Related
I was curious. I've noticed people said that if you put the 4.00.16 ROM on, the only way you can downgrade it, is if you reprogram the ROM from the SD card and not by the EXE method.
I was curious as to WHY? What does that .16 ROM do to the XDA to prevent you from doing an EXE rom reprogram?
So far, we lacked time to look into this one. Tell us, and we'll see if we can fix it.
Downgrade unseccesful using SD method from 4.00.16 ver
Sorry if this is OOT: I'm a non techie person so please somebody explain me how to use the SD card reflash metod to downgrade from 4.00.16 bact to 4.00.11 version. If write the new rom to sd using XDAtools it's done. after it I put it back the SD card back to the XDA. I enter the wallaby 5.17 screen by pressing power+ soft reset button. It said wait and then GSM ok after that freezze.
What I'm missing?
The why, I can't say as I have not investigated in detail, I just said to heck with it and bought a SD writer.
What happens after you load 4.00.05 and 4.00.16 is when you try to run and upgrade/downgrade/re-install from Prgramme-A or the newer programmer that came with the 4.00.x installs it fails saying it can't connect to the device, please check to make sure it's plugged in (even though there is a active connection with Activesync).
Using the SD card there is no issue with running the upgrade.
-rich
but what is it that .16 has that .11 doesn't that stops you from changing ROMs via the EXE method?
Also, after putting on .16 and you go back to say .11 via the SD boot method, are you able to use the EXE method to change ROMs after that?
Currently I use the AT&T A20 radio stack and was thinking about trying out the Tmobile 6.24 to see how it works out. Haven't decided yet.
Investigating the no reflash .EXE method
Ok I have found a roundabout method to resolve this only using the .EXE method.
I used the rom kitchen to generate me a 4.00.11 ENG WM2003. After flashing my phone and wanting to make sure i could revert I tried my origonal o2 provided flash upgrader "Radio_Unit_Upgrade_v31413.exe" and the latest downloaded one from the o2 website "Radio_Unit_Upgrade_v31703.exe" neither of which would let me flash them - i get the error "this rom is not for this device" (or some such).
I went back to the rom kitchen and built myself a 3.17.03 ENG O2-Euro rom image and flashed that onto the phone. this suceeded where the o2 stock .EXE failed and I was nearly back where I started.
Now that I had my rom kitchen 3.17.03 back on I tried to install the latest "Radio_Unit_Upgrade_v31703.exe" file again and was greeted with sucess once more!
The question this begs is the same as the origonal however, ok we can get the stock provider rom back on - but why will it let me flash the rom kitchen 3.17.03 back on and not my o2 downloaded rom? Hopefully the developers will be able to spot whats going on and sort it out in the kitchen (hopefully removing what ever right protection the new rom installs).
Hope this helps, shout if you want me to test with a specific rom version (for uk / europe phones) and ill give it a whirl for ya
I think the "official" rom checks for versions, whereas the roms from the kitchen use a modified bit of code called "adaptrom" to fool the software. I wish I had a tenth of the capabilities of the guys on here that work out all this stuff.
cruisin-thru said:
I think the "official" rom checks for versions, whereas the roms from the kitchen use a modified bit of code called "adaptrom" to fool the software. I wish I had a tenth of the capabilities of the guys on here that work out all this stuff.
Click to expand...
Click to collapse
I'm not sure about this, but i will give you some hint, ok :?
The T-Mobile Rom has a protection to it that you can not upgrade any ROM except T-Mobile ROM's other than that if you have a version of rom that is not T-Mobile ROM you can use the adaptrom to normally update any kind of ROM because adaptrom ignores the Version like PW10A1:007, the explanation of this versioning is in this forum(some kind of country and GSM band 1800/900, 1900/900).
Now why we have to use SD card after we update T-mobile ROMs, if we want to change to another kind of ROM's, because if we use "exe" or sometimes we called it "Program A" it checks the version of the ROM's, since the adaptrom can ignore only the version of the ROM's it can ignore the Type of ROM's, if it is T-Mobile or other ROM's, now for SD card it doesn't check for any version or type, and it goes directly to updating the ROM's in the Bootloader way or we can call it forcely updating the ROM'
s.
Hop this help.
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata"
and then
"ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
Stupidly, I haven't got a SD card. :evil:
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
Read the above post that starts like:
"Ok I have found a roundabout method to resolve this only using the .EXE method"
HTH
Qman said:
Read the above post that starts like:
"Ok I have found a roundabout method to resolve this only using the .EXE method"
HTH
Click to expand...
Click to collapse
Hi Qman,
No matter which ROM I cook, when I try to install it using the .EXE it gives me the message I posted before.
