Related
ok.. I read a couple of threads regarding this issue but could not find any solutions. one guy said that ak3.3 fixed his problems but 3 have a spv m3100 and I don,t know wich update pack should I choose besides cingular wich doesn't have video calling.
Any thoughts?
Doesn't anybody have the same issue and managed to solve it?
I had the same issue when I upgraded to WM6, I fixed it by installing the GPS radio ROM. This fixed it straight away.
In installed the latest 1.35 ROM and that did not fixed it and even with XDA live that did not work. Where can I find the GPS Rom?
andrei318ti said:
Doesn't anybody have the same issue and managed to solve it?
Click to expand...
Click to collapse
My 8525 was disconnecting from my car constantly after getting the phone a few days ago. My TyTN never had this problem. Even after installing the exact same ROM onto the 8525 that was on my TyTN I still had the same problem.
Basically, after a minute or two of being connected to my car the bluetooth on the phone would turn off. It didn't just disconnect. It turned off completely. This phone did it just like the Treo 750v (very unreliable phone by-the-way) did.
The problem appears to have gone away now that I have installed WM6 on my 8525. I have not done anything special to get it working aside from installing the LSVW WM6 ROM. It is definitely worthwhile to give it a try.
I believe that 1.35 is the "GPS enabled, but not initialized" rom.
OJ2000 said:
I had the same issue when I upgraded to WM6, I fixed it by installing the GPS radio ROM. This fixed it straight away.
Click to expand...
Click to collapse
I had it fixed by changing the registry values for bluetooth power saving. Upgrading to VM6 and to radio rom 1.35 (gps enabled) bringed back the problem... now I cannot find anymore what registry value I had changed...
stepir said:
I had it fixed by changing the registry values for bluetooth power saving. Upgrading to VM6 and to radio rom 1.35 (gps enabled) bringed back the problem... now I cannot find anymore what registry value I had changed...
Click to expand...
Click to collapse
Ohhh....please try to find them because I searched high and low and still no solution.
Try this:
http://forum.xda-developers.com/showthread.php?t=245887&highlight=bluetooth+power+saving
Ok I tryed the small fix on that link and did not work at all. I also inslled WM6 LSVW and still nothing. Any other ideas?
Try this: "jetware.hands-free.extension.1.24".
Installing the leaked Cingular ROM fixed the problem for me. Prior to this, it would connect briefly, then disconnect, and would come and go, but mostly would not connect. Now, every once in a while, it disconnects very briefly, but for the most part is solid.
Tryed jetware but still no go. Any other idea? doesn't anyone that has a hermes use a car handsfree bluetooth system? From what I know all devices suffer from this?
Nothing? Hasn't anybody found the solution to this problem? From what I read it happens to almost all hermes devices.
Yes, had the same problem.
Have a SPV M3100 with the Audi A4 Bluetooth (part of Gen II GSM Prep).
My old MDA Vario worked flawlessly.
SPV3100:
1. Pairs and makes / receives calls.
2. After 10-15 Mins calls are not routed through car kit.
3. When making / recieving call after 10-15 Mins, handset thinks its connected to handsfree (headset symbol in phone dial pad) but car does not pickup call hence no handsfree and no sound in handset ear piece!
4. Occasionaly, handset reconnects to car handsfree automatically on an incoming call.
5. Connection of in car charger SEEMS to improve realiablility.
6. Switching Bluetooth off then on on the handset will initiate a new connection that again works for 10-15 Mins.
Mark
temoore said:
Installing the leaked Cingular ROM fixed the problem for me. Prior to this, it would connect briefly, then disconnect, and would come and go, but mostly would not connect. Now, every once in a while, it disconnects very briefly, but for the most part is solid.
Click to expand...
Click to collapse
I get the problem with the new rom also, have been using it for weeks now. The new ROM does NOT resolve the issue, at least with the Acura HFL system.
So it seems that there is currently no fix to this issue.
bsica said:
I get the problem with the new rom also, have been using it for weeks now. The new ROM does NOT resolve the issue, at least with the Acura HFL system.
Click to expand...
Click to collapse
Well, it did resolve it on my '07 Audi Q7.
