Related
Howdy folks.
First post. Came here looking for info on WM5 upgrade for my Magician. I'll leave well enough alone after reading the threads so far. (other than, say for example I "found" :twisted: an installer on the net, if I installed it would it bork my magician?) Does the active sync "full backup" actually back up everything including the OS?))
What I'm posting about though, is there a hack or program that will allow me while I'm making a call to use the directional pad to highlight and press the keypad without resorting to the stylus?
The reason is when I call voicemail or any number that requires me to press an extra number for an extension i have to get the stylus out to press the number. If I could use the pad that would be really nice.
Thanks
just press the green call key and it brings the keypad up and you can use that... and no, the activesync back up doesn't back up the os thats on your rom
Er. I think I might have been unclear. Apologies.
I know how to bring up the keypad to dial numbers.
What I mean is when i'm on a call, I want to be able to dial 3 for example without having to use the stylus on the screen to press the 3 on the keypad. Ideally using the nav buttons to highlight the number and the centre button to press that number.
--
Thanks for the info regarding backup. Might wait till theres a specific WM5 installer for my handset then.
I don't think that what you want to do can be done.
You can prod the screen with your fingers as well as the stylus. :wink:
Oh well. That would of been a really simple way to improve the phones usablity. I try to keep my greasy fingers off the screen wherever possible. :roll:
I can think of a possible way to hack this in, but is there much "call" for it?
It seems like a bit of a specialised need.
V
if your worried about your screen i highly recommend pocket pc techs screen protectors. i ordered them off expansys.com and they're the best. i got two and still using the first one. i've tried several other screen protectors before and nothing matches these. http://www.pocketpctechs.com/main~u...ories-WriteSHIELD%99+AG~action~updateunit.htm
To go back on myself, I can see that this might be a useful feature actually, to be able to dial using just the dpad. slow, but on the VGA WM5 at the moment, it might come in handy.
V
Source Code Finally Posted...
Sorry it took so long to post the source. I haven't been monitoring this thread for some time due to other time demands. A recent email reminded me that I promised to release the source, so here ya go...
Release 6 Notes Below...
About a week ago, I was looking for an app that would lock my wizard when it came out of suspend. I use a bluetooth headset for all my calls, so I rarely remove my phone from its carrier. However, while talking, I tend to move around and frequently the hang-up button would be pressed resulting in a disconnect.
Frustrated, I looked at a few apps. I really like the "Slide to Unlock" feature in the iPhone-like app S2U. It more or less suited my needs. However, my bluetooth headset wouldn't work with S2U installed.
Thus I set about writing an app that would "lock" the phone whenever it came out of suspend mode. The result is the app, LockDown, attached to this post. Once run, LockDown sits in the background waiting for "resume" event. At this time, it locks all keys and prevents any stylus events save one - a "Slide right to unlock" slider control. As with S2U, once the thumb tab is slid all the way to the right, the keys are unlocked and the unit once again responds to the stylus. Also note that LockDown only takes up 5k of memory.
LockDown has been tested on TNT.1933 (WM6) for the Wizard. It's compiled as a PPC 2003 app, so in theory it should also work on WM5 and any PPC 2003 devices. I've tested it with my Visual Studio WM5 and PPC emulators, and it worked fine. However, it couldn't test it on the real deals.
It's a new app. While I'm not experiencing any problems, please consider it beta for now. As such, don't wire it up as an auto-start link until you've run with it awhile and are certain it works as advertised. For now, I suggest just copying it to your \windows folder and linking to it there. If you have any problems, please report them, and I'll address them ASAP.
Release 6 Notes
The slider bug was fixed.
The Message option was fixed.
Application Invocation
Lockdown [-lock] [-close]
With the -lock parameter, the application starts in lock mode.
With the -close parameter, the application is removed from memory (if running).
Registry Options in Folder \HKEY_LOCAL_MACHINE\Software\Lockdown\Slider
Position (DWORD, 0):
If set to 0, the slider is centered.
