Hi there,
I got a T-mobile MDA for almost a year now. The housing of it is actually a terrible seeing, therefore i had ordered on ebay a housing and got i today by mail. Happily i opened the mda, using the manual of this website and removed everything step by step and installed the new housing.
But here it comes. Everything is installed, turn on the sing louds of a soft reset and the screen doesn't displayes anything. I tought it was my mistake, that i might forgot or had not plugged something the right way in the MDA. Once again i opened it and checked everything, but without succes. The screen does only shows some strange lines with no light, it's verry strange. Can someone help me? It has to be fixed as soon as possible! Thnx in advance
no replies huh? what did it turn out to be if u fixed it, i dont thinkill get replies too..
It's either you have the wrong type of screen or some loose connection.
Related
hi...
i have o2 mini s..the problem is that on several occasions multiple black lines come on the left half of screen and graudually the whole display becomes dull...it comes back to normal by switching off the light and then again pressing the power button...when the display is getting dull i can figure out the phone is working cause of the sound i here on using stylus ans also when the screen is alright the aplications i had opened blindly r open..
have tried various rom upates but no benefit...
please help with a way out of this serious problem...
thanks...
Sounds like your device is not liking life.... did you drop it before this started happening?
I assume you have had the phone for less than a year so try returning it and see what o2 say.
thanks..
i got the cell secondhand....and no warranty too..can i please no what the problem is and how much will it cost to get the screen repaired..
I've got the same problem here with my UK T-Mobile MDA Vario.
I've contacted T-Mobile through their website but have received no further response after telling them that I bought the device from Ebay.
Can anyone suggest as to how to fix the problem? Thank you.
buspbp
Guys I recently purchased a brand new SPV M600 from ebay and when I say its new, trust me because it was completely sealed and no marks/scratches on the M600 plus all the wires/leads were sealed etc, and he even sent me the invoice from Orange stating the date of purchase, accidentally I think as it contained his home address and telephone number!
Now when I first turned it on and charged the battery etc, I had a little play with it and it all seemed fine. I took it to work with me that day and at work it started to act strange.
First it started by soft resetting itself while I was in the SETTINGS window just tweaking all the bits and bobs to my liking. Anyway it started up again and this time it seemed ok. I tried opening all the menus etc as I had done before but it didnt soft reset again which was a little relief!
It worked fine for the next 10-15 mins after which I put it away and started doing some work which is what I should've been doing in the first place!
I got home in the evening and sat in from of my PC and turned on the PPC and this time it started at the Splash Screen instead of coming out of stand by! Weird as I didnt reset the device and its on Button Lock so it couldn't have happened by accident whilst being in my pocket!
The only problem was though, this time it stayed in the splash screen and wouldnt go past that! I soft reset it again but still no luck!
So I then went for the kill and did a hard reset, not that I lost anything as I didnt have any information on there. After the hard reset, it goes past the splash screen on to the blue nice looking Windows 2005 screen but it stays stuck there!
Did a hard reset again and this time it worked but it crashed when it was installing the customisation tools! It needed a soft reset again! After that it seemed to work ok... only for a little while before it started all over again!
Now this was the original Orange Rom and I have no idea which one it was and I didnt care because it had to go!
I came here and found that our friend Jester was upto his old tricks again and had released a modified version of the Qtek Rom, so I went for it and installed it without any problems (except for his very original spash screen which scared the hell out of my little sister and I didnt find it very comforting either but soon had it changed with Jester's HTC Splash screen).
But unfortunately the problem still remains and the same thing keeps happening. It soft resets itself once in a while and when I do a hard reset it gets stuck in either the Splash Screen or at the next screen which is the Windows 2005 blue screen.
Its like trial and error really, when you guys want to hard reset your prophet all you have to do is do it once, but I have to keep trying at least 2-3 times.
In some cases I need to do a hard reset and then a soft reset soon after when it gets stuck in the Windows 2005 blue screen! And even then its not over because when it gets to the installation of the customisation software, theres a good chance it'll crash there and will need a soft reset!
I tried to install the original Qtek Rom, the one which Jester modified a little but it wouldnt work and I'm guessing I only have the CID lock to thank for that! Mines a G4
Any idea guys? I'm totally screwed here as I cant send it back to the guy I bought it from because I have changed the Rom and thats not good because he cant send it back to Orange to get a replacement! I wish I hadnt changed the Rom and just sent it back to him but I thought it was a software issue.
I'm not convinced its a software issue anymore though!
If you made it this far then I apologise for making this post too long (was longer but I had to to edit out like 1/4), and bloody hell is that the time!
Anything from anyone would be much appreciated.
All the best.
