Hi,
I've got an O² XDA Neo and since a few days I've got problems with the icons in the taskbar. It looks like they were covered by something. At the moment there is no speaker-icon and a half of the mobile-network icon. I had installed the MagicButton software before and the problem accurs first after I deinstalled it. I tried with Resco to clean the registry manually, but I guess there were no more entrys according to Magic Button software. I don't know what do. Has someone heard of a similar problem or does someone have a solution for this problem?
Thank you for your help.
mrjetter
Have you tried a Hard Reset. That should restore the device back to factory settings
Hi,
a hard reset is the last solution I prefer, but when there is no other one, I think I will do it.
Thank you.
mrjetter
Related
Hi,
I downloaded the free version of FingerClix from clubimate (supposedly 100% discount for clubimate registered users). However, the package I received was titled fingerclix, but contained the Arabic input method.
I've removed the package again, but I've still got an input method at the bottom of the list which is shown as squares (since I don't have the correct font I assume) and I can't find any obvious file to remove or registry key to delete.
Anyone know how to unregister an unwanted input method?
Thanks
Anyone? or is it hard reset time?
Phil
Hi mate,
I had the same prob. Try to install a freeware called "remover". It's a great app and it will let u uninstall completely all the programs that u don't want anymore.
Hi Phil,
This is strange. I've been using Finger Clix for some time now and there is no sign of this program in the input methods. I checked my registry and there is a key in hkey_local_machine\software\apps\Imaginet finger clix. If it is still at your machine. Just delete it.
There is another one in: hkey_local_machine\software\apps\Controlpanel\finger clix.
Maybe there a more but I found those two.
Just give it a try.
Wouter
Hi,
The problem has been solved in a roundabout way by the fact that I just got home and found my imate won't boot at all even though it was OK an hour ago (the same old prob I've seen reported before, where you take the battery out for a few seconds, put it back and the imate boots, but it's hard reset). :-(
@wouterk: It's not actually Fingerclix, but the distribution of it from clubimate seems to be incorrect (arabic input method instead).
@elio: Thanks, I'll give Remover a try.
Phil
OK, Too bad for you that you had another hard reset. Did you try the 1.72 ROM already?
WOuter
Hi,
I'm waiting for the clubimate release of 1.72, rather than go with the t-mobile beta version, my imates only a couple of months old, so no point invalidating the warranty.
It's only the second time it's done it, so I'm not too worried.
Phil
OK. Just in case. I found the last two ROM which I used not very good. The turning on/off of the radio was terrible and so was the bluetooth sometimes. With this ROM those problems are gone. But if you have no problems, don't worry, be happy! :wink:
Wouter
Hi,
Yeah I got mine with 1.66 on it already, but it's not apparently very good (not that I don't love my imate, kicks the crap out of my p900 + iPaq 3970 combo).
Clubimate have said that 1.72 should be out very soon, I just wish it fixed the cleartype!
I don't mind hard resets so much, I just resync or restore Sprite 3.0 backup, it's the reinstalling all the apps that annoys me - Kirara Genesis, PocketInformat, Fonix, PocketPlus, SideX/PhoneX, Resco Explorer/Picture, Sprite Backup, 1-calc, Space Reclaimer, ARRGHH! and don't forget 60MB worth of games
Phil
Hi have have a problem with my Bluetooth ICON not being in the task bar (bottom right), I have norrowed it down to be a today plug in called PocketBreeze (One of the best pices of software I have found for the Pocket PC, take a look: http://www.sbsh.net/products/pocketbreeze/)
It does work 100% on a few friends XDA II's but not on mine.. I have done a hard reset and all. A few people are having this problem, I have spoken to the developer and he is trying to find a way to fix this problem... Does any one know what it might be or how to fix it?
This is what I have found:
Basically if the device is booted up with PocketBreeze loaded I do not get a Bluetooth Icon on the bottom right of my screen, If PocketBreeze is disable when loading the OS I do get the Bluetooth Icon loaded. (once the OS has loaded up I can then load PocketBreeze with no problems works 100% with Bluetooth Icon)
Regards
Fudge!