If > 0, the slider is positioned X pixels below the "Top Taskbar".
If < 0, the slider is positioned X pixels above the "Bottom Taskbar".
Padding (DWORD, 2):
Pixel offsets for slider arrow from the left and right edges of the slider window.
Message (String, "Slide right to unlock.")
The text message displayed in the slider window.
TextColor (DWORD, 00FFFFFF hex):
Color of slider message. Note that the HEX color format is 00BBGGRR where BB is blue, GG is green, and RR is red.
FontPoint (DWORD, 16):
The font size of the slider message.
PenColor (DWORD, 00F04050 hex):
Color of the slider arrow.
BackgroundColor (DWORD, 00CCCCCC hex):
Color of the slider background.
WidthMultiplier (String, .92):
Must be a floating point value. Multiply this value with the lesser value of the desktop height or width (in pixels) to determine the slider width.
For example: If the desktop display is 240 by 320 and the WidthMultiplier is 0.9, the slider width is 216 (240 X .9) pixels.
HeightMultiplier (String, .22):
Must be a floating point value. Multiply this value with the lesser value of the desktop height or width (in pixels) to determine the slider height.
TabWidthMultiplier (String, 1.5):
Must be a floating point value. Multiply this value with the calculated slider height to determine the width of the slider arrow.
Note that the height of the arrow is always equal to the height of the slider.
EnableAnswer (DWORD, 1):
If set to 1, the answer button is enabled during an incoming call period (while the phone is ringing).
If set to 0, the answer button is always disabled.
EnableIgnore (DWORD, 1):
If set to 1, the ignore button is enabled during an incoming call period (while the phone is ringing).
If set to 0, the ignore button is always disabled.
After the installation, only the Position key will be present in the registry. I figure that most users will only tweak this value.
To modify the other parameters, add the appropriate keys with the defined types as shown in parenthesis. The default values are also listed in the parenthesis.
If you decide to tweak these parameters, please remove any shortcut to Lockdown from the StartUp folder. While I've taken steps to prevent "bad" values in these parameters, I still suggest this precaution.
Please note that Lockdown must be terminated and restarted before any changes to registry settings take effect.
As always, if you have any issues, please let me know.
W James
Very Great app...im sure many will find it useful
Does not work on my CDMA Touch
Tried it out but does not run on my CDMA touch.
It work for me on Hermes With schaps wm6 Ver 4.30
thanks.
WJames said:
Greets.
About a week ago, I was looking for an app that would lock my wizard when it came out of suspend. I use a bluetooth headset for all my calls, so I rarely remove my phone from its carrier. However, while talking, I tend to move around and frequently the hang-up button would be pressed resulting in a disconnect.
Frustrated, I looked at a few apps. I really like the "Slide to Unlock" feature in the iPhone-like app S2U. It more or less suited my needs. However, my bluetooth headset wouldn't work with S2U installed.
Thus I set about writing an app that would "lock" the phone whenever it came out of suspend mode. The result is the app, LockDown, attached to this post. Once run, LockDown sits in the background waiting for "resume" event. At this time, it locks all keys and prevents any stylus events save one - a "Slide right to unlock" slider control. As with S2U, once the thumb tab is slid all the way to the right, the keys are unlocked and the unit once again responds to the stylus. Also note that LockDown only takes up 5k of memory.
LockDown has been tested on TNT.1933 (WM6) for the Wizard. It's compiled as a PPC 2003 app, so in theory it should also work on WM5 and any PPC 2003 devices. I've tested it with my Visual Studio WM5 and PPC emulators, and it worked fine. However, it couldn't test it on the real deals.
It's a new app. While I'm not experiencing any problems, please consider it beta for now. As such, don't wire it up as an auto-start link until you've run with it awhile and are certain it works as advertised. For now, I suggest just copying it to your \windows folder and linking to it there. If you have any problems, please report them, and I'll address them ASAP.