Would you explain to me, idiots guide, how to flash not using a .EXE?
or, have you got any sugestions?
i did it!!i can t believe i managed to upgrade to the new t-mobile rom using xdatools without any problem.it went smooth like a glass of oil and now it reads:
ROM Version 4.01.16 ENG
ROM Date 02 04 04
Radio Version 4.21.00
Well done to me( ...and all those people working hard behind this site)!!
it was much less problematic and complicated than i expected and i d like to say to all newbies and not expert people same as me that if i managed to do that, everyone can.just spend an hour or two reading through all the posts in this forum and you ll learn how to do it.
Question: as soon as i soft reset my device there is this error message coming up in the today screen:"This program only works with windows mobile 2003 (4.20.1081).now what program is it referring to?if i press ok to that error window to close the message everything works fine and i don t really know where the error is.has anyone experienced the same?
thanks
...sorry...
....sorry guys...i was trying to post this into the t-mobile 2003 official rom page but i must have entred post new topic rather than post a reply by mistake.i will post it there cose it makes a bit more sense and if someone replys to me it might help some others that just updated to t-mobile 2003 .
developers you might want to delete this post here and i apologize again for the mistake.
ciao
Where did you download the rom? It is possible that if you cooked a rom in one of the kitchens you may have checked a program that will not run under wm2003 so when it atempts to initialise from rom it gives the error. Now you know how its done maybe you should cook another rom and pay particular atention to the additional software options available to you, if the text next to the program says 2002 only then it should be unchecked when building a wm2003 rom.
Re: ...sorry...
emm053 said:
....sorry guys...i was trying to post this into the t-mobile 2003 official rom page but i must have entred post new topic rather than post a reply by mistake.i will post it there cose it makes a bit more sense and if someone replys to me it might help some others that just updated to t-mobile 2003 .
developers you might want to delete this post here and i apologize again for the mistake.
ciao
Click to expand...
Click to collapse
emm053,
I also posted this on the other thread, but thought I'd copy it here in case someone is interested as well:
-------------------------
Yes, I found the same problem. After a little trial and error, I found that the file wm03hotfix.exe in the Windows\Startup folder was the culprit. I moved this file out of Startup into a backup location (just in case), and the problem went away.
Don't know what this file is supposed to do, but I guess we don't need it.
-Jason-
"This program only works with windows mobile 2003 (4.20.1081)"
Had this problem also. what i did was remove the start up programs from the start up folder (all the t-mobile apps) and it doesn't come up any more... again this is what i did to remove the error. i'm not sure this remove it from your XDA.
It's the update for WM 2003
I had the same problem. There's an update in the Startup folder (Found in \Windows\startup) called update.exe or something. Just delete that and it'll sort the problem.
It's the update for WM 2003
I had the same problem. There's an update in the Startup folder (Found in \Windows\startup) called update.exe or something. Just delete that and it'll sort the problem.
Hi mates,
the error mentioned here will occure if you checked "fix multiple reset bug" while cooking your ROM.
the supplied s/w (wm03hotfix.exe) gives this error message. there is another perfect tiny s/w to solve this WM2003 bug and it's called clear_notify.exe
simple search and you will find .. just put it in \windows\startup directory.
Hello all.
i have been searching the forum for the solution of this problem, some guys suggested solutions that involve a file that is no longer available, upgrade.zip which is aparently a radio upgrade(or downgrade) made for the SD card (a startup.exe in a startup directory).
Well, having said that, i had to solve this problem last night, and here it goes.
after trying original ROM upgrades, all versions, 3.14,3.17,3.18~4.
nothing worked.
finally, i grabbed a copy of xda-developers's 1.1 ROM
and guess what!!!
the phone started up, gave me the screen allignment and the whole menu!
sure enough, ran file commander(that version did not have file manager) copied the RSU files over to the windows directory, and the exe file to the windows\startup and rebooted the phone.
it stopped at 1% again... NOW REMEMBER, i had an EMPTY BATTERY...
the 1% ERROR is a battery issue, that turnes into this issue when the modem upgrade FAILS.
so here is what i did. and you be the judge.
i ran active sync from the phone, and it did connect(while the upgrade program is still running) and left the room/
in 10 minutes i came back and the upgrade was completed, so here is what i think
i think that the RSU will still run if it was in the background!!! even with an empty battery(connected to the charger ofcourse.
i did not have much time to do anymore testing, but i am sure that someone with the same problem will make the time. the key from my experience is that the proccess will complete if it is in the background.
there u have it.
good luck.
i forgot to add that the upgrade i used was taken from yorch's page and it was the latest Tmobile, i had to downgrade later to an older version that i have to solve the network issue, but it was done(the downgrade) like a charm, i had a full battery then.
here is the Tmobile RSU link v6.24
http://www.yorch.net/downloads/ROMS/TMOradiostackupgradeR624 .zip
a 1.26 MB file.
