Hermes as Modem for a Mac??????? - 8525, TyTN, MDA Vario II, JasJam General

Hi
I have searched the site and have seen lots of problems with using a Hermes as a modem with a Mac.
I am POSITIVE I saw one posting SOMEWHERE before I purchased it that detailed how to get it working but I cannot find the damn post anywhere now.
It talked about running a 'modem' application before pairing the device and before trying to use the Hermes as a modem.
Can anyone help or point me in the direction of the post????
Many thanks.
Robin

The wiki is your firend....

Looked there but did not find the solution.
Will have another look!!!!!
Robin

Forget that.
FOUND IT.
Many thanks.
Robin

Related

unable to connect to uni's wifi

Hi guys,
whenever i try to connect my imate kjam (wizard,Qtek 9100,MDA Vario, O2 XDA Mini S, SPV M3000, Cingular 8125, T-Mobile MDA, Dopod 838, VPA compact II etc) to my university's wlan, my pda tells me that it is unable to resolve ip. Um perhaps it says unable to find ip, im not sure, i'll check again this arvo and return with my answer.
My uni claims that their system is pda compliant which makes me think that one of my connection settings are wrong.
Before you flame away, i have searched many many threads for this thread using keywords such as wifi, wlan, unable, ip etc, but was unable to find any solution that i havent tried already. Do feel free to offer your advice.
I have a g4 cid-locked wizard running wm6, though i have experimented with a few other roms, but they all offer the same problem.
If anybody has any suggestions i hope you feel free to flame away or kick me in the bum in the direction of where i might find a solution to this problem. If im lacking any info in this post then do feel free to remind me and i'll edit it later.
Thanks guys
problem solved.
How did you solve it?
bwesty said:
problem solved.
Click to expand...
Click to collapse
Just for the sake of learning, would you please tell the community what was causing the problem and how did you solve it?

is there a clear way to do things ?

hi all, this is my first post but have been viewing a while,
im not sure an upgrade is what i should be looking at and have never done this before,
to avoid bricking it i would like to ask a few questions if you can help that would be excellent,
1. i have a standard out of the box o2 xda orbit that i purchased from car phone (you know the shop) and it came unlocked to any network, its obviously running the o2 version of WM5, im using a vodafone sim and have followed various settings to try get my gprs/mms/internet working but just cant get anywhere,
will upgrading to a different rom help this.
2. what is the best rom out there for this phone and where can i get it
3. i seem to find the forums scattered with instruction i have searched and tried to compile some sort of understandable document but im reluctant to use it incase i have missed something in my search,
is there an easy to follow newbies guide out there, if so can you point me in the right direction,
i am on other forums for different things and im aware of the etiquate of asking for information thats already there, i have searched but i dont want to turn this phone into a brick just because in my search i have missed a step that i was not aware of in the first place,
i hope you can all understand why i have asked this question, some that have bricks might and others with the knowledge may not, lol, well dont those people,
all the best and i hope this will be a good start for me here,
Eddie

Hello there, Im new around here and was hoping for some friendly help?