I tried to contact HTC and this is what I got
Thank you for your enquiry. An IMEI check of your device indicated that it is a network branded phone.
IMEI:? 357719003647231? Network: Orange Romania SA
Unfortunately we do not offer technical support for network branded handsets, as both software and hardware can be altered by the network provider.
Please contact your provider for any support that you might need, including repairs and software updates.
Click to expand...
Click to collapse
Can anyone with a TyTN contact HTC and ask for a solution?
Thanks temoore,
Looks like I need to get my boss to upgrade my car from A4 to Q7 to get the phone hands free to work.
It just might work.......;-)
Hi,
Can't find anything in any other threads so here goes..
My M3100 (TYTN) turns bluetooth off when I turn off my Sony HBH 300 BT earpiece.
It doesn't happen everytime, maybe 50% of the time. It wouldn't be a problem but during the working day I connect and disconnect maybe 10 to 20 times and when I get back on the road and fire up the earpiece I suddenly find no BT.
I'm normally not in a place where I can safely stop to go through the connections screen to re activate it....
Not had this problem with any other phone, Nokia, SE etc...
I think it also happend once or twice after turning off my TomTom One whilst running the traffic BT connection to my phone...
It is getting to be a pain, so much so I'm considering using a OLD Nokia instead of the M3100. Only advantage is the M3100 allows more than one BT connection at the same time although you do have to connect the BT earpiece before connecting to the TT One unit...
Any ideas how I can stop it turning off without ME actually turning it off, never happens anyway, I just leave it on...
HELP !!
Phil-w
I have a similar problem and would love to find an answer before my 30 day return period is up! I haven't been able to find out WHY my BT radio always shuts off, but about half of the time I get in my car the BT is off. This - and the MS Voice Command hack not working with my particular HF - is going to make me return this thing.
BTW, I have Cingular 8500 with stock WM5.
Worked for me
Hey guys. I had a similar problem a while back.
I had installed a comm manager, and my BT was randomly shutting off. After getting some responses, I uninstalled the updated comm manager, everything has been working fine ever since.
I would recommend following the same course of action. If you don't have the original installed, maybe try installing a new one.
I recommend keeping the phone. It's great. There is SOOOO much you can do with it. If you are unlucky and got a lemon, that's a different story.
But I do not think this problem is common... good luck.
Last week I updated my ROM to the latest official AT&T release, and my BT problems *appear* to be solved.
I hope someone is able to help me.
Okay I have the Wizard, upgraded to Wizard Mobile 6.
Shortly after, all my bluetooth devices (car kit, headset...) had their microphones die. In other words nobody could hear me when speaking through any kind of bluetooth.
I then flashed the Radio ROM to a different version, and bluetooth was repaired. But now the problem has returned for no reason.
Why does my Wizard's bluetooth audio in keep failing, yet its speaker works fine and I can hear other people?
Is there a recommended update to the Bluetooth Stack I can try?
CJSnet said:
I hope someone is able to help me.
Okay I have the Wizard, upgraded to Wizard Mobile 6.
Shortly after, all my bluetooth devices (car kit, headset...) had their microphones die. In other words nobody could hear me when speaking through any kind of bluetooth.
I then flashed the Radio ROM to a different version, and bluetooth was repaired. But now the problem has returned for no reason.
Why does my Wizard's bluetooth audio in keep failing, yet its output works fine and I can hear other people?
Is there a recommended update to the Bluetooth Stack I can try?
Click to expand...
Click to collapse
I do have exactly the same problem. After flashing XDA Mobile 6 Release 3, microphone has worked for couple of days, and then suddenly died. Interesting, microphone is working with Notes but not with phone. I went back to
XDA Mobile 6 Release 2 for some other reasons (read: 2MB more free memory for critical application) but the problem with Bluetooth microphone remains. Radio is 2.25. Any advice?
--
Pogo
There are also at least 3 people at the Wizard Mobile 6 thread with the same issue. Very surprised none of the experts here have been able to propose a fix. Makes the phone virtually worthless if you can't use it in the car etc.
As a workaround, I have found if you mute then unmute the phone volume, the issue is sometimes temporarily resolved for a short time. It always comes back though
I have been asked to join this thread. Per a PM:
We love the ROM you have provided, and are very thankful, however it was not until installing it that this issue arose. It does not seem fair to leave a number of people with a phone that is unusable for 'phone calls'.
