Database Users

What T9 Software works with the Trinity/VFcGPS

Hi all,
i got my Vodafone compact GPS two weeks ago.
Since then i tried to install some T9 software, none of them worked
I tried:
- HTC PhonePad
- Intellipad
- Spb Full Screen Keyboard
- TenGO Thumbs
- Blimkeys
- D9
Sometimes i got one of the above progs running but not for long.
If i tried to start the prog after a while its not working anymore.
Is this problem only my problem or is it a "feature"?
Does one of you guys has a good idea for my problem?
Thanks
Horst

check this thread. Phonepad probably does work if you follow these steps.
last post in the thread
http://forum.xda-developers.com/showthread.php?t=295164

Hi,
Try searching this forum about phonepad on the trinity. There is a tweak you can use to make phonepad work
W

Thanks for the link... it worked

it worked for me to, on a Trinity "SFR300+" with HTC Rom
Thanks

Kaiser keyboard language problem

Hi,
I have a Kaiser (T-Mobile MDA III) with a German keyboard (QWERTZ) layout.
The Kaiser
Since I'm Dutch I changed to ROM to English and changed the keyboard to German layout via Start - Programs - Utilities- Device Config - Advenced Config - Keyboard.
But still when I press the "z" key the "y" is displayed.
What can be done about this?
I'm running L26_WM6 (HTC Kaiser WWE version_3) Kaiser has SPL running.
Is it also possible to switch hardware german keyboard against english one? And if yes where can they be bought?
Thanx

hi, i think that is what you looking for.
i've found it after hard searching days...
the XDA_JCE... cab makes the hardware keyboard 100% german, (FN)+SPACE is also working!
try it.
a lot of people have this problem, too. help me share this file in other threads, if it works on your kaiser.

klick
double post

well i have the same problem , my device is qwerty and i would like to have the keyboard in azerty

Any solutions für the Screenkeyboard?

shell said:
Any solutions für the Screenkeyboard?
Click to expand...
Click to collapse
TRy Resco Keyboard or PCM Keyboard.

all those available cabs or reg strings doesnt work anymore. I think this issue has been somehow introduced with a newer OS bulit. I do have the same problem with my wizard hardware keyboard....
regards

This is the solution for my German Kaiser running WM6.1 WWE

For this problem on Wizard. http://forum.xda-developers.com/showthread.php?t=290967
Works on my G3 and G4 with WM6 an WM6.1 WWE

MiZi666 said:
hi, i think that is what you looking for.
i've found it after hard searching days...
the XDA_JCE... cab makes the hardware keyboard 100% german, (FN)+SPACE is also working!
try it.
a lot of people have this problem, too. help me share this file in other threads, if it works on your kaiser.
Click to expand...
Click to collapse
Hey everyone.
I know, that the last post was 2 years ago, but I've got huge problem with my HTC TyTN II. I reseted the device to manufacturer settings and after this action, I can't bring my hardware keyboard to be german again. My Kaiser is running on shifu_4.0 WWE ROM-Version (don't know, what it means, i've bought it like this) and this ROM is english. Before hard reset, i've installed this XDA_JCE... package and it worked just fine. Now I get the "Z" on the right place and "ß" is also available, but [FN] and SPACE are not working. I really type a lot on device and need hardware-keyboard with working Symbols. Do anyone know, how i deal with this problem.
Thanks a lot
Arti

Artishock said:
Hey everyone.
I know, that the last post was 2 years ago, but I've got huge problem with my HTC TyTN II. I reseted the device to manufacturer settings and after this action, I can't bring my hardware keyboard to be german again. My Kaiser is running on shifu_4.0 WWE ROM-Version (don't know, what it means, i've bought it like this) and this ROM is english. Before hard reset, i've installed this XDA_JCE... package and it worked just fine. Now I get the "Z" on the right place and "ß" is also available, but [FN] and SPACE are not working. I really type a lot on device and need hardware-keyboard with working Symbols. Do anyone know, how i deal with this problem.
Thanks a lot
Arti
Click to expand...
Click to collapse
you'll find a way out at http://forum.xda-developers.com/showthread.php?t=394857
(read the posts by khals)

Nothing works. I've tried every possible method with changing Registry, installing other cab's etc. The problem is, I always had Symbian before and don't really know, what I've got to do. Should I perhaps reinstall the ROM? Perhaps on the base of native german one? Do someone know a god one?
Thanks
Arti

Artishock said:
Nothing works. I've tried every possible method with changing Registry, installing other cab's etc. The problem is, I always had Symbian before and don't really know, what I've got to do. Should I perhaps reinstall the ROM? Perhaps on the base of native german one? Do someone know a god one?
Thanks
Arti
Click to expand...
Click to collapse
if so try to install the cab file below...
hopefully this can help you

How to use another keyboard on my P3600?

