Hi there,
I just bought a Bluetooth Nokia HS-3W headset to use with my imate himalaya!
I succeded in pairing and using it but people talking to me say that there is a lot of noise and expecially a lot of echo, so that they cannot almost understand a word!
I obviously tryed the headset with another phone (a nokia 6310) and it worked like a charm.... then I tryed to use it with another qtek 2020 (yes qtek branded, from Vodafone Italy) and again it worked perfectly!!!
Both my imate and the qtek I used for the test has Rom 1.72, so I would expect they hase the same bluetooth stack! Am I wrong?
I'm not using any kind ot bttools...
Is there any chance to have it working properly, or shall I buy a different BT headset?
Thx in advance
i had the same problem, you have 2 options
1. slide out the rubber part from the plastic part on the speaker side
2. or what i did is i cut off the rubber part you press on the earphone directly, so in other words you click on the button directly & this will allow your the speaker voice not to bounce off the rubber side when his voice leaks
I have a couple questions about my KJam
1) Does anyone know where (even in the registry) to adjust the mic sensativity? I am not talking about AGC. I use a voip program and the mic is too sensative and cause echos for the other party.
2) Anyone know how to use a bluetooth headset to work independant of teh phone and voice dialing? I would like to use it with my voip software but when it connects it only activates the voice command program then disconnectes if not used for that. I would like a way to just transfer the ear speaker and mic to the headset until switched off. My heaset is paired with the KJam in handsfree mode.
3) Anyone know where I can get the part to replace my keypad? I have the arabic/english keys and would like only the english version. I already changed the software and not just want the keypad membrane itself that I could change.
4) Anyone know where to find a disasembly guide/manual for the KJam?
Thanks, John
PS: the voip program works great!
www.skynetworks.gotdns.com
What VOIP are you using?
I am using the SJLabs softphone with Vonage. Bye the way, it works great if I use an external earpiece headset like the one that came with the KJam. The built in mic is just too sensative and picks up the sounds from the built in earpiece. Although it doesnt do this when using the phone in normal calls.
The fact that the mic isn't too sensitive when using the normal phone indicates that it's more of a problem with the softfone sotware. Perhaps it's setting the mic gain too high.
Have you tried another softfone? Other than that, if you try a different headset and mic but then you may find the mic not sensitive enough for normal phone use.
I would try another softfone first.
Yep, I have tried different softphones. Still the same. It seems that the mic volume is different when using the normal phone function than it is when using programs. The softphone doesn't have a mic sensativity adjustment and states to adjust the mic in the control panel of windows ce. But 2005 doesnt have an adjustment. It just has the auto gain control on and off mode.
Well I went ahead and purchased the softphone from www.xten.com and it works great. I also have ineen installed and working.
Anyone have any suggestions on my other questions?
I have 6940. There is small button inside headset socket which senses if it is connected to a headset. It is easy to get it permanently locked which means phone will work only with headset or Bluetooth. Under warranty HP will fix it but take extra care using headsets as it is easy to pull the wire hard.
Applies to 6515 as well.
nuzbabu said:
I have 6940. There is small button inside headset socket which senses if it is connected to a headset. It is easy to get it permanently locked which means phone will work only with headset or Bluetooth. Under warranty HP will fix it but take extra care using headsets as it is easy to pull the wire hard.
Applies to 6515 as well.
Click to expand...
Click to collapse
There was a similar problem with the htc magician (i-mate JAM). So again they used a crappy headset plug !
could you explain more about it i dont understand as well
up
i have a problem... when i talk on my hw9615 if i touch the microphone with my skin or the earphone with my ear it will sound very bad like microphony very loud..so this makes my phone unuseble....does anyone know why this happens ? is the headset ?
????
????????? ???
Hi all,
I have Qtek s100 since exactly 2 years. I am very happy and even after relasing so many HTC PDA phones after that, I really did not think of changing my phone. Now I see P3600 as probable candidate to replace my S100. But in addition to size and processor, I would also be looking at some key features as justification to change. I am not going to use 3G or 2MP camera. so, lets narrow down to Free/very cheap phone function on this phone.
