Related
Hi!
Before I start tese are my current system info:
XDA2ii (O2) - UK
ROM version 1.10.00 WWE
ROM date:24/12/2004
Radio ver: 1.00.00
Protocol version: 1337.39
ExtROM version: 1.10.124 WWE
OS: Windows Mobile 2003 2nd Edition
Version 4.21.1088 (build 14235.2.0.0)
I am trying to connect to my home WIFI network but I can't seem to connect. It is indeed picking up the server (name appears) in list but just stops at connection to network. It can't seem to get any connection at all. My wireless router (Linksys WRT54G) can't seem to detect it as well.
I have tried connection to WIFI at an airport and it seems to work but not at home. I have set my Linksys to Mixed mode (B and G) but still can't get it to work.
Any advice?
Thank you!!!
XDA IIi (or 2i) and 3COM WAP
Hi.
Got the exact same (everything) XDA IIi model (also O2/UK). I'm also having problems with WLAN/WIFI connectivity both at work and home. Both cases it's a 3COM OfficeConnect WAP (office one not setup by me). I thought I validated that the XDA seems to be OK by being able to connect to a neighbours WAP (some BT-Voyager thing) with no apparent problems. And so was thinking that the problem is with the 3COM WAP. However, your post raises doubts on my conclusion ...
The search goes on ...
Re: XDA IIi (or 2i) and 3COM WAP
hi
My case is even worse, it can not detect any wifi signal at any of the hotspot in my city. Go to wireless Lan Manager, under WLAN button (red status) there is alwayls a sentence: "no connection in use". Clicking to it, the device seem to search but found nothing.
Try softreset, hardreset but the problem remains.
In addition, I try to turn off the phone (turn on flight mode) then it don't allow to turn on bluetooth and wifi too.
Maybe it is due to hardware error.
Really disappoint with O2 UK
Regards
Tuan
WiFi connection problems with XDA2i
I have exactly the same O2 xda2i build as Johnnyboy, and precisely the same problem with WiFi as Blackwolf and Johnnyboy. I have a netgear WiFi access point at home, and have disabled the attach restriction and removed WEP. However, although the XDA can see the network name, it cannot connect to the network (just displays connecting...) nor does it show anything on the signal bar. Needless to say, it does not display SSID, Tx rate, Channel, IP address or any information from the network.
I have bought this device specifically for wifi access, and it is somewhat disappointing. Anyone have any idea how this can be fixed? (if at all :? )
XDA Wi-Fi Successful Connection!!!
Hi,
I'm new to the forum and new to XDA2i....
I too had many frustrations connecting the wi-fi...but now I've cracked it, here's how.......
On first very first use (or following a hard re-set) device users are prompted to choose “What do you want WLAN to connect to?” The option bullets are ‘Internet’ or ‘Work’….’Work’ should be selected, this will connect them to the nearest WLAN (if this network is WEP encrypted it should be switched to ‘Open’ rather than ‘shared’ as is often the case).
Next prompt asks for any WEP Encryption ‘Pass Key’ to be input, when doing so omit any ‘-‘ between character pairs. Normal start-up should then be completed. Once device is up and running…..
From ‘Start’ pull-down on the ‘Today Screen’ select…. ‘settings’>’connections tab’>’connections icon’>’advanced tab’>’Select Networks’> pull-down ‘My Work Network’ > ‘OK’ out of selections to save and exit.
Go to ‘Wireless Manager’ in programs, select WLAN icon from main screen (which should turn green to show active), then select mini ‘WLAN’ icon from lower toolbar to see the status of the connection, quality of signal etc.
That did it for me......
Cheers
Finally cracked it! As I never had any problems with my Netgear MR814 wireless router, I assumed the issue was with the XDA2i. Instead, a router firmware upgrade did the trick! Should have thought of that earlier.
Cheers, S.
When i first got my XDA 2i home from the shop the first thing it tried was the wireless lan, and the same thing happend to me also..... everything fine in the router but still unable to connect the xda.
anyway after few hours of going over every single setting time and time again , it finally worked !!
i left the Wlan enabled and after a period of a few minutes it connected to my network.
So i think the XDA 2i is quite tempremental with Wlan, as i know my settings were correct.
having said that, i have had no problems with Wlan t all since then, it will now even connect to other Wlan hotspots with no problems whatsoever.
