My X01HT was unlocked and working with English ROM. But now, when I connect to internet by Softbank 3G as before, I cannot find out how to disconnect it. When it used Japanese ROM, I just click on the connected icon and use disconnect button! Can anyone tell me how to do, thank you!
Would you try to add registry key as follows,
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Flags2"=dword:00000010
I you want more information of registry, you have to check here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
riki0081
press the hangup (red key) button for 5 seconds.
POF
CAUTION HTC Hermes users: the wiki may be hazardous to your health.
Reading before posting can lead to blood circulation disorders and causes impotence.
I was wondering what my problem was!!!! XDA-Developers solves another Hardware problem!!
Mike
riki0081 said:
Would you try to add registry key as follows,
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Flags2"=dword:00000010
I you want more information of registry, you have to check here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
riki0081
Click to expand...
Click to collapse
Thank so much, it's done!
In my case, I WANTto disable having my 3G/GPRS connection disconnected whenever I press the "End" button.
Sometimes, I am downloading date and a call comes in. I hang up the call, and the 3G/GPRS connection is gone. Anyway to do this?
Related
Hi,
my GPRS connection is working, it connects without any problem but when i try to navigate with PIE then I can see the message "Opening" on the left lower corner but it just stays that way for a long time and the page never gets displayed. My e-mail works fine so that means i have GPRS connection and working. If i try navigating to a WAP site some pages get displayed and some other don't. If i connect via WiFi or via activesync then i can navigate without any problems. Based on my observations I suspect a problem with the MRU (Maximum receive Unit) of the TCPiP stack but i can not find on the registry where to change that.
Hope someone can help.
I used Tweak2K2 to set it in mine. Sorry I do not know the Reg setting.
hguiraud said:
Hi,
my GPRS connection is working, it connects without any problem but when i try to navigate with PIE then I can see the message "Opening" on the left lower corner but it just stays that way for a long time and the page never gets displayed. My e-mail works fine so that means i have GPRS connection and working. If i try navigating to a WAP site some pages get displayed and some other don't. If i connect via WiFi or via activesync then i can navigate without any problems. Based on my observations I suspect a problem with the MRU (Maximum receive Unit) of the TCPiP stack but i can not find on the registry where to change that.
Hope someone can help.
Click to expand...
Click to collapse
I wonder whether your HTTP proxy port number is correct. I had same problem and I was using the advertised port number until I discovered there was another one that actually worked. I would suggest a port number but I'm O2 UK (it was `advertised as 80 but only actually worked on PIE with 8080)
Mike
You are not alone
Please check the following threads, both are related to our problem, unfortunely none of them gives a solution.
http://forum.xda-developers.com/showthread.php?t=286449
http://forum.xda-developers.com/showthread.php?t=287101
My GPRS connection doesn´t require an HTTP proxy server so Mike´s suggestion didn´t work for me. I contacted Movistar and they are not open to give support since I didn´t buy the device from them....
On the other hand, if somebody can provide the ROM reg settings and a brief instruction on how can be changed would be great
Hi Luiggi
Sorry you have not got it solved yet. I remembered your post and looked for it but did not find it - hoped you had a solution to offer - sadly not
Edit: I suppose you are certain about the proxy? I ask because mine will connect to GPRS just fine without it - BUT PIE does not unless it's set.
Mike
Maybe it is a Movistar problem
Interesting, so happens that my service provider is also Movistar; maybe they have done something different to their network settings. Any way, I was in the US recently and was able to use GPRS roaming although because the TyTN does not differentiates between GPRS and EDGE it could have been that it was using EDGE and that it why i could navigate using PIE.
The funny thing about this problem is that my e-mail works fine and my SPB whether also updates without problems, it is only the navigation with PIE that i have issues with. Based on my observations it seems to be that if the tcp packet is larger that a certain size it gets dropped by the tcp stack.
Not lucky so far
Hi Mike!
Movistar people told me that the don´t need proxy servers for the connections since they use Dynamic IP addresses (?). I´ve have tried a lot of different configurations but not luck so far, the comment posted above could be they key, now the big question is: What are the proper settings and how to modify the reg...?
