Database Users

Registry setting for JASJAR after ROM update

I have just installed the new English ROM on my JASJAR, without any problems. However, when re-installing all my apps, WM5 asks me whether I want to allow the unsigned app from installing for everything.
Can somebody please tell me where to find a registry setting to disable this, otherwise I am going to be crazy by the end of the day!
:roll:

[HKLM\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1
Do a soft reset.

Thank you very much
Now that installing Calligrapher 8.0 to my SD card caused the phone to refuse to boot, I'm going to have to start all over again ... :x

This hack also solves the "VGA Brute force not working after the update" problem...

Help with trusted certificates on WM5?

Could someone please help?
I have an XDA Exec (HTC UNIVERSAL) Ive been searching for days to a solution for this without avail and you guys seem to know what your talking about! Im very new to this and need a solution to this error when i try to install some applications and run them:
" X cannot be opened. Either it is not
signed with a trusted certificate, or one of its components cannot be
found "
Is there any way you can disable this in WM5? my WM5 version is OS 5.1.1700 (Build 14354.0.1.1)
Or is there any way whatsoever you can get around this? please if anyone can help do let me know and post!!
Thankyou !!

Is your phone locked ?
It may be locked or your operator prevent installing all of 3d party applications. In this case reinstalling "clean" WM5 may help (I'm not sure though) - I'm only a newbie in WM5.
Another reason that application you run trying access trusted functions - like allocation of the physical memory. In this case I'm not sure what can be done - reinstallation of WM5 will not help.

Its unlocked! so if i re-install wm5 it wont say this when i install programs? i have tried resetting the phone and installing different roms but nothing works! is there any particular rom i should be looking to install? or anything i can put in the extended rom to install after a hard reset to sort this out? PLZ HELP!

I have had that problem, too and I was going crazy. Then I tried the following tweak but I do not really know why it should work, it just did:
in HKLM\System\ObjectStore is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON.
Subsequent reboots can be done with reset button then. :lol:
there is another tweak that gets rid of the warning messages, but I did not use that one

really! which software could i use to reboot the phone??

also is resco registry okay to view and change this? it says registry type 0x0 (1) i have now changed it to 0x0 (0) is this correct? i performed a soft reset but im stil getting the error message! is this because i need to use software to reboot?

yep, the first soft reboot needs to be done with software. After that you can use the usual way again.
After I had done this I removed all "problem apps" and then reinstalled them and it worked.

What software did you use or could i use to reboot my ppc chuckchuck?

How to group cabs in one cab?

Is possible to group several cabs in one cab?
I want it to save in the Extended Rom of my TyTn, so that when I do a HardReset, automatic it starts to install all the modifications of registry and some programs that I have in several cabs from the pocket, without need of pc.
I search on the forum, but I don´t find any solution.
Thanks

Well first off, if you use the autorun.exe that already exists in the extended ROM and modify its configuration file (the name may be different for different devices, but it is usually a plain text file) you can get it to install several cabs in sequence.
Combining cabs is not always possible unless you are the one who created them in the first place.
Get a program called CE Cab Manager. It will show you everything that a given cab includes and let you edit it. As long as it's just files and registry settings there is no problem stuffing them all in one cab.
But if a two cabs contain a setup.dll there is no way of combining them without knowing exactly what that DLL does (it could be anything) and thats almost impossible (unless you can read ARM assembler well).

tristan1412 said:
Is possible to group several cabs in one cab?
I want it to save in the Extended Rom of my TyTn, so that when I do a HardReset, automatic it starts to install all the modifications of registry and some programs that I have in several cabs from the pocket, without need of pc.
I search on the forum, but I don´t find any solution.
Thanks
Click to expand...
Click to collapse
what levenum said is correct... so the best thing for you to do is to edit the config.txt file in your extended rom to have them install... HOWEVER if the cabs you are using arent digitally signed then they wont install using that method, you would need to disable the security first... Since no one has a signed disable security cab that works with the tytn the only option would be to do this on a hard reset; soft reset before the customization, when it boots run the tweak program to disable security, then go to the windows directory and manually launch the preautoconfig.exe

software alternatives
tristan1412, you can also use a software dedicated to this task.
check spb airsetup (www.spbsoftwarehouse.com, i'm not sure if it allows more then one cab), or even better airwizard (http://www.teksoftco.com/index.php?section=airwizard)
the advantage of these programs is in my opinion the compression. then you also get several options like readme/eula (with airwizard you have spash image support and even sd card output support - that creates autorun content for the sdcard)
hope this helps
RM

shogunmark said:
....HOWEVER if the cabs you are using arent digitally signed then they wont install using that method, you would need to disable the security first...
Click to expand...
Click to collapse
First of all, thanks for the answers.
now, How can signed digitally my own cabs??

Automating Program Installs

Hey all,
I have a question.
I have been playing with my 8125 a lot lately and am constantly resetting my device. What I want to know is I have one main machine that I do all my application installs via active sync that way when I hard reset my device I just have to go to add remove programs in active sync and re-check all the programs I want to put back on my phone.
Here is what I want.
I don’t want to have to tell the phone where to install the applications (I want it to default to storage card without any prompts.) and.. I don’t want any confirmation prompts ie: security unsigned, approve this application to be installed, this application was installed properly… etc.. I want to streamline the process so I can just tick the check boxes for my apps, let them download and that’s it. Currently after refreshing I have to spend quite a bit of time clicking “ok” … storage card…. Ok… storage card… ok… I think you get it.
Thanks much!

