Skype on X01HT - 8525, TyTN, MDA Vario II, JasJam General

I installed Asukal's MUI (Thanks Asukal, really useful...)
However installing skype... leads me to a japanese version of skype... Whatever I do... Whcih is reallya pain for me !
Anybody had this problem ? Some ideas on how to fix it ?

I've installed Skype on my X01HT now twice, once with the JasJam rom, and once with the new Softbank Rom, using Askuls hack.
The key is that I downloaded the CAB file directly from Skypes site, and then executed it on the phone after transferring it to the card. If you're having trouble getting to the english version of the skype site from in Japan, just scroll to the bottom, and select the english language version of the page. It took me awhile to find it, but you'll eventually get the language of the page, and program of your choice. Good luck!

ihorner said:
I've installed Skype on my X01HT now twice, once with the JasJam rom, and once with the new Softbank Rom, using Askuls hack.
The key is that I downloaded the CAB file directly from Skypes site, and then executed it on the phone after transferring it to the card. If you're having trouble getting to the english version of the skype site from in Japan, just scroll to the bottom, and select the english language version of the page. It took me awhile to find it, but you'll eventually get the language of the page, and program of your choice. Good luck!
Click to expand...
Click to collapse
Unfortunately that's what I did (get the cab from my PC, on the English website)
Anyway if it worked for you, it should work for me
So I am going to give it a try once again ! (And check each step this time !)

Skype CE is multilingual application, no matter what you install, it seems to check your localization settings on startup and change language according to it. On my x01ht I had to open Skype in Japanese and than change language in Skype options...
It should not be hard, just follow these steps (I assume no WiFi available):
1. Open Skype
1a. If you get warning that you can only use cellular network, accept it (I don't remember which button, try left)
2. Sing in with your username and password, tap サインイン button
3. Confirm WiFi not available windw (OK)
4. Go to menu (メニュー)
5. Go to setup menu (設定 (E))
6. Select English language in language menu (言語), confirm OK, OK
7. Exit Skype, menu (メニュー), exit (終了(G))...
At next Skype start, everything should be in English...