The only problem i have now is recieving a decent O2 Cellphone signal i my area
Well I have a XDA IIi and it connects fine and allways has to Citi Hotspots, TMO hotspots and my own Linksys WRT54GS. Netgear is the biggest piece of crap ever sold. If you have one I suggest you soak it in gas and burn it.
I had a problem with my XDA IIi connecting to a home Wi-Fi network with a Linksys WRT54GC router: a signal showed in the Wireless LAN Manager, including an IP address, but the WI-Fi icon at the top of the Today screen had no connection bars. After days of this I went to the Linksys settings for an unrelated reason and disabled Wireless SSID Broadcast. Inexplicably this appeared to cure the WiFi problem with the XDA IIi, and I can now connect with ease.
Ok, I might as well add my question to this thread, as it's relevant.
I have an O2 UK XDA2i, and I've also experienced similar problems connecting the wifi and managing to get it to work properly.
I'm at Uni in Birmingham, and at some of my faculties there's wifi for students and staff to use - they give the broadcast SSID UCEOpenAccess, and you use your system logon (in my case STUDENTS\F05310011 and my password (secret ).
I have these details set in the LEAP tab of my wireless lan config (in the WLAN settings) - I have an entry named UCEOpenAccess, and I have my username and password (and domain) set correctly, and the auth type set to Open System (as opposed to EAP, doesn't seem to make any difference whatever I set it to)...
... I just can't connect to any wifi network! I can't even _SEE_ the wifi network, and I know it's there, I can pick up other wifi networks and detect them using Wifi Graph and Hitchiker. I just, bizarrely, can't see the one wifi network I'm trying to connect to.
It's incredibly frustrating. I have my network adapter set to connect to Work (as I've seen advised on these forums), and my IP is assigned via DHCP (they use a weird class b subnet for their network), and the proxy to connect to the Internet is also setup correctly in my Network (This network connects to the Internet checked, This network uses a proxy to connect to the Internet, and proxy is specified in the box), and as the proxy is a SOCKS 5 authenticating proxy, all the relevant details and username+password are in place in the Advanced settings.
Still doesn't work!
Is it due to my original (and decrepit, from the looks of things) firmware and software versions? I'm running original radio, is that a problem maybe? I've scouted about quickly for updates from O2 for my XDA, but I don't want to install a Japanese update as I don't reallllly want to have to read Japanese (and I can't, etc) - I don't want to make a brick out of this brand new phone, but the resources for total xda newbs is somewhat lacking. Can someone just poke me in the right direction with a stick?
Cheers all.
Hi there,
Yesterday I bought the MDA Vario and all is working fine, except for the Wi-Fi functionality.
At home I am using a WEP ecnrypted, non-DHCP and MAC-filtered wireless connection, which works fine on all computers, laptops and my HP iPAQ.
The Vario seems to be the first having trouble.
After (I think) appropriate configuration, the Vario keeps trying connecting with my network (the moving arrows alongside the antenna icon) until forever.
This is my configuration:
I first checked up my Vario's MAC address (WiFi settings - Advanced tab) and added it in my wireless configuration.
When I setup my Vario for use with my network, it actually finds my accesspoint and asks me to enter the WEP-code.
But, I also need to setup (Network Cards) the Vario's IP, Subnet and DNS addresses in the "Network Adaptors Configuration" screen.
The only thing is, which one should I take for this?
The ones that are available are:
---------------------------------------------
AsyncMac NDISWAN-miniport
PPTP NDISWAN-miniport
External NDIS-host
L2TP NDISWAN-miniport
NE2000 compatible Ethernet driver
Virtual Ethernet Intermediate Miniport
SDIO WLAN Wireless Adapter
---------------------------------------------
At first I thought it would be the last one, but when I configure the adresses in there, there is no connection to be found.
-
I have to say I didn't let the Vario install the stuff from the Extended Rom, by soft resetting immediately once the "first device setup" was completed.
May I be missing something from the Extended Rom that causes this problem??
Thank you very much.
search around on www.howardforum.com.
you will find info, i came accross this stuff more than once.
enaime said:
search around on www.howardforum.com.
you will find info, i came accross this stuff more than once.
Click to expand...
Click to collapse
Hi,
Thanks for the tip, but I couldn't find anything regarding my problem.
Any more suggestions?
