Seeking very simple instructions, Downgrading on SMT5600 - HTC Typhoon

I bought a Audiovox 5600 from online that already had WM5 on it. Well I was looking for ways to downgrade it to WM2003 but all I could find were instruction I did not understand. (I never install programs on it and is clueless about a bootlogger)
And now by coincidence, my phone has the cprog.exe error...so now I really have to do something about it.
I read http://wiki.xda-developers.com/index.php?p...grade_to_WM2003
Is there a simpler explaination on what I need to do? (or more detailed/step-by-step)
Thank you for any advice

http://ronswens.technoboard.ws/tutwm2003.html

Yea, something I can understand! I'll try it as soon as I find my activesynce cd.
Thank you

Related

NEED HELP WITH AT&T SX56

Hi.
I have an AT&T SX56 and i'm trying to upgrade the ROM, but NOTHING does te job.
I have Windows 98SE and am trying to upgrade while the device is in the cradle and the activesync shows communication with the device.
can someone explain to me - LIKE A TOTAL IDIOT - how to upgrade and what I need? I really will appreciate it.
Solomon said:
Hi.
me - LIKE A TOTAL IDIOT - how to upgrade and what I need? I really will appreciate it.
Click to expand...
Click to collapse
Definitely LIKE A TOTAL IDIOT,
please go through the forum, you will get all answer!
Describe what you have done so far in your attempt to flash the rom. Also your current rom version and radio stack.

K-Jam English ROM

Goodmorning,
I have one MDA VARIO (UK), where can I find the I-mate K-jam ROM Freeware (English Version)?
And it’s very difficult to install this ROM in my MDA VARIO? (I will must first Back Up my old ROM), how becomes this?
I hope to help me...
Thanks
Hello molf48,
In the ftp there is the rom you want (K-JAM_WWE_1010903_106_10110_ship.exe).
For the other questions, i'm sorry i don't know the answer/s.
I hope some1 guru will help.
you don't need to backup your rom unless you plan to revert back to the original rom in the future. This might or might not be needed in case of a problem with your phone and asking for a repair during the warranty period.
The steps you need to take are:
a. READ THIS FORUM and also the WIZARD UPGRADE forum - take 1 hour of your time and read read read... many people have upgraded.
b. Unlock the Vario and also the CID - using the Lokiwiz utility - read before you unlock - read a lot until you understand what to do.
c. Donwload an I-Mate rom and simply install it by double clicking on it... however like always - READ READ READ
Thank you for your questions and for your time,
Where I can find this ROM? I will go to Google and put the FTP (K-JAM_WWE_1010903_106_10110_ship.exe)?
But can you tell after me with simple steps how flash the new K-JAM ROM in my MDA VARIO?
It’s my first PPC and I don’t know how?
Thanks you
I will answer you even though it is clear that you are not reading the forum.
Once you have unlocked your device using the lokiwiz - upgrading is very simple - you just activesync your device (connect it via usb to your computer - while microsoft active sync software is running - make sure you have the latest one), make sure you have enough battery in your device (it;s best to have 90% or more left) and then simply run the I-Mate upgrade file. And... wait ... and follow the instrucitons on screen.
If my explanation is not clear enough then I suggest you read. It's not fair to help people that just simply won't read. I can assure you that all of what I have said above is written in a much clearer way in the fourms.
Good luck and READ.

SPV M3100 - can I de-orange it?

Hi,
I have just baught a HERMES (SPV M3100). Orange has set it up so I cannot use many websites (googlemaps etc). What do I need to de-orange it?
Also - can I get a new active sync? (the one that came with it doesnt sync contacts and doesnt sync with microsoft outlook).
I think maybe I need to Cook or flash my HERMES?
Sorry that these are basic questions. I have read the Wiki, but am no familiar with al the terms.
appreciate any help or just a pointing in the correct direction
Thanks!
Scot
I can suggest you to search the forum
You can use the search function inserting any of the questions you posted above.
I got an SPV M3100 and I flashed it with various roms.
It's a simple process if you follow ALL the rules.
you can start from this page:
http://www.mrvanx.org/hermes_guide/schap
Following this guide you can unlock your device and flash new roms
I can help you if cannot find what you want here in this forum
You're welcome
unlocking
Thanks for that link Elehicmo,
It is very helpful for me a (complete novice).
So to unlock a device I need to Flash HardSPL which is a modified bootloader ? (have I got these terms correct)?
If I stop after the flash Hard SPL stge will I have the same device as before, unlocked?
Few things I wasnt sure about, after reading the site:
"If your SPL version is 2.10.olipro then you ALREADY HAVE HardSPLv7. You do not need to flash it again."
How do I know if my SPL version is 2.10.olipro?
This step is not mandatory but if your radio version is "1.20.31.10" or below
How do i know if my radio version is "1.20.31.10" or below
Can you give me any suggestions as to whether Full, medium or vanilla version of Dutty WM6 v2 would work the best for me - I do not yet have memory storage but I wouldn't want to miss out on key features of WM6
Many Thanks, appreciate any direction with these questions.
Scot