Related

How t remove T-Mobile colours from your device

So here is the procedure of getting rid of T-Mobile's customization:
The whole proccess means you will do a hard reset and you will be installing everything from the beggining! So if you don't want that to happen you have to stay with T-Mobile's customization!
Step 1
Hard reset your MDA Compact (power+soft reset). Do all the neccesary steps (choosing your country and timezone) and when you get in the screen that tells you to tap the screen in order to start working have your stylus at the soft-reset hole tap the screen with your finger and do a soft reset IMMMEDIAELY AFTER YOU TAP THE SCREEN!
Step 2
Your MDA compact will restart without any customization it will be a clean Windows Mobile 2003SE. With the file manager go to the Extended ROM folder that is now visible and install the following files:
Caller_ID_WWE_RC10.CAB
Camera_Patch_WWE_B15.sa.CAB
GPRSMonitor_WWE.sa.CAB
Java_10.1.2.57_WWE.CAB
MMS_2.0.0.13_WWE.CAB
MMS_Settings_WWE_NL.CAB (This file will install the settings of T-Mobile NL but if you don't install it and then change the settings to your providers settings most probably will end up with MMS that does not work. So install those settings and change them accordingly to your providers settings)
Patch_101123.sa.CAB
Version_WWE_101124.sa.CAB
Zip_Magician_T-Mobile_WWE_B12.CAB
Those are all the files you need to install. For those who need intellipad and intellidialer they will also have to install the 2 files for those programs.
http://www.compactjam.com/forum/forum_posts.asp?TID=53&PN=2&TPN=4
GPRS Settings
I did all the above!!
But now I can't use Internet Explorer anymore.
I don't have te right settings!!
I'm using a O2 card in the phone!!
Can someone help me???
Re: GPRS Settings
zanders77 said:
I did all the above!!
But now I can't use Internet Explorer anymore.
I don't have te right settings!!
I'm using a O2 card in the phone!!
Can someone help me???
Click to expand...
Click to collapse
Download the 02 settings from clubimate.
intellidialler does not work
I have a T-mobile MDA Compact in the UK.
If I follow these instructions it works fine - thanks. (SOme of the CAB files are UK versions or have later version numbers.
1. Is there a list anywhere of what each of these CAB files does?
2. The Dialler becomes crappy (formatting numbers in the US way, and not searching for contacts). The default microsoft colours are much more intuitive for showing missed calls/received calls etc in the recent calls list than the T-mobile palette, but i can't make the dialler search the address book in the very clever way it usually does. The intillidialler won't install either.
Any ideas?
Thanks,
Nigel.
Has anyone found decent versions of intellipad and intellidialler to install after doing the debrand on a UK Compact?
Quick question, i did all this and it worked fine for me, orange sim is working happily away when i unlocked the device via IMEI check and installed the orange rom but i've lost the clearvue products suite. I've looked in the extended rom partition but i can't find it
love this thing tho...still fiddling with it 2 months down the line
and how do i get the default microsoft colours?
27 said:
Caller_ID_WWE_RC10.CAB
Camera_Patch_WWE_B15.sa.CAB
GPRSMonitor_WWE.sa.CAB
Java_10.1.2.57_WWE.CAB
MMS_2.0.0.13_WWE.CAB
MMS_Settings_WWE_NL.CAB (This file will install the settings of T-Mobile NL but if you don't install it and then change the settings to your providers settings most probably will end up with MMS that does not work. So install those settings and change them accordingly to your providers settings)
Patch_101123.sa.CAB
Version_WWE_101124.sa.CAB
Zip_Magician_T-Mobile_WWE_B12.CAB
Those are all the files you need to install. For those who need intellipad and intellidialer they will also have to install the 2 files for those programs.
Click to expand...
Click to collapse
Can you tell me where can i find all those CAB's and intellipad and intellidialer CAB's. Please because I'm a new about this stuff :lol:

