After the new Rom installed, I can't find the voice commander prog. Is it gone and must I reinstall it? I appreciate any help. If it's been deleted by mistake, how can i recover it?
Thanks for your help.
Should still be there. Mine is still there after the flash
Voice Commander
The Cyberon VoiceCommander (dreadful thing as far as I am concerned) is installed in the Ext ROM. If you cancel the installation of the Ext ROM before it completes you won't have it there. You aren't missing much. I have installed the Microsoft Voice Command 1.6, and apart from the fact that it won't read back commands over the BT earpiece (same problem as Hermes apparently), it is 1000% better than the Cyberon Program.
I am having the same problem.
It won't read back commands over the BT earpiece. This is really annoying...
Any solution yet ?
Related
I bought a Jasjar today and tried to load Voice command, it stops after it loads (installs) it doesn't freeze the Jasjar it just sits at the final step of install, I have to reset it and then to find that its there and you can turn it on or when you reset it says "Voice Command is ready" then a screen pops up and reads "Unable to start Voice Command. Reinstall and try again".
I noted that when I am installing it a window pops up and reads "You have chosen to install voice command to "". Installation to Main Memory is recommended. Continue anyway" I can only press YES as if I press no it cancels the install. What is "". it should be main memory.
I have tried searching to have no luck, I did find a mention of a problem but no solution.
Any help would be awesome. Thanks.
Seal, have you tried to use the latest ROM from the Clubimate site. Looks like your ROM may be corrupted (which can happen)
I have the lastest from what I can tell, I only got the phone today and went and registered, the rom I have is: 1.13.53 WWE Rom date 23/9/05
And thanks for the help
I fully reinstalled the rom and tried again with Voice command install and still the same problem, installs but doesn't work.
Any help please
It works for me, even with the error message you describe. But you cannot see contacts, and it does slow down the universal a good deal. I've removed it and got a snappy universal
it just seems really strange being a microsft product, I had an xda 11 before with WM2005 and VC worked fine, everyone else seems to have it though, why does theres work and not on mine.
@Seal, sorry mate I am confusing Voice Command and Voice Dial (I am new to WM5/PPC). I have not tried Voice Command (which I assume is to enable functions to be run on the JJ via voice control).
Tried everything and can't get it working, I also have a copy of the UK Version and it installs and works, why it works and the US version doesn't I don't know. BUT........in the UK version I can use all the functions except when you say "Call John on mobile" or anyone in your contacts and it opens the contact file and confirms the name before calling, the contact file is blank, the same happens when you just use VC to look up a contact, I say "Look up John" the contact screen pops up but it is blank but if you click on the notes tab the notes in the contact files are there, its just the main contact file that is blank.
Any help
Which version of VC are you using?
v1.504333.21 This is the UK Version
I check for update and it took me to the Microsoft Website and said that I had the lastest version
And if so, did you do anything in particular to make it work? Or install it the same way for any other Wizard?
Cheers
Its working great with out doing a thing....
:lol:
Hmm. Did you install it to memory card or main memory? Have you unlocked your phone or anything?
I've tried installing it before and after a hard reset and keep getting the same errors. Version 1.0 won't run, and my phone crashes when i try to uninstall it. And I am unable to install version 1.5.
Any ideas?
v1.5 Voice Commander
You can download v1.5 free from here. Install it onto you main device memory, and not storage card
http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,37/
You will need to create an account on buzzdev.net - should take 2 mins max
Version 1.0 won't install under WM2005 and you can't uninstall it off your device either. You will have to hard reset to get it off you device and then copy the cab file for 1.5 onto you device and run if from there. That the only way you will get it to work
If I install Voice Command 1.5 from Buzzdev on my XDA mini s, it works fine, but after a soft reset, the device won't boot past the splash screen! ny ideas?
EDIT: Here's me blaming Voice Command, and it was SPB Pocket Plus 3.0.1 causing the problems all along :/
Is there no way I can get rid of the previous version? Even manually deleting the files?
No? A hard reset seems a bit drastic...
Cheers
I just installed a rom that does not have voice command. How can I add it? I can't seem to find a cab anywhere.
Especially for you
http://rapidshare.com/files/3400810...e_WM2003_WM5_Windows_Mobile_PocketPC.CAB.html
Thank you.
