Hi guys, i'm sorry for my bad english.
I really like the precious software PQzII, it's essential for me.
Today I have flashed a new rom Aku3.5 based on the Helmi Rom, and PQzII don't work.
I can see the icon and i can see when the "ALT" and "CTRL" keys are pressed, but when i press another key to launch a shortcut, nothing happens.
On the program directory there is the two DLL and on "Def" directory there is "key.ini" reagular.
Anybody have same experience?
Thanks
My error, i'm sorry.
I removed the old registry key, reset, reinstall, and now is perfect!
Good, great, precious application! Thanks so much NICQUE.
Related
First of all the correct unlock utility can be found on this post:
http://forum.xda-developers.com/viewtopic.php?t=33796
The next most important thing is to know how to do a hard reset, you hold the "Communication Manager" and "Voice Speed Dial" buttons while pressing in the soft reset button(that is the small button next to the IR port), make sure to keep holding the two buttons after you press the soft reset. Then a screen will apear to have you hit the green call button to make sure you want to reset. This will format your user info and make you peform the startup tests again.
If you want to load an english rom, I suggest the Qtek one since it is very easy and all the software runs on the computer instead of needing to load files on to a SD card or the wizard. The whole application can be found here:
http://www.beyondthetech.com/blogs/kjam/
The link to the file is at the bottom of the page in the last blog. You will need to have Active Sync 4.1 for this phone and it will have to be working for this application to work.
Have fun everyone and I think this forum is great.
Sorry, but I can't find anything on this pages.Does anybody have an English Rom of HTC Winrazd???I have a HTC winrazd but it's Germany.I needed an English Rom.Sorry for my bad English!!!!!!!!!!
hi all,
Am also looking for english rom for wizard..I would very much appreciate if any one can help.
Tks isse
English rom here
http://www.beyondthetech.com/blogs/kjam/2005/11/qtek-9100-rom-available-for-download.html
i have an imate kjam & i was wondering...
what would be the best rom image for it? should i keep it on the imate rom or is there a better rom with better features for my kjam?
tx in advance.
Hi folks,
I made a "German Language Pack" (cab), which makes some german features available. See below
I am also working on a french version but I do nt have the french dictionary file for spell checking (mssp2_fr.lex) nor a french table for áà,... (sym.txt). If anyone could pm it to me I would be happy to update the language pack. Until then spell checking and symbols are as original only...
How-To:
1. download zip-file and unzip
2. copy cab-file to PPC
3. execute cab-file.
4. Softreset device
More information on the changes to registry and the included files are in the enclosed inf-file.
This tool was written for the Wizard device, but as the only Wizard-specific things are the settings for the hardkeyboard there shouldn't be any complications with other devices running WM5.
If anyone has suggestions for improving my little tool I would be pleased, if you could tell me!!
Hades.
new version with autocomplete feature added.
Still working on softkeyboard... - any suggestions?
hi hades,
does your little localizer work with the new aku2-roms? i have a himalaya aka xda2 with tofclock's 2.01a64wwe rom which is aku2. thanks for any info.
peter
i cannot report for any Himalaya images as using a Wizard (i-mate ROM 2.16). But the little tool does nothing system-critical. It only adds a view files and changes some registry settings, which are pointing to these files or concerning language settings. Therefore it should work with any WM5-device and -ROM, without interfering with any other abilities. I guess the settings concerning the hardkeyboard will just be ignored if the device does not have one.
For further information on all actions taken by the tool, please have a look at the enclosed inf file.
Hope that helped!
Hades.
transcriber doesn't work any more
I've just installed your french language pack on my Dopod with the latest Dopod rom 2.15.13.27 WWE and the transcriber doesn't work any more not in French neither in English. I get the message: Une erreur est survenue lors du chargement du moteur de reconnaissance de fichier.dll Vérifiez le chemin et la quantité de mémoire disponible.
I've followed your instructions and installed it successfully but I then got the message that the program was meant for an older version of WM and that maybe it would not work.
Is there a way to uninstall it without messing with the registry? My problem is worsened by the fact I can't manage a hard reset. I tried everything holding down the power button with the stylus in the small hole, sometimes also holding down the camera button at the same time, sometimes with the device turned on and sometimes turned off. No way, impossible to hard reset! Please help me, and thank you anyway for your work. I was very excited and I am now very disappointed.
yes it's a good idea
thanks
sorry 'bout that. I wasn't able to test the french language pack myself. I have overlooked the file and cannot imagine why it shouldn't work as it is similiar to the german one which is working quite well. Information on the changed registry settings are in the enclosed inf-file.