List of New and Updated Softwares in Extended ROMs

I have checked through almost all of the Extended ROMs of the various versions of the 1.12 ROM at ftp://xda:[email protected]/Magician/Extended_Roms/ and ftp://xda:[email protected]/Uploads/Magician/
The following is a list of useful add-on softwares and most up-to-date HTC programs:
SPB GPRS Monitor Version 2.2.0 build 487
(Registered version)
PacketVideo pvPlayer Version 3.3 build 007
(for playing .mp4 and .3gp files)
Fonix Version 2.0 UK English
(voice dialling)
ftp://xda:[email protected]/Fonix2.0_UKEnglish0907_09282004.sa.CAB
EmailWiz Version 2.0.0.3
(by DAT Group, UK, simplifies email settings)
UXC T-Mobile RC23
(Today plugin for T-Mobile, more convenient access to camera, phone, contacts, etc.)
Acrosoft MMS V2.5.0.28
ftp://xda:[email protected]May06.CAB
Java Version 101276
CallerID WWE RC22 Version 1.20 build 20047
(=PhotoContacts,)
Camera Wizard WWE RC23 Version 2.70 build 20117
IntelliDialer RC20 Version 1.0 build 19317
(=SmartDialing)
IntelliPad RC20
(=PhonePad)
You don't seem to have attached the latest ArcSoft MMS CAB, would appreciate it if you could, cheers!
ftp://xda:[email protected]/Magician/Extended_Roms/MDACompact_WWE_1.12.152
ftp://xda:[email protected]/Magician/Extended_Roms/MDACompact_WWE_1.12.152.zip
:wink:
Cheers.
Could someone give the complete address to these downloads since Pocket IE only downloads the PHP-files on attachments in these forums.
Could someone give the complete address to these downloads since Pocket IE only downloads the PHP-files on attachments in these forums.
Thanks Talents, you've saved everyone alot of time there
Some of you may be interested in this:
ftp://xda:[email protected]/Ma...500_WWE1.06.175/Orange_GPRS_Desconnect.sa.CAB
It adds a disconnect option to the GPRS popup. Only realised it was an Orange thing when i put the 1.12 rom on my M500 and saw it had gone.
some of the files you've attached say tmobile on them.. does that brand the phone? will i have t-mobile popping up on every app i open. I bought my jam from dubai and using it on cingular.. i'm also on the WWE rom, just wondering if these .cab's are compatible.
The cab files are compatible with all HTC Magician machines (i.e. i-mate JAM, O2 XDA mini, Qtek s100, T-Mobile Compact, Dopod 818, etc.) and will not pop up any brand or logo after installation.
thanks for that info, i will do these updates in about an hour. thanks again
Are these cab-files ripped of the default install on the windows-dir?
Fonix voicedial is eating a lot of memory of the ppc. The normal installation (downloadable at fonix) can install on the sd card, but the extended rom versions i have seen only install totally on phone memory
pkaak said:
Are these cab-files ripped of the default install on the windows-dir?
...... but the extended rom versions i have seen only install totally on phone memory
Click to expand...
Click to collapse
Use CAB-Installer. With that, you can choose where to install.
Cheers.
Hans
Many thanks for your efforts. Very informative.
V
Thanks for the effort mate, I shall have a play with those.
Will ask one more time: I am on holiday so my only internet-connection right now is with my Magician and GPRS. Pocket IE will not handle attachments on the forum (downloads the php-file). Could they be downloaded in any other way or could someone upload the cab-files to the ftp? Please..
EDIT: Of course I found the files on the ftp and succesfully downloaded them with resco. Sorry, should have looked better. Even so it is quite irritating that attachment downloading is not working with Pocket IE
hrb said:
Use CAB-Installer. With that, you can choose where to install.
Cheers.
Hans
Click to expand...
Click to collapse
I tried that.. but if the path is an hardcoded default in de cab, cab-installer uses that default
Also, i do not see the programs of the extended rom (when i install them myself) in my 'remove programs'-list.
crisscross said:
Will ask one more time: I am on holiday so my only internet-connection right now is with my Magician and GPRS. Pocket IE will not handle attachments on the forum (downloads the php-file). Could they be downloaded in any other way or could someone upload the cab-files to the ftp? Please..
EDIT: Of course I found the files on the ftp and succesfully downloaded them with resco. Sorry, should have looked better. Even so it is quite irritating that attachment downloading is not working with Pocket IE
Click to expand...
Click to collapse
In fact, downloading works in PIE. Just download the file (it'll show as download.php, correct) and then rename it to whatever it should be with the extension that it's supposed to have. Alternatively, when trying to download via PIE, in a "Download" popup dialog tap "Change" and change the name of the file to what it is supposed to be. After your download is completed, use your file explorer to locate the file and change the extension of the file from .php to a correct one.
WARNING
I just installed that poxy T Mobile UXC T-Mobile RC23 and it just hard reset my bloody Jam.
ARRGHHH
ARGGGGGGGGGGGHHHHHHHHHHHHHHHHHHHHHHH
AAAAAAAAARRRRRRRRRGGGGGGGGGGGGGGGHHHHHHHHHHHHHHHH
In fact, downloading works in PIE. Just download the file (it'll show as download.php, correct) and then rename it to whatever it should be with the extension that it's supposed to have. Alternatively, when trying to download via PIE, in a "Download" popup dialog tap "Change" and change the name of the file to what it is supposed to be. After your download is completed, use your file explorer to locate the file and change the extension of the file from .php to a correct one.
Click to expand...
Click to collapse
Aha! Thnx very much for that info mata!
But how does this work?! If I want to install for instance the Camera Wizard to update my camera, where do I have to install it? I asume it has to overwrite the original camera app, or can I really put it everywhere I want? And to make it clear... does this hard reset your device?!