Will reflashing the phone be the only solution?
Well looks like the options are narrowing down to reflashing the phone.... I'll give it a couple of days more to see if someone can give Us a hint on what to do.
hguiraud said:
Well looks like the options are narrowing down to reflashing the phone.... I'll give it a couple of days more to see if someone can give Us a hint on what to do.
Click to expand...
Click to collapse
I´m not sure about reflashing, actually I have two 8525 I paid to SIM unlock the 1st one so I still have the original ROM 1.34.505.1 and the symptoms are the same, I don´t know what ROM would be suitable to "solve" the problem in case this would be causing the partial lock.
New Finding
I´ve been trying a lot of things and I guess I´m close to the root cause. I strated from scratch with a hard reset and giving a soft reset before the 3 sec secreen of auto configuration, then I tried to set a connection in my ISP, I named it "The Internet" and when I hit the OK button I got a message saying that there was an existing connection setting under the same name!!! I couldn´t find such connection, so I´m pretty sure that the connection is hidden somewhere in the ROM and we need to disable it and create a new one or modify the reg to address a different connection consistent with our own network.... Any thoughts on this?
luiggi said:
I´ve been trying a lot of things and I guess I´m close to the root cause. I strated from scratch with a hard reset and giving a soft reset before the 3 sec secreen of auto configuration, then I tried to set a connection in my ISP, I named it "The Internet" and when I hit the OK button I got a message saying that there was an existing connection setting under the same name!!! I couldn´t find such connection, so I´m pretty sure that the connection is hidden somewhere in the ROM and we need to disable it and create a new one or modify the reg to address a different connection consistent with our own network.... Any thoughts on this?
Click to expand...
Click to collapse
I do have exactly the same problem: an MMS connection is missing but stored somewhere... Anyway to figure out where it is? To me, it's just a flag to change in order for it to re-appear in the \connection\connections tab...
MMS in Cingular
Jeff_mm said:
I do have exactly the same problem: an MMS connection is missing but stored somewhere... Anyway to figure out where it is? To me, it's just a flag to change in order for it to re-appear in the \connection\connections tab...
Click to expand...
Click to collapse
I mapped that one in Cingular, the MMS settings are self extracted from the extended ROM, if you want to get rid of it just do a hard reset and then a soft reset when the 3 sec message shows up, hope this can help you
Please tell us how you did it....
jcb_home said:
I used Tweak2K2 to set it in mine. Sorry I do not know the Reg setting.
Click to expand...
Click to collapse
Yesterday I took a look the the various reg entries and there are some which set default addresses, did you change those addresses? How did you do with Tweak2k2?
8525 on SALE
hguiraud said:
Hi,
my GPRS connection is working, it connects without any problem but when i try to navigate with PIE then I can see the message "Opening" on the left lower corner but it just stays that way for a long time and the page never gets displayed. My e-mail works fine so that means i have GPRS connection and working. If i try navigating to a WAP site some pages get displayed and some other don't. If i connect via WiFi or via activesync then i can navigate without any problems. Based on my observations I suspect a problem with the MRU (Maximum receive Unit) of the TCPiP stack but i can not find on the registry where to change that.
Hope someone can help.
Click to expand...
Click to collapse
I went thru all regs and I couldn´t find MRU or LCP (Link Control Protocol) settings, what disturbes me more is that I put my SIM in my 8125 and everything (IE. messenger, Gmail, Hotmail, etc.) works wonderful!! I think I´ll put on sale my 8525.......