No one has any ideas as to why the Bluetooth Icon would disapeer? could it be some sort of loading order problem or somthing like that? is there a way to try and change this? E.g. if PocketBreeze is loaded before Bluetooth in the registory could I rename PocketBreeze to say ZPocketBreeze so it might load last or somthing like that????
Regards
Fudge!
RE
HI,
FYI, I do not have this problem in using PocketBreeze.
i have b4 , my solution just import the my old REG FILE, may be another expert can point out where is value .
Hi Guys thanks for the reply, I have some friends that have not had this problem and some that have. I have been unable to work out what trigers it to happen as yet...
Has any one found that Reg entry that ttt340 mentioned?
Any help is appreciated!
Regards
Fudge!
Hi there,
I don't use pocket breeze but I have the same problem with PI Today from Deje. When this Today plugin is installed, I loose my Bluetooth icon on the Today screen. I had some support mails from the developer but he couldn't solve it.
Somebody suggested that there were too many in the Todayscreen but removing items there (even in the registry) didn't do the trick.
Teguru from tekguru.co.uk came with a handy sollution:
PocketZenPhone which is freeware. It is a plugin for the Today Screen with phone profiles. You can make a profile with bluetooth on. It works great! You can find the PocketZenPhone here on this forum (it has a thread of 102 pages!)
Wouter
thanks for the reply wouterk, I also got told about the to many things on the today screen but it also did not fix the problem.
Thanks for the sujestion about the extra today plugin that could fix the problem but I might wait and see if any one else has any ideas as every today plugin I add makes my Pocket Breeze smaller and smaller :-(... Never enough room... LOL
Many thanks!
Fudge!
Ok fudgebottom,
You're welcom.
I must say I'm very happy with PocketZenPhone but you're right that the today screen is always too small! :lol:
Wouter
Hi,
The BT icon of my magician has disapeared after I installed SPB Plus & Weather.
I've removed them, sof reseted, but the problem goes on.
Any solutions?
Thanks
Turn bluetooth on from Start>Settings>Connections...
Yes, I know, but with the icon I can do it faster!
Thaks anyway.
FoxFire said:
Yes, I know, but with the icon I can do it faster!
Thaks anyway.
Click to expand...
Click to collapse
After you do that, perform a soft reset with bluetooth still on. The icon may come back.
As a last resort, I'd perform a hard reset to get everything back to "as new" condition.
This may not be necessary though.
I have the same problem and I played around with the registry and solved it. No time to go to the detail now. But to point is, try to make the bticon to load much later than it suppose to be which means you need to add something to the registry to delay its startup.
I followed your sugestion. I've changed the value of InitDelay, soft-reseted but the problem is still on!
Thaks anyway!
Please do a search in this forum before asking. This is a common problem that have been talk about many many times. It due to many startup program and today plugins. A program called "No Plugins Today" solve my problem.
Hi all,
I am aware about all the other threads but yet could not get across some nonsense on my MDA Pro.
I went back to the t-Mobile ROM because of german support on many features but running ozVGA now successfully with two exceptions:
1. Each time I reset the device, I have to reinstall vjbigphone (0.91) and re-run the .exe to get my dialer back to full screen. VJ did a real got job, but I hope anyone coud tell me, what could be wrong?
2. Does anyone know, how to get rid of the stupid and ugly video-button in the t-mobile dialer? I replaced all BMPs with the one's from iMate, but yet video is the stupid grey. flat button.
Once this is solved, I will write down exactly how to get really the tiny machine running with the best tools for best results.
Greetings
ndee
ndee: why do you have to re-install the app?
After a soft reset, what happens when you choose the "load and fix" option from the tray?
I am hoping to spend some time on this app over the next few days. Many apps being fixed, one a at time...
V
Hi Vijay,
when I softreset, everything on the phone is back to the tiny layout. Even though I "load and fix".
