My 2i's charging connector broke. Sent it back to O2's repair centre and they specifically said that the mainboard has to be changed. Anybody here know of any thrifty way to get hold of a mainboard or a something similar? Any help is greatly appreciated. Thanks.
Vincent
fixed same problem my self
Hi ,
I received a similar device from a collegue.
His charging connector was completely severed from his mainbord.
I opened the device and solderd it back on my self. Device is working again.
If you have te same problem maybe it's cheaper to find someone who can do this for you then looking for a replacement mailboard.
I have to say I had to try it 2 time because the connections where really tiny.
GreetZ
Rob
exactly...tiny...
You're right, it's very small, plus I have fat fingers. Well, maybe I should get someone to do it for me. I was hoping for a short cut solution and not too expensive one as well. I might try that after the holidays..
Related
Good morning,does anyone have any ideas on the following problem,on the bottom of my xda2 where the power plug goes into/docking station,it seems to sort of disapeared? just a big hole,and now i cannot charge it whilst driving or whilst docked unless i take battery out and charge in the aux slot.
Not sure what to do,is my xda2 now useless,any idea where i can get it repaired and the cost
thanks for any help offered
Nige
I sell the connectors on ebay - unless you are fairly confident with a soldering iron I'd get a mobile phone repair shop to do it for you. You may also have damaged other componants on the board when the socket was pushed up.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=5869809646
Richard
the connector is no longer available on ebay, any chance of updating link if is still available please
Can u sell me this connector?
Can u sell me this connector? I have Himalaya and I have broken synchro connector and I can't charge my MDA.And I have just one question, do someone have some manual, how I fixed this connector tu my MDA?Thank's a lot
nigelfish said:
Good morning,does anyone have any ideas on the following problem,on the bottom of my xda2 where the power plug goes into/docking station,it seems to sort of disapeared? just a big hole,and now i cannot charge it whilst driving or whilst docked unless i take battery out and charge in the aux slot.
Not sure what to do,is my xda2 now useless,any idea where i can get it repaired and the cost
thanks for any help offered
Nige
Click to expand...
Click to collapse
in ali mall upper ground floor cubao philippines, it cost me php780 for the fix. It was soldered back. The shop's name is brightpoint.
i have a similar problem, the bottom connector dropped out the other day a i need a new connector because all the pins are bent, does anyone know were i can get a connector from, i glued it back in place as a temporary solution, it worked fine until this morning and now it won't charge , so any help would be greatly appreciated
scotty
XDA II Damaged connection slot
Hi all,
I had the same problem with my XDA II, sent it for repair and it did exactly the same shortly afterwards, i bought a new battery and charged each one alternatively, but found problems syncronising and eventually gave up.
I have recently bought (my little gem) Xda Orbit, after many months examining what was on offer, I love it its is everything i expected and just a little more. Purchased a 2 Gig memory card and installed copilot on so i have sat nav and all my tunes. needless to say i have a spare Xda II up for offer for spares and such should anyone want to get in touch with me.
there is the Cradle and power charger, 2 batteries and it works well just as long as you dont want to connect it to your pc, anyway im new to this site, would be pleased if someone could point me in the right direction for Orbits here and please feel free to contact me, even if just for a chat and introduction. need to get established here.
cheers all, have fun and hopefully speak soon
Hi guys , i am PDA Technician , and i can sell and solder the connector to the XDA board perfectly , I am in Egypt Cairo
Tel : +20123382923
E-mail: [email protected]
Jimmy
you can find the connector here (it is the same type of IPAQ38xx)
http://www.ipaqrepair.co.uk/ipaqpart204.html
not very cheap, however.
thanks, recently aquired another xdaII, broken screen, sd card slot not functioning and a few other problems so i have taken it apart and i am using it as spares for my other,almost perfect, xdaII. so i now have the connector the connector, but thanks for the help and advice.
scotty
Scotty2690 said:
thanks, recently aquired another xdaII, broken screen, sd card slot not functioning and a few other problems so i have taken it apart and i am using it as spares for my other,almost perfect, xdaII. so i now have the connector the connector, but thanks for the help and advice.
scotty
Click to expand...
Click to collapse
these people sell the connector at a reasonable price
http://cgi.ebay.co.uk/NEW-O2-XDA-II...ryZ41343QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I hope someone can help...