W James
Click to expand...
Click to collapse
hi WJames,
any screenshots of your app? it sounds very usefull, but how does it look
like?
today plugin s2u
it was a dream cam true if was a today plugin, to the left...lock, to the right ...unlock, but in the today,
I use my standard windows lock today plugin, without the lock buttons, so when i touch any buttom , the backlight goes on (to see the clock and appointments in one clic).
today plugin s2u is the rigth way.
great work
red.schumi said:
hi WJames,
any screenshots of your app? it sounds very usefull, but how does it look
like?
Click to expand...
Click to collapse
as he said...it sits behind the screen..and waits for the resume event
Here's a screen shot as per request. It's very plain jane. I wasn't looking for the beauty of something like S2U. I merely wanted a functional app that didn't take up much real estate (5kb).
Once it's gone through the paces and looks to be bug-free, I'll release the code and you can tweak to meet your needs.
It gives a black screen with white text in the center of screen saying "Slide right to unlock." There is a box with a plain white slider. You cannot see your today screen.
edit: Sorry, had the page open while I tested it and did not notice your reply before posting.
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
smittyofdhs said:
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
Click to expand...
Click to collapse
To each his own, but i run S2U2 because it allows me to operate my phone via bluetooth while the buttons are locked. The builtin lock doesn't let me do that.
perasite said:
To each his own, but i run S2U2 because it allows me to operate my phone via bluetooth while the buttons are locked. The builtin lock doesn't let me do that.
Click to expand...
Click to collapse
Hmm, never had that problem with bulit-in lock. Yes, to each their own. I've installed/uninstalled S2U2 soooo many times. I love the app but end up finding that it serves me no real purpose (other then eye candy) and it gets uninstalled. New version comes out, installed for a about 3-4 hours, then uninstalled again.
Very Nice...can i Request something?
Hi
Thanks for the nice application
very small, problem free so far (on Eten M700 with WM6) & useful
Can i have 3 requests please:
1- can you make the slider spring back to the left if it was accidentaly moved to the right, right now it stays half way & i think if you make it spring back it will be more safe as a lock & it will look better too
2- can you make the slider button wider (double) so i can catch it with my fat fingers
3- can you add an icon, so i may put it in my today launcher list & it would look better than the plain white square, something like a lock or key or a hand can do.
I also noticed that sometimes as i come out of the suspend mode, the slider is either late to appear (1-2 sec) & may remain unresponsive for two or three trys to slide it to right (stays in place)
Once started i couldn't figure how to get rid of it & seems that only way is to soft reset to go back to normal wake up without locking
Hope these comments help..thanks again for nice work
smittyofdhs said:
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
Click to expand...
Click to collapse
Those apps you mentioned take a ****load of memory and add to battery drain because of all the animations and graphics. His is a simple slide function that sips memory and battery life. Very useful IMO. Sliding is good cuz I find unlocking the WM way to be annoying. I have to touch an icon to lock. Then to unlock, I have to press two buttons. With sliding, it locks automatically and unlocking is accompished in one simple motion.
You're right that there's already enough S2U programs.
I also think S2U2 is an awesome balance between beauty and speed/mem cost. For people who have only tried S2U, you really need to change to S2U2... WAY faster and stable!
In most cases, yes S2U isn't that necessary, as it's similar an extra step to get to your today page, but I need it because:
1) My alarms don't wake if the phone is on standby, so I put it onto S2U2 mode when I sleep
2) My audio manager doesn't go to the next song if the phone is on standby, so I have to lock my phone while listening using S2U2
I question how good it'll be to have Slide 2 Lock as a today plugin, since I don't need some extra waste of space. What I do is set the gesture right-to-left (using FTouchFlo) to execute S2U2 so when I slide right to left, it opens S2U2, then sliding left to right, unlocks it. Love it!
smittyofdhs said:
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
Click to expand...