Click to expand...
Click to collapse
(Bolding added by me)
I don't know what to tell you. If the rom doesn't work for you, then don't use it... Don't tell me its "not fair". I use MS Voice Command, and XM6r3 and have never seen this issue with my Bluetooth headset (Jawbone). I've also tested this out with a Plantronics Explorer 210 headset that I have and it has not problems with XM6r3 either. My A2DP headset (Spider) also works fine on XM6r3 with MS VC. I've stated this in the past when people have said they have BT issues on my rom. Sorry, but I can't reproduce it, so its hard for me to fix something that isn't broken for me.
Try this... Do a hardreset on your device (take a backup first if you want), then leave it as the base rom with NOTHING extra added. Run that way for a few days (how ever long it has taken before) and see if the problem happens again. If it doesn't then its not my rom but something being added to it (probably screwing with the registry someplace). If it does happen, then as I've stated before, I've seen a number of BT devices be flakey on WM6 (especially car kits). Try a different rom then. If someone with the problem can pin it down, I'll be happy to do what it takes to fix this issue if its something in the rom that is causing it.
Thanks mfrazz. What wasn't fair was not the bug, but that you had not responded to previous mentions of it, i.e. not fair to leave us with it. We love the ROM and put a lot of our life in your hands in a way, as we rely on our device so much for work and play. Hope you understand.
Now then, I have already tried a hard reset and the problem never occurs, until WM6 is put back on. Sure, 'use another ROM' is all very well, but we love yours - again, hope you appreciate the sentiment. If you're in a relationship, are you the kind of guy who tells a girl who loves you, 'find another boyfriend', or do you try to make it work
SO, I am wondering if this is related to the glitch you mention where sometimes when switching out of vibrate mode, the ring tone becomes muted. For that, your solution is to play the ringtone again, then it becomes unmuted.
Similarly, our Bluetooth devices mic's are being muted, and if we mute then unmute them again, then they become unmuted. A link that helps point you in the right direction?
Please note, this is not certain bluetooth devices being 'flaky', this is ALL devices. 4 at the latest count, including rock solid Nokia CARK7W car kits and Jabra headsets.
Some people put it down to MS Voice Command, which I have never installed. What does that program do, do you know, to cause the bug? Again I hope that might help point you in the right direction.
Please don't dump us Let's try to fix what is wrong in this relationship
BT problem solved?
CJSnet - not sure if you have resolved this. I was having the same problem and noticed people with reTouched dialer were not, so I loaded that dialer and the problems went away. I am using a Plantronics Voyager 510. Seems the problem might be with the standard dialer.
Hope this helps
CJSnet said:
There are also at least 3 people at the Wizard Mobile 6 thread with the same issue. Very surprised none of the experts here have been able to propose a fix. Makes the phone virtually worthless if you can't use it in the car etc.
As a workaround, I have found if you mute then unmute the phone volume, the issue is temporarily resolved for a short time. It always comes back though
Click to expand...
Click to collapse
Thanks, I'll give that a try. However WM6 has pretty much finished the Wizard for me, and I'm hoping to get a TyTN II soon as a replacement. Shame.
Hi all,
I'm running original WM06 ITA on my x7500 and I'm experiencing this problem:
when I receive a call I can't answer with my BT headset because X7500 BT is turned off even if it was on, so that I have to activate it again. So the problem is that X7500 BT turns off by itself very often in a day. How can I solve this problem? Any fix available?
THX so much!
hi
i have the same problem. this thing happens 2-5 times a day to me. the wicked thing is that somtimes it works perfect 1 or 2 days and when you think no everything is fine 'pop' its there again. fact is that bluetooth simply disappears, the indicator on athena is still blinking blue and the commanager tells bt is on, but my bt-headset (and other devices) signals that the bt connection is gone, also other devices cant find the athena any longer. i have to disable/enable bt in the commanager to get the functionality of bt back. i was thinking about returning the device for repair, but fearing the discussion of not using the original rom (the one with the superugly optical improvements of the provider ). and because maby it's a rom problem. my config is:
htc rom 2.21.407.1 (07/18/07) with extrom:2.21.407.101.