- anybody tried to install Skype client to make audio calls on wifi connection?
- Also anybody checked function of SIP voip client like SJPhone again using wifi?
If these features are going to have problem with.. I would still stay back with S100 happily.
AS
Skype works fine on it and I run VoIPSurfer for SIP without any problems!
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
This is only available on the Eten X500. I finally decided to get this instead of the Trinity coz I dun use the 3G and the GPS is a lot better on the X500.
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
It is a limitation in Skype. Try using a headset. Not BT though, since the processor can't handle both Skype and BT headset at the same time..
With my LOOX 720, we also have a "large" speaker (badly positioned even if you wanted to ignore that it is a loudspeaker and put it in your ear) and a small "phone" speaker (placed correctly where you would put your ear), although FSC never released any VoIP app for the device (and LOOX is not a phone).
Skype (and other VoIP apps) worked as you say. Audio was coming out of the main speaker, plus they (Skype) ignored our requests to use the correct speaker (or didn't know what to do about it).
Then some guys noticed that the small speaker was ALWAYS outputing audio (in apps/games etc.), but since it is a small phone speaker, you have to put your ear on to hear it. Also this gives more "depth" in 720 audio (since the tiny speaker does its part). Anyway, that was an interesting discovery because it led to research that gave something more important:
A simple registry entry could shut-off the main speaker while keeping the phone speaker working! No need for soft reset or anything! Some even made a little program for this (which also keeps different volume levels for when on and off since eg. I want volume=2 when loudspeaker is on and volume=4 when only ear speaker is on). Toggle it whenever we want (I have a shortcut in my today screen for it).
So I am thinking... look for something like that in Trinity also? It should even be simpler because I am sure Trinity has pretty clear and distinct volume values for both speakers (since this IS a phone after all).
Maybe a shortcut to a registry key could allow to control the speaker volume... like in the loox. I'll try to search registry... Anyway, this is a known issue for skype, so probably they will be working on that on future releases, maybe it needs customization for every particular model. _http://forum.skype.com/index.php?showtopic=71698
Skype and Bluetooth
I use a stereo BT headset and it works great (iTech clip S38). I used another program to toggle, but battery life went to a couple of hours, even when not in use. If you Skype a lot, or even once on an international trip, the cost is well justified.
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
It is possible now with the last final (not beta) version of Skype (2.2.20 or something like that).
The problem is, this final version doesn't work for all phones. You can see the list of supported devices on Skype download page.
The Trinity is not supported on this final version. You can only use chat function, and when you place a voice call, the application automatically shut down.
That's why we keep running the previous beta versions, which work fine, but the sound come from the back speaker
I tried this final version on my wizard, and I confirm that the sound does come from the ear-piece, for the first time in skype history. But strangely enough, this 'new' skype is only compatible with 'old' phones...
The text found below was sent to Skype by me today
Dear Skype,
#1 please sent me a list of supported Pocket PC’s that work with skype and with a Bluetooth A2dp Headset.
The one I have now can be found at: http://www.jabra.com/Sites/Jabra/NA-US/products/Pages/JabraBT8040.aspx and I works really well for windows media mobile.
#2 I currently have the following device which does not work with Skype for the Pocket PC with an A2dp headset. I am very upset about this; I really want to use your skype out service, but cant.
My Device Information: Unlocked
HTC P3600, Trinity
ROM version: 1.23.405.2
ROM date: 03/11/07
Radio Version 1.38.00.11
Protocol Version: 32.71.7020.12h
ExtROM Version: 1.23.405.103
I have installed the following versions of Skype for PPC
SkypeForPocketPC-2.0.0.51-LowCPU.cab
SkypeForPocketPC-2.0.0.51-LowCPU.cab
SkypeForPocketPC-2.2.0.18-Beta.cab
kypeForPocketPC-2.2.0.20-Beta.exe
SkypeForPocketPCNew.CAB
The only one that works is the SkypeForPocketPC-2.2.0.18-Beta.cab it works perfectly for the HTC P3600, Trinity however, "only" when you use the corded headset that attaches to the mini usb on the phone, or just the speaker that is on the back of the phone the “external speaker”.
the SkypeForPocketPC-2.2.0.18-Beta.cab, I feel, does not work with any A2DP Bluetooth headset.