Only workaraound I figured out is reinstall :-(
ndee
Strange - I know we spoke about this before, but then, after you re-install it works?
Have you tried not loading VJBigPhone, soft reset, load the phone (eg press green key, so you can see Tiny buttons) and then load VJBigPhone. Does that make any difference? Re-installing shouldn't make any difference, it doesn't load any settings etc from the registry etc...
v
I have some similiar problems. I'm using also the neweset german ROM on my MDA Pro and after a soft reset I don't have to reinstall the app, but I have to close it and restart it again to gain access to the phone application. Without close VJBigPhone nothing happens, after starting the application again everything works fine (till the next soft reset, which happens every morning after the daily backup)
Wolfgang
I have an idea what might be the problem then.
The code was modified a while back to try to find the "phone" program without you having to specify the name in your own language (eg "telefon" instead of "phone"). However, it's possible that if the phone isn't found, it's getting confused. I'll try to look at the code again soon.
I'm not writing any new programs for a while while I do updates to all the old stuff
V
out of sudden, I dont need to reinstall anymore. Just after reset, I run vjbigphoneres and phone comes up full screen. Dont know what I did and how long it will last - keep you informed though - thx so far.
Any solution for the ugly video button of TM insight?
ndee
TM Button: I know you've spoken about it for a while, but I've got no experience of it, I don't really use my Universal I think someone (you?) posted one before, but could you send me a screenshot if you've got appropriate software, and if you have them, a zip of your extended rom?
V
I've just tried to unhide my extended rom with help of 2 registry keys. now my device does not boot up. It stays on white blank screen.
What can I do ? (other than hard reset ?)
Is there a way to boot up without reading registry keys ?
is there a way to edit the registry of a not booted device ?
or any way to open device without reading registry ?
Well, I'm only a newbie myself, so I don't know if this will help. I unhid my own extrom yesterday with reg tweaks. There we more than two changes to make, mind you, including the addition of a dword value that didn't exist on my 8525. You don't offer what type of device you are using, so that might limit how much help you get here, btw.
Anyway, have you tried soft resetting by using the stylus in the hole at the bottom of the device? That MIGHT do something different and let you get into the system.
There is a safe mode that some 3rd party offers ... I think SPB PocketPlus...but that won't help if it's not already installed, and I'm not sure it would help in your circumstance.
Anyway...good luck. I hope this, or someone else's advice can help you.
-pvs
pvs,
thank you. I had to hard reset. now I am trying to install everything back.
it will be hard...
Btw, I of course tried to soft reset with the stylus.
My device is I-Mate Jasjam (HTC Hermes)
mrmrmrmr said:
pvs,
thank you. I had to hard reset. now I am trying to install everything back.
it will be hard...
Btw, I of course tried to soft reset with the stylus.
My device is I-Mate Jasjam (HTC Hermes)
Click to expand...
Click to collapse
What you didn't have a comprehensive back up!! Oh dear dear dear. That's a hard lesson I learned a while back. Now I could happily hard reset right now and be fully back up and running in say 10 minutes with SPB backup. A lesson for all.
Mike
in fact I am using SK tools for backup. but my backup was too old.
This is a new device and I installed a lot of software lately.
Well, look on the bright side, you have cleared out all the 'stuff' that builds up on a system after a lot of installing and uninstalling, and you're sure to build it better this time. It's just irritating that this kind of thing usually happens when you have no time.
mrmrmrmr said:
in fact I am using SK tools for backup. but my backup was too old.
This is a new device and I installed a lot of software lately.
Click to expand...
Click to collapse
Mmmm yes I have that problem remembering to do the backup often enough, sods law something goes pear shaped when you haven't done one for a while
Mike
exactly ))
well its going well now...
just losing time.
I need a little help.
After a crash I hardresetted my Hermes and then used SK Tools to return to a backup point. But now when I try to activesync I get a message on my PC saying that the mobile device has already synced with another PC and it requests a new name for this PC.
I haven't synced with another PC. What shoukd I do ?