In the process of replacing my LCD, i damaged the main ribbon cable (it has a small tear). Does anyone have one to sell or know where i could buy a new one??
thanks
Dean
Try here... http://www.gethightech.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=CS
and here... https://www.cellulardr.com/proddetail.php?prod=Cingular8525LCD&cat=125
It's amazing what that Google thing can do.
thanks for your reply - google is indeed a marvelous tool. Unfortunately, I've had no problems locating a replacement LCD, its the ribbon cable which i need - the one which connects the LCD through the sliding keyboard, also accommodating the camera and ear piece.
now, if you could pull that one from google, you've got a friend for life....
thanks
dean
Try it there:
http://www.diytrade.com/directory/g...bbon_for_Dopod_838_Imate_K-jam_O2_Mini_S.html
However, the one in the link is for the sister model. I was going to contact this firm to see it they have it for our Hermes too, but I'm waiting to see if I really need one - maybe later...
If you're successfull in finding one either at the above firm or elsewhere let us know!
Thank you / You're well come !!!
thanks microft - I sent an email to the company requesting a flex ribbon for the Hermes, I'll keep you posted on the outcome. I also found this mob:
http://www.factory2customer.com/index.php/cat/Home/cat_id/33218
The have all the parts but they appear to be only a wholesale operation. I'm also waiting to hear back from them.....
Anyone else got any leads???
It appears i'm caught by the boo-boo's. The only company authorized to stock the ribbon cable in Australia are Mobile Phone Solutions, who won't supply the item, just repair for quite a tidy sum. They also have quite a long waiting list.....
Is there anybody out there who can sell me one?
please...
Hi There,
I recently had to replace my screen with one I got from ebay. However being slightly careless I damaged the ribbon cable that connects the screen to the Mainbored
Has anyone got any ideas where i may be able to locate one of these?
attached is a picture of the damaged part.
Any help would be much appreciated
Thanks
Replacement Ribbon
Hi, You might want to try giving these people a ring or look on their Website as they sell parts for PDA's
http://www.turnonyourmobile.com/
Gez said:
Hi There,
I recently had to replace my screen with one I got from ebay. However being slightly careless I damaged the ribbon cable that connects the screen to the Mainbored
Has anyone got any ideas where i may be able to locate one of these?
attached is a picture of the damaged part.
Any help would be much appreciated
Thanks
Click to expand...
Click to collapse
You can order one from http://cnn.cn/shop/8525tytn-flex-cable-p-1732.html
That’s brilliant thanks, just ordered one. On the picture they have on there site I couldn’t see the black connecter which holds the cable in place. Guess ill see if it comes with it!
Thanks for you help much much appreciated.
can anyone say from where to get the flex cable nopw am in needliy urgent of the flex cable
sorry for my poor english
You can get both types on ebay(uk). Look for a username of shop-uk and they have both black and gold flex types (getting one myself to fix a hermes!). I think they are £15.99 GBP
In the middle of disassembling my Legend to replace a bad digitizer, I broke the ribbon cable connecting the power button to the PCB. I haven't reassembled it yet, but I can't see how it's going to work.
img710.imageshack.us/img710/6929/brokenn.jpg
img137.imageshack.us/img137/1346/powerkz.jpg
(Sorry I can't post links because of post count.)
If anyone knows what the best way to repair this would be, I would be most appreciative. Thank you.
EDIT:
It seems this is the piece I need to replace.
tinyurl.com/28a7t9u
tinyurl.com/36yj5tw
Anyone know where I could go about finding one of these? The part number turns up nothing on Google.
I would find a service center and ask there, or I would solder it , it's just two wires....
But be sure you purchase a part with the ribbon cable on it, what I've seen it didn't look like it was there...
Good luck...
Called HTC service center. Unfortunately they don't sell parts direct.
I thought about soldering it, however the ribbon broke so close to the base that I am not sure I would be able to get access to the conductor.
Anyone have a trashed Legend that I could buy for parts?
Hey guys just wondering if there is anybody in Melbourne or Australia or anywhere for that matter that may have a old broken HD2 (preferably T9193) that i might be able to use for spares ?? I currently have one and have dropped it and now it's colours are up the sh*t i have done a screen and digitizer replacement and without any luck the problem still persists any ideas would also be greatly appreciated
Ps. if i twist the phone in oposite directions the problem goes away which leads me to believe that something has come away from the board itself i have looked and cant see a thing any suggestion would be greatly appreciated
Maybe mainboard connector, have you tried applying pressure to connector socket/ribbon with it stripped but screen, mainboard rigged up with battery & bench test it while applying pressure to mainboard connector/ribbon with insulated/earthed tool.
maybe abble to fix it if can find out exact point of problem but most HD2 faults need replacement parts to cure faults long term ...