Help... Internet sharing via USB doesn't appear to be working on my T-mobile dash with WM5 to my thinkpad X60t with Vista. Vista recognizes the connection, but it never gets an IP address via the internet sharing. Another thing that is interesting is that the Vista is showing Access as "Local Only" and in status of the connection, Received packets is always showing 0, as if there was a firewall on. However, I have firewall turned off. HELP!!
--tim
Related
I updated to the new HTC Cinuglar ROM. Before I updated I used the Wireless Model application with no issues.
Now, I followed the directions on AT&T's website.
Installed ActiveSync (disabled USB connections for Active Sync).
Went to Internet Sharing and selected USB and My ISP.
Connected the USB cable to the Laptop
Then clicked connect. It started to connect to the GPRS system and then after a few seconds returns the message "Remote Party Ended Connection".
I have found no information on any other settings to make Anyone have any idea what is wrong?
Also, it seems weird that in the Programs application "Internet Sharing" is not there, but it is in the Start Menu.
Thanks for your ideas and help.
easy fix for me
I have found that on my laptop, if wifi is turned on, Internet sharing is sporadic in performance. It seems as if ie wants to go to the wifi connection first before it will go to the internet sharing connection. I'm sure someone with networking expertise could tell me why and how to fix, but i just turn off my wifi adaptor.
hi all,
i've been trying unsuccessfully for days now to try to connect my ipaq 114, running on windows mobile 6 to the internet via my desktop connection. someone suggested the internet pass through connection but apparently active sync does not support that anymore. i have absolutely no idea what to do or if i can even connect to the net via my desktop connection. my pda is also bluetooth enabled. would that be an easier option to do or not?
i've trie googling for answers but most times i end up more confused. can someone please help this newbie out . it would be most appreciated.
if your activesync is not set to block it or your firewall is not
then going into settings->connections->connections->advanced select network
and choosing my network or something like that
should force your device to use the ac connection as network
xxxxxxxxxxxxxxx
i'm not sure but i always close my firewall when i active sync as my firewall always interupts my connection
i don't see this advanced select network. so i just click on connections settings in active sync and enable evrything.didn't work. do i have to like set up new modem connection or something really basic i have not done
it's a tab called advanced which have a button called select networks
on ur desktop puter, goto active sync connection settings and have it set to the connect to the internet...mine didn't work if i had it on automatic setting
GL
ok i have set it to this computer is connected to internet but it still says cannot cannot with current connection settings?
anyone got any ideas how i can connect my pocket5 pc to the internet using my desktop connection?
I am having a similar problem. my Windows Mobile 6 device works fine at home via Visa sync, or via Wifi. At work if I try to use activeSyn on Windows XP the sync part works fine, but I can't see the internet on the mobile device. On the palmtop I have tried the USB to PC advanced network functionality both on and off. I have also tried various suggestions on this thread, but not working.
any suggestions would be welcome
Bruce
Mobile device can't see internet via XP activesync
I am having a similar problem. my Windows Mobile 6 device works fine at home via Visa sync, or via Wifi. At work if I try to use activeSyn on Windows XP the sync part works fine, but I can't see the internet on the mobile device. On the palmtop I have tried the USB to PC advanced network functionality both on and off. I have also tried various suggestions on this thread, but not working.
any suggestions would be welcome
Bruce
I've searched for related topics, but none are quite on point.
The following works for XP, but not for Vista, and I cannot figure out why.
(Note: I have the unlimited data plan, please use with caution if
you do not have the plan).
I am using AT&T as my carrier.
Using CeRegEditor, I performed the following on my Motorola Q 9h global device running WM 6.1, USB connector is connected from phone to PC:
1) changed HKLM\Comm\InternetSharing\Settings = "ForceCellConnection"
to "" and rebooted
2) In HKLM\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4...}\Connections,
changed ATT ICS and MEdia Net "ReadOnly" value from 1 to 0
On the phone itself, I then selected Start->Settings->Internet Sharing:
PC Connection = USB
Network Connection = MEdia Net
After issuing "Connect" on the phone, I have internet access when the phone
is connected via USB cable to the Windows XP PC, but not when connected via USB cable to the Vista PC.
====
I have tried Bluetooth instead of USB when connecting to Vista, to no avail.
I have tried to obtain a new IP address for the USB connection, to no avail.
I disabled Norton firewall, to no avail.
I disabled the wireless card I installed last year when my internet
connection was DSL with a wireless access point, to no avail.