I've seen a lot of different reg keys out there that may accomplis this. Is there a way to disable the notifications and pre-set the install path peramaters?

sledwrecker said:
I've seen a lot of different reg keys out there that may accomplis this. Is there a way to disable the notifications and pre-set the install path peramaters?
Click to expand...
Click to collapse
You can do this with WinCE Cab manager

If you really reset your device that often why don't you use SPB BACKUP? A reinstallation of all your apps wouldn't be necessary - just load your backup and you're ready to go!

Ya I did think of that but here is my issue.
the reason I am constantly hard reseting is because I am changing and playing with roms pretty much on a daily basis. I've been cooking my own roms trying to come up with what works best for me and what is closest to RTM. Thus why I am always re-installing apps.
So if I use SPB backup (which I have) it saves system settings and such right? So if I am switching roms all the time will it break my device?
Thanks guys! I'm new to the forum here I just got my first PPC phone a couple weeks ago but I've been an avid windows mobile (smartphone) user for years and have worked on WM platforms as beta tester.
Gotta love this stuff!!!

sledwrecker said:
So if I use SPB backup (which I have) it saves system settings and such right? So if I am switching roms all the time will it break my device?
Click to expand...
Click to collapse
Yes you are exactly right, and so many people seem to miss this... Spb Backup, Sprite Backup, etc are full backups that backup and restore the registry and all. If you restore this from one rom to a different rom you are likely to break something (may not be obvious at first, but you have a very good chance of things being broken inside the registry that you will trip up on at some point).
So yeah, the only way around this (without building your own extended rom and such) is to create a folder (or set of folders) on your SD card with all the cabs, files, and settings that you need for when your flash a new rom. Then run through that to set things up. You can also use ActiveSync to reinstall apps (just check them all and it will put them all back on) but you have to remember which ones (if any) require a reset of your device as that can cause probs with the others that are installing (if all done together).

Yep,
but at least you can import contacts, email and pim data that way quite easy!
Since you continiously flash your device: there will be no other solution but reinstalling your applications again and again. You might want to look around for a CAB extractor and then create your own CABs with all the progs you would like to have in one large CAB ???
One such CAB Installer Creator is: WinCE CAB Manager
Take a closer look at MolskiBiz_DevPack and you will find a utility to extract CAB files. It will be a bit work to add all the registry values to the Installer you're going to create but finally you might save a lot of time since you only run 1 installation instead of xxx ...

This is good, I have been playing with wince cab and it is a solution.
Now I'm going to work on making my extended roms.. will this work? I did a full recover of my apps through active sync just an hour or two ago and it reported total size of all cabs as just over 112megs. That means I'd be flashing a MONSTER rom and would it even be possible?
2gig mini SD card.
thanks

I tried before to add some apps (cab installers) to a personalized extended rom but it never worked the way I wanted it to. You might have seen that you always have to give some inputs when ever you install programs, sometimes you get ask if you really want to install the app, sometimes you need to choose a location. So, if you add CAB installers UNCHANGED to the extended ROM it just won't install because during extended rom installation you have no way of providing that information.

correct order of cabs?

hi everyone!
as there are many various cabs flying around here (eg. cab & cab2 from xplode, Addon cabs on Helmi_C's WM06 rom, various HTC plugins, etc.), i wonder if there is a correct or some kind of "best" order to install them!
how does everyone's install sequenz look like?
are there any known problems, which result from installing in a wrong order?
or is it totally nonrelevant...?
regards,
krz

AFAIK the only cabs to be installed in a order are:
1. ArcsoftMMS4.2.8.1.cab
2. MMS_enable.cab
from Xplode cabs2

DANDANA said:
AFAIK the only cabs to be installed in a order are:
1. ArcsoftMMS4.2.8.1.cab
2. MMS_enable.cab
from Xplode cabs2
Click to expand...
Click to collapse
QFE
You are right about that

thanks for your answers!!
i knew about the MMS cabs...
i just wondered, because the first time I upgraded to WM2006, everything worked totally fine. I hab no problems no matter what, wifi worked like it should, bluetooth as well, no turning on here and turning on there again (HTC Home Prob), ...
now, after i have downgraded to WM2003, merged the ExtROM and upgraded to WM2006 again, i am experiencing loads of problems!!
the "turn wifi on"-bug occured, i could not turn wlan adapter on with one simple click on the icon in CommManager...
then, after a softreset, the device froze while booting (there is some other thread about that problem). so i had to perform a hardreset again...
i configured my device again and installed the various cabs again, but in the end my device turned out to be totally screwed... turning on wlan was a pain, message-windows in which u can normally choose one of the available wifi spots were text-less (just empty window, only headlines visible...)...
so, i had to hard reset my blueangel the second time today and am now sitting in front of a fresh install of WM2006, thinking about what to do.....
what cabs should i install?
which HTC Home cab is actually the "best"?
any known problems regarding PPCContacts Manager?
do you thinkl, that those problems are somehow connected to merging ExtROM?
disappointed,
krz
ps: can anyone recommend a good backup problem, which saves me from setting up all settings all over again after eacah hard reset(timezone, regional settings, device id, reg tweaks, ...) ??