More findings
I do have GPRS connection, no doubt about it. I install Tonaya Iper in my phone and the software gives the ability to trace the route from my phone to the destination, for instance The route to www.gmail.com (216.239.63.19)
is as follows (I set the time [email protected]):
1.- 10.15.14.78
2.- 10.2.4.20
3.- 10.2.4.134
4.- 200.36.174.81
5.- 200.39.31.42 (mx-mesr-rt1.telefonica-data.com.mx)
6.- 213.140.50.233 (So-2-3-1-grtmtyma2.red.telefonica-wholesale.net
7.- Request timed out
8.- 213.140.43.25
9.- 213.140.43.225
10.- 213.140.36.45
11.- 213.140.37.57
12.- 64.233.123
13.- 66.249.94.8
14.- 72.14.233.123
15.- 71.14.233.123
16.- 216.239.63.19 (bp-in-f19.google.com)
When I try to trace the communication with a 1 second timeout the phone stalls for a while in server 213.140.50.233 and makes the traceability extremely slow.
My conclusión is that when the communication reach the server 213.140.50.233 this cause a delay and my phone can not continue to the final destination probably because the pre set delay in the application exceeds its timout parameter.
Any suggestions?
Not a "Maybe" MOVISTAR is guilty for poor GPRS connections!!
hguiraud said:
Interesting, so happens that my service provider is also Movistar; maybe they have done something different to their network settings. Any way, I was in the US recently and was able to use GPRS roaming although because the TyTN does not differentiates between GPRS and EDGE it could have been that it was using EDGE and that it why i could navigate using PIE.
The funny thing about this problem is that my e-mail works fine and my SPB whether also updates without problems, it is only the navigation with PIE that i have issues with. Based on my observations it seems to be that if the tcp packet is larger that a certain size it gets dropped by the tcp stack.
Click to expand...
Click to collapse
Today I use a SIM from the other mexican cell company (telcel), I just enter APN, user name and password and in a blink my 8525 flew thru PIE, hotmail, MS messenger, Gmail and everything!!! Conclusion:Movistar system or set ups are causing all the connection problems, I´ve spent hours in the phone with their wonderful engineers and none of them has been able to explain why Movistar can´t give a decent service to 8525 users.
Using the Traceroute feature of IPer I notice a very long delay to ping the Movistar router located in Madrid (213.140.50.233), there´s where I think the problem is.
You are right Luiggi...!
One of the guys here at the office also has a Dopod 838pro (I'm ussing a HTC TyTN) but with Telcel instead of Movistar...the push e-mail capabilities and the internet surf are really very good ...but with the GPRS of Movistar I recive my e-mails very delayed in the phone and also still unable to sing in to MSN messenger.
Thanks to your post now I know the trut; I was really thinking that maybe the TyTN was the problem (I mean, the HTC branded because the Dopod was functioning just very fine) I was even thinking in return it...
regards
Hummm I suspected that....
Well I think we have (a winner) an answer (partially), I will go back to Movistar and complain, I may not get any results from it but I really have no options since because of my work I travel a lot and the roaming pricing I get with them is way better that the other alternative. The funny thing about this issue is that other HTC phones do not have it. A co worker has a Wizard and he can navigate with PIE. Maybe it would be interesting to investigate what could be the difference or why other phones can navigate and Tytn can't.
Wizard works great!
hguiraud said:
Well I think we have (a winner) an answer (partially), I will go back to Movistar and complain, I may not get any results from it but I really have no options since because of my work I travel a lot and the roaming pricing I get with them is way better that the other alternative. The funny thing about this issue is that other HTC phones do not have it. A co worker has a Wizard and he can navigate with PIE. Maybe it would be interesting to investigate what could be the difference or why other phones can navigate and Tytn can't.
Click to expand...
Click to collapse
I do my living buying and selling phones and I guess next time (tomorrow) I get a Wizard for sale I´ll spend enough time going thru the registry and routes to compare it with the Hermes. Would you guys mind to run IPer and check if the afore mentioned router or server with the problem is common for all of us?
I already wrote a not very nice letter to Movistar, probably they are shocked because normally their tournaround time for an answer is less than 24hrs and this time is taking longer. Next letter I´m going to be addressing the Director or whoever is the top dog.
How do I get/ run the aplication mentioned???
I would like to help to figure out what the problem is or help you guys to get to a solution...so, where can I find and how do I use the software luiggi is mentioning??