German and French Language Pack for English WM5

Hi folks,
I made a "German Language Pack" (cab), which makes some german features available. See below
I am also working on a french version but I do nt have the french dictionary file for spell checking (mssp2_fr.lex) nor a french table for áà,... (sym.txt). If anyone could pm it to me I would be happy to update the language pack. Until then spell checking and symbols are as original only...
How-To:
1. download zip-file and unzip
2. copy cab-file to PPC
3. execute cab-file.
4. Softreset device
More information on the changes to registry and the included files are in the enclosed inf-file.
This tool was written for the Wizard device, but as the only Wizard-specific things are the settings for the hardkeyboard there shouldn't be any complications with other devices running WM5.
If anyone has suggestions for improving my little tool I would be pleased, if you could tell me!!
Hades.
new version with autocomplete feature added.
Still working on softkeyboard... - any suggestions?
hi hades,
does your little localizer work with the new aku2-roms? i have a himalaya aka xda2 with tofclock's 2.01a64wwe rom which is aku2. thanks for any info.
peter
i cannot report for any Himalaya images as using a Wizard (i-mate ROM 2.16). But the little tool does nothing system-critical. It only adds a view files and changes some registry settings, which are pointing to these files or concerning language settings. Therefore it should work with any WM5-device and -ROM, without interfering with any other abilities. I guess the settings concerning the hardkeyboard will just be ignored if the device does not have one.
For further information on all actions taken by the tool, please have a look at the enclosed inf file.
Hope that helped!
Hades.
transcriber doesn't work any more
I've just installed your french language pack on my Dopod with the latest Dopod rom 2.15.13.27 WWE and the transcriber doesn't work any more not in French neither in English. I get the message: Une erreur est survenue lors du chargement du moteur de reconnaissance de fichier.dll Vérifiez le chemin et la quantité de mémoire disponible.
I've followed your instructions and installed it successfully but I then got the message that the program was meant for an older version of WM and that maybe it would not work.
Is there a way to uninstall it without messing with the registry? My problem is worsened by the fact I can't manage a hard reset. I tried everything holding down the power button with the stylus in the small hole, sometimes also holding down the camera button at the same time, sometimes with the device turned on and sometimes turned off. No way, impossible to hard reset! Please help me, and thank you anyway for your work. I was very excited and I am now very disappointed.
yes it's a good idea
thanks
sorry 'bout that. I wasn't able to test the french language pack myself. I have overlooked the file and cannot imagine why it shouldn't work as it is similiar to the german one which is working quite well. Information on the changed registry settings are in the enclosed inf-file.
But anyway you should be able to uninstall it with the WM5 built-in uninstall feature (Settings --> System --> remove(?) programs). Perform a softreset thereafter by long pressing the standby-button (not digging the reset hole!)
To Hard reset your device you have to press and hold the comm and voicedial buttons simultanously, then press the reset button (small hole) with your pen, while still holding the other two buttons for a while, until finally you are questioned if you wan to completly delte your device. You have to confirm by pressing the green button. Make sure you have a bakup - I'd recommend SPB Backup.
Well, once again sorry.
Hades.
Thank you again for your kind answer. Actually I had to reflash my rom cause I couldn't do any hard reset. I was stupid not to think of removing the program first, since I didn't think it was a "regular" program. You mention the comm and voice dial buttons as two different buttons but actually on my Dopod it's only one button. Did you mean then the power and voice dial together, which coud make sense and which I didn't try cause nothing like it is mentioned in the user guide. Do you think I could have got the problem with your program because I used the stylus in the hole to soft reset my device after installing the french package. It is the procedure mentioned in the user guide for soft reset, contrary to what you tell me now. Thanks again
oh ok - I was assuming you have a HTC Wizard (don't know the dopod model number). If it's not a Wizard I have no idea how to hardreset it. But I hope you're using WM5, for my little utility is for WM5 only.
If you do a soft-reset after a change of the registry using the reset-hole the changed settings may not be stored on your device. That is because the registry-file is not immediatly updated after the changes, but stored in a temporary space and later (who knows when!) written to the file. So if you reset it by hardware-button the changes are still in the temporary space and therefore gone after the reset. If you do the reset by using software-reset function (provided by e.g. SPB Pocket+ or magicbutton) or simply switch off the device using the standby-button, the temporary space is written to disk before shutting down. That's it.
À bientôt,
Hades.
P.S.: I updated the language pack, cause I found a minor difference to the german one. (Compare inf-file) But I can't tell, that that was the problem.
My Dopod is a 818Pro with WM5, so it's a Prophet and practically the same as a Wizard, as I've seen in the forum. What you say about soft reset is very interesting since I haven't seen it discussed very often in this forum and i searched it quite thoroughly. Have you tried removing your program through the regular WM5 procedure? You seem to imply that the registry was not changed after my soft resetting with the hardware button, but it seems strange to me since after resetting I got the french warning I mentioned in my first post, and it was the first ever message in french from my english speaking device! Some change had definitely occured in the registry or somewhere else. Thanks again
well. I tried to remove and it worked. Concerning your registry I don't know wether it was changed or not. Depends on many things, I think.
Sorry,
Hades.
I've just installed the German package on my Himalaya device with English AKU 3.2. It works Thank you Hades!
hello Hades77
Actually i successfull changed hardware keyboard but also spellcheck, dictionnary (i think even T9 but i'm not using it) and special characters to french and it's compliant with 3.2 rom(thanks faria). As i can see you package does not include those feature yet ... Are you interrested in getting those files and including them into you cab ?
thanks a lot!
Hello hedes,
i just installed your german cab! it seems to work perfect on my phone.
THANK YOU VERY MUCH FOR THIS, IT MAKES LIFE EAYSIER WITH WRITING WITH AN ENGLISH ROM
Hi,
Is there an spanish version for TyTN?.
Regards,
Taguapire.
Hi , i was wondering if there is way (something like a tutorial) that I can build my own language pack?
I have a Wizzard (Qtek 9100) with the original QTEK rom (in Greek) and I am trying to fit Faria's 3.2 ROM in my PPC but i Need Greek Language pack . Is there any way you can help me with that?
thanks in advance
new ROM
I tried to install your german language cab, but it doesn´t work. I got the new ROM from Faria ( http://forum.xda-developers.com/forumdisplay.php?f=259).
Now i donn´t know how to go on.....
Thanks for help

