Anyone have a solution for this? I have my Wizard go to standby after a short time and always make sure it is in standby when I put in in my case. However, when I receive a call and pull it out of the case, I almost always press one of the buttons. So when I answer the phone I have the camera going, contacts open or the connection manager open. I use all the buttons so I don't want to disable them completly. I wash there was a way to disable all buttons except the answer button for like 5 seconds after a call starts ringing. Or, be able to set buttons to not activate unless pressed for 2 seconds or so. Or, require 2 presses to activate. Anyone have any ideas?
Thanks
Turn on the password (4 digit one is fine) and set to 0 minutes, the phone will "lock" as soon as you go into standby but when it rings you will be able to answer with the red/green buttons but nothing else until you put in your password.
Thanks, I will give that a try. I used a password before but it slowed things down so much that I removed it. I have done quite a bit of optimizing since then and will try it once more.
it does slow the use, and gets annoying (i still use it) but it does work until i find a decent app to do it. All it really needs is 2 touches or 2 buttons to unlock but not found anything yet... \
I have solved this with litle less work .I have Device lock Bar on the top, under date , so you need twice down and middle buton to lock the
device.
device lock doesn't seem to play well with the password application. if you have password activated you can do a device lock but when you put your device on standby and bring it to full power it is unlocked. if you use device lock without password it works.
any solution to lock keyboard during a call ? i always active some functions with my ears(...) when i speak
starseb - switch your phone to stand-by mode... the radio (phone part) should remain on, and you can continue calling. Then just switch it back on when done ( or not %) )
sorry for my english, but i make i make a mistake. i would say how to lock screen during a call.
bostjan said:
I have solved this with litle less work .I have Device lock Bar on the top, under date , so you need twice down and middle buton to lock the
device.
Click to expand...
Click to collapse
Is there a good way to unlock by pressing just keys?
Try christoph's deltaLock map it to a hw button then set it to be unlocked by the same hw button.
Anybody know if there's a way of keeping my Trinity in standby even when a text message comes through - I keep the thing in my pocket and if I don't look at it straight away after a text has come through, all kind of things happen - programs get launched, photos get taken, voice memos are created, just from it moving around in my pocket after un-standbying itself!??
Thanks
Lock the screen and when a text comes no programs will launch!
Nope...
Doesn't work...as soon as a text comes through, everything unlocks - is there anyway to stop this from automatically happening?
Thanks
flight mode
tjw2007 said:
Doesn't work...as soon as a text comes through, everything unlocks - is there anyway to stop this from automatically happening?
Thanks
Click to expand...
Click to collapse
Not so on mine when it is locked it stayes locked! The screen will come on but the machine stays locked.
What mine is doing is when a text comes through, it seems to be causing the device to unlock, because the screen will take touch commands - I need to be able to lock the screen and get it to stay locked even when a text comes through. Any experts out there who might know how to achieve this?
Thanks
What is flight mode anyway?
OK, let me put this another way - is it possible to lock the screen until you press the standby button, so that nothing else unlocks it such as a text message or phonecall?
Thanks
I don't have this problem. My screen is set to go off after 1 minute. When the phone is in standby, all I get is a tone and the orange light flashes. The screen will not come on, unless I press the power button.
No input is accepted when in standby by the screen or any button except the power button - check your settings
I also have it set to auto-lock after 2 hours, so even if I get a text, and turn the screen on, then i need to put the password in before the screen unlocks
i use my m700 the same as you with no problems
RESOLVED!
Managed to put the device lock option on the 'Today' screen and this keeps the whole device locked (screen & all) no matter what happens, until you press the unlock option on the screen. Hooray!
Hi all,
I have decided to uninstall S2U2 and I don't want any other locking applications. However, is there is a way I can have the standard device lock activated with a short press of the power button?
Currently I am having to hold the 'End call' button until it locks, then turn the screen off with the power button.
Thanks
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
If you push the hang off button for more than 10seconds, it will be locked
No...
FetchBLN said:
If you push the hang off button for more than 10seconds, it will be locked
Click to expand...
Click to collapse
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Good tip: works for me!
By the way: you can configure what happens when you pres the "disconnect" button too.
Guys
Thanks for this thread. I am very confused when it comes to locking the phone. Can anyone tell me...