Is it free or with a trial version???
regards
I have not been able to turn on wifi reliably for ages now - It all started when I upgraded to WM5. Now (even if I downgrade to wm2003se) I cannot turn it on. I press the wifi on button, the cursor comes up but nothing happens), leave it for a couple of hours, and then press again - it will sometimes turn on. It then stays on for about 30 mins, and turns off (I have the wifi set to never turn off).
I cannot diagnose the problem - can you?
Any help GREATLY appreciated - feel free to ask for more details.
hardint0110
What you can do is to check the following keys in the registry:
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Both dword with decimal values. Next, when you made the changes, softreset and check if your wlan is working.
Keep us posted.
Cheers.
TheWizzard2203 said:
What you can do is to check the following keys in the registry:
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Both dword with decimal values. Next, when you made the changes, softreset and check if your wlan is working.
Keep us posted.
Cheers.
Click to expand...
Click to collapse
Dont seem to have the directory Tnetwln1
I am using a Blue Angel with xplode wm5 AKU 3.5.2 rom kitchen 2
i do have a directory called tiacwln1, and another called tiacwln.
I have attached them here, so you can have a look yourself:
(rename .doc to .reg if you need to)
Thought I had some progress there, but now all is back to normal...
Still no luck... found this: http://www.teksoftco.com/forum/viewtopic.php?t=194
but it wont turn WiFi on and off.
WIFI does not run on Wizard
I have not been able to turn on wifi reliably for ages now
I press the wifi on button, the cursor comes up but nothing happens), it will sometimes turn on. It then stays on for about 1 - 5 seconds, and shows connecting BUT DOES NOT CONNECT and turns off (I have the wifi set to never turn off).
I cannot diagnose the problem - can you?
Any help GREATLY appreciated - feel free to ask for more details.
Copied a part of the Message from the ORIGINAL THREAD
Thanx In advance
-jeasbe'
Thank you
The registry jack worked 4 me i don't know how to thank you really you helpde me a lot
No Luck..Need to USE THIS URGENT
I tried it but on Reboot My settings return back from
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
RETURNS BACK to
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 0
___________________________________________
The other setting
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Stays same
And after that, have you tried to soft-reset the device ?
There's a good change if don't, the change won't have any effect just like on you're desktop/laptop etc.
No Luck
Stevos said:
And after that, have you tried to soft-reset the device ?
There's a good change if don't, the change won't have any effect just like on you're desktop/laptop etc.
Click to expand...
Click to collapse
Of course, That's what I said that "I tried it but on Reboot My settings return back "
After the Reboot/ ie after the Soft reset.
No Luck
I have the same problem.
the value change back to 0 after soft-reset.
I tried several times even waiting for some minutes before soft-resetting.
So it means ??
NO LUCK ??
~smile~
@jeasbe: I just wanted to second your finding...
Actually I suspect some hardware/EEPROM issue like this (Hermes):
http://forum.xda-developers.com/showthread.php?t=304004
this is my story:
1. Got the Dopod from the provider with Chinese ROM (living in mainland China at the moment). Did not test WiFi.
2. After strongly insisting on an English GUI I got an update to an English ROM from the provider. Since then no WiFi
3. Asked the provider about WiFi on my Dopod. He confirmed that it was not working but had been working with the Chinese ROM before.
.... (so excluded user problem but still no solution)
4. Decided to upgrade by myself assuming the problem lies in the ROM version.
.... Upgraded step-by-step with the various ROM versions to XM6 according to tutorial 'n checked for each ROM version for WiFi. Still no WiFi.
5. Installed the WiFi patch for the commgr. No WiFi.
6. Read about that registry hack. Values do not remain after soft-reset. No WiFi.
7. Colleagues have the same problem (but still with the English ROM from the provider). So will ask one of them to hand-in to the provider to change back to Chinese ROM in order to see whether WiFi is working with that setting. But doubting it
8. any other ideas appreciated ...
another thread with similar issue:
http://forum.xda-developers.com/showthread.php?t=296936
It looks like the Hermes guys (Drummer) found a solution:
http://forum.xda-developers.com/showthread.php?t=322225
However, I am not an expert so don't whether it is possible the adapt the approach somehow to the Wizard.
any news here? ive got exactly the same problem
bug-i said:
any news here? ive got exactly the same problem
Click to expand...