My friend you should try to format your phone and install new operating System...Similar problem happened to me (mine just freezed and I had to reset it) so the new OS is the solution of your problem...So when you do that,tell us if everything is ok..And one more thing---This little mobile device is THE BEST you'll ever get for that amount of money-so keep it and take care my friend...
Greetings!
Alix, thanks for your post. I'm not too sure about that because like I said, it came with the original Orange Rom and even then it was like this, and after upgrading to the latest Qtek Rom, the problem still continues. So somehow I dont think its the software. I mean I hope it is the software as thats an easy fix if I can somehow get my CID unlocked and right now thats not possible on G4 Roms, unless I'm wrong and falling behind?
I have a feeling its the hardware and if it is then I'm screwed!
Thanks for your reply and hope to hear from others soon.
Have you tried to replace the battery? some times the battery causes this kind of behavior when its not supplying enough power to the phone.
try to HR with the phone connected to a wall charger (not to pc) and see how it goes.
if it reboots OK, so probably its a battery issue.
Shayd that was good thinking and I tried it right away but unfortunately it wasnt the case. It still needed 3 tries... one hard reset followed by two soft resets before it went past the Splash Screen.
I've just about had enough with this thing!
Thanks nonetheless.
How To Reset SPV M600
hi every one,
can some body tell me how to hard reset SPV M600
It's On ORANGE
IPL 2.10
SPL 2.10
infozohaib said:
hi every one,
can some body tell me how to hard reset SPV M600
It's On ORANGE
IPL 2.10
SPL 2.10
Click to expand...
Click to collapse
RTFWiki!! It's there!
hi , I have spv m600 from orange and I did something to change the original room , and now it work perfect here do that way
first thing unlock sim using this link to download unlock tool.
http://forum.xda-developers.com/showthread.php?t=300062
After that you can download room from this page to updagate your phone
http://forum.xda-developers.com/showthread.php?t=297489&page=3
Download: LvsW WM5 NVID(no vendor) [RUU-Prophet-220734-2207114-024721-NVID]
That room work for mime . you should try it
I hope .It ll help you
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
Hard reset SPV M600.
How reset SPV M600?push buttom cam and buttom comm manager(both two buttoms left ) and the reset with the stylus.keep the two buttoms pushed till you get a message then strike any key to quit.
Caution:
you turn off your pda before doing any hard reset.your pda will install default parameters.
Save your data before any hard reset.
good luck.
phew! i just went to sell my SPV M600...as its being doing my head in an is long overdue for an upgrade. however, it decided to die in the shop! i was offered 50quid too, so i wont be goin back there, but i needed the money to get me through to pay day, (its something ive been puttin off doin fior awhile, but when moneys tight....) id just like to say a huge thank you for lettin me be able to reset my own phone, the Orange shop wanted £100 for a replacement (screw that!) an the car phone warehouse wanted to take the phone, send it to sweden, mess about with paperwork, an probably wouldnt have give me back till next year.
so, Thank you
P-Swish
PS...does anyone have any experience/news on the new Nokia N95? im lookin at upgrading to one, an well, if anyone has any bad experiences/insider info pls email us
HI guys!
Help Needed Big time.
I am using an O2 Mini s from the past 6 months. Everything was running smoothly until one day when the screen started getting white. Initially the problem would persist for a fraction of second a soft reset would rectify it. Now the problem has worsened. The entire screen is white i cant see anything on the screen but can receive calls. At times i can see a faded owner information but nothing more than that.
Could you guys please help me? I dont know what the problem is all about and how to fix it. I love this phone and dont want to sell it.
PLS HELP!!!!
Cheers
have same, any ideas?
looks like a broken screen digitizer. You will have to send it in for repairs probably.
My 9090 also had it and it was 100Euro already only on parts. So didnt took the matter and now have a p3300.
hey bro !!
i got this imate jasjar 2 years back and i love my uni allot.
need a help from you bro...i am new to all these hav been goin through 100z of threads everyday bt not gettin my answers i hope you would help me out..!!
actually my jasjar suddenly started behavin weird it switched off by itself n wen i switched it back on after the windows mobile screen shows up my jasjar gets a dead blue screen n nothin happens.
tried to connect with active sync 4.0 and 4.1 bt it would not respond and show dat the phone is not connected.
i came across a thread in which a guy said to press bright light button + power button+softreset it sent my phone to a usb mode
then i used mtty tool and its command task 28 to check if my jasjar is wasted or still breathin lucky enough it dint give a formatfaliure msg and there were some steps i followed .
everything went as told n now m stuck on where to get official wm5 for jasjar and how to get out of the usb screen and how to flash the rom...??
please help
To exit boot loader mode: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
With regard to restorig WM5 - I have the official O2 XDA Exec files for their last software release. But I think you said your's is an iMate.You could see if the iMate version listed here: http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades is still available - if not maybe someone has a copy somewhere.
