Database Users

GPRS Problems with american t-mobile Phone Edition

Hi
I bought an american 900/1900 Phone Edition Pocket PC and I would like to use it in Switzerland. With Version 3.14.40 and Radio Stack 6.18 it wont connect to GPRS (even the GPRS "G"-Sign wont appear). I was connected once, but after the next reset it is not working anymore. With older version of this Phone (3.08.10/6.02) it's working perfectly! Does somebody knows this problem? Or should I downgrade to the working version 3.08.10? :?
thanks

GPRS Problem After Upgrade

Dear Sir,
My Name Ahmed Kadry, I'm Chief Technical Officer for GoodNews4me, I did upgrade to my 32MB O2 through the web site http://www.myxda.com "RUU_CEv31417wwe_O2-Asia_C1204.exe " and "RSU(GPRS_416_ENG_O2).exe", and after doing the upgrade I'm facing problems with GPRS connection and the telephone as well, The problem is when I connect through GPRS for the first time it works but after disconnecting from the GPRS and try to reconnect again it fails plus if any one tries to call me after disconnecting, my mobile become out of service. It only works if I switched my phone off and then on again, I checked with Vodafone our network operator here in Cairo Egypt, the technical people said it is O2 Problem.
I have tried to use another O2 without being upgraded it works fine, it will be highly appreciated if you could advise on the subject, or how can I go back to my original ROM without upgrade for both files
My current O2 Info is:
IMEI: 350312010540248
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.16
Protocol: 32S54

Mmmm.
I've had this as well. I'd be keen to find out a work around.
Cheers!
Simon.

Me too
Me and two of my friends are facing the exact same problem with GPRS connection after the upgrade, couldn't figure out a solution till now.
Thanks for sharing :shock:

hi all,
i think the only solution for this problem is to downgrade your RUU to 3.14.13, i faced the same problem before with asian upgrade !
after downgrade every thing is fine even battery life became better
best regards

The soultion is there
The solution is to uogarde to 4.17 it is avilable now on the following sit
www.myxda.com. It works perfect

Re: The soultion is there
abuseif said:
The solution is to uogarde to 4.17 it is avilable now on the following sit
www.myxda.com. It works perfect
Click to expand...
Click to collapse
May you send me the RUU and RSU file via Email? Or give me an other address to download it.
It's because my XDA have a IMEI that isn't allowed to download.... :-(
You can use my email: [email protected]
Regards
Stefan

or u can upgrade to the 3.19 version..
tried and tested

UAE: Best Radio version?

First of all, I'd like to thank everyone who posts to this forum - I've been reading it for a month or so now and am constantly impressed with the quality of the knowledge here, especially the developers...
I have a QTEK 1010 bought here in Dubai, UAE, with the following device info:
ROM version: 4.00.01 ENG
ROM date: 05/16/03
Radio version: 3.23.01
Protocol version: 32S54
I have found that browsing using IE feels slower, and have the feeling that this version of the ROM does not work well with the radio version. Does anyone reading this forum live in the UAE? I'd like to upgrade the Radio, but need to know which version works best with Etisalat (our Telco).
Any comments much appreciated!
Thanks, Doms...
P.S. I'm going to upgrade the ROM to 4.00.05 when I get the opportunity

hi, i am from dubai and i am using 4.00.1 from t-mobile and 4.21 from o2, so far everything fine just when i reset the t-mobile logo appears.
do you have bluetooth option in that version and your version was already installed or you upgraded yourself?

Use the o2 Radio Version 4.21 it will work fine...

Thanks for the responses guys. Does this new radio version provide any benefits over the one I have?
kamiar said:
hi, i am from dubai and i am using 4.00.1 from t-mobile and 4.21 from o2, so far everything fine just when i reset the t-mobile logo appears.
do you have bluetooth option in that version and your version was already installed or you upgraded yourself?
Click to expand...
Click to collapse
1) The QTEK does not support Bluetooth, and there is no way to make it work on a QTEK either.
2) There is no Bluetooth option in any of my menus or settings (I would expect this as my device does not support Bluetooth). Windows PPC2003 is supposed to be able to support Bluetooth, however: http://www.microsoft.com/windowsmobile/products/pocketpc/about/2003/bluetooth.mspx
3) I upgraded to the 4.00.05 version of Windows PPC2003 myself using Jeff's ROM Kitchen (thanks Jeff!) http://cuba.calyx.nl/~jsummers/ROMkitchen/

Hi, Once i had 4.00.01 and in connection setting i had Bluetooth option but ofcourse it was not working, the other thing is do you know any camera work with SD port of Qtek? i mean something availble in the market.
4.21 is more stable i think.
cheers,

I had some problems when making calls on my QTEK yesterday. While in a voice conversation audible clicking noises can be heard and after about 1 minute of conversation the quality of the call deteriorates until the other party cannot hear me. I'll try upgrading the radio...
I don't know about the camera support using the SD slot in the QTEK. My first instinct would be to say no, it's not possible, but I can't confirm that...