Click to collapse
I hate to say it, but that's not quite true. If you setup the lock all buttons, sure you won't accidentally turn it on, but if you get a phone call, it doesn't just power right off (at least my 6700 doesn't) - it can and has made phone calls like that...
And as for the S2U/2 - they use quite a bit more memory than this. A 5k program use is great, although I won't use it because I like the clock on s2u2.
Great App
This is all I ever really wanted. Just a very simple slide unlock. simple.
Excellent.
thanks.
This simple slide to unlock app is perfect for my needs...Thanks!
The point here is WJames created an application for his own use and shared it with everybody. If someone think that it is not req. they might not use it. Anyway thanks for the nice little app.
Thanks! Great small app. Would be fantastic with a simple white clock above the lock bar though, so we could check the time on the phone without unlocking it. Thanks a bunch!
Having written StylusLock I wanted an additional lock/unlock method. Although StylusLock works great, I wanted some extra features:
* to have it possible to lock and unlock "one handed". The StylusLock approach cannot be done "one handed", e.g. on a bike.
* Also some people do not like to operate with the StylusLock (always).
* The combination with this new CapacitiveFingerLock and existing StylusLock will suit more people.
* And sometimes people will use the Stylus, so they will get the right behaviour depended on the usage pattern
* Still the goal is to let it consume almost no CPU and battery and KISS to operate
I discovered with StylusLock that when the TouchPanel and Hardware keys are locked, still the Zoom function works in e.g. Opera.
You can try yourself, using StylusLock:
1. Start Opera
2. Lock the Touch Diamond or Touch Pro with StylusLock
3. TouchPanel and all hardware keys are locked
4. Try to Zoom in/Zoom out in Opera, this still works with the NavWheel
5. Also the Ok button seems to react
I figured out via Scott Seligman and Koushik Dutta how to programmatically access the Capacative Touchpads. You can read also more here: [REF]Capacitive touchpad apps
So this idea is implemented in CapacativeFingerLock. But I am not using the NavWheel idea, but just uses the Capacative hardware area for locking/unlocking. The idea is again simple and clever. When you softly touch the area where the hardware keys are located (so do not press the keys, just gently touch them), the up/down and position area can be detected. I programmed that when the same area is touched gently 3 times within a second (without touching another area), the lock status is toggled.
I made a proof of concept program (just copy the exe inside the zip file attachment to your phone and just execute it), which shows how it is going to work. Just play around with softly touching the hardware panel, to see what happens.
If am working on integrating CapacativeFingerLock with StylusLock, to have a working "real locking" application. The Proof of Concept program just shows that it is possible.
Reserved for future use
Another one for future use.
very nice concept....now i noticed you posted a link of this thread in the wheel to unlock thread...would there be a way to possibly implement a config tool that lets you choose say, touch 3 times softly, or run your finger around the circle?
Malik05 said:
very nice concept....now i noticed you posted a link of this thread in the wheel to unlock thread...would there be a way to possibly implement a config tool that lets you choose say, touch 3 times softly, or run your finger around the circle?
Click to expand...
Click to collapse
In principle this can be done. But because the NavWheel is also used for other purposes (Zoom In/Out), I have chosen not to use the NavWheel, but the 3 times gently touching. In this way there is no interference with other existing applications.
I'll try that, it seems like no one cares aboyt the capacitive touch pad, it seems like an amazing thing that we've got that is so neglected. I hope to give some positive feedback later, but first I have some rom flashing to play with!
Thanks for the work, there must be so many possible implementations for this, I hope this is just the beginning of something much bigger.
How about a simple tap to launch app?
i went ahead and installed it, and it works very well...Will there be a (pretty) GUI to show that it was unlocked?