Hope this helps.
hey dat was gr8 bro....bt m still stuck with finding of wm5 for my imate ...!!
i found i mate upgrade bt when i clicked on download an error popped up "550 or 505 change of directory sumthin..."
well i followed the instructions u sent me it worked well bt still need to flash with wm5 ...!!
any chance of u or ur known havin a copy of wm5 rom
its been weeks and everything is gettin hazy ur help would be appriciated allot
thank you so much ..<!!
bro thankx for help i actually flashed my uni with kdskamal cooked wm5 bt my jasjar still gets dead on a greenish screen as it used to get before in blue screen wht m i supposed to do...??
Hi,
Try flashing with a WM6 rom (Tomal's ROMs are always good) and see if you get the same symptoms.
If you do then I suspect that you have a screen/cable connecting screen problem.
But lets rule out software first.
greetings bro...!!
i was up all night flashing wms
i used mtty software so many times that its commands are like hard weird in my brain cant get them out now....lolzzz
my stubborn uni was still stuck on the same dead screen but the only fun thing was that every time i flashed a new wm it used to get stuck on diff colours blue red green black...lolzzz
i scratched my head and i scratched my ass to an extent that i guess it started thinking lolzzz
i got some nice screw drivers and opened up my uni..
damn dis thing is wicked and messy it has things dat i dont know about n havnt even dreamd of in my stupidest dream i hav been lost in a computer motherboard with some good virus as my friend n some bad scary virus but in my uni motherboard i would neva..!
so i just fixed it back...n it worked for a while n den i dont know what tickled its ass.
busted again...!!
i guess ill hit the HTC service centre.
thanx allot bro
respect for ur effort and help...
Hi
for some strange reason the option "incoming com port" in the blue-tooth setting on my jasjar has disappeared. i was wondering if anyone else faced the same problem or if there is a way around it? editing registry n stuff.
because of this the previously paired devices are working fine but the new devices are unable to search the serial/com port facility on my uni.
i have tried resetting but still no luck.
any suggestions?
also i would really appreciate if someone could give me a solution for reading arabic and other such languages on uni.
(btw i am using i.e.TML 8.5 Rom and when i installed it at first the functionality was present so it cant be a ROM issue.)
...
lol... sorry abt earlier maite! i just realized the ridiculous thing i just did. i was supposed to post the reply to ur prob and then start with my sad story but somhow i managed to skip step one .
i m not expert on the device but i like it very much so i when i got one with my o2 contract i bought another one sim free just so that one would keep other company. as far as ur issue goes i have faced almost the same prob in the past and the solution was
1) rotate the screen 90 to get acess to screws at the bottom of the screen.
2) open the screws screws ... btw u might wana check if they are properly fastend before you try this step as i observed that if the screws are properly tightened this problem may solve itself... carrying on open the screws and that would detach the screen from the hinges.
3) where the hinge comes off strip open the cover a little bit and you will see two connections, one for the backlight and one for display (just like any other LCD screen.
4) press the big grip like thingee i.e. display connector with a flathead screw driver to assure they are properly in place. because in my case the connector had come off and hence was causing the system crash. although in my case the screen was only going blue after a while not the whole color palette.
just try if this one works because i m not sure if imate people are going to be any help in this case. i tried calling them a few months back for the lenscover and they said they dont support this device any more :S.
Hi All, I think I made a mistake... My wife's friend was going to Devon on hols and I lent her my Ameo (for TomTom) I showed her how to use it for everything else too. I heard nothing more until on her 3rd day she text me saying she had put it on chg over night but it wouldn't turn on!! I text her with loads of things to check and try, including a soft reset but nothing worked!!
I ended up telling her to leave it and I'd sort it when she got back. However yesterday I got it back and I've tried everything... soft reset, hard reset, with it plugged in, with it unplugged, with 2 different chargers and 2 different batteries!!
Nothing! .. a blank screen?
Even when it's plugged in there's no orange light round the joy stick? so I think it's more than just the display ??
Has anyone got any ideas or suggestions?
Many Thanks
Tim
Please Help
Can anybody help me with this?
Cheers
Tim
maybe its dropped and you might have to open it and check it or send to technician or its the main fuse probably a surge blew it
Anyone want it?
I've taken it to bits and now managed to put a tear into the LCD micro strip!!!!
I've removed the microdrive (personal data that I can't delete)
Does anyone from XDA Dev want this device for parts??
Cheers
Tim
hi
i can do with the parts can u send me an email on [email protected] if u still hv them
...
same here
[email protected] if they're still available....