Yesterday -- after getting my Wing just as I like it -- I installed the Pocket Mechanic trial. Curiosity got the better of me and I ran it's registry cleanup option. When it asked, "do you want to delete these entries?" like a fool and complete noob I clicked "yes."
Now my voice command doesn't function, with a popup that says "voice command has encountered a problem ...." I'm sure when I deleted the registry entries there were a bunch of "sapi" ones -- voice command. Oops.
Anything I can do to restore it??
You may have to reinstall it. What voice command was it? Microsoft Voice Command 1.6?
duprade said:
You may have to reinstall it. What voice command was it? Microsoft Voice Command 1.6?
Click to expand...
Click to collapse
Yes, its v1.6.17740, and I would reinstall it, I'm running Win Mobile 6 -- doesn't it have voice command in ROM?
Really late, but ....
Hey, after deep digging I found a .reg file that did the magic on my Wing! The problem is that the file has some syntax error and I don't know how to correct them, so I had to write every single key and value manually. And It started Working again!!!
Here's a link to the file
Cheers
This is one of the issue of bother me most for X1. Apply this fix (driver taken from HD), install Cyberon Voice commander/Voicedial (search yrself for whatever version you want), and the button on yr BT headset should bring up the app. (Work for my rom w/ Sony DS-205)
http://forum.xda-developers.com/showpost.php?p=3234724&postcount=2
Edit: Sorry bro. Just tried it today on stock R2A image and it's not working. But it's sure working under my rom and therefore probably more files which I already included is needed (mostly files from HD). I am too busy to look into this issue but those files should give you some hints what is needed.
does it works on the original ROM?
jackleung said:
This is one of the issue of bother me most for X1. Apply this fix (driver taken from HD), install Cyberon Voice commander/Voicedial (search yrself for whatever version you want), and the button on yr BT headset should bring up the app. (Work for my rom w/ Sony DS-205)
http://forum.xda-developers.com/showpost.php?p=3234724&postcount=2
Click to expand...
Click to collapse
Jack, I tried to install the fix but when the bar fills up it says that the installation was unsuccessful. I am using your rom v2.4 btw.
I am trying to solve this bluetooth problem for days, I hope this fix will do it for me (if I get it to install).
Have any solution????
XavierGr said:
Jack, I tried to install the fix but when the bar fills up it says that the installation was unsuccessful. I am using your rom v2.4 btw.
I am trying to solve this bluetooth problem for days, I hope this fix will do it for me (if I get it to install).
Click to expand...
Click to collapse
I update the post w/ manual install method which should work at least for 2.4. (just tested and not working for stock R2A rom).
jackleung said:
I update the post w/ manual install method which should work at least for 2.4. (just tested and not working for stock R2A rom).
Click to expand...
Click to collapse
So does it work in your rom or not? (I am using your 2.4). Yesterday I just extracted all the files from the cab and put them on the installation folder of the cab. Then extracted the registry keys I found on the cab and imported them on my X1. Still it doesn't work.
I think that the reason it won't work is that you don't replace the BTAGExtModule key (that in your rom is vcbthag.dll) with another dll. So vcbthag still calls MSVC and Cyberon is never called.
XavierGr said:
So does it work in your rom or not? (I am using your 2.4). Yesterday I just extracted all the files from the cab and put them on the installation folder of the cab. Then extracted the registry keys I found on the cab and imported them on my X1. Still it doesn't work.
I think that the reason it won't work is that you don't replace the BTAGExtModule key (that in your rom is vcbthag.dll) with another dll. So vcbthag still calls MSVC and Cyberon is never called.
Click to expand...
Click to collapse
Oh yes. Please change it back to OEMAGW.dll and let me know yr result.
jackleung said:
Oh yes. Please change it back to OEMAGW.dll and let me know yr result.
Click to expand...
Click to collapse
Unfortunately with that dll it just continues to do what it did before MSVC, "nothing". I wonder how they do it on Touch HD.
I will release 2.5 soon and you can play around w/ it later. At least I am able to call Cyberon VC w/ BT button now.
jackleung said:
I will release 2.5 soon and you can play around w/ it later. At least I am able to call Cyberon VC w/ BT button now.
Click to expand...
Click to collapse
Good news, waiting for your new release.
Jack, I don't see the BT fix on your linked page. How did you finally solve this problem? Is it the method listed in this thread, or something else? I would like to get Cyberon working on my X1a without completely changing the ROM.
UP.... UP..... ?