Database Users

p3600i user please help urgently

At 1st I run onlipro hardspl1.1 for p3600i after that sync ur pda the will send u to the bootloader screen when install fail after that unpluck the pda and the restart the romupdateutility and last the HARDSPL successfully install inside.
WHEN GO INTO THE BOOTLOADER YOU WILL SAW
TRIN100
IPL-1.00
TRIN100
SPL-3.20.Olipro
After that using same method go bootloader upgrade the radio version 1.56.70.11 also install succesfully
While going to bot the ROM inside through bootloader then run update utility
once starting to upgrade the rom 1 % shown the the pda auto disconnect and error message 270 shown
wth is this problem i read tons of comment but it is totalli invain
is there a diffrence between using window xp sp2 , sp 3 and vista
HOPE SOME PRO can help me on this issue i test all the ROM also same 1 % auto disconnect
ORIGINAL HTC ROM
RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship
AFTER CHANGE
HARDSPL Olipro 3.20
Radio 1.56.70.11
ROM stil maintain the same offical rom no way to change please help =(

pola100 I flash spl 3.13.0000 and I cant anything flash,please I SOLVED IT :-) LOCK

Hi,
I have htc polaris (pola100)
but I unwillingly flash spl version 3.13.000 but now doesn't go anythink flash,
don't go flash anythink other spl version (1.25.0000, 1.28.0000)
Please anybody help me.

You had to flash the original ROM of your Polaris before flashing the Original SPL.
Can you get the tricolor screen?

I have original spl but after I flash hard-spl v2 and flash not original rom,but this rom was very bad.
So I would back my original wm6.1 rom htc, so i find original three original spl (1.25.0000 1.28.0000 3.13.0000) I flash spl 3.13.000 but now doesnt flash anythink anythink spl and anythink rom
please and now?
(ps: sorry my english is bad)

but yes a see my bootloader , i see red blue green and white color
on the left side is write:
POLA100
SPL-3.13.0000
CPLD-2
and the right side is write:
RUUNBH

okay, I understand.
Isn't there any ROM flashed?

i tried rom:
3LIT3_VI_Full
udK_Syrius_R7_WWE
c_shekhar_Pola_WM3.13.755CS_Build20755_Public_Final
and original rom htc wm6.1
But all roms frozen near 0% on htc display

I think you've bricket your phone

but on this list:
http://forum.xda-developers.com/showthread.php?t=351964&page=28
he have same problem as I.
mtelleria mtelleria is offline
Junior Member
Join Date: Jun 2008
Posts: 6
Default Problems installing HardSPL
Hi,
I have installed the last official version on WM6.1 on my htc, now i want to install one custom rom from this forum.
I tryed to istall first HardSPL, but i don't know why, the process get stuck at 0% of the istall and never continue.
In the 3 color screen appear:
POLA100
SPL-3.13.0000
CPLD-2
Someone can help me?
Thanks
____AND THIS ALSO BUT OTHER SPL:
he write:
"donchischotte" donchischotte is offline
Junior Member
On the screen I read:
-------------
RUUNBH
POLA100
SPL-1.28.0000
CPDL-2
--------------
Here is what I do and what happens when I try to use HARD-SPL V2:
1) I connect the USB cable and the writing on the device changes from "serial" to "USB"
2) I run romupdateutility
3) I check "I understand..." + next
4) I check "I completed..." + next
5) on the PC a message "verifying the information on your PDA phone, please wait" appears and after a while the device switches to a screen with a progress bar at 0%, while on the PC the following message appears:
--------------------------------------------------------------
Current information about your PDA phone:
Image version:
Select from below:
UPDATE Update the current ROM version
--------------------------------------------------------------
6) I click UPDATE and the following appears:
------------------------------------------------------------------
Verify that you want to update the ROM version:
From:
Image version:
To:
Image version: OliNex-2.20
------------------------------------------------------------------
7) I press "next" twice and I get the message "updating the ROM image on your PDA phone", but the progress bar is stuck at 0% and after a minute or so i get the ERROR[262] : UPDATE ERROR
I tried usinr both Vista and XP, with or without MicroSD and SIM card. It's always the same.
I tried flashing different SPLs (even the two original ones) with the same problem. If I try to flash a ROM I get the ERROR [294] : INVALID VENDER ID"
after 1% progress.
I HAVE SAME PROBLEM

I think you must wait Olipro or another chef here to say you how to refalsh SPL with 2.40 version in command line

You can try to flash you original ROM via SD-Card.

what is the solution ? I have the same problem with :
SPL-3.13.0000
I can't flash ...