Hello to everyone, A quick introduction - Im new to the PDA Place if you could call it that, I personally use a Nokia N95 at the moment, And just the other day managed to get hold of an o2 XDA Exec second hand. Unfortunatly for me the devices appears to be in chinese when turned on so as you are aware theirs is not exactly much I can do with it!
I am familiar with the flashing process on Symbian phones and have done it a few times, With this knowledge in mind I thought and assumed I would need to flash this XDA Exec to an english firmware, or ROM as it seems to be called around here. I have been reading through a few threads in regards to updating and have also tried to download a new update off the o2.xda website, But it seems to keep saying I have an incorrect IMEI Number even though I have entered the correct one by typing in *#06#
I found this forum and was hoping perhaps someone would be kind enough to help me in regards to the problem I am having. I believe this device has Windows Mobile 5 and have seen and heard that Windows Mobile 6 has been released. I assume you have to purchase this much like you have to purchase a new copy of windows for a PC. Is this correct?
I had a go at the flashing process, And downloaded this EXTROM Unlocker from a buzz site? I didnt know what to do with it as its a .cab file so I downloaded KDSkamal WM5 Ultimate edition and thought well if I can at least get it to english then its a starting point at least. I double clicked the file inside and went through the update process, Then it said that it was not designed for my device, And this is where I am upto because im lost with what to do now.
Any help, information and/or advice would be most appreciated.
Thanks in advance
Hi there, whenever you try to change the ROM of one of these new Windows CE devices (all those names are the "marketing geniuses" ideas, PocketPC, Windows CE, Windows Mobile), the device verifies that you are installing the "right" type of ROM for your device, as uncle Bill would say, you cannot put anything that you shouldn't suppose to, and by "suppose to" I mean anything that they don't want you to do, I think it's enough on politics.
Anyway, if you try to change the languaje of your ROM, the bootloader will not let you to do so, so we use an special (treatened) kind of upgrading tool.
It is normally inlcuded in the ROM.
If you read the wiki, you should be able to find the whole process, well explained, right now I just can't remember the exact name of this file (something like noIdUpgrade, MaIdUpgrade, or something like this), normally all our programming gurus supply it with the cooked ROMs.
I know how frustating it is at the begining (also considering that you know Symbian), but consider that these questions arise too many times and people get the idea that you come and ask the same question that literally have been answered thousands of times and you don't even want to make some research work.
Again, read the WiKi, it's the perfect place to start with your device, when you get to know some of the jargon, you'll begin to understand many of the things discussed here.
cheers and good luck
Thankyou for the reply, I shall indeed read the wiki. Since I posted that I managed to get hold of an o2 update ROM which I tried to install, as it was doing it where it says do not disconnect it came up with ERROR 101, and that the cable had been removed when it had not. I also tried again and the same thing, Now the PDA wont turn on at all. If I try to press the hard reset buttons it says press 0, but then does nothing. At the moment it seems to be stuck on the bootloader I think you people call it. And wont come out of it :-( looks like I broke it already
Ok, quick udate after alot of messing about and research I finally flashed it, Its now on the newest version of the o2 firmware. Though now its full of o2 rubbish. I tried to install this custom one I pointed a link to in a previous post but when installing it says its not designed for my country. I assume this is in line with your reply but I tried a search for that program and it turned up nothing.
vwrmic said:
Ok, quick udate after alot of messing about and research I finally flashed it, Its now on the newest version of the o2 firmware. Though now its full of o2 rubbish. I tried to install this custom one I pointed a link to in a previous post but when installing it says its not designed for my country. I assume this is in line with your reply but I tried a search for that program and it turned up nothing.
Click to expand...
Click to collapse
Yes, O2 is full of crap. Try this thread: http://forum.xda-developers.com/showthread.php?t=320116
As I suggested in it. KDSKamal's ROM is the best. Better than official ROMs. You can find links on how to upgrade in that thread too.
---
Hey i had exactly the same problem as you, just bought an O2 Xda Exec in China, and all in Chinese but now I changed my Chinese WM5 to the KDSKamal's ROM, it works perfectly, and it seems stable.
Excellent, Thanks for the replies! I had a good play with it last night web browsing and such, I must say its so much easier than a Nokia N95 I love the software and such on it, Now if only there was a PDA/Phone that had the specifications of an N95 that would be great! I know there is the HTC Tytn but that only has a 2MP Camera I believe.
Anyway I really am pleased I got it working thankyou to everyone.
Now I know the basic process I would like to take it a step further and upgrade to Windows Mobile 6. Is there a way of doing this? I assume I need to get hold of another ROM, I admit I had a look around and found some dead links I assume due to copyright issues with Microsoft but im not sure.
Another question I had, Was I was looking around games you can get games like Riven (Myst series) And Age Of Empires which look just like the PC Version! Wow im overwhelmed by all the stuff you can get. On some of the games I have been looking at it says you need a certain graphics chip or higher in your device, May I ask what is in the Xda Exec? And if its a 3D Graphics chip thats good at running games.
How would I find out if the device is unlocked? Just popping in a card and trying? As I have a contract with T-Mobile where I get free internet, So it might be worth using my T-Mobile sim card on it instead of on o2.
The case isnt in the greatest condition, The screen and keyboard are perfect but there are a few scratches and blemishes on the case of the PDA, Is there an easy way of changing this and buying a new one to swap it with? I know it involves taking the machine apart which im comfortable with doing, Preferably getting a non o2 one would be great.
I hear about the radio and such, Does this device have a radio built into it?
Also is there anywhere I could either purchase a copy or download a copy of the manual? Im not sure how this device actually turns off, It seems to just go into standby mode when I press the power button.
Other than that, Thankyou very much so far!
again check the wiki my friend.... all answers to your questions are already posted there...

JTAG for Himalaya

Can somebody please direct me to the link showing Himalayas JTAG points. Im really having a hard time locating it. Ive googled and searched the forums, Im just not lucky in finding it. The wiki does not show it either, it says to be continued. Pls help me. Thanks
Small Info:
Himalaya JTAG
First, thanks for the reply.
Yes I have seen the wiki, but if you will read the contents, it doesnt say anything other than, a dead xda is required to find the jtag points. also it described what jtag is, and that it has been found on other ipaq and the other device. But it does not show the jtag points, Not even a picture, of the pcb.. At least not for me, I dont see anything.
Any other leads? Can jtag be accessed by thru cradle connection? I really need to know this info. Thanks
Try to look for information about this topic
anyone else wanna share info?

Help Needed - I'm desperate!!!

Hello,
I desperately need some help.
My girlfriend bought a HTC Touch Dual from ebay which was locked to the Orange Network in the UK. I tried to unlock the phone for her so she could use her Vodafone SIM and have made a right mess! I used an eight-step process on one of the threads on this forum and got completley lost.
Firstly, I don't really know what I'm doing, and have no idea what a 'radio', 'rom', etc is. In fact, in reading these forums I realise how out of my depth I am.
Would somebody be able to help me out. Not necesarily with unlocking, but just getting the unit back to working order - i.e. so the cameras work, the sound works, the screen responds to my taps, the wireless card works, etc...
Please remember I know nothing about these machines, so you will need to use VERY simple explanation!!
Thank you in advance,
Gary
Problem Solved
Thanks to Poetryrocksalot for helping to solve my PDA problem...
He gave up alot of his time, and perservered with my lack of knowledge - Top guy!
Thanks to all others who made suggestions, guidance and encouragement.
Best wishes,
Gary

Categories

Resources