Click to collapse
I found out that if you have a CHS version officially sold in China there is no WiFi feature in the phone - this rule applies for all models from any manufacturer.
I am not sure though whether it is really hardware (like missing the WLAN chip) or software issue (on a level below the ROM, because change to different ROM [incl. change of IPL/SPL and radio] won't help).
Hi all,
I managed to get hold of a very reasonable priced sim free xda mini s and aim to use it with my Vodafone sim. The text and phone services worked immediately, and i followed these instructions to get the gprs/internet/mms settings:
http://www.expansys.com/ft.aspx?i=124833&thread=29
They seemed to have worked a charm, and access to the net and mms sending tests have all worked (apart from I don't go directly to the vodafone live screen now when i connect - it goes to a Microsoft hold page)
The only problem I'm finding is that when i disconnect from a gprs internet connection, or after sending a mms, the phone does not drop the gprs connection as you would expect a usual handset.
Is this normal, and will i always have to switch it off manually after each connection, or have i botched a setting somewhere?
Thanks to you all in advance for any help you can give,
Mike
PS: Weird getting used to no finger texting!
Try Zoki's NBD v7.3 ROM.
I was having the same problem as you, but have flashed with this new ROM today & the GPRS appears to auto disconnect after a MMS has been sent.
Find the ROM HERE
Hi, and thanks
I have no idea just yet, how i would go about changing the ROM, but for futue reference - great!
Thanks again,
Mike
i think you can disconnect from gprs or edge by holding the "END" button down, well atleast that works for me
You might like to try a registry tweak application like RegistryWizard or Tweak2K2.NET. You should find these have options for GPRS connectivity.
Unless you absolutely 100% want to install a new ROM and understand the risks and implications I recommend against installing a new ROM for a simple usability fix. Custom ROMs tend to have their fair share of problems themselves.
Hello,
im new on this forum and like it.
I search for set the power save mode in wifi adapter on my LG KS20. When the screen light off (after 2 minutes) my wifi connection is lost.
Any Expert know how to do this?
Found this in the kaisertweak topic.
http://forum.xda-developers.com/showpost.php?p=1677643&postcount=367
But I think the GUID is different on each type of device.
Ok thanks my problem is solved!!!
I'm sure this way can keep wi-fi alive. But Voip (SIP) program still not work well.
I hope the SIP still a alive,like GSM, that I can receive/dial Extention number.
anybody can solve it? thank a lot !!
Krypt said:
Found this in the kaisertweak topic.
http://forum.xda-developers.com/showpost.php?p=1677643&postcount=367
But I think the GUID is different on each type of device.
Click to expand...
Click to collapse
My phone preconfigures a network when I enter a sim card. The sim setting would be correct for my provider, but I have my own network settings combining corporate and provider settings. The phone however kicks them out every time I start it up.
I just want to kick this wizard out, but HOW?!?! Can't find it in the registry etc.
You could try unlocking the extended rom and then deleting the carrier.pxp file that is in there. That would stop *any* configuration I think - but htat might be more of a nuisance if you end up roaming.
(This is a GSM-specific answer by the way. Don't know about CDMA)
John
Solved the issue by going into the registry. If I can't edit the wizard, I can at least kill it's configuration. Just look for the setup the wizard suggests and edit it to the right settings.
Could you tell me how you got that wizard disabled? You said, that you've bee in the registry. What keys are there to change?
disable connection setup
I had the same problem as well, and seeming there seemed to be no answer thought I'ld post where the keys were on my phone (HTC 3600i) this will be different for the palm but might give someone a starting point
HKCU\Software\HTC\Connectionsetup
On the HTC there are several keys that seem to relate to auto start and auto detect, I set them all to 0 and haven't had another problem.
Also just try searching the registry for connectionsetup thats how i found it.
a