XDA Exec Not Charging - JASJAR, XDA Exec, MDA Pro General

My xda exec just stopped charging all of a sudden, my battery is completely drained. the usb sync cable doesn't work, neither does the charger. please help.

Make sure device is off before connecting...
Using a non-data connection to a charger is not the same as a USB connection to another computer: I've discovered that if the device is on/open/running when I plug in a non-data charging cable (e.g., car charger or home charger as opposed to a USB connection to another computer), the device won't charge, and in fact will run down completely if left unattended like that. But if I turn the device fully off and then plug it in, it works. Strange, but true...I do this all the time when using my Jasjar as a GPS in the car. Hope this helps. Cheers,

It also works if you shut the machine off after you connect it. I found that it depends on the charger. The standard charger works even if the machine is switched on, but a lot of after market chargers don't work right away and you need to switch the machine off first.

Good news!
patrickl said:
It also works if you shut the machine off after you connect it. I found that it depends on the charger. The standard charger works even if the machine is switched on, but a lot of after market chargers don't work right away and you need to switch the machine off first.
Click to expand...
Click to collapse
Thanks, that's really important info, because the USB jack is a weak point of the Universal, and the less one plugs and unplugs it, the better...so now I'll try re-powering it instead of unplugging and re-plugging it! Cheers,

Yeah, I had my USB jack break off too Actually, it could be that that is the problem Greenarcher707™ is having, although I guess he would have noticed that.
BTW you need to switch the PDA off and wait for a second or two. Then the orange light goes on. No orange light, no charging.
Quite anoying that it doesn't always work right away. I've had a few incidents where I ended up with a flat battery just because I forgot "the procedure" and the thing just wasn't charging.

Related

JasJar won't charge any more...any ideas?

I just posted on the accessories forum about my experience with the Brodit active holder that I purchased. Mounted it in my car, and plugged the brodit charger in. Fuse in car charger went bang (not literally). Now I know it's not my power adapter in the car, as I've been using another JasJar charger and GPS charger for ages, so I went to Halfords and bought some replacement fuses. Tried them in the charger. Every one died too instantly.
I assumed the charger must be faulty, and arranged to send the holder back to Clove to replace it. It wasn't until I plugged my JasJar into the normal charger last night that I discovered it was no longer charging at all. I tried unplugging and replugging. I tried using the USB cable in my pc. Nothing works. Even the other car charger won't charge it any more.
I'm guessing I now have to send my JasJar to HTC for repairs and be without it for a couple of weeks. I'm not too happy about it though, and thought I would ask here first if this has happened to anyone else and if there might be a way to get it charging again without having to send it away.
i had a similar problem, i went to france with a charger that had a changable head, with pins for the different countries on click in plates, and on the top was a usb socket.
i took a standard usb to mini usb cable with me figuring this is a usb charger like the one that came with my phone but no, i couldnt get it charging, then after 12 hrs of it refusing, it eventually kicked back in, i sussed you had to use it like plugging it into a pc, ie, it turn it off, wait, then plug it in. bingo it started charging again.
its working like activesync, right pain, shoulda just taken me charger and a mains convrter
sorry it doesent really help but its poss related
Carnivor said:
i had a similar problem, i went to france with a charger that had a changable head, with pins for the different countries on click in plates, and on the top was a usb socket.
i took a standard usb to mini usb cable with me figuring this is a usb charger like the one that came with my phone but no, i couldnt get it charging, then after 12 hrs of it refusing, it eventually kicked back in, i sussed you had to use it like plugging it into a pc, ie, it turn it off, wait, then plug it in. bingo it started charging again.
its working like activesync, right pain, shoulda just taken me charger and a mains convrter
sorry it doesent really help but its poss related
Click to expand...
Click to collapse
similar problem. but i change the port miniusb. 30 dolares in mexico.
no problem, is easy. and now is working ok.
Well I've sent it in for repairs now. Couldn't get the thing to charge.
this forum is amazing...if there is an information available, you can bet it you can find it here...:
thanks carnivor: I had the same problem, but just was not smart enough to get the idea to shut it off and then on...with your help i solved the problem...i still don't get it, why it did charge with the original charger or with the usb cable from the pc and not with the generic usb charger and that same cable....and actually: it depended on the ROM installed: with the qtek rom it did not matter, with the t-mobile it did..
anyway: now it works. thanks!
I notice that the power lead is thinner than a usb lead so there may be less wires inside, ie 2 + ground instead of 4 + ground, the lack of TX and RX connections may well be what causes it. Im not going to hack into the charger cable just yet to find that out.
Intresting about the rom versions changing the fact if you can have device on before sync or not. Im not going to reflash now with an update around the corner im just going to wait for that.
notice that the power lead is thinner than a usb lead so there may be less wires inside, ie 2 + ground instead of 4 + ground, the lack of TX and RX connections may well be what causes it.
Click to expand...
Click to collapse
yes, but interestingly it also doesn't work with the same cable that syncs and charges from the pc, when this cable is connected to the lighter or the generic USB charger...so the mess starts already in the charger.
but bottomline: as long as there's a workaround...

