I mean to say when I connect headphone to my phone..everthing seems good and easy sound and music comes fro m headphone..but as I get incoming call..sound comes from phone speaker as well as from headphone at a time and when call disconnects after that wen I play music..sound comes from headphone as well as phone speaker!person who has wear headphone can also listen music n person who didn't wear headphone can also listen music ! same way wen call comes person who wears headphone can listen voice of person who is on other hand as well as person who didn't wear headphone can also listen voice of person who is on other hand through speaker!! voice is coming from both ways at a time! I hope everyone would understood what I mean to say! its problem with 3.3 rom not with others!
This problem is just occuring in aku 3.3 rom...beside this rom is very good i like everything but this sound problem is very irritating....
pls help me ...will b very thankful to members and moderator (faria)
Might be a hardware problem but have you tried to reflash with crossbow or flash with a different rom to see if its the rom
(it will stop the problem if its crossbow) or if it continues with the other rom that means its your headphone jack.
I would flash it to the original rom it had if its possible or another rom that you have tried
I dont know if feria will tell you something about you making a new account
but at least you could of used a way different name.
its problem with 3.3 rom....others rom work perfectly!!sound problem comes when I install 3.3 rom! with other rom its not problem!! headphone is abs fine n its nt hardware probs!
If you are using the AKU 3.3 ROM, you are not using Crossbow, that ROM simply had Crossbow icons, and sounds.
You are only using WM5
Do you mean that the sound (music and ringer) come out of the speakers while the phone is ringing or does the music continue to play through the speakers after the phone stops ringing? If it's the second one then I don't know what's wrong however, the first is normal but there's a registry hack to change it. I recommend searching for it I'll look too but it's been a while it'll be hard to find...
EDIT: It wasn't as hard to find as I thought. Here's the link http://forum.xda-developers.com/showthread.php?t=261351
ok understood
I mean to say when I connect headphone to my phone..everthing seems good and easy sound and music comes fro m headphone..but as I get incoming call..sound comes from phone speaker as well as from headphone at a time and when call disconnects after that wen I play music..sound comes from headphone as well as phone speaker!person who has wear headphone can also listen music n person who didn't wear headphone can also listen music ! same way wen call comes person who wears headphone can listen voice of person who is on other hand as well as person who didn't wear headphone can also listen voice of person who is on other hand through speaker!! voice is coming from both ways at a time! I hope everyone would understood what I mean to say! its problem with 3.3 rom not with others!
I understand what you mean but I'm using the same ROM and I just tried to replicate the problem and can't. By the way the AKU 3.3 ROM isn't WM6 it just uses some enhancements from WM6. It's still a WM5 ROM. Anyway this problem seems to be a bit beyond me I hope someone is able to help you.
Cardcaptor_RLH85 said:
I understand what you mean but I'm using the same ROM and I just tried to replicate the problem and can't. By the way the AKU 3.3 ROM isn't WM6 it just uses some enhancements from WM6. It's still a WM5 ROM. Anyway this problem seems to be a bit beyond me I hope someone is able to help you.
Click to expand...
Click to collapse
atleast thanks for your suggestion nd helping me from ur side but its my bad luck tat didn't solved my problem!! from where did u download aku 3.3 rom!!
I got the AKU 3.3 ROM from the xda-dev FTP link in the linked thread. Did you get it from somewhere else?
Cardcaptor_RLH85 said:
I got the AKU 3.3 ROM from the xda-dev FTP link in the linked thread. Did you get it from somewhere else?
Click to expand...
Click to collapse
yea me too recived file from this thread!!
The fix is nice, but I won't install it. Actually I really like the current setup. No sound for clicking menu, but beep when alert windows pop up. In WM5, you have to get both or none, I am looking for this scheme for a long time.
MMS on WM6 Crossbow
I have:
- ArcSoft Composer 3.0.16.6 - OK
- operator settings - OK
BUT when I tap on "Send/Recieve" Wizard write "Error Synchronizing".