[100% Working] Changing the default language of Xperia X2 - takes you 5 minutes.

This message is now updated with a 100% working, and quick way of changing your language for the X2 device. I have now tested with 4 different languages (fi, en, se and de), and all worked. I also updated the cabs to report to the Update Software that the phone has an old versison. Now it does not compalin that the latest version is installed!
I have tested with these languages: GENERIC_FI, GENERIC_SE, GENERIC_UK and GENERIC_DE. The rest of the cabs are created with the same rules, so they should work to (if not, then please post here which cab does not work).
Before you upgrade, please write down the following info and fill it into the form on the download-page!! I really want this info.
I would like to know which all versions are out there, and how they are connected to the different ID:s and versions!
Code:
Software ID:
Software Version:
Customization ID:
Customization version:
Language Region:
Content version Software language:
In what country the phone is bought:
Otherwise i have to put a special form that requires everyone to fill in this info before you can proceed to download..
Just follow these steps
Get one of these cabs, and save it on yout SD-card (not phone, becaue you will erase the memory during this procedure!):
x2_generic_be.cab
x2_generic_cn.cab
x2_generic_cz.cab
x2_generic_de.cab
x2_generic_dk.cab
x2_generic_en.cab
x2_generic_es.cab
x2_generic_fi.cab
x2_generic_fr.cab
x2_generic_gr.cab
x2_generic_in.cab
x2_generic_it.cab
x2_generic_mea.cab
x2_generic_nl.cab
x2_generic_no.cab
x2_generic_pl.cab
x2_generic_pt.cab
x2_generic_ru.cab
x2_generic_se.cab
x2_generic_sg.cab
x2_generic_tw.cab
x2_generic_uk.cab
x2_sony_us.cab
x2_vodafone_es.cab
x2_polkomtel_pl.cab
Save the cab on your SD-card
Reset the memory of your phone (settings->Clear phone)
After the reboot, you have to align the screen. When finished, the phone starts to install cabs. NOW remove the battery (or press the reset-button on the back of the phone) so that the custom cabs wont get installed
Start the phone again. Now when you get a screen that asks you if you want to continut the installation process, click NO. The phone boots up to default windows mobile with no SE panels etc.
Now install the custom language-cab you downloaded to your SD-card earlier
Turn off the phone
Start the phone and keep the vol-down + power button down till you come tho the white SE screen.
Start the SE Update Software, pick your X2 and click next. Connect the phone to the USB-cable when the software asks you to do so.
After a while, the update-software informs that there is a new software-update available. Just hit next/continue and confirm that the phone's data will be erased.
There is NO need to remove any files on windows, The update software starts to automatically fetch the ROM that matches the installed custom-CAB
Now you notice that the update-software starts to download the new ROM (over 125Mb). If for some reason the upgrade does not start to install (eg. one case was with a demo X2 phone), then just let the phone complete the custom cab-installation It does a factory-reset before it resumes the install)
Below are the different language-versions available. I have not yet had time to create cabs for other languages, but if you need a specific language, then post to this thread a request so that i can create a custom cab for that language.
It would be nice if you would report to this thread if you succeed or not with this upgrade!
So, here is a list of available regions that i simply picked up from listigs of ROM:s To get the MR2-release, it has to have been released by SE...
Code:
Belgium - GENERIC_BE
Czech - GENERIC_CZ
Danish - GENERIC_DK
Dutch - GENERIC_NL
English (Generic) - GENERIC_EN
English (UK) - GENERIC_UK
Finnish - GENERIC_FI
French - GENERIC_FR
German - GENERIC_DE
Greek - GENERIC_GR
Indian - GENERIC_IN
Middle East - GENERIC_MEA
Polish - GENERIC_PL