HTC TyTN does not charge anymore.... Need Help

Hi Guys
I have a problem with my TyTN at the moment.
My device is not charging.
Yesterday i put it in my Docking Station and wait a little time.
But Now the Tynt isnt charged.
I think ist a Problem with my TyTN Hardware.
I have all Power Supplys used they i have, but it doesent work.
Can you help me?
Its this a problem with the accu or a fuse on the circuit ?
Sorry for my broken english i hope you understand me.
Regards Patrik Laube
Hello,
first of all, try to soft reset the device.
If it fails, hard reset it.
If it doesn't work, go the service center.
Good luck
The above advice is fine. But you did not say if any of the LEDs are lit.
Do you get the red NO CHARGE LED?
Does your phone operate normally except for not charging?
Mike
Hello
My Phone is working fine but i cant charge it with the original HTC adapter.
I must load the accu with a special loader.
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
When i plug in the USB Cable it doesent make everthing.
I think it was a to high voltage on the USB or the USB Ground ( - ) had a electrical Power for a litte moment.
Have you an idea?
Thanks for yur help.
Regards Patrik
I had a similar problem, which was sorted by a new rom, but I ascertained it was software problem when I realised it charged when powered off.
PatrikLaube said:
Hello
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
Have you an idea?
Thanks for yur help.
Regards Patrik
Click to expand...
Click to collapse
hi,
try this: when your device is connected via usb, tab on the battery icon in the taskbar on you device, go to the register "advanced" and check/uncheck "When Device is turned on, do not charge the battery when connected to the pc"
thats it
greetz
mizi
I'm having an issue along these lines, also.
My phone has been working fine untill the other night when I tried to charge it via the wall electrical outlet. It will not charge at all, the battery has been drained to nothing and I can't turn it on. The yellowish light doesn't turn on when I plug it in like it used to.
I don't know if this is a battery issue or an issue with the USB connection inside of the phone. On a side note, when it did have power and I tried to connect it to the USB via the PC; it didn't work. The phone was on, but the computer didn't even notice the phone was plugged in. That leads me to believe it would be a connection issue; but I'm not quite sure.
If anyone has anything they can add to this I would appreciate it, thank you.
P.S. Bringing it to a service center is a bit out of the question in the mean time seeing as it was bought on eBay and funds are limited for the time-being.
MiZi666 said:
hi,
try this: when your device is connected via usb, tab on the battery icon in the taskbar on you device, go to the register "advanced" and check/uncheck "When Device is turned on, do not charge the battery when connected to the pc"
thats it
greetz
mizi
Click to expand...
Click to collapse
Hello, I cannot find the "When Device is turned on, do not charge the battery when connected to the pc" in my device. My Rom is WM6.1 CE OS 5.2.20273 cooked by dvha79_ddt.
My HTC TyTN has the sample problem, but i can use the USB to charge normally. It cannot work using my AC adapter Only when the device is open...
About your Battery Issue.
I'll tell you exactly why ur phone isnt charging anymore... If you have been charging it alot on the USB or pretty much any!! charging on the USB u have killed ur battery, never charge your phone on the USB it kinda sucks they should make these phones able to be Sync'd thru USB without a battery cause these batteries should not be powered thru the USB over Time... from syncing to your pc will kill these batteries i have noticed that when u sync this Tytn Ithru USB and the device is at say 70% it charges up to 100% pretty fast i would recommand to you and anyone who reads this dont sync your TYTN or any HTCC phone for to long to the USB Cause it will Trash your batteries Life down the road... Hope this was HELPFUL.
Cheers
Paul
PatrikLaube said:
Hello
My Phone is working fine but i cant charge it with the original HTC adapter.
I must load the accu with a special loader.
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
When i plug in the USB Cable it doesent make everthing.
I think it was a to high voltage on the USB or the USB Ground ( - ) had a electrical Power for a litte moment.
Have you an idea?
Thanks for yur help.
Regards Patrik
Click to expand...
Click to collapse
hi, did anyone solve this problem ? ive got the same problem with my htc touch cruise, i think it charges when turned off but doesnt when on. the orange light doesnt turn on when i plug usb to charge it and it doesnt sync thru the PC neither.
Does anyone has a solution to this ?Thanks a lot!
does anyone has a solution to this ?
hi, did anyone solve this problem ? ive got the same problem with my htc touch cruise, i think it charges when turned off but doesnt when on. the orange light doesnt turn on when i plug usb to charge it and it doesnt sync thru the PC neither.