Somebody help me!!!
I had the same thing happen till I set the tweak in registrywizard: always on TmobileMMS (which is the server I set up under MMS configurations>Servers) Now I send and recieve all day long.
Where is this tweak in Registry Wizard? I do not see any MMS Tweaks?
hey how did u do that i dont see in reg wizard. im have arcsoft 3.0.7.19.cab
should be using the one u have
last tweak on the 3rd tab. its labeled: always on. then has a drop down menu.
Last tweak on third tab says "Gprs Always on" Not "mms Always on"
BoostL33k said:
I had the same thing happen till I set the tweak in registrywizard: always on TmobileMMS (which is the server I set up under MMS configurations>Servers) Now I send and recieve all day long.
Click to expand...
Click to collapse
WHAT WHERE I MUST DO??? (step by step please)
Yes that is the right one! That is the one i check and my MMS worked. that drop down menu should have the MMS sever as one of the choices. if so select it.
Related
After upgraded to WM2003SE, My XDA2's bluetooth doesn't connecting well with my Motorola HS810, it only works for outgoing calls but unable to receive phone calls. Wonder what problems could it be. :?:
hmm...
I don't know that what version of wm2003se you have done, but I used to have the same problem with you coz my headset is HS810 the same.
Anyway, this attached file helps and you should give it a try, it gives a bit different performance from normal headset function but quite well.
Or... another suggestion.... try a translated rom version 2.20.07 this one works very fine with HS810 and you can also use HS810 with handfrees profile.
Good luck!
Re: hmm...
Vedas said:
I don't know that what version of wm2003se you have done, but I used to have the same problem with you coz my headset is HS810 the same.
Anyway, this attached file helps and you should give it a try, it gives a bit different performance from normal headset function but quite well.
Or... another suggestion.... try a translated rom version 2.20.07 this one works very fine with HS810 and you can also use HS810 with handfrees profile.
Good luck!
Click to expand...
Click to collapse
Thanks Vedas:
After downloaded this attached file to my Xda2, my bluetooth is back to normal again and with more features thn b4, very usefull thanks dude.
cool!
A bit mor additional information that you should be aware....
Warning:
While using this Pocket Bluetooth Tool you can pick up call waiting and you still can swap between 2 calls but whenever one of them ends you will lose signal between your headset and ppc, the remain call will still in progress but you cannot talk at all then must end up with hang up the call.
Solution:
Just disable Call Waiting in Phone>Tools>Option>Services>Call Waiting.
This is the downside of this program with HS810 that I has encountered.
If you still want to use Call Waiting, I suggest 2.20.07 and you may love it.
Good luck!
Re: cool!
Vedas said:
A bit mor additional information that you should be aware....
Warning:
While using this Pocket Bluetooth Tool you can pick up call waiting and you still can swap between 2 calls but whenever one of them ends you will lose signal between your headset and ppc, the remain call will still in progress but you cannot talk at all then must end up with hang up the call.
Solution:
Just disable Call Waiting in Phone>Tools>Option>Services>Call Waiting.
This is the downside of this program with HS810 that I has encountered.
If you still want to use Call Waiting, I suggest 2.20.07 and you may love it.
Good luck!
Click to expand...
Click to collapse
Thanks again Vedas
I still haven't try the call waiting feature yet. But for any interuption like you said, i think i'll have a try the 2.20.07 as you written above. But how and where do i get this upgrade?
Same thing happen to me .. where to get the patch ?
Now my BT is chuck in my drawer . Funny thing is that HS850 got not problem ..sighhh ..
thanks
Can anybody fix the resume-music-problem?
I'm using a XDA neo (s200) and a Logitech HS200 bluetooth headset.
It's always the same problem: When I am listening to music and a phone call comes in, everything is fine. But when the call ends it's getting worse. Either the music resumes playing on my neo, or just nothing happens.
I recognised that a lot of A2DP-user have the same problem!!