3 bt-headsets 1. sony hbh-ds220, 2. moto s705 and moto ht-820. all 3 are working fine with my universal but having these problem with the athena.
madbird
Hi...so we have the same problem...
I have the original HTC ROM just restored on my device and I have the problem. I read about it somewhere, other people with same problem but I can't remember where...
yes we are not alone i found serval posts on the net for htc and other brands like these:
http://forums.wireless.att.com/cng/...thread.id=27495&view=by_date_ascending&page=1
http://www.howardforums.com/showthread.php?t=867111
but no solutions. the only meaningful thing was for wm5, there is a fix of the bluetooth stack by microsoft (http://support.microsoft.com/?scid=kb;en-us;913683&x=13&y=14) but i did not found one for wm6.
mad
Hi guys.
I'm sorry to say that I had, a long while ago, the same problem with my Universal, and after a whole lot of tweaking, tinkering, and kinky massaging, all that was left to do was to have the device replaced. It definitly was a hardware problem, alas... :-(
I've had mine almost 4 months, stock 7501 ROM, and no problem like that ever. I leave BT turned on all the time. Sounds like a hardware problem.
been there done that fixed that
hi all,
yes, until I found the coolest und most functional BT headset, the cheapy prior ones caused same faults, even to the point of a hard reset ... why, well
no help to be found, just the notion of thinking and knowing, that the cheapy hardware out there was casuing it, not the htc.
example, some devices go into a kind of sleep mode and disconnect if not used, then while the htc still thinks its connected, it gets no reply from your other BT device. Take many SW packages or HW devices on your PC even, unplug the network and u´ll see, even they have unforseen problems ...
have fun, try HW makers like HAMA or Samsung, they rarely disappoint.
ollli
Aaaahhhh, I'm not alone.
Same problem here, but ONLY afair with WM6 (I'm using WM6, T-Mobile Germany). I can't remember, that I had this problem with the original T-MOB WM5 ROM.
Regards
Andreas
ollli3d said:
hi all,
yes, until I found the coolest und most functional BT headset, the cheapy prior ones caused same faults, even to the point of a hard reset ... why, well
no help to be found, just the notion of thinking and knowing, that the cheapy hardware out there was casuing it, not the htc.
example, some devices go into a kind of sleep mode and disconnect if not used, then while the htc still thinks its connected, it gets no reply from your other BT device. Take many SW packages or HW devices on your PC even, unplug the network and u´ll see, even they have unforseen problems ...
have fun, try HW makers like HAMA or Samsung, they rarely disappoint.
ollli
Click to expand...
Click to collapse
hi
i dont know if you read the post's above, but if you do you will see that the pda is turning off the bt, so it dont matter if you use one of the 'fantastic products' of hama (yes i also read your other 2 'advertising' posts of your overall 3 for them ). or any cheap crap stuff from sony or motorola like i do.
anyhow to came back to the real problem, i called my provider today and after explaining the problem, they suprise me with a complete hasselfree swap of the device to a new one in the beginning of the next week. when i get the new device i will test it first with the rom that installed, and then switch to the htc rom again to see if the problem returns again, i post the results here.
bye mad
Yeah, I think they're probably aware there's something wrong with some bluetooth chips, both on the Athena and Universal....
hi,
with wm6,
i have tested a BT 1.1 headset (Conceptronics) and works fine, without problems.
also, i have tested 2 BT 1.2 headsets (LG Style-i and Supertooth Nano). In the 2 cases, i have your related problems.
in my opinion, wm6 has a problem with the headsets that implements the 1.2 protocol.
all the headsets works fine with wm5.
regards
I have same problem with HTC Advantage running WM6 with LG Style-i headset ...
With my LG Style-i it keeps disconecting but with my SE BT headset it works fine (PK 3.0 Dual ROM) so in my case the BT on the phone doesnot turmn itself off, just has problems connecting.
Someone sugested a diff radio ROM might fix it - if so, does anyone know which radio does not implement the 1.2 protocol?