Does anyone has a solution to this ?Thanks a lot!
^I'm having the same problem with my herm200. I did the soft reset, hard reset changed ROMs but still the same problem. I don't think it's the usb connector because if it is it wouldn't have been able to charge the phone even if it's turned off. Before I'm able to charge it turned on but it would take a few minutes before the orange led turns on, but when I use the phone or if I receive a text the orange led would turn off it's like the charger disconnects but after a few minutes it would go back again. Now it just wouldn't charge turned on, sometimes it gets worse where it just wouldn't charge on or off.
Now I'm already planning to buy an external battery charger.
gypsygirl13 said:
^I'm having the same problem with my herm200. I did the soft reset, hard reset changed ROMs but still the same problem. I don't think it's the usb connector because if it is it wouldn't have been able to charge the phone even if it's turned off. Before I'm able to charge it turned on but it would take a few minutes before the orange led turns on, but when I use the phone or if I receive a text the orange led would turn off it's like the charger disconnects but after a few minutes it would go back again. Now it just wouldn't charge turned on, sometimes it gets worse where it just wouldn't charge on or off.
Now I'm already planning to buy an external battery charger.
Click to expand...
Click to collapse
Are you using an official 1000mA charger? (Not a 500mA one) 500mA ones work, but they are under-powered and can cause strange behaviour, like not charging whilst turned on or whilst on a call. Similar problems can be found with car-chargers that will not charge until the device is soft reset.
Mike
^no it's not the official charger, I have this usb wall charger called Power Juice (phone and mp3 charger).
Input Voltage: AC100-240V
Output Voltage: 5V
Output Current:1000mAh
Do you think it's because I'm not using the original charger?
fixed my charging problems
The boyfriend told me to try a new cable for my charger so he bought me a 5pin usb cable, tried it at home and it worked! I still need to turn off the screen sometimes but that's ok at least I don't have to turn off the phone anymore. Now my battery charges less than 3 hours.
Hold both SoftKeys and Then press the Power button
Or you can also hold both softkeys and then put your stylus into the reset hole.
answer why it does not charge through the usb
Sorry for the very very late response. Under electrical legislation all hand held electrical devices must be insulated and fused. Some of the chargers that you can purchase are sealed without fuse which indicates that the phone has a fuse contained within its circuitry (or there may be 2 fuses one in each device) .
The problem you have encountered is that you have connected your phone to a computer or mains supply to charge. There has been a surge in the electrical supply either on connection or by un-connecting from these supplies (e.g. connect to the computer as it is booting would see a 65w signal through the USB) and this more often than not blows the fuse which sits on the PCB (printed circuit board) just after the usb connection internally to the phone.
you can either have the fuse fixed for 20/25 gbp or you can purchase a new circuit board or you can use an external charger for the battery. As it is only the power input point that is faulty.
hope this helps
Since we are at this non-charging & battery issue, I would like to ask this question on the D838pro. My battery won't charge even after 24 hours of charging. The red LED blinks thru the whole process. The LED did not turn on to orange or green. It is the battery problem because my spare battery works well. I would like to know what is wrong with the battery as I am willing to strip down the battery. Could it be the battery circuit or wiring that had fired?
cyberdroxxx said:
Since we are at this non-charging & battery issue, I would like to ask this question on the D838pro. My battery won't charge even after 24 hours of charging. The red LED blinks thru the whole process. The LED did not turn on to orange or green. It is the battery problem because my spare battery works well. I would like to know what is wrong with the battery as I am willing to strip down the battery. Could it be the battery circuit or wiring that had fired?
Click to expand...
Click to collapse
Never tried stripping down a battery, some things... well, just don't seem worth it. However as a learning exercise it might be interesting. Without lots of testing on a good battery with a multimeter then I have no clue what the readings should be between all the contacts. (Now there's a little job for you) It is as likely the internal structure of the battery is screwed as it is to be a wiring problem.
If you solve it you can certainly report back here
Mike