So I hope it's just a dll/reg-problem which can be solved.
I already started to find some workarounds. But nothing helps.
After the call, I can press nearly every button on the headset, but nothing helps. When I manually enter the WM-Player and push the play-button again, the music seems to resume, but there is no sound, or the music comes out of my pda. It's strange: I can use the control-buttons on my headphone, but there is no music at all.
When I want the music back on my headphone, the only way is soft-resetting my neo. This is very annoying and takes a lot of time.
This my configuration:
XDA neo (s200) /O2-Verison, but it's nearly "O2-cab-free"
Logitech HS200
Windows Media Player 10
Mort-Player
I've installed A2DP in two different ways:
- automatic (via A2DP_hack.cab) and also
- the manual way
==> No difference
Everything else is working fine. No sound quality/hissing-problem. As long as nobody calls me, all buttons are woking fine.
I would be very glad, if some of you guys could fix this problem! I mean, it's awesome, that you could bulit up this a2dp-stuff! But at the moment, this a2dp-solution is just the half way. We need a way-back to resume our music!!
So PLEASE ROCK ON!
help!
I'm getting crazy because of this resume-problem.
For your interest:
I told you, that after a call, the music resumes on my pda, or it just stop.
Now I found out something: After a call the music just starts when I'm still in the WM-Player.
When I leaved the player before a call comes in (music is still running) the music won't resume on my pda. Just nothing will happen, until I work on the pda.
Hope this could be useful for you.
I don't think, that my headphone is the problem. When there is no call, I can always switch the music from pda to headphone and the other way by pressing the backward- and forward-button button on my headphone at the same time.
When I do this button-trick after a call I can still switch music from headphone (without sound) to pda. When I want the music back from pda to headphone it seems to work, cause I can use every button to control WM-Player, but there is no music.
What can I do???
Please help me.... I'm so sad.
I have the same problem!
Now I have to use my A2DP stereo headset like a simple wireless stereo hadphones 8(
My hardware:
Qtek S200
WM5, ExtROM 2.9.7 with "Smartmobile.se Enable A2DP" path
Sony Ericsson HBH-DS970 stereo headset
yeehaaaa
it finally works! i love you guys!
How did u fix it?
the way it works!
sealtael said:
How did u fix it?
Click to expand...
Click to collapse
simple & easy: just search your wireless lan cable and connect it to your xda. after that you have to take a bucket full of energy (I think half full would be enough) and jump around your xda while it's fighting with your activesync!
no, just kidding.
just have a look into this thread:
http://forum.xda-developers.com/showthread.php?t=284344&page=3
there you will find a download. (page 3)
please keep in mind, that this seems to be quite experimental! it's working with AKU 3.3 A2DP! The author of it recommends to delete the old a2dp-stuff before installing the new cabs.
Due to the fact that I made a complete new installation of my Xda NEO, I could directly install the AKU 3.3 cabs.
And what can I say? Everything works just fine! No more stupid reset after call!
Have fun!
poiuz said:
.....
....
just have a look into this thread:
http://forum.xda-developers.com/showthread.php?t=284344&page=3
there you will find a download. (page 3)
please keep in mind, that this seems to be quite experimental! it's working with AKU 3.3 A2DP! The author of it recommends to delete the old a2dp-stuff before installing the new cabs.
Due to the fact that I made a complete new installation of my Xda NEO, I could directly install the AKU 3.3 cabs.
And what can I say? Everything works just fine! No more stupid reset after call!
Have fun!
Click to expand...
Click to collapse
Thanks for ponting out the correct direction. I got that file and installed on my G4 XDA Neo (QTEK AKU2.2 original ROM). It worked perfectly. Always automatically swtich between stereo and hand free mode.
Hi All
I just installed MS Voice Command 1.6 (US) and so far its been working almost perfect. I say almost perfect because somehow when a call comes in, it announces the name of the caller through the phone speakers even though I specifically tell it to announce only through BT handsfree set. I thought that maybe my headset did not support it but the weird thing is that it would automatically read incoming messages through the BT headset. Is there any tweak that I need to do so that I can hear who is calling through the BT headset?