Hi!
Now I'm taking a try (unfortantely I've found only the special edition rom 1.2).
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
One more thing: maybe the version of active sync counts? Mine was 3.8.
plg said:
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
Click to expand...
Click to collapse
http://lumpistefan.dyndns.org/tools/special_rom_1.1.exe.zip
HTH
Stefan
LumpiStefan said:
plg said:
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
Click to expand...
Click to collapse
http://lumpistefan.dyndns.org/tools/special_rom_1.1.exe.zip
HTH
Stefan
Click to expand...
Click to collapse
Thanks, Stefan! Maybe this one will help...
Hello to all, and mr stefan,
I upgrade my qtek 1010 with SFX56 windws 2003, it also upgraded my RSU, which is not working in Middle East. Kindly advise me how to downgrade or upgrade with other RSU. Thanks
your problem is in the network selection, search the forum for the proggy that changes it from 1900 to 900 and you should be OK.
i hate telling anyone to search i know how hard it is, but i do not have a clue where the proggy is, meanwhile, if i run across it, i will point it out,
if not, go to the bootloader, select GSM and change it from there, you will loose all data so backup first,
Good Luck.
search for "bandwith switch tool"..... good luck.
here it is on wiki
http://wiki.xda-developers.com/index.php?pagename=BandSwitchTool
tell us if this fixes your problem.
if not, you will find links to radio upgrade on
[/url]http://lumpistefan.dyndns.org/tools/ thanks to LumpiStefan
for a great resource.
good luck.
never knew you can post as guest
well, again, let us know what happens.
hi all
I just picked up a XDA from a guy who screwed up the radio stack upgrade (it cosy me @$80 USD ) and im now on a mission to fix it...
using your advice I used the XDA developers rom 1.1, this got the phone to start up with the working today screen and menus etc....
I install/copy over the new RSU upgrade files over and reboot
but here is where i get a bit stuck...
I cant get into active sync fast enough before I get the 1% RSU upgrade error, so the upgrade wont run in the background, it just sits there....
how do you get into active sync before the error comes up?
cheers
MADMAX
I have a Dopod C858 that is from China. It currently has the Chinese version of Windows Mobile 5.0 and I am looking for an English upgrade to Windows Mobile 6.0. I tried using the RUU for the HTC P4350 but it came up as a Model ID Error and I couldn't continue. I tried doing a CID Unlock using IMEI check but they don't support the Dopod C858. Does anyone have any ideas? Oh and one more thing. Currently, the Comm Manager on my Dopod does not have the WiFi option. I noticed after I did a hard reset that when it was loading the .cab for Comm Manager, it displayed something like no_wifi.cab. Did Dopod Asia purposely disable Wifi?
EDIT: I contacted IMEI Check and they helped me out by enabling my IMEI. My device is now supposedly "CID Unlocked."
QQ group 33128089
Any luck with finding this via QQ? I have the same need...
Here is what I did: I CID Unlocked my phone using IMEI Check and downloaded the DOPOD Rom file located here. After that follow these directions and you should have an english rom:
Tools you need:
==============- HexWorkshop from here
- the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
===========a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use:
"Extract files to folder ..." from conext menu Now it will unpack all
the
files
c) in the new folder you will have ONE file like "HRUU_signed.NBH"
(*.NBH)
RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from
context menu
d) You'll see on the 5th row HERA10000
==!!! make it HERA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex
Workshop" from conext menu
Search for text "BsaD5SeoA" (without quotes, case sensitive)
OVERWRITE "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the
file
ROM-Update:
==========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker **
4) After phone is unlocked run unlocker (again) BUT when the unlocker
ask
for UNL file, remove the USB cable from the phone THEN press "Cancel"
on the
unlocker select file window (unlocker will close on PC). NOTE: The
screen on
the device will not show something usefull when in this mode. Most
probably
it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like
it
is!
5) After you closed the unlocker, attach usb cable again (phone has
still
white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message:
"Data Crashed, contact service provider" (-*!NO PANIC!*-)
==Simply fix this problem by running the unlocker again and this time
select the key file normal way (full unlock process again).
The only problem is that the ROM is WM5 and there is still no Wifi.
Credit goes out to the IMEI-Check Team who provided me with the instructions!
Great, thanks for the info.