Now my phone won't charge

Totally stock (but i don't think it matters).
Plug the phone in, orange LED comes on.
Hold it or place in on the counter five seconds later, LED is off.
Had the phone since 6/4.
Anyone else having issues?
Are you using the AC charger ? I have two Evos and one of the chargers does what you are describing. The orange LED comes on and then goes off after a while and the phone stops charging. Does it on both phones, the other charger works fine with both usb cables.
Are you using the USB charger with a computer or laptop or plugging straight into the wall with an AC charger?
This does make a difference because if you are charging with a USB + laptop combination you could be suffering from the computer going to sleep and disabling the USB ports power to conserve laptop battery life. If you are having the issue when plugging into the wall, try plugging into a computer and selecting the "Charge Only" option when your USB debug comes up. Once it does this, allow it to charge for a period of time and then turn the phone off, switch to AC power plug and see what happens.
Perhaps you had some kind of over voltage spike on the charger through the AC plug. I could see it possibly tripping something in the phone to stop taking charge to protect the handset.
Also make sure if you do use a laptop, use a USB 2.0 or better port. More power and faster connection. Gotta love it.
Your charger may not be sourcing enough current anymore (for whatever reason). I have seen the exact same behavior with USB car chargers that were only sourcing 100-150mA.
Have you tried plugging the USB cable into a modern desktop PC? (Some laptops have reduced current ports, so a desktop is a safer bet)
Its definitely a current issue. I tried to charge my phone using my bluetooth headset's wall charger, but I got the behavior you are describing. The bluetooth headset's charger just doesnt put out enough current.
Are you using the charger that came with the phone? if so, you may want to exchange the charger...
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
tarheelsmj12001 said:
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
Click to expand...
Click to collapse
Probably not a driver issue, but that that rail from the power supply is either undervolted (say 4.6V instead of 5V), or can't provide enough current (amperage) or both. If I recall correctly, the Evo needs 5V @ 1A (+/- 3% tolerance).
Phone not charging
my phone has been charging fine since I got it... even been using the night desk clock app while sleeping at night for the alarm with it plugged in... everything was good...
With my phone about to die today, I plug it in to the wall charger, the led/batter indicator shows that it is charging... then POW.. it says I have a low battery and it needs to be plugged in... WTH??? it is plugged in!
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Weird thing now is that I took my hero battery and put it in my EVO, plugged it into wall charger, and it stays charging... So, I put my EVO battery in my hero, plugged it in, and whola... it's now charging...
Please help as I am baffled.
MILH0U5E said:
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Click to expand...
Click to collapse
that's your problem right there. that custom kernel is known to have charging issues.
I'm having the same issue with my car charger consistently. Plus my AC charger less consistently. For example, I'll go to bed and plug it in, the next morning I wake up and see the phone is at 80% charge and isn't charging. At some point over night, it gave up. This is with the stock charger too.

Phone wont turn on, bad charger?

Last night I had a low battery. The screen was on and I hit the side power button to turn it off and nothing happened. The screen just stayed on. After several attempts to turn off the screen it turned off all together. I assumed the battery died. This morning I plugged it into my mini to micro adapter, which I have used before, and it still wouldnt do anything. No charging lights or anything. Tried three different mini USB cables and two different micro adapters. I get nothing on any of them. Are there supposed to be any lights on the phone while it's charging when the phone is off? I really doubt it's the chargers but I suppose it's possible. Does it sound like the phone is dead? Is there anything to check?
I would pull the battery out to force your phone to reset. Plug it in to the charger and and turn it on.
Tried removing the battery several times, still no luck. Today is the 31st day. If it's the phone, AT&T better replace it with a brand new one!
I held the battery from my fuze up against the Focus terminals and pressed the power button. It turned on. So apparently the battery is flat and not charging for some reason. Will try with the original charger when I get home.
n8huntsman said:
I held the battery from my fuze up against the Focus terminals and pressed the power button. It turned on. So apparently the battery is flat and not charging for some reason. Will try with the original charger when I get home.
Click to expand...
Click to collapse
You weren't using the original charger before? That's probably why you're having issues. I've had significant issues with it charging with any cable other than what came with it. No clue why.
Figured it out. I have 3 old HTC phone chargers (120v to mini usb) so I bought a bunch of the micro to mini adapters for $1 on ebay. http://cgi.ebay.com/Motorola-Mini-U...230750?pt=PDA_Accessories&hash=item41546be29e
When I use the old charger with the adapter, it will not charge. It does on my gf's HTC Surround though so I will give the wall plugs to her. When I use the new EBAY adapters with a standard usb cable plugged into a computer it works fine. They also work fine plugged into the included 120v to USB adapter. I also bought a couple generic 2 port 120v to USB adapters, http://cgi.ebay.com/NEW-2-Dual-PORT...694149?pt=PDA_Accessories&hash=item2eb1df4185 ,
and they too work fine with a standard USB cable and the ebay adapters. It's really odd. I'm not sure what the difference is inside the 120v to mini vs. the 120v to standard USB but it was consistent amongst all of them.
I had my HD2 USB adapter at my bedside for charging my HD2. Instead of changing the adapter to the new Focus supplied one, I just plugged in the Focus to the HD2 one. In the morning my phone was dead. HD2 Adapter will NOT work, no matter what I try. I even tried my wife's iPhone adapter, and same thing. Went to the Focus Adapter, and all is good now. Strange...
Also, USB Cable to PC works fine.
PS: I read somewhere that the phone will not charge if it's turned off. Have not tested the theory, but maybe related.
I don't get the charging issue. I found out today that my phone wouldn't actually charge with a stand alone micro charger that came with one of my old BT headsets. Seems to work just fine with my car charger using the provided cable but it still makes no sense.
It's only 4 pins and a ground how the hell do you screw that up?
n8huntsman said:
Are there supposed to be any lights on the phone while it's charging when the phone is off?
Click to expand...
Click to collapse
There are no lights anywhere to indicate that the phone is charging (other than the AMOLED screen). So, you have to check before the screen turns off. No LEDs to indicate a missed call or SMS, either - pretty annoying.
Another thing I noticed, when using the aftermarket wall-plug to USB adapter, even with the Samsung cable (USB to micro) allthough it does charge, the touch screen is very very sluggish. Takes several fast swipes just to get the phone to unlock. Can barely even type a word. This also occurs on my GF's HTC Surround. Weird indeed.
n8huntsman said:
Another thing I noticed, when using the aftermarket wall-plug to USB adapter, even with the Samsung cable (USB to micro) allthough it does charge, the touch screen is very very sluggish. Takes several fast swipes just to get the phone to unlock. Can barely even type a word. This also occurs on my GF's HTC Surround. Weird indeed.
Click to expand...
Click to collapse
That makes it sound like a software issue since it's two different manufacturers.