I am currently using an AKU2.X ROM (Dopod's latest) with a Plantronics 640E BT headset. Any help rendered is much appreciated.
I can at least tell you that a Crossbow ROM won't help...
I still get this irritating issue
Sounds like a MS Bluetooth Stack issue
Funnily this is the symptoms described on Microsoft page :
http://www.microsoft.com/windowsmobile/voicecommand/default.mspx
But for HTC Hermes & Palm Treos
Thanks to a forum member I found my mistake !!
Check this post : http://forum.xda-developers.com/showpost.php?p=1112405&postcount=369
sebbes said:
Funnily this is the symptoms described on Microsoft page :
http://www.microsoft.com/windowsmobile/voicecommand/default.mspx
But for HTC Hermes & Palm Treos
Click to expand...
Click to collapse
I guess my problem is listed as "Older WM5 Devices" where the notifications for calls would be routed to the speakers. No fix there I guess.
With the PDAviet ROM it works ok !
Routed to the headset, and even the incoming calls get notified in the same manner
sebbes said:
With the PDAviet ROM it works ok !
Routed to the headset, and even the incoming calls get notified in the same manner
Click to expand...
Click to collapse
Could you tell me more about this PDAviet that you are talking about?
it's a crossbow ROM (beta of course)
Thanks for the headsup. Unfortunately I need the functions of a proper phone and thus unable to use the ROM. Thanks for the heads up.
I see, in fact this unofficial ROM is pretty ok (just a few times when you'll have to reset before it boot up successfully)
Else the phone part is really nice, with a great smartdial (like you have on smartphones, qtek8310 etc) but you're right, it's for people that are not scared by few minor problems
I used to use MSVC 1.6 on the Tytn2 on WM6.5 (see sig) and the confirmation notifications when you called someone always used the bluetooth headset. Since running it on the Leo MSVC seems to use the loudspeaker on the handset instead of the bluetooth headset even though every setting is marked as "Announce notifications using Bluetooth hands free only"
Anyone else having this issue as I did a search and couldn't find anyone.
Edit: Just had it working once but then the other end couldn't hear me when the call connected. Then I tried again and it had reverted back to not working.
I went to Bluetooth settings, Advanced, Audio and ticked the box then rebooted the phone...
I have this same problem! Its annoying... you want to make a call and the prompts/confirmation come from the phone... Please, can someone figure this out?
Bumping thread as it should be resolvable
Starfury said:
Bumping thread as it should be resolvable
Click to expand...
Click to collapse
IT isn't... I have done more research..
The Leo (and the TouchPro2) use a Widcomm BT stack as opposed to the usual MS stack. Sadly, this means the BT won't play nice with a lot of different apps/equipment. This isn't something that can be swapped out easily as NRG has pointed out. Touch Pro 2 users are still facing the same problems even though that phone was released much earlier. Some however have reported some success when using certain custom ROMS... how its working with some ROMS and not others is still a mystery it seems
I would watch the ROM Development thread carefully to see if a ROM what works with our MSVC shows up....
Hello,
Is there a workaround... ?
Thanks in advance for any info,
Jean-Jacques
I have the same problem. I'm using an old phone when I need to use hands-free. After spending a lot of money on my HD2, I'm not impressed.
I there a particular combination of headset and software that does work, especially for voice dialing?
have you tried this?
I would, but I don't know if I even have voice command on my phone.
http://forum.xda-developers.com/showthread.php?t=634494
DrATty said:
I there a particular combination of headset and software that does work, especially for voice dialing?
Click to expand...
Click to collapse
Does not work with my helmet bike with scala-rider Q2, but does with does with Philips SH9000 stereo headset...
Mono/Stereo seems to matter.