Also the diamond does have multi touch on that pad area, which enables a "trace" of the movement of your touch
http://www.youtube.com/watch?v=f3Owgcos_KY
Since the nav sensor wont be so ideal, how about sliding your finger from the top of the pad to the bottom (lets say, place your finger on the back button, and gently moving it down to initiate unlock, with a GUI on the screen following your movement, as you go closer to the bottom, the color changes from lets say, red, to green...with incremental color changes in between)
Instead of 3 taps, why not a swipe between the home and back keys, which seems much more natural.
Surur
surur said:
Instead of 3 taps, why not a swipe between the home and back keys, which seems much more natural.
Surur
Click to expand...
Click to collapse
I imagine it is just harder to implement for a proof of concept.
Personally I think there are enough ways to lock the diamond, whether you swipe the screen or 1cm below it is not a revolution, but if swiping the capacitive touch pad could be made to launch desired apps from selected gestures, that would be a revolution, like dynamo3 or hibernate or even standby. I think a lot of people here would want that over another locking solution. Good will intended!
Just tried it.
This is very cool very very cool
Thanks for time invested in such a cool development.
surur said:
Instead of 3 taps, why not a swipe between the home and back keys, which seems much more natural.
Surur
Click to expand...
Click to collapse
Swiping is not so easy one handed. Touching gently 3 times is much easier one handed, holding your Touch Diamond or Touch Pro firmly and touching with your thumb.
However, I can imagine other sort of applications which can use the swiping for other sort of operations. Both are possible with the programming API I made.
uniqueboy said:
I imagine it is just harder to implement for a proof of concept.
Personally I think there are enough ways to lock the diamond, whether you swipe the screen or 1cm below it is not a revolution, but if swiping the capacitive touch pad could be made to launch desired apps from selected gestures, that would be a revolution, like dynamo3 or hibernate or even standby. I think a lot of people here would want that over another locking solution. Good will intended!
Click to expand...
Click to collapse
I am going to share the source code. I have written it in C#. And others can get ideas and take over some of the source code for their own application. At the end we profit all of it.
ZuinigeRijder said:
I am going to share the source code. I have written it in C#. And others can get ideas and take over some of the source code for their own application. At the end we profit all of it.
Click to expand...
Click to collapse
I like your style, that is the the kind of development attitude that keeps here!
ZuinigeRijder said:
Swiping is not so easy one handed. Touching gently 3 times is much easier one handed, holding your Touch Diamond or Touch Pro firmly and touching with your thumb.
However, I can imagine other sort of applications which can use the swiping for other sort of operations. Both are possible with the programming API I made.
Click to expand...
Click to collapse
If you are open to other ideas, I would love the area from the back to home key to be a scroll bar when the device is in landscape mode. Grabbing the narrow on-screen scroll bar can be tricky, and the Touch Pro lacks the scroll wheel of the HTC Kaiser.
Surur
Have been looking into this myself as well. The only code I found was managed C#. Do you think we can use this in our native C code? Looks promising though!
ZuinigeRijder said:
Having written StylusLock I wanted an additional lock/unlock method. Although StylusLock works great, I wanted some extra features:
* to have it possible to lock and unlock "one handed". The StylusLock approach cannot be done "one handed", e.g. on a bike.
* Also some people do not like to operate with the StylusLock (always).
* The combination with this new CapacitiveFingerLock and existing StylusLock will suit more people.
* And sometimes people will use the Stylus, so they will get the right behaviour depended on the usage pattern
* Still the goal is to let it consume almost no CPU and battery and KISS to operate
I discovered with StylusLock that when the TouchPanel and Hardware keys are locked, still the Zoom function works in e.g. Opera.