Charging problems - only charging over USB

Hi there,
I have a big problem with charging my Galaxy S4. It only charges with my notebook USB Port, my AC-adapter does not work.
In the battery menu I can see that AC is connected, when I plug my adapter in. But charging does not work with my device.
Over USB I can charge slowly. This isn't a software problem, I have done some resets and firmware changes since the problem.
Maybe my phone got a little bit wet earlier. Could this be the problem? Can I fix this with changing the USB port part of the hardware?
colli666 said:
Hi there,
I have a big problem with charging my Galaxy S4. It only charges with my notebook USB Port, my AC-adapter does not work.
In the battery menu I can see that AC is connected, when I plug my adapter in. But charging does not work with my device.
Over USB I can charge slowly. This isn't a software problem, I have done some resets and firmware changes since the problem.
Maybe my phone got a little bit wet earlier. Could this be the problem? Can I fix this with changing the USB port part of the hardware?
Click to expand...
Click to collapse
Already Tried to replace the charging cable?
Androiders96 said:
Already Tried to replace the charging cable?
Click to expand...
Click to collapse
Yes, I tried another cable but had no success
I dunno if I can ask it here, but i don't charge over usb, i mean it just "hold" the power level for me. Is that normal ?
Is your AC outlet working ?
Having issue where S4 only charges with USB and vibrates when using AC charger
I've been having some issues with my S4. I did recently get it a little wet, but it's working fine in all cases except charging. I have my phone next to my bed charging every night. I noticed it was dead one morning, but I figured I didn't connect the charger properly. The next night I noticed it was vibrating every 5 seconds or so, but the phone had turned off due to a low battery. Very strange behavior.
I realized that it would start charging, but it would stop between 1-3 minutes. The the phone would vibrate and not charge.
I've ready MANY posts from others with the same issue and someone mentioned their phone charges over USB. Seemed odd, but I tried it and voila, my phone charged perfectly. I have many samsung cables, none of which work. It's definitely not the cable. I can plug a samsung cable into my phone connected to AC and it doesn't work. I pull the USB portion out of the AC charger and plug into a computer and it immediately and consistently charges. The battery holds its charge as expected, so it doesn't appear to be a battery issue.
I've tried the developer mode options - no luck.
I've tried bending the charging prong - no luck.
I've tried blowing out the charging port with compressed air - no luck.
I recently got an update pushed to my phone (Sprint), but I don't think it was happening right after the update. Seems like a likely software issue.
I did get my phone a little wet recently, actually it was my young children throwing water at me.
I've read so many posts and nobody seems to have a good answer for this issue. Any suggestions are appreciated.

Categories

Resources