I have tried the following A2DP Bluetooth headsets
JabraBt8040
Link: same as above
Plantronics Voyager 855 Stereo Bluetooth Headset
Lubix UBHS-NC1 Stereo Bluetooth Headset
I think something goes wrong when the Bluetooth stack tries transfer the Skype audio to the Bluetooth headsets it gets all messed up with lots of echoes and sound disconnects and, latency and so on. However playing any multimedia files on the phone work perfectly through my A2DP Bluetooth headset.
Like a said SkypeForPocketPC-2.2.0.18-Beta.cab works perfectly only when you use the corded headset that attaches to the mini usb on the phone, or just the speaker that is on the back of the phone the “external speaker”.
I have also tried to use a whole bunch of 3rd party applications that redirected the sound to my older mono headsets. I tried three of them, and that did not work either. It’s something when the speaker sound gets transferd to any BT device.
(((((( Update I just used the the btaudio.zip that qyach posted: http://forum.xda-developers.com/showthread.php?t=289720
it works but the mono sound is still not very good, nothing like a mobile phone call sound, and no ware near the sound quality with the corded headset that came with the HTC P3600 What to do,, anyone?
Im thinking of getting a ETEN X800 http://www.smart-mobile-gadgets.com/welcome/cart.php?target=product&product_id=1128&category_id=40
I read that It works well with Skype, and the sound is sent to the phones earpiece after installing a piece of software that ETEN developed called Skype Switch, therefore it should work with a BT headset.
http://64.233.169.104/search?q=cache:cwIdCCuH2LEJ:www.etenblog.com/2007/11/13/getting-skype-to-work-as-it-should/+skype+Switch+program&hl=en&ct=clnk&cd=2&gl=us
But now some sales man who sounded like he know what he was talking about, said that the ETEN phones are flaky and that 70% of the ETEN phones that he sells get returned.
I don’t know what to do, but, dam it I want a WM5 or WM6 Phone that works perfect with Skype sound BT and all.
Now the only problem is how much better or worse is HTC V.S. ETEN? I really am looking for a cool looking phone something small and sleek that will work perfect with Skype mobile. The ETEN X800 looked like it was the solution. But now I don’t know what to do.
Someone please help.
Update: 02/16/08
I Just got an ETEN x800 and istalled the Skype Switch and took skype for a test run ,, ya,ya, the sound gets redirected to the earpiece,,, ya, but it sonds like sh_t also..
Someone out there has to be able to Hack this mess.
DTMF ,Fring, PPC Skype, And A2DP.
For the Skype sound problem not going through the BT headset someone on this site suggested using fring which is a fantastic idea, however it’s always something... with fring you can place a Skype out call but during the call you can’t navigate company’s phone menu during the call like, “press 1 for billing” “press 2 for sales”. There isn’t even a dial pad. When I contacted there support department I got this:
Hello,
Thank you for contacting our support team.
Currently, it is not available to dial DTMF sounds on fring, this should be implemented in future versions. You can stay up to date on new releases from our blog http://www.fring.com/blog/
In other words, I’m not holding my breath.
Is there a way to transmit a DTMF signal to the input of a Bluetooth A2DP headset? I don’t mean literally, just a sound redirect, in other words trick it into thinking it’s me making the DTMF sound.
I can’t find anything on the net except for Dial-a-matic, which will not work. I also took a look at Pocket Dialer v1.03 but there is no way to redirect sound. I also thought that maybe Kai’s ContactDialer would work but I don’t think it does, or I don’t understand how to use it and get it to work.
I also wonder if all of these problems are salved on WM6 I was looking at upgrading to the new HTC P3470 but the processor is slower than the p3600.
