevery our WiFi network doesn't give you one automatically and thus resulting in no internet connection.
I hope that made sense to you, kept it as simple as possible. Also I hope you can fix the problem... normally you can do that by enabling DHCP in your router by logging in into the device. (You usually do this by entering the IP address of the default gateway into your webbbrowser.)
peter7 said:
I can`t go into the Web via T-Mobile after I went into the web via WLAN
My wlan configuration is as follows:
network: Broadcom 802 DHD etc...
IP: I must put it in
Subnet 255.255.0.0
Standardgateway 172.16.1.1
DNS 172.16.1.1
Only when I erase the configuration I can go into the Web via T-Mobile but then
I can`t go into the Web visa WLAN
Crazy
Click to expand...
Click to collapse
KilZone - thank you so much for your kind answer !!!
I do only have an access point no router ?
Is this possible too ?
I think the access point functions as a router too, not sure about that, but you can try by entering the default gateway into your browser and see where you end up.
peter7 said:
KilZone - thank you so much for your kind answer !!!
I do only have an access point no router ?
Is this possible too ?
Click to expand...
Click to collapse
moved out of dev
Dupe thread.
Just Got a focus from america (i live in the uk). Everything seems to work, except the wifi. It just says connection unsuccessful your phone couldnt reach the wi-fi network. . does anyone know how to solve this issue ?
Is this a home router or work router your trying to connect to? Some people have reported that having the router assign a static IP worked, because DHCP was assigning a IP address that was already assigned to another device.
If it's a corporate router MAC address filtering maybe enabled & your phone's MAC address may not be in the list of allowed devices. It could also be that you haven't loaded the required certificate to allow you use of the router.