I'm using 1.47.51.00
hi there
i'm using my replacement athena for nearly one week now, and had not a single 'shutdown' of bt, not with the se ds220 nor with the moto 705 headset. i use the official german tmobile wm6 roms and not the htc version i used on the replaced athena. so it is not totaly clear if the change of the device or of the rom is making the difference, all other software packages are installed again. it also seems that the system is more stable overall in my every day usage, but that might be only my personal feeling.
mad
*EDIT* one more thing i noticed now is that when a call came in the sound is now played in the bt headset. before the sound came out of the speakers of the athena, and the bt headset only play its standard ringtone. seems that now everything is the way it should be .
BigDede said:
I have same problem with HTC Advantage running WM6 with LG Style-i headset ...
Click to expand...
Click to collapse
hi,
i' sure that the bt problem is due to the radio rom. i have the 1.38 radio rom and no problems with lg style. please, install it and test and report the results.
regards
bartito said:
hi,
i' sure that the bt problem is due to the radio rom. i have the 1.38 radio rom and no problems with lg style. please, install it and test and report the results.
regards
Click to expand...
Click to collapse
I have the 1.38 Radio version and I have the problem which is Bluetooth turning off by itself when using LG Style-i
ok, the problem is wm6
BigDede said:
I have the 1.38 Radio version and I have the problem which is Bluetooth turning off by itself when using LG Style-i
Click to expand...
Click to collapse
Did somebody tried to go through these update from Microsoft for WM6 ??
http://www.microsoft.com/downloads/...76-ff8d-460c-b454-6c487fd4c7d9&DisplayLang=en
http://www.microsoft.com/downloads/...c1-f0f4-4fd6-9366-b61e0ab59565&DisplayLang=en
http://www.microsoft.com/downloads/...5f-782b-4378-a228-f18af8c59aa3&DisplayLang=en
hi spiderman ,
i don't have teste (i have wm5) but the description seems don't have relation with bt stack procedures.
regards
Hardware or software
It's 4 months since last post and wondering if someone found a solution?
My X1 has a very annoying problem with it's Bluetooth. During a call using Bluetooth handsfree the phone will drop the Bluetooth connection, leaving the call connected so annoyingly the caller can hear me cursing the unreliability of my phone. I then have to finish the conversation holding the phone to my ear without the headset.
I called Sony Ericsson, who told me to update the firmware. I did - to R2AA007 - makes no difference. They then said it was a defective phone, so I got a new one sent to me...
...this one has worked great for a month, but yesterday the battery ran almost flat and whilst on a call using handsfree it started playing up again. Now it does it all the time again, even though the phone has been fully recharged and rebooted.
I have been very careful not to change any settings with this second phone, no installs of anything. This is a Vodafone UK phone if it makes any difference. Any idea how I can get this working again? Even without the handsfree connected I can see the display flash 'Bluetooth on' at random intervals indicating that it keeps dropping. Sony Ericsson say that this is not a firmware issue that needs fixing now - what do you guys think?
there are many posts regarding your problem. one thing is for sure,you are not the only one. look here http://forum.xda-developers.com/showthread.php?t=480698 and here http://forum.xda-developers.com/showthread.php?t=471181 here too http://forum.xda-developers.com/showthread.php?t=448703 i have my mbw-150 and my hbh-pv712 connected at all times to my x1 the watch is always connected but my headset disconnects randomly as you mentioned even during a call. there is no problem with your phone it's a software issue.
Thanks for the links. What annoys me is that Sony tell me there is no problem and they won't report the bug to their firmware team because "it's been fixed in R2A". This isn't the case, and it doesn't give me much hope for firmware R3A.
Same problem here
I experienced the same problem. Got my X1 in december 2008. Problems started in mid Januari, about a month of good Bluetooth operations, it started to give problems. During a call the Bluetooth connnection is lost, but the call stays open. Can reconnect Bluetooth again during the call, but after some time (sometimes seconds, sometimes tens of seconds) the connection get lost again.
Was glad when the new firmware arrived in Feb 2009. Download it, and the problem was gone fore about one month. Mid march the problem started again. Downloaded (the same) firmeware version again and the problem was gone again for some time. Last week it reappeared again
My conclusion: the Bluetooth bug wasn't corrected in the latest firmware version. Just reinstallation of a new firmeware version resets the phone and the the problem is gone then for some time.....