You can try yourself, using StylusLock:
1. Start Opera
2. Lock the Touch Diamond or Touch Pro with StylusLock
3. TouchPanel and all hardware keys are locked
4. Try to Zoom in/Zoom out in Opera, this still works with the NavWheel
5. Also the Ok button seems to react
I figured out via Scott Seligman and Koushik Dutta how to programmatically access the Capacative Touchpads. You can read also more here: [REF]Capacitive touchpad apps
So this idea is implemented in CapacativeFingerLock. But I am not using the NavWheel idea, but just uses the Capacative hardware area for locking/unlocking. The idea is again simple and clever. When you softly touch the area where the hardware keys are located (so do not press the keys, just gently touch them), the up/down and position area can be detected. I programmed that when the same area is touched gently 3 times within a second (without touching another area), the lock status is toggled.
I made a proof of concept program (just copy the exe inside the zip file attachment to your phone and just execute it), which shows how it is going to work. Just play around with softly touching the hardware panel, to see what happens.
If am working on integrating CapacativeFingerLock with StylusLock, to have a working "real locking" application. The Proof of Concept program just shows that it is possible.
Click to expand...
Click to collapse
A while ago I posted about the Windows Messages received by the form for capacitive touch events. Is that what you ended up using to figure out where on panel is being touched? Mind posting some code so I can add it to the Sensors assembly?
Great idea. Defienetly it will be my way of locking device. StylusLock works nice but can't be operated by one hand so its useless for me. SensorLock uses battery and i've drop my phone already unlocking it.
surur said:
If you are open to other ideas, I would love the area from the back to home key to be a scroll bar when the device is in landscape mode. Grabbing the narrow on-screen scroll bar can be tricky, and the Touch Pro lacks the scroll wheel of the HTC Kaiser.
Surur
Click to expand...
Click to collapse
This can be surely done, programmatically. But I do not know if you can control the scrolling of other applications. The latter seems to me difficult?
Anyway, when a lot of applications are going to use gestures using the capacative areas, there will be going conflicts (different programs reacting differently on different gestures).
For the locking application I want to made, I see also some different gestures possibilities:
- 3 taps for locking/unlocking
- swipe left to right for Power off
- swipe right to left for starting a configured application
And I am sure I can come up with other gestures and actions....
drvdijk said:
Have been looking into this myself as well. The only code I found was managed C#. Do you think we can use this in our native C code? Looks promising though!
Click to expand...
Click to collapse
Actually I started with C++ and had also a working Proof Of Concept. However, because I am new to Windows Mobile Programming, I also wanted to use C# as next project. I have developed programs in a lot of languages (also in C++ and C#), but I like C# more. And I wanted to do this now for Windows Mobile, to get experience with this. Note that the C# sample is using only .NET 2.0, so you do not need .NET 3.5.
You can find a C++ sensortest program, which was available on Scott's weblog:
http://scottandmichelle.net/scott/cestuff/sensortest.zip
ZuinigeRijder said:
This can be surely done, programmatically. But I do not know if you can control the scrolling of other applications. The latter seems to me difficult?
Click to expand...
Click to collapse
I dont know if you can manipulate the scroll bar of another application directly (though this would be ideal) but at the least maybe a page down keystroke could be sent to the active window.
Surur
As seen on Sony Ericsson W380 Gesture control
"Another novel feature of the W380 is its gesture control. Switch this feature on and you will be able to silence incoming calls or snooze alarm clocks by simply passing the palm of your hand above the sensor"
Well maybe this is a long shot but anyone has any idea if a program like that exists on WinMo?
Well as far as I see Sony made this Feature with help of a proximity-sensor and the only Phone/PDA I know which has one is the TouchPro 2
But there are a lot of Apps which let you silence Calls (built-in in most htc devices) and let you snooze alarm clocks by shaking or turning the Phones, also they let you unlock your Device and soooo much more funny things =)
give it a shot
Vicyl said:
Well as far as I see Sony made this Feature with help of a proximity-sensor and the only Phone/PDA I know which has one is the TouchPro 2
But there are a lot of Apps which let you silence Calls (built-in in most htc devices) and let you snooze alarm clocks by shaking or turning the Phones, also they let you unlock your Device and soooo much more funny things =)
give it a shot
Click to expand...