Now its workhttp uff;-)
I flash my polaris 10* and all of a sudden work.

Unlock CID from bootloader mode?

Hello
Can i unlock CID from Bootloader mode? Because my SPV M650 not turn on, only freeze on startup image, and i don`t have communication with Activesync. I can`t find oryginal ROM: Orange PL (ID=ARTE10000, CID=ORANGB10).
BR
AM

Shipped Rom
Follow this link for the official HTC wwe shipped rom
http://forum.xda-developers.com/showthread.php?t=290106
Once you have downloaded the rom open up activesync then FILE>CONNECTION SETTINGS then uncheck ALLOW USB then close.
You don't need activesync to flash a rom as long as you notice the word USB at the bottom of the bootloader screen you will be able to flash a rom in the normal manner.
When the rom screen asks you about activsync connection just click OK and all should be well

I have the same problem like aplauz and "ROM version 1.12.405.01 WWE (Official Ship version)" doesn't work

You can not unlock the CID from the bootloader. The reason is that you need to install two .cab files into the OS which is impossible from the bootloader screen.
The only other way around this is to find a Cooked Rom with no ID (ie. no IPL or SPL) or if you are with T-Mobile you can download the official WM5.0 Rom from there website.
Hope this helps.

[blackstone][how to keep your stock spl][and flash cooked roms]

USPL does not make any permanent changes to your device. It operates from volatile memory (RAM) and once the device is power-cycled, no traces of USPL remain there. As long as there's a valid SPL flashed and starting up, you can run USPL to help you solve many other troubles.
Therefore USPL itself is safe and can NOT damage your device. You CAN... USPL is not foolproof; inrepairable damage can be caused through incorrect use of USPL, so be cautious.
Unless you know what you are doing, NEVER:
- flash an unsigned/cooked ROM/SPL/Radio/Splash/etc... that wasn't tested by someone else;
- issue SPL commands known to be dangerous or if their purpose is unclear or unknown;
- upgrade/downgrade SPL using USPL.
Again, USE AT YOUR OWN RISK.
USPL is highly experimental. It is alpha software, and it will remain such forever. This is version 2.x of USPL for HTC Blackstone (HTC Touch HD) only. Please don't try it with any other devices! It will not cause damage, but it won't work either.
SPL comes as a single Windows executable - blac_uspl.exe. blac_uspl.exe is a console application developed and primarily tested on Windows XP. As of version 2.2 USPL should work in Windows Vista as long as RUU does; if you are still having problems with USPL under Windows Vista, consider downgrading HTC Sync drivers as described in http://forum.xda-developers.com/showthread.php?t=291723. Sorry Linux lovers, no version for you You may be able to run it from Wine, but I didn't try.
By default Blackstone USPL loads SPL 1.14 (or SPL 1.15 starting from version 2.4) patched to allow flashing of unsigned/cooked .nbh files. You can specify a different SPL (for example HardSPL or MFG SPL) to be loaded instead via command line.
New:
cRaCKwHoRe developed a GUI for USPL for those not familiar with command line, see http://forum.xda-developers.com/showthread.php?t=508361 It makes USPL a better experience, check it out!
Download the latest USPL attached to the second post of this thread and extract anywhere on your computer.
Go to ActiveSync properties and disable "Allow USB Connections" option. Turn off your device (long press "Power" key or remove/replace battery), then enter SPL bootloader mode (tri-color) by pressing and holding "Power" and "VolDown" keys simultaneously.
Connect USB cable and make sure "USB" label appeared in the white portion of the screen on your device.
Execute blac_uspl.exe; current status and any error messages USPL encounters will be displayed in the console window.
If everything goes well, your device will restart and SPL version label should read "1.14.USPL" indicating that USPL was loaded successfully.
If SPL version does not include "USPL" or if the screen is black, soft reset and try again. If "USB" label disappeared and did not reappear, reinsert USB cable.
You can then start RUU update to flash RUU_signed.nbh. Once RUU update is completed, device will restart using regular flashed SPL.
If you want to flash from SD card instead, make sure your SD card is not inserted when you enter the bootloader originally.
SPL will try to install it and would fail if blacimg.nbh is not signed by HTC. Insert the card after "USB" label comes up in SPL but before running USPL.
You can run "blac_uspl.exe ?" to get command line parameter help. Only 1 parameter is accepted and that is the name of an SPL file you want to load. You can load an MFG SPL or HSPL. USPL automatically takes care of allowing unsigned/cooked ROM flashing with any SPL you use.
11. Limitations
USPL relies heavily on multiple bugs specific to certain SPL versions, so it will only work on devices running **SUPPORTED** SPL versions.
The following Blackstone SPL versions are currently supported by the latest USPL version:
SPL 1.13
SPL 1.14
SPL 1.15 (TELSTRA)
SPL 1.19
SPL 1.54
If you run it on a device with unsupported SPL, an appropriate error message will be displayed and USPL will not run.
If you have a device with unsupported SPL version and you want to add support for it, please PM me to discuss.
blac_uspl.exe may not work in Windows Vista, unless HTC Sync drivers are downgraded. The ultimate solution to this problem is to use WinUSB instead of HTC Sync, this enhancement is not planned at this time though.
http://forum.xda-developers.com/attachment.php?attachmentid=139143&d=1229909942
http://forum.xda-developers.com/attachment.php?attachmentid=140357&d=1230349315
http://forum.xda-developers.com/attachment.php?attachmentid=147641&d=1232252513
http://forum.xda-developers.com/attachment.php?attachmentid=155089&d=1234063953
http://forum.xda-developers.com/attachment.php?attachmentid=172988&d=1238910821