Seems that there some kind of an internal timer/counter that corrupts good bluetooth operations. I don't want to reinstall "firmware" every time again because I have to reconfigure my phone then every time, which takes a lot of time.
I hope that Sony finally will correct this most irritation bug!!!!
In the mean time I use a Bluetooth restart programme that "turns on" bluetooth every second. This helps moth of the time.
This works for me
In the Bluetooth-Device-Manager tap and hold the stylus on the headset you want to use until a popup is shown, then select use as headset. This worked for me when i have had some problems with one of my headsets supporting more than the "Handsfree-Profile" .
=> better connection under R1, best connection under R2(using R2 since official release)
Good luck WOODY
Hey Guys,
I think i have the solution for the bluetooth problem. i had my Xperia since 11/2008.
i never had a problem with connection when i used my headset. the problem was with the I-Drive disconnection randomly.
I flashed multiple roms from Itje and Jack with the same problem always.
now for the past 2 weeks i have been using Itje V5.5 with no problems what so ever.
the key is to turn bluetooth off in the comm manager everytime you wanna install new programs. i truly believe that installing software with the bluetooth on disrupt something ???
Hope that helps.
mdshahed said:
the key is to turn bluetooth off in the comm manager everytime you wanna install new programs. i truly believe that installing software with the bluetooth on disrupt something ???
Click to expand...
Click to collapse
Honestly, it make no sense to me....
try it!! it will work ...
@mdshaded
I hope youre kidding, I've had BT problem (BT turns off) since I got this phone last year.
With Itje's WM6.5 RC1 I still have the same problem.
I am not Kidding, I tried all cooked and original roms. I had a pocket PC phone for the past 3 years: Trinity, Kaiser and now the Xperia.
Again my dropped BT Connection were with my Car BT system, never with my Stereo BT headset.
try to hard reset and then install Itje V5.5 and keep your BT off until you are done installing all your programs then turn it on and report back.
Cheers
mdshahed said:
I am not Kidding, I tried all cooked and original roms. I had a pocket PC phone for the past 3 years: Trinity, Kaiser and now the Xperia.
Again my dropped BT Connection were with my Car BT system, never with my Stereo BT headset.
try to hard reset and then install Itje V5.5 and keep your BT off until you are done installing all your programs then turn it on and report back.
Cheers
Click to expand...
Click to collapse
I had tried more phones (Eten M600, Asus P525, Kaiser, X1), and did a lot researchs and only HTC's one (Kaiser, X1, Diamond, TP, HD ...etc) gives such issue. Not on my Asus P525 and M600. And I had tried many A2DP devices (Sony: DS-205, DS225, DS970, DS980, Clip-D Radio, Jarba (forget what model), JVC-BT1 (car system)) and only HTC devices give me issue.
And your suggestion of turn off bluetooth while software installation make no sense as installation only perform files coping + registry registration which I don't see any relationship from BT issue.
Dear Jack,
I know it does'nt make any sense. but i had this problem on other devices and was always corrected with a cooked rom except with the Xperia..
there is nothing to lose.. just try it..
my phone had no single dropped connection for 2 weeks now.
All the Best.
what bluetooth issue, ive been using hbh ds-200 since ive got the xperia (used on buses, around the house and alot of places) works great and has a further distance than p1i but only has an issue of button compatability. i think it could be the the bluetooth device ur using or the lack of software. may be wrong completley but hear me out ive had it rnning for ages with music on or durig a phone call cause i cant be bothered to pull out of its case to avoid scratching the phone (i know its stupid) but like i said it is working, for me atleast
same problem ...
I'm experiencing the same problem:
my X1 periodically drops the connection to my BMW iDrive while I'm speaking. But, when I'm not in the car I'm using a plantronics voyager 855 and never had a problem ! So there seems to be a problem with specific bluetooth devices.
Before the X1 I had a touch diamond and it worked without any problems with the same iDrive.
Thomas
Dear Thomas,
i am glad that you mentioned your problem with the I-Drive. I did not have a single drop in BT Connection for 2 weeks now. I truly believe that installing some software impairs the BT connection with my I-Drive.
Again never had any problems with Headsets.
My I-Drive Version I believe was newer than V.25.
Cheers.