Try going to settings > connections > wireless lan > power mode and setting to best performance.
mrjeffery said:
Try going to settings > connections > wireless lan > power mode and setting to best performance.
Click to expand...
Click to collapse
Tried that.... no result...
Hmm, i had a few problems with my wireless lan at home.
Firstly i couldn't get the device to connect over WEP if i entered the passkey in ASCII - i have to enter the HEX version on my mini-s to get it to work.
As for the IP settings you should use the SDIO WLAN wireless adaptor i "think" but i've tried to set all my options to a different IP and my networks DHCP just takes control anyway so i cant test for sure without disabling my dhcp server (fraid i wont be doing that - dont want to have to manually set everything)
Ok, well... it works now.
I don't know how, but suddenly the "moving arrows" stayed "steady" and there was a connection with my WLAN network. Don't know why it took so long, but okay...
Anyway, I think the WLAN antenna inside the Wizard is not of a too good quality. Comparing to my HP iPAQ hx4700, the Wizard needs noticeable more time to connect with the network and isn't as sensitive as the iPAQ's.
The iPAQ keeps a good and stable connection everywhere in and outside my house, where the Wizard loses it at some spots.
Im looking to get the Wifi working on my Vario at home. My current Access point wont connect due to T-mobile's lock out of the 802.11g.
So I can get a Access point that works, I thought it would be helpful to post up your Model with a Yes or No after you have tried all the different settings as posted on the forum e.g. different channels and mixed mode etc.
This is for g Locked Varios only please not ones with flashed ROMs.
Please keep it simple Model YES or NO.
Thanks
:wink:
To Start us off......
Inexq HR054g Access point (NO)
if your Wizard has b only (ROM issue, not hardware) then ANY router which is set to allow g only will fail to connect. yours "should" allow "b" devices to connect http://www.inexq.com/web1/images/product/spec/hr054g.htm
So maybe you have a setting that is allowing "g" only
Beeble said:
if your Wizard has b only (ROM issue, not hardware) then ANY router which is set to allow g only will fail to connect. yours "should" allow "b" devices to connect http://www.inexq.com/web1/images/product/spec/hr054g.htm
So maybe you have a setting that is allowing "g" only
Click to expand...
Click to collapse
Router is set to mixed mode, it can see the network but wont connect
Have you got MAC address filtering enabled on your router and forgotten....I did.
Also try changing WLan card settings on your XDA from Best battery to best performance..Make a lot of difference. and many have found theirs connects after this
All turned off any other options
I have a BT2100 wireless router and mini-s, sometimes it won't connect until I stop active sync running on the mini-s ???
3-Com OfficeConnect ADSL Firewall Wireless 11g Router (set to mixed)
Vario will only connect when router set to open access i.e. security disabled. Any other setting i.e. WAP, WEP causes the routers internal DHCP server to fail to send an IP address back to the Vario... or the Vario being unable to acknowledge the router?
Have got a couple more routers comming my way, will post them up when Ive had a chance to test them
devasoftware said:
3-Com OfficeConnect ADSL Firewall Wireless 11g Router (set to mixed)
Vario will only connect when router set to open access i.e. security disabled. Any other setting i.e. WAP, WEP causes the routers internal DHCP server to fail to send an IP address back to the Vario... or the Vario being unable to acknowledge the router?
Click to expand...
Click to collapse
I've seen this issue detailed elsewhere but I can't remember exactly where - apparently for some reason the 3com sends back an IP v6 address when security is enabled, which the Wizard can't use.
So far I've used a cheapie Origo wireless router (conexant chipset) and a Netgear D834G (in mixed mode), my Wizard seems happy with both.
John
Could someone please help? I;ve got a spectec wifi card, WM5 driver. I get the antenna symbol, but no bars or signal strength. I 'configure' the wlan 11b network adapter for server assigned IP address AND connection to 'the internet' but no joy. Is there something at the router end i need to do?
What device are you using? why the WM5 driver? Is that driver also backwards compatible with WM2003?
Its the compact II, hence wm5. The spectec wlan card is backwards compatible with wm2003, but drivers are specific to the os (at least that's my understanding) Well, when i tap on IE i just get 'connecting' and that's it. Any ideas? Spectec don;t seem to be responding...i don;t know if its a driver issue or what...