God,, do I want to get rid of that stupid weird mini HTC usb headset, ridicules for a $700 phone.
I wouldn’t need to go through all this if Skype would just finally fix their PPC version to work with a Bluetooth headset.
(((((( Update I just used the the btaudio.zip that qyach posted: http://forum.xda-developers.com/showthread.php?t=289720
it works but the mono sound is still not very good, nothing like a mobile phone call sound, and no ware near the sound quality with the corded headset that came with the HTC P3600 What to do,, anyone?
Im thinking of getting a ETEN X800 http://www.smart-mobile-gadgets.com/...category_id=40
I read that IT works well with Skype, and the sound is sent to the phones speakers after installing a piece of software that ETEN developed called Skype Switch, therefore it should work with a BT headset.
http://64.233.169.104/search?q=cache...lnk&cd=2&gl=us
But now some sales man who sounded like he know what he was talking about, said that the ETEN phones are flaky and that 70% of the ETEN phones that he sells get returned.
I don’t know what to do, but, dam it I want a WM5 or WM6 Phone that works perfect with Skype sound BT and all.
Now the only problem is how much better or worse is HTC V.S. ETEN? I really am looking for a cool looking phone something small and sleek that will work perfect with Skype mobile. The ETEN X800 looked like it was the solution. But now I don’t know what to do.
Someone please help.
ive searched for ck-7w in the hermes section but finds nothing? surely others must use this handsfree kit?
Well my issues, my hermes wont find it when searching for bluetooth devises? Never had any issues with my wizzard?
ive tryed a few different wm6 roms, now on the black.
Is there a cab somewhere to fix this, as i cant, use this phone until i get it sorted with my car kit
Hi fil,
I can't speak to WM6 but my 7W works well (usually) with my 8525 WM5 ATT Upgrade Rom. I remapped the ptt button to activate the built-in voice dialing. Sometimes the system announces the name throught the 7w speaker, other time via the 8525 speaker. Who knows why?
The quality of the recognition software is fair. I am planning on re-recording some of the voice tags in the car via the 7w mic. I have a feeling this will result in greater accuracy. It has to do the the acoustics where the tags are recorded.
My BT settings in the 8525 are
Mode = Turn on BT and Make device visable
Devices = add new device, if it finds it, click on Nokia CK-7w & check off Hands Free, at the bottom of the screen hit Save
BTW, the 7w data cable 5 volt lead does not have enough balls to charge the 8525.
Let me know if you get WM6 working with the 7w.
Lyle
You've already tried to reset the CK-7W ?
Especially when your Nokia Carkit has an other mobile paired in his memory (an old one for example) it won't pair the Tytn.
Worked for me (reset CK-7W).
After that my carkit works fine with yhe Tytn but has proplems if I wan't to pair a second (Symbian) phone.
alylea, my tytn wont even find it, when searching, have ticked the make seeable to othe devices, the method you discribe works perfectly as said on my wizard
davw, reset the ck-7w how?
tho the ck-7w can do up to 7 phones in its memory i belive, had no issues with a wizard and 2 different nokia all paired on it allready?
davw said:
You've already tried to reset the CK-7W ?
Especially when your Nokia Carkit has an other mobile paired in his memory (an old one for example) it won't pair the Tytn.
Worked for me (reset CK-7W).
After that my carkit works fine with yhe Tytn but has proplems if I wan't to pair a second (Symbian) phone.
Click to expand...
Click to collapse
again how'd you reset it? dont have the manual
still aint working, see unable to see the kit!???
anyone?
right its working now?, done nothing different?
was sitting in my car thismorning doing a bluetooth search for my new stereo headset i picked up from the PO on my way to work, it found it and the carkit , and paired with both!
well problem solved, but **** knows how ???
No idea what did the trick but here is the Nokia Europe site for the manual.
http://www.nokia.co.uk/A4222096
So iGuidance voice instructions do not come out of the CK-7W speaker not do the voice dialing confirmation names, although basic HF function works. I'm testing an inexpensive application that routes all audio from the 8525 to the BT output. I'll let you know if it works.