Hermes bricked please help!

hello
my english ist not perfect but i think that i can describe my problem.
i have a herm300 (is written in the back of the phone).
IPL-1.01
SPL-2.03
I tried to flash my hermes with an other language Rom. I've forget to install hardspl. At 40% my device has reboot. I cant boot into OS. It freezes on HTC picture.
My device is CID locked. From germany T-Mobile.
Mtty tells me that my cid is: T-MOB101
If I try to flash the Hermes with a shipped rom, it reboots always at 1%. And it gaves an error like Invalid Vendor ID. Flashing with SD-Card brings an error, too.
In the Bootloader i see this:
Herm100
IPL-1.01
Herm100
SPL-2.03
Is my device now an herm300 or an herm100?
Please help me to flash it back!

temel007 said:
hello
my english ist not perfect but i think that i can describe my problem.
i have a herm300 (is written in the back of the phone).
IPL-1.01
SPL-2.03
I tried to flash my hermes with an other language Rom. I've forget to install hardspl. At 40% my device has reboot. I cant boot into OS. It freezes on HTC picture.
My device is CID locked. From germany T-Mobile.
Mtty tells me that my cid is: T-MOB101
If I try to flash the Hermes with a shipped rom, it reboots always at 1%. And it gaves an error like Invalid Vendor ID. Flashing with SD-Card brings an error, too.
In the Bootloader i see this:
Herm100
IPL-1.01
Herm100
SPL-2.03
Is my device now an herm300 or an herm100?
Please help me to flash it back!
Click to expand...
Click to collapse
hard reset your device then reFlash with Official ROM for Hermes

thanks fpr your reply
but it dont help.
always wrng vendor id. or the flashprog. is not for my device.

temel007 said:
thanks fpr your reply
but it dont help.
always wrng vendor id. or the flashprog. is not for my device.
Click to expand...
Click to collapse
One of the error message will appear when you use the wrong RUU to upgrade. Bill will check whether the ID Model and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.

temel007 said:
hello
my english ist not perfect but i think that i can describe my problem.
i have a herm300 (is written in the back of the phone).
IPL-1.01
SPL-2.03
I tried to flash my hermes with an other language Rom. I've forget to install hardspl. At 40% my device has reboot. I cant boot into OS. It freezes on HTC picture.
My device is CID locked. From germany T-Mobile.
Mtty tells me that my cid is: T-MOB101
If I try to flash the Hermes with a shipped rom, it reboots always at 1%. And it gaves an error like Invalid Vendor ID. Flashing with SD-Card brings an error, too.
In the Bootloader i see this:
Herm100
IPL-1.01
Herm100
SPL-2.03
Is my device now an herm300 or an herm100?
Please help me to flash it back!
Click to expand...
Click to collapse
i hope this will help you. i had the same problem and i solved it las night.
you HAVE to flash the original ROM that its locked for - the cid as i can see is for this rom
http://rapidshare.com/#!download|133tl|24566916|HER_TMDE_1211113_1050200_GER_SHIP.exe|51835
as it has the CID lock that your device has - T-Mobile German T-MOB101 1.21.111.3 06/20/06 ?? 1.05.02.00 32.36.7010.04H 14955.2.3.0 2.3 1.04 106 1 look at this table http://forum.xda-developers.com/wiki/index.php?title=Hermes_Upgrades
and remember,after flashing with its original rom CID UNLOCK IT then flash any rom compatible with your hermes.
i had hermes 200 and it did the magic, no more frustrations for me
hope it works for you