I bought a Qtek 1010 in Dubai Duty Free the other week. I've since upgraded the ROM using ROMkitchen and am delighted with it. One thing I did notice though is that the speakerphone functionality (claimed in the Qtek handbook) doesn't seem to work. I didn't try it before I upgraded so can someone tell me if it works with the native UAE ROM code, and if so does anyone have any idea how I could get it working again?
David

I own a QTEK in the UAE and here is my share to those asking about OS and Radio updates here:
I upgraded from
ROM version: SER 1.2
Radio version: 3.23.01
To
ROM version: 4.00.10 ENG (T.Mobile Test)
Radio version: 4.21.00 (O2 UK)
Everyting seems to work fine apart from 2 minor issues so far:
Make sure you set your band to 900Europe as the default is 1900North America in phone/tools/options
The signal fades out sometimes but doznt affect the reception
No G signal but GPRS is OK.
GPRS stays connected; have to turn phone off and on to disconnect.
Advice:
Read a lot before you upgrade. This forum has a wealth of information.
Cheers
ridaz

Blackberry connect for wizad

I have an i-mate K-JAM and need to get the t-mobile blackberry client working to access corporate email. I upgade my ROM to following:-
ROM ver 2.16.9.1 WWE
ROM date 2/6/06
Radio ver 02.07.10
Protocol ver 413.1.03
ExtROM ver 2.16.9.101
Installed Blackberry client and desktop with no problems but client will not connect. I could not install the t-mobile ROm as I has an Invalid Vendor ID message.
Any suggestions how I might get it to work, I have heard that the t-mobile client is incompatible with ROM ver 2.0, but also understand I cannot now load a lower ROM version.

Dude, I hate to bring down the rain on your head but if you look in this forum you will find an extensive thread on BB Connect for the Wizard. I'd suggest reading it - first off it doesn't work with AKU2 ROMs so you're on a hiding to nothing unless you downgrade. Second, the reast is in the thread.

Sorry for being a novis, but we need to start somewhere! According to the I-mate Club website once the ROM has been updated to AKU02 it cannot be reinstalled with older version. Any assistance/clarification very welcome.

shiskinegolf - imate club don't know what they're on about mate. Read the lokiwiz thread on this forum at the beginning and it will tell you how to SIM and CID unlock your unit. I'd also recommend reading the last three pages or so of discussion which takes you through the issues we were having unlocking AKU2 ROMS - there is a trick to it but I understand lokiwiz has been updated to make it work since we were using the get around. Once you have SuperCID unlocked you can install any ROM you like (that includes downgrading to an AKU1).

Blackberry Connect Software for D810

Currently I am using ROM version 1.23.751.8 from Dopod Taiwan (CHT9100). This is the update after the one that enabled GPS. However, ever since I upgraded to this ROM version Blackberry Connect stopped working. I have tried .16, .52, and .54 version of Blackberry Connect software but none worked.
I read somewhere that it needs to match specific AKU version. I am guessing the ROM I use is a AKU version (OS 5.1.465, Build 15673.3.3.1) newer than .54 version of Blackberry Connect can work with.
I was able to find mention of Blackberry Connect officially endorse on Dopod's Asia site. However, since I don't have a device from Dopod Asia, I am unable to download Blackberry Connect software for D810.
Can someone upload it?

Hi,
I need the same.
Someone could provide it?
Thanks in advance.

Check out http://forum.xda-developers.com/showthread.php?t=294218

I read that thread by cornholio - that's how I figure I needed a "matching" Blackberry Connect version.
I am not daring enough to perform the hack mentioned in that particular thread in fear of messing up and brick my Trinity.
I was hoping to try the one Dopod put on their web site. My thought is that if Dopod puts on the web site, it must work find with the latest ROM version without the need to perform that hack mentioned above.
I hope RIM release a new version of the software. Otherwise I'll have to bite the bullet and cancel my Blackberry subscription. I am currently running Direct Push and it works as good as RIM's push mails. Besides, if I can't wait anylong, I can cancel Blackberry service and save me $5 per month on Cingular.