Portuguese - GENERIC_PT
Russian - GENERIC_RU
Singapore - GENERIC_SG
Spanish - GENERIC_ES
Swedish - GENERIC_SE
Taiwan - GENERIC_TW
etc...
Needless to say that you do these tweaks on your own risk
There are two other files that go along with this, and i can confirm that it did not work for me.
ill see if i can get the other file names. but i belive there may be another thread floatinga round that has suggested this as well.
Do you mean this one?
http://forum.xda-developers.com/showpost.php?p=6522684&postcount=56
The second file contained a readme
12:00 pm 02/26/2010
DMS00758434 - set security policy 4109 (0x100d) to 3136
17:37 26.04.2010
DMS00485404 - move bing to bottom of the start menu
Click to expand...
Click to collapse
And then the the setup-file with the SecurityPolicy change (no clue what that does..)
... Continuing with issues from this thread:
http://forum.xda-developers.com/showthread.php?p=6637026
ikakoo said:
Here http://b.pix.ge/k/b98o1.png
Click to expand...
Click to collapse
I guess you are trying to install the russian version, right?
What you showed on the above screencapture is an Uk-version of the X2.
To figure out more precisely what went wrong, you need to confirm to me that you followed all steps i have explained in the first post of this thread.
i gave my phone back to the seller because it was prototype version of the x2
ikakoo said:
i gave my phone back to the seller because it was prototype version of the x2
Click to expand...
Click to collapse
I think that the hardware is the same, but with an old software.
Did you
Reset the phone
Cancel the installation of the cabs after aligning the screen?
Install the generic_ru cab?
I did this, and i had an russian x2 with the latest R3A software...
So my opinion is that you gave back a great phone!
.
yes i did like you but still was the same.
now i'm going to buy SE X10
ikakoo said:
yes i did like you but still was the same.
now i'm going to buy SE X10
Click to expand...
Click to collapse
I had a couple of times that the update did not work on the first time. What i did was that i rebooted the phone, and when it asked if i want to continue the cancelled update-process i answer yes. Now the phone asks you to accept a reset. After accepting, the phone reboots, and you are at stage one again when the phone asks you to align the screen. Again when finished, cancel the update-process by removing the battery.
Now install your generic_XX cab (download a fresh copy of it!).
Now reboot your phone at least one time. What you could do is paste the content of the following files (you can get to them via ActiveSync):
\windows\swVersionCust.txt
\windows\swvercust.txt
\windows\swVersionProduct.txt
hertell said:
I had a couple of times that the update did not work on the first time. What i did was that i rebooted the phone, and when it asked if i want to continue the cancelled update-process i answer yes. Now the phone asks you to accept a reset. After accepting, the phone reboots, and you are at stage one again when the phone asks you to align the screen. Again when finished, cancel the update-process by removing the battery.
Now install your generic_XX cab (download a fresh copy of it!).
Now reboot your phone at least one time. What you could do is paste the content of the following files (you can get to them via ActiveSync):
\windows\swVersionCust.txt
\windows\swvercust.txt
\windows\swVersionProduct.txt
Click to expand...
Click to collapse
Thank you for your solution, i think soft-reset after installing cab is mandatory.
All work as you describe, I've just flashed my X2 from English to Russian.
domestik said:
Thank you for your solution, i think soft-reset after installing cab is mandatory.
All work as you describe, I've just flashed my X2 from English to Russian.
Click to expand...
Click to collapse
Great to hear that this worked I have now for fun installed 5 different languages
Spanish Cab
Thank you for the amazing work.