The phone connects ("syncs") fine with both PCs. On XP, the application is called 'Microsoft ActiveSync', and on Vista, 'Windows Mobile Device Center'.
I appreciate any advice you have.
It should work. I am using Vista SP1 and a WM 6.1 cooked HP 614c. Even managed to use the data connection in a virtual machine running on the same system. As soon as you hit ´Connect´ the sync session gets disconnection (status in Device Center is disconnected). Then Vista should detect a new connection called Remote NDIS based Internet Sharing Device. When running it for the first time, a driver will be installed. After that it detects a new network which you can setup using the Network Center. Did this happen in your case?
Hey duckyman, thanks for responding. I do see the 'Remote NDIS based Internet Sharing Device' on the Network and Sharing center, but the connection is listed as 'local'.
I did notice that once you hit 'connect' on the phone that the WM Device Center application on the PC lists the connection as no longer connected.
This is normal behavior, however, as the same thing happens on Win Xp with the corresponding 'Active Sync' application, and the XP connection works for me.
I think the problem is with Vista. I will try one more time with Bluetooth instead, I noticed that under 'Bluetooth Settinngs' on the phone that though I had enable bluetooth, I did not check the box "Allow other Bluetooth devices to see this phone".
Have a look here:
http://forum.xda-developers.com/showthread.php?t=407563
It works perfect on Vista and win 7
Hello All,
Here is my problem and I need help.
Situation:
Laptop WinXp is connected to Internet via cable modem.
Now I want to make access to Internet via Wi-Fi from laptop for WM 6.5 device.
I manage to connect and browse Internet with other laptop via laptop connected to cable modem –internet. WM device is showing connected to SSID but Internet doesn’t work.
Internet access via ActiveSync and USB cable is working perfectly but via Wi-Fi doesn’t
After many hours browsing various forums I couldn’t find any good working solution.
Any help is highly appreciated.
Regards and Thank you.
zoran974
ACER S200
Please find attached.
How can I at least connect WM6.5 using Laptop's Internet?
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??
samalam said:
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??
Click to expand...
Click to collapse
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?
Undoubtedly, technology problems hold you and your company back. That's not good for business and as such it's a great idea to get the problems fixed quickly. For several small companies, small business computer support isn't confined to one person within the company; rather, it is tech support that is called in.
==================
Project Management Software
patrick_spd4u said:
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?
Click to expand...
Click to collapse
I tried and that did not work. Is there any body who got this working, if not in company settings, what about in home settings??
Hi All, new here
I keep getting "Data Connectivity Problem - The server failed to communicate.Try again later" error when trying to connect to my home PC through "Internet pass-through". "Internet pass-through" seems to connect fine to the PC, but then fails to connect to the internet through it, even if the Symantec Firewall is totally off.
On the other hand, no such problem when connecting through "Internet pass-through" to my work PC. The phone connects to the PC and Internet with no problem.
I guess the differences are because of a different internet connection type in work and home. Not sure what the connection type at work, but my PC at home uses a VPN dial-up of type "L2TP IPSec VPN".
Is there anything I should configure in this connection to be able to connect to the internet?
Current OS is Android 2.2.1, stock ROM, no tweaks.
*BUMP*
Anyone..?
I think you need HTC Sync installed on your computer(s) before you can use them for internet pass-through on your Desire HD.
I had this problem too on one of my laptops and my work PC but installing HTC Sync did the trick. You can get it from the HTC website.
Of course, and I do have its latest version 3.0.5511 installed on my Home PC, but still not luck.
I know it seems dumb because I doubt you use it but check your windows firewall. I have had it cause problems for me when it reactivated itself, after not being turned on in over a year, when I turned off Symantec firewall. Take a look at least.
Sent from my GSB Eris
Yes, as mentioned in my first post - "Internet pass-through" seems to connect fine to the PC, but then fails to connect to the internet through it, even if the Symantec Firewall is totally off."
I've disabled Symantec Firewall by right-clicking its task bar icon, and selecting "Disable Symantec Endpoint protection Small business Edition" -shouldn't this be enough?
[SOLVED] by Microsoft TCP/IP fix
I've downloaded the following TCP/IP fix from Microsoft, installed it on my Windows XP SP3, restarted my PC, connected my DHD, and that's it - "Internet pass-through" is now connecting successfully! with no additional configurations.
Download the fix from here:
http://support.microsoft.com/kb/299357