thinking of upgrading......pls help

im thinking of upgrading to xplode's WM6.1 Pro CE OS 5.2.19209 (Build 19209.1.0.2). took me quite a while to consider this upgrade, though.
but before i do so, i want to upgrade my radio rom and bluetooth stack first. question, what's the latest radio rom? is it 1.15.00 as i have read in the wiki? and how about for the BT stack version, is 1.0.0.3900 the latest? coz i've searched and found a 1.7 or something like that(its kind of a large jump from 1.0.0xxx version to 1.7, don't you think?). oh, it says BT broadcomm 1.7.1, are those the same thing?
please, could someone give me some information about these. im not new to upgrading ROMs, im on wm6 now.(so stupid of me not to upgrade the radio and BT stack for wm6, though. just bare with me) thanks guys.
oh btw, are there some more steps i need to do before the rom upgrade?
the latest radio rom is 1.15.00
you don´t need to update bluetooth stack, because it´s only a driver for wm 2003 se.
hope that help !
thanks. so all i need to upgrade right now is the radio version? oh, btw, i wanna do a ROM dump so i can backup my current ROM to an SD card. but the link in the wiki seems to be not working. i remember that a file or program is needed to do the dump.
you need Multi-Port/USB TTY
it´s the attached file.
greetings from germany
David
thanks again. i still cant open that part on wiki, it just says "problem loading page". all i need to do to use this file is just run it? no other instructions?
edit: there is an included .txt file on the zip which i think explains how to use the file, i couldnt read it coz its in german. sorry.
Read, read, read!!!
zhenius said:
thanks again. i still cant open that part on wiki, it just says "problem loading page". all i need to do to use this file is just run it? no other instructions?
Click to expand...
Click to collapse
Before you do anything it is strongly recommended to read the usage of the mtty app because you can screw your device with an inappropriate usage.
Just an advice because mtty is a service app.
I suppose you should wait till that part of the wiki will be available again.
Or try Google
yeah, i am actually doing a lot of reading right now. im gonna search for info on this mtty. thanks. oh, something i've read on a thread, its not necessary to do a hard reset after radio upgrade on wm5. how about in wm6? do we need to do a hard reset? so i wouldnt have to do a ROM dump. just so i could slash out some steps in doing this upgrade.

Looking for WM5.0

Anybody have 5.0, would kindly link me to
what kind of phone do you have?
is it a herald, terra, wing, or some other variation of the herald?
In any case, you can use any of the wm5 RUU, but you have to find a way to remove the SPL.nb part of the rom (I think)
Ivan, itje, or ttran should be able to tell you this, so you them i refer you. Normally, i would also tell you to search in the future, but this is question is relatively abnormal. May i ask why you want WM5?
ah cheers for that, its a herald. I just googled what you said, and got this http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=22&Itemid=27
I dont like the new WM6.0 want to go back to 5.0
What's up with WM6
dpraved,
What don't you like on WM6?? I'm still using WM5 & been thinking about upgrading to 6.
dpraved said:
ah cheers for that, its a herald. I just googled what you said, and got this http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=22&Itemid=27
I dont like the new WM6.0 want to go back to 5.0
Click to expand...
Click to collapse
Be careful when you have an SPL that is lower than 4.0.0.0... in any case, what did you not like about WM6? (Or WM6.1 if you tried that.)
I found it slower, and generally like 5.0 better. But seems i cant find any 5.0 anywhere ..

Categories

Resources