Does anyone know if when using MS Voice Command with the Artemis and bluetooth headset can you hear the confirmation voice through the headset or does it come out the Artemis speaker. I want to be able to press the bluetooth headset button and hear the tone for MS Voice Command then speak the name of the person and hear it repeated back to me through the bluetooth headset. Is this the way it works on the Artemis???
Related
My "old" P800 was able to announce who was calling in my Bluetooth headset. After pushing a button on my Bluetooth headset I was able to do voice dialling. It could even pick up the call without pushing a button on Bluetooth headset.
Can wm 2005 on the Prophet do all this?
I have this working on my Jamin without any hacks
Care to share how? I just got a JAMin. No mention of voice dial except by launching program and certainly no mention of BT button. Pairs with my Plantronics M3000 fine but BT button doeas nothing. Any ideas?
Regards
Query to Wardy about Bluetooth Headset & Voice command
Hi Wardy does your Jamin let you control MS Voice command using the button on the BT headset? Or do you have to press the voice command button on the PDA and then talk through the headset?
Voice Command, once it is installed on the Prophet, works just like it did on the Magician. However, the Prophet (at least in Jamin flavor) has an app that lets you create voice tags to control most of it's functions, and this app can be started by using the button on your bluetooth headset (and accepts audio from your bluetooth headset). There are a few limitations, though: you have to create a voice tag for every single item that you want it to launch... and you can't create a voice tag for Voice Command :?. In other words, it is (as far as I'm concerned) completely worthless :evil:
Re: Query to Wardy about Bluetooth Headset & Voice comma
crackerjack said:
Hi Wardy does your Jamin let you control MS Voice command using the button on the BT headset? Or do you have to press the voice command button on the PDA and then talk through the headset?
Click to expand...
Click to collapse
Hi no sorry I am using the supplied voice command software. Its not a problem for me putting voise dial numbers in and I believe it gives better recognition than text to speach. But that's my view
i have an HTC wizard with WM5 and i am using a plantronic bluetooth headset that works great except that when i press the button on the headset i cannot make the phone activate the windows built in voice dialing. The button works fine to comnad the phone to hang up ans answer a call. does anyone know ho to have the bluetooth headset button activate the builting voice dialing ?
Hold that same button in that you use to answer/hang up until you hear a beep. Then you will see your phone switch to the voice dialing screen and you will hear one more beep. After that just speak the command you want to execute and the system will re-play the command back to you if it recognizes it. Works great on my 640!
I am encountering a problem where after some time (do not know how long exactly) my BT headset seems not to synchronize with my TyTN. So when an incoming call arrives I am unable to answer it using the BT headset. Also, when I try to use Voice dialing it efuses to use my BT headset.
Only when I do a soft reset it works.
any ideas?
I have the same problem with a SonyEricsson HBH-610A.
Some times the bluetooth stops it self and I have to activate it agan.
Today when I tried to install the headset again, it searched forever and then I got the message, "Problem with Internal Bluetooth Hardware" and a OK button??
Only when I do a soft reset it saves the problem.
It actually drives me nuts, because I want to answer calles when the TyTN is in its holster.
I am using a Plantronics 655 with my TyTN running VC 1.5 with the common registry hack and have similar problems but not exactly the same. I want to be able to initiate voice dialing via the headset but when VC repeats the command it comes through the phone speaker and not the headset which also means my confirmation of the command has to be through the phone rather than the headset. Also, when a call comes in my TyTN speaks the name and number of the calling party through the telephone speaker but only beeps in my headset. To me it should be speaking to me through the headset.
I'm trying to get down to the bottom of this issue so it can be resolved through coordinated pressure on the responsible party(s).
Any help I receive will go to help all BT users of VC on the TyTN.
I am using a Plantronics 655 with my TyTN running VC 1.5 with the common registry hack and have similar problems but not exactly the same. I want to be able to initiate voice dialing via the headset but when VC repeats the command it comes through the phone speaker and not the headset which also means my confirmation of the command has to be through the phone rather than the headset. Also, when a call comes in my TyTN speaks the name and number of the calling party through the telephone speaker but only beeps in my headset. To me it should be speaking to me through the headset.
I'm trying to get down to the bottom of this issue so it can be resolved through coordinated pressure on the responsible party(s).
Any help I receive will go to help all BT users of VC on the TyTN.
I posted the same on Howard-Forums but no reply :-(
Is there any specific profile that the bluetooth headset needs to support in order to use it with Microsoft Voice Command ?
I have an iTech R35 Clip bluetooth headset. The headset supports Hands Free, Headset and Wireless Stereo.
When I set it as Hands Free, wneh I receive a call I can hear on the headset who is calling but I can not answer the phone using the button on the headset (it does not do anything). When I set it as Headset, I can answer the phone but voice command does not announce who is calling.
Using both settings (Hands Free or Headset), when the phone is idle, pressing the button on the headset will activate voice command BUT I can only use the phone's mic to enter commands (it does not accepts commands using the headset's mic).
I have done all the registry hacks to de-activate the SDDialer and activate Microsoft's Voice Command.
So some questions:
- Anyone with the iTech R35 out there that successfully is using this headset with Tytn and Microsoft Voice command with the ability to "speak" commands on the headset's mic ???
- Anyone out there with any other stereo bluetooth headset (preferably with ear buds) that successfully is using MS Voice Command with their headset (including the ability to "speak" commands using the headset's mic)?
Read the wiki!
There tends to be no reply here if the subject has been covered thoroughly in the wiki. If you take a look at the TyTN wiki here: http://wiki.xda-developers.com/index.php?pagename=Hermes_Utils at the section marked Use MS Voice Command instead of the built-in Cyberon Voice Dialer and the corresponding forum thread here: http://forum.xda-developers.com/viewtopic.php?t=59541 then you should find answers to most of your questions and more.
Have you tried the Cyberon Voice Commander program from the Dopod extended rom? I think MS Voice Command can be picky about headsets; i am using the full Cyberon prog with a Nokia HS-12W A2DP headset and just picked up a V-3 BTH8 headset and both work no problem with my TyTN for voice dialling and starting programs. It differs from VC in some functionality but for voice dialling they are basically the same.
I have had a Jabra BT Headset for a couple of years and it works well. I have recently purchased a XCarLink with BT and am now using this in my car instead of the headset. One thing that I liked about the headset was how it worked with M$ Voice Command - i.e. press the 'Talk' button and Voice Command would start and you could say 'call xxx' etc. With the XCarLink if I press the 'Talk' button this justs stops any music that was playing but doesn't start Voice Command.
Is there any tweak I can apply to get this behaviour?
Andy
More testing......
I have been doing some more testing with this as the Jabra BT headset stopped activating Voice Command...
Anyway I have tested a couple of different versions of Voice Command (1.6.19214 & the one from the Diamond 1.6.19581) and both behave the same. If A2DP Joint Stereo is enabled (HKLM\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings - UseJointStereo=1) then the 'Talk' button on the BT headset no longer activates Voice Command. If Joint Stereo is disabled the 'Talk' button activates Voice Command (after a soft-reset).
I haven't had time to check the behaviour with the XCarLink but I will post the results when I do.
If anyone has any experience with this or knows a fix then I'd appreciate it.
Andy
Anyone been able to get voice dialling working from the Xcarlink? I just bought one and am having the same problems.