Click to collapse
yeah, but without touching the device? i guess if there is an app that enables camera when phone rings this thing can be done
Well you're free to try but i don't think you're chances of success are high
good luck
nicandris said:
i guess if there is an app that enables camera when phone rings this thing can be done
Click to expand...
Click to collapse
you can execute camera app with mortscript on the incoming call i think.
i think the i900 has proximity sensor......
sorry it doesnt.......
i8000 Omnia2 has it!
yup thats right..........
does it have it as a device you mean or does it work as an application?
...
think best/easiest way on HD wouldbe light sensor on top.
So on incoming call it should check if there is a short light-interruption.
Prob:
just works if phone shows face up on your desk
And won't work if room is dark (perhaps could work other way round - if it's too dark - check for short light notice, reflected by your hand from display)
otherwise is would be to hard and battery intensive cause you have to check both cameras (back and front) for changes.
I know silencing without touching it sound interesting but its a bit too playful for me.
Cause pressing vol down button is fastes way to silence.
Another way already included in some progs is turning phone face down to silence - think it's as stylish as waving to your phone.
greets
FrEcP
FTouchSL has some screen based user definable gesture controls and is an extremely useful app, but no proximity controls.
FrEcP said:
...
Cause pressing vol down button is fastes way to silence.
Another way already included in some progs is turning phone face down to silence - think it's as stylish as waving to your phone.
greets
FrEcP
Click to expand...
Click to collapse
so g-sensor can be used also. i think it's used by g-alarm on snooze, anyone seen it for silence also?
Hey Everyone!
I'm sure most of you have, like me, spend quite some time on trying different shortcuts for starting your favorite application.
Of course I changed the two softkeys on the start menu and installed an iphone-like launcher (Launchpad) but thats not good for the "heavy-used-apps".
I tested lots of little helpers like
G-Trigger (where you accelerate your device e.g. from left to right to start an app)
or
Butler (which lets you start apps by stroking from one hardware button to another)
or
GScroll (which is my favourite, you can assign different apps for touching the hardware buttons, but which has the problem that you often incidentally start an app)
Now I had an idea for a sounds-great-to-me helper:
To start an app, you touch (not press) the center button and tilt the device at the same time. Like gScroll this would make it possible to start many different programms with combinations like two times left or left and up or ...
while the likelihood of incidentally starting an app is low since you seldom have your finger lying on the center button.
Does anyone of you guys has the knowledge to make a workable program or to edit your already existing program to do this?
Or, am i just stupid and there already is such a great app, and all of you guys are already using it
Well, thank you, and Tschüß from old-germany..
JackWiDu
jackwidu said:
Hey Everyone!
I'm sure most of you have, like me, spend quite some time on trying different shortcuts for starting your favorite application.
Of course I changed the two softkeys on the start menu and installed an iphone-like launcher (Launchpad) but thats not good for the "heavy-used-apps".
I tested lots of little helpers like
G-Trigger (where you accelerate your device e.g. from left to right to start an app)
or
Butler (which lets you start apps by stroking from one hardware button to another)
or
GScroll (which is my favourite, you can assign different apps for touching the hardware buttons, but which has the problem that you often incidentally start an app)
Now I had an idea for a sounds-great-to-me helper:
To start an app, you touch (not press) the center button and tilt the device at the same time. Like gScroll this would make it possible to start many different programms with combinations like two times left or left and up or ...
while the likelihood of incidentally starting an app is low since you seldom have your finger lying on the center button.
Does anyone of you guys has the knowledge to make a workable program or to edit your already existing program to do this?
Or, am i just stupid and there already is such a great app, and all of you guys are already using it
Well, thank you, and Tschüß from old-germany..
JackWiDu
Click to expand...
Click to collapse
Not exactly what you asked for. With TouchLockPro you can couple 8 commands to NavSensor moves and 4 commands to Gsensor orientation moves. But of course, in the first place it is a locking application.