Is posible get the spanish cab for the procedure ??
Regards,
Eric
thanks hertell
since we don't have SPL yet, I suggest this thread being stickyed
Some suggestions:
1.- a spanish CAB ??
2.- many users vahe tryed and tryed everything before with no success, which means their PC SEUS SOFTWARE IS ALREADY MARKED with their current I-wanna-get-rid-of language. this prevents the installation of a new language...
May I suggest you to include anohter step into your guide:
UNINSTALL SEUS FROM THE PC and reinstall it after the lang CAB has been installed
OR
delete folder C:\Program Files\Sony Ericsson\Update Service\db
gtrab said:
thanks hertell
since we don't have SPL yet, I suggest this thread being stickyed
Some suggestions:
1.- a spanish CAB ??
2.- many users vahe tryed and tryed everything before with no success, which means their PC SEUS SOFTWARE IS ALREADY MARKED with their current I-wanna-get-rid-of language. this prevents the installation of a new language...
May I suggest you to include anohter step into your guide:
UNINSTALL SEUS FROM THE PC and reinstall it after the lang CAB has been installed
OR
delete folder C:\Program Files\Sony Ericsson\Update Service\db
Click to expand...
Click to collapse
Regarding the re-installation of SEUS, or deleting the files, i say that that's pointless. I have not done that, and i can install any of my tested languages directly without having to every time download them... SEUS can even resume nicely uncomplete downloads!
I think that the Spanish language has not yet been released, but as soon that will be released, then i'll create a new cab for with spanish language.
There is one thing that puzzles me, and I would like to know a bit more about what they mean (This is an example from the GENERIC_UK rom):
Software Id: 1230-2799
Customization Id: 1231-4909
Customization Version: R22A
What do these values mean? I would apreciate if someone could explain me more in detail, and if someone could point me to a complete, then that would be even better!
If this is some kind of flavour of each specific language, then it's not a big deal for me to create a custom cab for each of these flavours.
I just added two Spanish cabs: Standard + Vodafone. With this you can change your language to Spanish. Currently there is no spanish MR2 release, but you should get the spanish previous version installed.
hi hertell can you upload this file:x2_generic_it.cab because i can't download it
mafo82 said:
hi hertell can you upload this file:x2_generic_it.cab because i can't download it
Click to expand...
Click to collapse
The file has been there all the time...
hertell said:
The file has been there all the time...
Click to expand...
Click to collapse
Man I just want to tell you that you have done an amazing job.
Thanks!!
Thank you!!
My phone is currently in Europe as i did not want to risk "bricking" it myself: better to blame someone else if it happens But you have some pretty clear instructions so if I were to do it myself, I dont think that I would have a problem.
I sent this as a link for a more experienced tech to follow and make the change from Czech to English.
Unfortunately I do not know the the answers to the questions that you recently posted on your first post in this thread but as soon as i get it back I can try to find out what I can: albeit it will already be too late because it would have been changed already.
Anyways thank you again so much for figuring this out. Dealing with SE is so frustrating: "you bought the phone in Slovakia therefore it is not meant to be used anywhere else." WHAAAAA??!?!?!? Darn SE... have some product support for once.
hi hertell,i try to change language to my xperia but every time it return vodafone spain.I try with generic_it and generic _es but seus upgrade evry time firmware vodafone
So, the same problem with "You phone already has the latest available software installed" with only button "Exit" in SEUS.
Trying all variants described there with no luck....