Any workaround would be veryyyy appreciated
Jean-Jacques
Workaround
Hi,
for this following workaround seems the only way to get it runnin:
My BT-Headset has the ability to be set as a Stereo-Device. When I establish a connection to this Stereo-Device, I can use it (my BT Headset) to give Commands and recieve "answers" from the VC. In case I want to start a phone-Call, my headset changes the connection automatically from "Stereo-Device" to "Handsfree-Device" and back, after finishing the Call.
This may be the Reason, why someone here already got it running with a BT-Stereo-Headset.?
Sorry for my bad english...
Ok so, recently my blutooth quit workin when I recieve a call. Well, the speaker on the phone works instead of the one on the blutooth. The mic on the blutooth still works though. When I make a call, both the mic and speaker on the blutooth work fine. I tried loadin a different radio version but that didnt work. So I was playin around with it and found that when I recieve a call, if I go to the menu and turn hands free off at the top, then the speaker on the blutooth works. Ive had this blutooth a while and it worked fine before, but Im thinkin I might have changed somethin in the phone without knowing it. Is there anyway I can get the blutooth to work without having to manually turn hands free off? Thanks.
have a read through the "stuck in car kit mode" threads, you could be suffering from that.(that thread is in the regular leo section i think)
samsamuel said:
have a read through the "stuck in car kit mode" threads, you could be suffering from that.(that thread is in the regular leo section i think)
Click to expand...
Click to collapse
Ill go take a look now. Thanks!
Ok, my problem is a little different. I dont have the Navipanel pop up, and my display doesnt stick in landscape mode. Also, I should have been more clear in the first post. When the blutooth is connected the sound still comes from the headset speaker, not the speaker phone speaker, or the blutooth speaker.
As soon as I turn hands free off in the in call menu, the problem is solved. How can I make that my default?
ahh gotcha, no clue then, sorry.
Well, thanks anyways lol.
I flashed a few different ROMs on this phone before I decided I liked the stock one best. So , I loaded Ver. 2.13.531.1 and after some digging it seems that this ROM doesnt play well any blutooth devices. Im gunna try another stock ROM and see if I can get it to work.
new-b said:
Well, thanks anyways lol.
I flashed a few different ROMs on this phone before I decided I liked the stock one best. So , I loaded Ver. 2.13.531.1 and after some digging it seems that this ROM doesnt play well any blutooth devices. Im gunna try another stock ROM and see if I can get it to work.
Click to expand...
Click to collapse
I use the originial 2.10 stock ROM still, and I have no problems using either my regular BT headset (old plantronics 620), or my newer stereo BT headset (plantronics backbeat 903)
Im hopin thats all the problem is. Im gunna try it after work and see if thats it.
I recall an option, something along the lines of "play system sounds on headset" that might be your issue?
I will need to do some digging around in my phone again to find exactly where the option was though.
update-
ok, found the option - in the Bluetooth manager, go to settings (the gears tab) select advanced, audio, and the option is called "Play system sounds on remote hands-free device"
give that a try and see if it solves your issue.
No dice with system sounds settings. Thanks though.
Startin on loadin another ROM now.
It wasnt the ROM. Im gunna blame it on the headset. Im at least gunna try another one and see if thats it. Hopefully it is.
Well it wasnt the headset. Tried a brand new one, and I still have the exact same problem.
In case anyone is interested, I called HTC to see if they could help me out. They told me I would need to contact my service provider and try to escalate the matter so that my service providers tech department would try to develop a patch to fix the problem.
new-b said:
Well, thanks anyways lol.
I flashed a few different ROMs on this phone before I decided I liked the stock one best. So , I loaded Ver. 2.13.531.1 and after some digging it seems that this ROM doesnt play well any blutooth devices. Im gunna try another stock ROM and see if I can get it to work.
Click to expand...
Click to collapse
Really! I'm using Ver. 2.13.531.1 and sony folding BT headphones/headset and, once I paired them, my HD2 and sony headphones/headset adore each other.