One question -- can you use the steps outlined to upgrade to WM6?
I was able to install WM6 before, using "aserg way", but the radio didn't work b/c the radio rom was not updated as part of the flashing process.
The way I understand it, if I can unlock my device and use the process you listed, I should be able to use a RRU which has an updated radio rom. After that, I should be able to sucessfully update to wm6.
What do u think?
I tried flashing a couple of WM6 roms but both of them didn't work. One stopped at 2% (Invalid Model ID) and the other one gave me an "Invalid Command." I currently have radio version 2.71.90, do you think it will work with WM6? If so, can u provide me with instructions on how to flash to WM6 using the aserg method?
Last time I tried upgrading to WM6, I found a cooked rom posted on this forum, and used 'aserg's' method to update it w/o updating the radio rom.
The method basically involves using a tool called 'awizard' along with a few other small utilities. The instructions should be easy to find on the forum here, let me know if you can't find them.
But before you do that, verify your radio is up to date. There is a minimum radio version you need to have (a search for radio rom on the windows mobile 6 forum should turn it up) before you can fully use a wm6 rom. The only known way to update the radio rom is to install an RRU package (which it seems like you've been able to do).
Currently, I'm waiting for my purchase & id to be validated with IMEI check.
Once that's done, I'll start with the steps you listed and try to get my radio rom up to date. After that, I'll select a rom, and do whatever it takes to get the rom installed.
I'll record all the steps I take as I do it, and post my results.
Don't worry -- I won't waste any time here, I've been waiting to update my device for a long time.
i'll be waiting right here. good luck!
oh and another thing, i am currently using this rom (ROM ver. 1.8.405.1). it gives you radio version 2.71.90.
It appears we need to find an RRU which includes a radio rom of 2.79 or higher.
We both currently have radio roms at 2.71.90, which is not good good enough for WM6.
I'm guessing we could use one of the posted upgrades (look in list of available official shipped rom's) and upgrade, even if we can't find one in english.
Afterwards we should be able to upgrade to wm6 of the appropriate langauge.
i read somewhere that one of the german ones has an updated radio rom. would you be volunteering to try first?
Yah, I found a few RRU's which contain a 2.79 version of the radio. I still need to wait for IMEI to verify me before I can continue with the process though.
btw... what time zone are you in? (I also bought my device in China, I live in Shanghai right now)
i'm in shanghai right now too!
i'm wondering if you can answer this for me. i don't know why some roms work and others don't. I currently have ROM version 1.8.405.1 WWE. Before that I successfully installed ROM version 1.7.707.3. I tried to install 5.4.405.1 but that didn't work. Am I supposed to install the updates in order of their release?
The order shouldn't matter. But, now I'm concerned -- because 5.4.405.1..etc is precisely the way to upgrdade to wm6 (since it has the 2.79 radio rom).
How did that update fail? Did you try updating after first unlocking your phone, or did your failure happen before you unlocked?
it gives me this after i try to upgrade: ERROR [300] : INVALID UPDATE TOOL
I've tried the steps you outlined above against several different roms... I get "invalid command" at 2% every time.
How frustrating... I'm guessing the steps IMEIcheck provided to update the 'updater' don't work with roms newer than a certain version.
Can you ask your contact there if they can provide updated steps which work with newer roms?
Seriously... i just paid like 40 bucks to unlock my phone.
I was _already_ running an english rom after flashing using aserg's way (an older htc wwe release), so I'm failing to see any advantage to having cid unlocked my phone.
I don't want to give up... I've already spent contless hours trying to figure out how to get past every minor error...
i'm in the same boat as you dude. this rom worked for me, but again, its version 1.8.405.1. None of the newer ones work. I just emailed my contact and i guess we can only wait and see what he can come up with. Another thing, have you enabled wifi on your device? I have a wifi button on my Comm Manager but when I tap it it tries to launch but then nothing happens. I read about a registry edit to fix this but my registry was different.
Hello,
I've some problems to install many programs on my tilt, since it has returned from repair.
I've this message almost every time.
"Installation failed.
Program or setting couldn't installed. Didn't have the required system authorization."
Rom vodafone win6.1
rom 3.28.163.3 FRE
date 06/17/08
radio 1.65.17.54
protocole 25.83.40.02H
I hope you can help me.
Thank you !!
Fred
I would back up and just hard reset.....
It's not allowing unsigned apps to be installed. Search for Kaiser unsigned apps & you will find the solution in the form of a cab &/or registry edit.
thank you,
i found "Security Configuration Manager Powertoy for Windows Mobile"
but in security mode off, i've the same problem...