Value added installer help

Hey,
I've installed this value added installer and it changed my whole phone to arabic. How do I get it back to english?
well the only way to solve the problem is to install the whole rom.. i.e. rom in english.. if thats difficult you can live with two lnguages.. in programs go to multilingual support.. unclick disable multilingual support then set ur language to English with arabic support
'ken said:
Hey,
I've installed this value added installer and it changed my whole phone to arabic. How do I get it back to english?
Click to expand...
Click to collapse
Don't panic mate. You can still return some english parts of it but not all. Try this first:
1.) Go to the Settings tab (that's the last tab in the slider, far right after the footprints tab)
2.) Count 10 from the very top of the settings and click it.
3.) From there Choose the 1st menu and try to choose english from the 1st drop downlist.
If this doesn't help just try to download this stock rom:
http://shipped-roms.com/shipped/Leo...Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
or if that is not the stock rom that you are using try to search here:
http://shipped-roms.com/shipped/Leo/
That happened to me before, i have managed to put back some english parts but still it's irritating if you cant understand something that you are seeing on your phone. I have managed to restore my stock rom back then.
Hope this helps mate!
Goodluck. Let me know what happens. You can just reply to this thread or pm me, i'll be glad to help you.
i have downloaded the first link but it doesnt run on my htc hd2. the other link is an index... what am supposed to search for in that list?
well I've installed the value added installer and it did turn my phone to arabic,
disabling Arabic suuport means you're back to zero. however, you just need to change a few parts and all of the English interface will be back:
enable English with Arabic support from the multilingual support option, you'll find it in Misc in the settings tab, or in system in the winmo settings page (that's whn you click menu>all settings when you're in the settings tab).
now soft reset.
go to the settings tab again and choose locale and text > Regional. Personally I set it to UK because it's quite closer to what I use but if you want more advanced options, go again to winmo settings choose system and then regional, you'll be able ro maually adjust each value, even choose how the date will appear: Arabic, English names in Arabic, or plain English.
soft reset and you're good to go
hope that helps
note that the value added installer will be automatically installed whenever you hard reset, which means you'll have to do these all over again, a better idea is to install some of these backup programs which will restore the mobile to it's state at the time of the backup.

Categories

Resources