Philo said:
Its the compact II, hence wm5. The spectec wlan card is backwards compatible with wm2003, but drivers are specific to the os (at least that's my understanding) Well, when i tap on IE i just get 'connecting' and that's it. Any ideas? Spectec don;t seem to be responding...i don;t know if its a driver issue or what...
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewforum.php?f=20
You'll get the answers in the correct forum. Just go to the link above.
Mda Compact II, htc-charmer,etc,etc..but what's in a name? Man, this is the right place ?!?
my mistake....keep forgetting that there is a Charmer out there :lol:
There isn't an official forum for the Charmer as yet in this site....what is your router brand? Can the WLAN detect the SSID of your router? Is the SSID broadcast in your router switched on?
First thing is that your Wi-Fi must be able to detect that there is an access point nearby and should at least pick up the SSID of your network.
Philo said:
I 'configure' the wlan 11b network adapter for server assigned IP address AND connection to 'the internet' but no joy. Is there something at the router end i need to do?
Click to expand...
Click to collapse
You'd be better off using the DHCP to "ON" on your wifi server. But if you manually configure it to use your own IPs, you also need to manually configure the IP settings on your Handheld. I cant tell specific details of how to do it on your handheld because i dont use spectec wifi card. But you should be able to look at its settings and tweak it.
Also make sure, as O2mininoob above said that your SSID must be Broadcast. Also make sure that MAC address filtering is OFF, otherwise you also have to manually input your handheld's MAC address.
Let me just add, i'm running apple-mac wireless networking - does that really matter? I can access wireless via non-Mac laptops - a second point, the spectec wlan utility on the mda won't open even after reinstalling.
Ok, I;ve disabled all restrictions on wireless clients on the base station -
But i;m not sure what SSID is, nor can i find anything about broadcasting under the settings.
P.S But there's one thing i don't get which might be of some significance (or probably not!)
1. Under the 'internet' tab on the PC (not the mda) which deals with TCP/IP settings, i'm showing one IP address which is teh same as the router address.
2. Under the 'network' tab (which deals with how the base-station's internet connection is shared with other computers) I'm sharing a single IP address using dhcp which is different from the above IP and router address.
Does the difference between 1 & 2 mean anything? Three laptops in the place are connecting without problems.
Well, thanks for any light on the matter
Sorry i dont know anything about apple-mac networking, but, if your other computers can connect to your router, then theres no problem with your router...
the problem might be with the way you connect your handheld to your router...
you configure your handheld the way you configured your computers to connect to your router.
about SSID> on your hanheld, if you perform a search for wireless network, can it find your wireless network name? (example> ''Belkin Wireless'' or ''Netgear'').
if your handheld fiinds it, then dont worry with SSID as im sure it is being broadcast.
also, make sure that wireless mode is set to both 802.11b and g.
My Spectec card came with drivers and a WLAN Utility program. When you run this program, it usually displays the SSID with the strongest signal. Do you have it installed in your PPC? What does it say when you run it?
Also, go to Settings -> Connections -> Network cards. If your Spectec driver was installed correctly, you'll have a window displaying all the SSID's that the card has detected. Tap and hold on your router's SSID and tap connect.
HTH. Good luck.
Spectec tells me that the wlan utility is incompatible with WM5. And i;m not getting a list of any SSID's. I've pretty much given up! Cheers for the feedback.
There's a WM2005 Spectec Driver here. Maybe you can try downloading this one, un-install the one in your PPC and install the new one.
Good luck.
Hi Guys & Gals,
I have a brand new HTC Touch Diamond 2, on O2 network - this is an untouched device, all i have done is booted it up and sync'd it with my PC,
I have tried to connect the device to to wireless networks now with no luck.
1. My home connection - security enabled WPA-PSK password protected, The phone can see the network, i type in my network key - i also checked the password on my router setup. The little spinning circle comes up and try's to connect with no luck. It will then keep trying for as long as the wireless is on
2. Home connection again with no encription - again the same thing
3. Work connection WEP secured, type in the key, same thing again.
Has anyone encountered these sorts of problems before in the past - if so how do i fix it so i can connect wirelessly.
Cheers Guys
JdeRonde
Doubt if this is an issue with the phone more likely to be a setup of the wireless.
What router do you use?
Do you have MAC Filtering enabled?
Do you use your router as a DHCP server?
Are there any error messages displayed on the phone?