Does the built in device lock work well? Will it keep the phone locked when a call comes in ?
If so, then why do people use S2U2 or other third party apps? Also some people say that S2U2 drains the battery. Is this true? How does it drain the battery?
The HD tweak had the disadvantage that when the screen turns in 'shaded' state the device is also locked.
Then when unlocking the device the screen stays 'shaded'.
avimak said:
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
Click to expand...
Click to collapse
Maybe it takes you 10 seconds to count to 3.
I've finally got there with locking my HD... I had a S710 before the HD, and I liked the fact that on that I could hold down the "end call" button, and that it would lock the phone and turn the backlight off. The screen would then turn off completely after whatever time I had entered (2 mins I think). And on unlocking the device the backlight would turn on.
On my HD I have now disabled the device password, but enabled my PIN request, so that it secures the phone if it has been turned off completely. This means that I can now hold down the "end call" button for 3 seconds or so and it locks the device (requiring a 2-tap process to unlock, like the S710). I have also used the standard windows mobile settings (power) to have the backlight automatically turnoff after 30 seconds, and have used HD Tweak (setting 4.1) to autolock the device when the backlight turnsoff. The only problem is that when AutoLock happens using HDTweak, when I unlock it the backlight fails to turn back on, even once I have started using the screen. Any ideas on how to fix this?
Dave
chaosdefinesorder said:
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Click to expand...
Click to collapse
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
james00000007 said:
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
Click to expand...
Click to collapse
Hi,
Is this similar to an application my friend had on his iphone. Basically, when he needs to use the phone, he needs to put in a pin to unlock. I think the Nokia E61 has a similar feature.
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
Can u let us know how to u set it?
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
i hav a qns, at the locked screen, when u rotate ur device, does the screen rotate as well???
i had tis problem whn using gyrator to lock, whn its lock at home screen, the screen wil rotate if i rotate my device. how to disable that???
davehodgkinson said:
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
Click to expand...
Click to collapse
Mhh, I also think it's very annoying. I first used the auto lock feature by setting
HKey_CURRENT_USER/ControlPanel/BackLight/AutoDeviceLockEnable = 1, but I also have the backlight-issue, which is really annoying.
I also installed S2U2, but after installing that program the battery-life was inacceptable. By now I'm using the manual method, pressing hang-up for 3 seconds. It works, but I often forget it, and it then happens easily that I press the hard-button which awakes the phone from standby and I make pocket-calls.
The auto-lock feature is also exactly the thing I need, except the fact that I get the backlight issue then. Does anybody know how to fix the backlight issue? Maybe by editing another key in the registry?
Regards,
Tobi
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
stm2008 said:
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
Click to expand...
Click to collapse
which application are you using now to turn off the screen? sounds interesting.
Tyrion84 said:
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
Click to expand...
Click to collapse
Yes, but when I activate standby and put the phone into my pocket, I often accidently hit the button again, which reactivates the phone. hit_one_button_to_unlock ist not tobi-proof
My practice is to turn off my HD after use (I use 3rd party app to turn off the machine instead of pressing the power button), and put it back to the pocket. Recently, I found that my HD have do something when it is off, such as,
- make a phone call
- Go the the TF3D Photo tab and viewing a photo
- Showing the Power setting page (I set it to the LSK)
I'm 100% sure that the machine is off, so I wonder if my machine got a problem?
are you REALLY 100% sure it is OFF and not only in standby (aka screen off)? there is a old version of a 3rd party app that when you tap the poweroff icon goes standby and NOT poweroff. you should disable the 3rd party app and shut down your device using the default power button.
instead if you like having it only in standby you should keep in mind that standby does NOT by any means autolocks the screen. I'll try to explain:
you put the machine in standby and put it back in the pocket. you receive, dunno, a ring or a sms or something else. automatically the screen turns itself on, activating the touchscreen, and then all hell breaks loose
there are some solutions to this: a long press of the end key enables the default lock feature of the device. then you can turn off the screen safely (or almost safely)
also you might want to install s2u2 and set it to autolock on screen off. you turn off the screen (either with your app or the power button) and when resuming you have a neat "slide to unlock" screen (iphone-like). This is the solution i suggest more.
I am quite sure i talked too much but i hope i've been useful anyway