But anyway you should be able to uninstall it with the WM5 built-in uninstall feature (Settings --> System --> remove(?) programs). Perform a softreset thereafter by long pressing the standby-button (not digging the reset hole!)
To Hard reset your device you have to press and hold the comm and voicedial buttons simultanously, then press the reset button (small hole) with your pen, while still holding the other two buttons for a while, until finally you are questioned if you wan to completly delte your device. You have to confirm by pressing the green button. Make sure you have a bakup - I'd recommend SPB Backup.
Well, once again sorry.
Hades.
Thank you again for your kind answer. Actually I had to reflash my rom cause I couldn't do any hard reset. I was stupid not to think of removing the program first, since I didn't think it was a "regular" program. You mention the comm and voice dial buttons as two different buttons but actually on my Dopod it's only one button. Did you mean then the power and voice dial together, which coud make sense and which I didn't try cause nothing like it is mentioned in the user guide. Do you think I could have got the problem with your program because I used the stylus in the hole to soft reset my device after installing the french package. It is the procedure mentioned in the user guide for soft reset, contrary to what you tell me now. Thanks again
oh ok - I was assuming you have a HTC Wizard (don't know the dopod model number). If it's not a Wizard I have no idea how to hardreset it. But I hope you're using WM5, for my little utility is for WM5 only.
If you do a soft-reset after a change of the registry using the reset-hole the changed settings may not be stored on your device. That is because the registry-file is not immediatly updated after the changes, but stored in a temporary space and later (who knows when!) written to the file. So if you reset it by hardware-button the changes are still in the temporary space and therefore gone after the reset. If you do the reset by using software-reset function (provided by e.g. SPB Pocket+ or magicbutton) or simply switch off the device using the standby-button, the temporary space is written to disk before shutting down. That's it.
À bientôt,
Hades.
P.S.: I updated the language pack, cause I found a minor difference to the german one. (Compare inf-file) But I can't tell, that that was the problem.
My Dopod is a 818Pro with WM5, so it's a Prophet and practically the same as a Wizard, as I've seen in the forum. What you say about soft reset is very interesting since I haven't seen it discussed very often in this forum and i searched it quite thoroughly. Have you tried removing your program through the regular WM5 procedure? You seem to imply that the registry was not changed after my soft resetting with the hardware button, but it seems strange to me since after resetting I got the french warning I mentioned in my first post, and it was the first ever message in french from my english speaking device! Some change had definitely occured in the registry or somewhere else. Thanks again
well. I tried to remove and it worked. Concerning your registry I don't know wether it was changed or not. Depends on many things, I think.
Sorry,
Hades.
I've just installed the German package on my Himalaya device with English AKU 3.2. It works Thank you Hades!
hello Hades77
Actually i successfull changed hardware keyboard but also spellcheck, dictionnary (i think even T9 but i'm not using it) and special characters to french and it's compliant with 3.2 rom(thanks faria). As i can see you package does not include those feature yet ... Are you interrested in getting those files and including them into you cab ?
thanks a lot!
Hello hedes,
i just installed your german cab! it seems to work perfect on my phone.
THANK YOU VERY MUCH FOR THIS, IT MAKES LIFE EAYSIER WITH WRITING WITH AN ENGLISH ROM
Hi,
Is there an spanish version for TyTN?.
Regards,
Taguapire.
Hi , i was wondering if there is way (something like a tutorial) that I can build my own language pack?
I have a Wizzard (Qtek 9100) with the original QTEK rom (in Greek) and I am trying to fit Faria's 3.2 ROM in my PPC but i Need Greek Language pack . Is there any way you can help me with that?
thanks in advance
new ROM
I tried to install your german language cab, but it doesn´t work. I got the new ROM from Faria ( http://forum.xda-developers.com/forumdisplay.php?f=259).
Now i donn´t know how to go on.....
Thanks for help
hi,
i have a imate pda2k with qwerty keyboard.
wm6 doesn't recognize special characters like "." "@" "," and others.
with my old wm2003 i had to install after an hardreset a special cab to solve the problem.
i have tried this cab also in wm6 but without results.
does a fix exists ?
ok i have found the right solution before posting my question here,
http://forum.xda-developers.com/showthread.php?t=365832&highlight=qwerty
but i forgot to tap "exit" at the end of registry edit. so i have not saved the new registry key.
sorry
Hello...