I am desperately looking for a (working!) method to use another keyboard (like the good cootek touchpal keyboard) on my HTC P3600 (WM5). I tried the software IMSelector as well as SIPChange but it works only a few times!I reboot many times but I always keep the default keyboard...
Can someone help me?
Thanks in advance

I'm not sure about free software but I use SKTools and it get me the correct keyboard all the time.

I've got SKTools !
But how to use it?

Hi,
I have an identical problem with the TouchPad or TouchKeyboard installed on my P3600. I've found that removing some of the object on the Today screen help TouchPad to start. So today, i've only a few items (messaging and SBP Diary) on my Today screen.
I also wait a little bit before entering my pin code for the phone until i see touchpad started (it shows the keyboard for a few seconds).
Since then, i "don't" have so much problems.
Ced

Thanks for your help!

what about the pocketcm keyboard?
www.pocketcm.com
i use this on my p3600 (wm6) and it works well.

I already used it but I had the same problem as the touchpal keyboard

nicus said:
what about the pocketcm keyboard?
www.pocketcm.com
i use this on my p3600 (wm6) and it works well.
Click to expand...
Click to collapse
you say you have p3600 with wm6 !?
I've asked htc to know if there is an upgrade to wm6 and they said NO !
how can upgrade my p3600 to wm6?
I'm french, so i want if it's possible an upgrade in french ...
Thank's for your respons

Alternate SIPs not showing up is a well discussed problem in the Trinity forum, having just reinstalled everything on my own Trinity it seems that it is memory related, once the free RAM is below about half then alternate SIPs tend to be reluctant to work reliably.

Activation of the Letter/Block Recognizer cookbook

Hi all,
I just received my HTC TOUCH2, and was very desapointed to see that the Letter/Block Recognizer wasn't available.
I found a couple of threads on the subject, mis of registry tweaks, cooked rom's ... Also searched around for an easy-non-risky solution.
And...MIRACLE. After consolidating misc post, I found 2 old cabs (attached), installed them, and it WORKS perfectly!!
Procedure:
1. install both cabs
2. run "bloc recog" program, it will enable/install? letter/block recognition deature
3. run SIPChange program, and select your favourite input method
Cheers
Sam

Works like a charm!!!! Thanks..

Thanks dude, works fine

THNX MATE.. YOU ARE GOD
ive been looking for this for ages, ive been writing HTC for ages as well with no result. Plus i crashed my devise at least 5 times while trying to get letter recogiser back.
Thnx once again...

where can I find the application bloc recog??
installation works fin,
SIPChange I can find but where is the bloc recog to enable the recognizer?

In the SIP change drop list

Hi,
Thanks man, this works just fine......
Thanks again.
HRD

Thanks
Works well on my HTC 2 .
Cheers

groucho3016 said:
installation works fin,
SIPChange I can find but where is the bloc recog to enable the recognizer?
Click to expand...
Click to collapse
I have the same problem.
I have installed both cabs. In the start directory I can find only SIPChange program, but "block recog" seems to be nowhere.
Adjusting settings in SIPChange doesnt have any effect

Thanks a lot for this hint.
After years with the TytnII I and being used to block recognizer I changed to the touch2 - and the missing BR war driving me crazy.
These two simple steps improved the touch significantly - and now I really do nor regret my choice anymore.
Thanks

Real phonepad anyone?

Is there a real phonePAD for HTC WM6* ! i downloaded here a some and non of them is working properly! Is there any like in Amarul3s ROM ?

tebra2000 said:
Is there a real phonePAD for HTC WM6* ! i downloaded here a some and non of them is working properly! Is there any like in Amarul3s ROM ?
Click to expand...
Click to collapse
I've uploaded these 2 cabs I used to use, can't remember what the differences are between the 2, not even sure how they work on vga, but I used to use them on my old orbit with wm6.1 with no problem.