When it doesnt connect and you tap the notification area (top bar to the right of START) do you have any messages there?
jderonde said:
Hi Guys & Gals,
I have a brand new HTC Touch Diamond 2, on O2 network - this is an untouched device, all i have done is booted it up and sync'd it with my PC,
I have tried to connect the device to to wireless networks now with no luck.
1. My home connection - security enabled WPA-PSK password protected, The phone can see the network, i type in my network key - i also checked the password on my router setup. The little spinning circle comes up and try's to connect with no luck. It will then keep trying for as long as the wireless is on
2. Home connection again with no encription - again the same thing
3. Work connection WEP secured, type in the key, same thing again.
Has anyone encountered these sorts of problems before in the past - if so how do i fix it so i can connect wirelessly.
Cheers Guys
JdeRonde
Click to expand...
Click to collapse
I too had problems with WIFI. My home work network was visible but it would immediately drop or not be able to connect. A few days later it started working flawlessly and I have no idea what changed.
I am sure you have tried a soft reset but just in case...
Tony
I have a NetGear DG(Some Number) v4 ADSL wireless router, which i have set up and works for all of my other devices (ie. Laptops, PS3). With a simple encription key.
I get no messages etc, all it sais is that its 'not connected' and there are no new notificatons
It then persists in trying to connect again and again, when it cant connect for a while, it then comes up with 'new network connections found' in the notificatins area.
I have switched the power mode to best performance with no luck.
I have tried on 2 different networks now. including with all encription off. WEP and WPA-PSK - This is driving me nutz cuz i love the phone, i just want to use it to browse the web without paying out the nose for it.
DHCP server is dynamic from my ISP.
I have contacted HTC now about the issue, but im going to feel so stupid if it turns out to be somthing simple like a setting on the phone somewhere.
But thanks for the reply
Have you checked you arn't using MAC filtering?
Log-in to your router and check under Wireless settings > Wireless Station Access List.
While you are on your wireless setting page check what Encryption your using for WPA-PSK? TKIP? (The wrong encryption chosen will cause you not to be able to connect)
Ok maybe telling you how to suck eggs but on your phone:
Settings > Communication > Wifi
Select Advanced at the bottom right.
Select Change Network
Click Add new...
Type in the name of your network (The SSID also found under wireless settings, Case sensitive)
Select Connects to: The Internet
Leave the other two boxes unticked.
Click next.
Select the correct Authentication - WPA-PSK is different to WPA2-PSK. You will probably be using WPA-PSK.
Select the correct Encryption (Propably TKIP)
And type in your Network Key
Click Next and Finish.
How does this fair and what are the results of checking info on wireless setting page?
Im at work at the moment trying to connect to the WEP connection,
This connection most deffinatly does not have mac filtering on it, just asked the network tech.
Okies.....
Changed the network key to.... Shared key and it works
so i am guessing that it must be somthing to do with my setup at home..
Cheers guys
Cool.
Just match up the Authentication / Encryption / SSID and Network Key from the router to your phone setup and you should be fine.
HTC TD2 Wifi issues
Hi
There's some discussion around the web about this problem of encrypted wifi connectivity: a few things to note
1] the TD2 is _very_ sensitive to the power settings applied to the wifi chipset.
The default power saving settings are only likely to work if all other on-board devices - bluetooth, HSDPA, GPS [and maybe even the screen] are either off or in low power mode: the general recommendation seems to be that one adjusts the wifi device power to be "best performance" if one wants to guarantee connections.
2] several people have reported that both the wifi device [card] and the settings for the particular wifi lan [SSID] to which you are attempting to connect should both be configured for "Work" rather than "The Internet".
3] these secured/encrypted connection failures are not about the WiFi access point or router: I've personally tested with several different makes and models of Router and Access Point [3com, Cisco, Enterasys, Netgear, DLink, Belkin etc] - both on my own and on client networks where I have complete control of security, and have also methodically tested every single combination of TD2 setting for WEP and all variants of WPA. In each case my TD2 has failed to make a valid encrypted connection.
The same device will happily connect to "open" unencrypted access points and routers.
Other models of HTC device, such as the Tytyn II and Touch Pro work fine on the same access points and routers: so we can be pretty sure that this is specifically a TD2 issue.
Conversations with HTC's European Tech Support on this issue have not been helpful to date, but they HAVE pushed the issue further up the line, so there's a chance that we'll see a resolution.
Robert