A small app in attachment. It SHOULD add possibility of configuring 3 more buttons
of any WM6.1 Samsung SGH-i780...
Unfortunately, only application shortcuts may be assigned (namely no <command> commands)
any chance to change the hold red button? ive been wanting to remove the keypad lock and change it into s2u2.. so far no software can do that
patch does not work
Well, it works in my case
edited a few things in cab to allow installing.. now it works!
thanks _TB_TB_.. this is a great addition
still asking if its possible to also change the keylock on the red hold button?
None I'm aware of...yet. Patience
It's great stuff, work fine BUT
"Start Hold" is not working on my BKHE1
can't install this on my J2/I2 version i780.. something about system permission in the installer cab.
_TB_TB_ said:
Hello...
A small app in attachment. It SHOULD add possibility of configuring 3 more buttons
of any WM6.1 Samsung SGH-i780...
Unfortunately, only application shortcuts may be assigned (namely no <command> commands)
Click to expand...
Click to collapse
Good Work!
ejoya said:
edited a few things in cab to allow installing.. now it works!
thanks _TB_TB_.. this is a great addition
still asking if its possible to also change the keylock on the red hold button?
Click to expand...
Click to collapse
Hello.
Can You post that changed cab (of course with TB_TB_ premission)? I have also problem with installation (lack of permission). Maybe it`s a problem with my official I1 WM6.1 ROM?
I have found that Your CAB can be installed, but there is some conflict with RealVGA, becouse without RealVGA it instals and run properly, but after instaling RealVGA system don`t permit to install it.. Weird..
WM 6.0
How to install on WM 6.0?
Best regards.
thank u for this fantastic hacks!
never try this patch to russian layout+EFN 5.0 - cos u you will need to hardreset.
Nice Hacks
Thank you, for the hacks
I'm also getting the permission error whenever I try this. I'm using EFN's 96DPI 5.0 Standard ROM. How do we fix that? I would really love to be able to change the End Key Hold short cut to point to the regular task manager 'cause the Samsung Task Manager looks funny when used on a 96 DPI ROM.
Thanks!
*nevermind - problem solved*
Can someone please post solution for the permission problem? How did u fix it?
Author please post solution to fix permission issue.
Thx
Please Vote : http://forum.xda-developers.com/showthread.php?t=923045
and reply too ! thanks
Hi all:
Seeking some help regarding the keyboard fix for tilt2. It was working fine for me when I use one of the official EUR 6.5 ROMs. I just flashed to a 6.5 WWE Hong Kong ROM with CHT and the cab is not working. I believe possibly because of the different IME for Chinese or the newer version of the ROM?
Instead of a cab is there some keys I can change/add to registry to fix that problem? It's driving me crazy not able to type properly...
Thanks in advance!!
I eneded up using the hwkeyboard cab to get the right FN and shift key....then I added takrim's keyboard control and reassigned all the keys to the correct place. Here's the XML file you can load to get all the keys...unzip and open keyboard config -> load -> and choose the xml file.
thanks for the xml, im having an issue with my numbers and symbols not working and this one seemed to remap it correctly when i put it into the keyboard config. However, the OK button is the FN button, and the FN button is caps lock, and im not sure what the capslock/shift button does (but it doesn't do anything when i press it)! . Is there a way to swap them in the config? i tried to do it myself but could only find how to create a rule and i dont think thats correct. Thanks!
install Toleraen's Tilt2KWKeyboard cab....for my initial testing it fix the FN and shift key but nothing else...
so now I have both the hwkeyboard cab installed - to fix FN and shift. Then use keyboard config + my XML for the rest.
Give it a try
Again. All the stuff you need.
I have downloaded these three files, but I do not know how to load them into my Tilt2. They don't unzip to .cab files. Could anyone help me with some instructions here?
Thanks in advance
RQDHD2 cab
Iam now using this fix and it worked for me and i can still sync with outlook
When i use HW keybord SIP keybord wil also hide
Works beautifully, thanks!
I got to modify your 'Keyboardconfig.xml" one-by-one as it is not working for mine. This may due to different ROM version. Anyway, attached my copy of .xml file & I'm using WME version of ROM. Hope this help those having same problem.