Does Disable GPRS Auto Connect work with the M3100? - 8525, TyTN, MDA Vario II, JasJam General

As the title says really.
DisableGPRSAutoConnect.cab can be found here.
Thank you.

Related

I don't get it .. WLan and GPRS ...

Hi folks,
after reading a lot of threads, i still don't get it how to configure what i want:
I got an advantage WM5 and want to use GPRS on the road and WLan when I'm at home. The question is: When I'm at home i have both activated, but i just don't know wich one is active.
Is there a setting like "preferred connection" ?
I have a 30MB GPRS option in my contract and i don't want go blow it.
Any advices fo me ?? Thanks in advance,
HereĀ“s one way
Try Start>Settings>Connections>Connections>Advanced>Dialing Rules

Disable data connection

Have installed Tom Tom software which works OK but evertime I use it it makes a data connection via Edge or gprs.
How can I stop it?
The same thing happens if I have a wifi connection to my network it also tries to connect via Orange.
How can I stop this as I do not want an unwelcome bill in a while?
If it means disabling something so that I can not connect to internet via gprs that would be fine but seem to be unable to find a setting.
Thanks
Hi
I no expert but sounds like AGPS kicking in. Do you have Location Settings option in "Settings\System"? If yes you can turn this off, if not then dunno, maybe someone else can guide.
You could also install the "HTC No Data" utility, search the threads here or Google it.
Cheers
Proper Job!!!
Seems to have stopped it dialling up with TOM TOM
Just need it to not dial up when using wifi now.
You may wanna try searching for and installing MoDaCo NoData... Works great for me...
Sussed it.
In network settings instead of havung it set to Orange Internet set it to Work Network and works OK.
Proper Job.
izzyzc said:
You may wanna try searching for and installing MoDaCo NoData... Works great for me...
Click to expand...
Click to collapse
Yep, NoData is a great app.
Blocking the internet connection. And saving some battery..

internet access problem

Hello there, i finally got a 3g sim(by TIM Italy) for my topaz..i use it as a modem for my laptop and it works very well..but i don't have internet when i use the phone standalone Any clues?? I used the automatic config and i got a correct connection, in fact whe i want to update weather for example icons on the top bar start to change as if the data connection was correctly invoked..but i get a connection error pretty soon, same for Youtube or opera!!please help
hello,
I have a different problem. My sim card was broken so i got a new one.
I have the 3G account but i'm unable to see the 3G sym. Allways the E is shown.
How can i get the 3G symbol?
Check that use proxy is not enabled in connection setings for your internet.
pa49 said:
Check that use proxy is not enabled in connection setings for your internet.
Click to expand...
Click to collapse
Thanks for your reply. I tried but when i unchecked the "use proxy" thing, WM is re checking it again.
Maybe there is something in the band settings that i miss.
@opensea: i'm afraid pa49 was answering to my thread, your problem could depend on the coverage in your area.
@pa49: if your answer was for me i checked that, thanks anyway.
Ok, now i know it can work flawlessly doing a hardreset, so my fault..will have to put all the stuff (well not all,i guess) again. But gosh do i have to check if it works even if i put stuff like tomtom or sportypal back on? I'm sure it's either HDTweak or AndvancedConfig, i unistalled them but no use. I guess they leave "bad" settings for my purpose even if unistalled.
Well, bye

Wifi problems

Hi! Sorry for this message, but I really didn't find a topic that would answer my question. My phone shows that the wifi is connected to my home network, but I can't acces any internet pages, or even update weather. My laptop which is also connected to the home wifi is working properly. I just recieved my phone from the servis, I explained the problem with the wifi, and they said that it should work OK, and that there is no problem with the hard or softwear!! I would appreciate any help from you guys. Many thanks!
pinot112 said:
Hi! Sorry for this message, but I really didn't find a topic that would answer my question. My phone shows that the wifi is connected to my home network, but I can't acces any internet pages, or even update weather. My laptop which is also connected to the home wifi is working properly. I just recieved my phone from the servis, I explained the problem with the wifi, and they said that it should work OK, and that there is no problem with the hard or softwear!! I would appreciate any help from you guys. Many thanks!
Click to expand...
Click to collapse
The issue is probably in your connection settings, Settings\Connections\Connections\Advanced\Select Networks.
Can't tell who your provider is so can't help you from there.
My provider is SIMOBIL. But why should my problem with wifi connection be connected to my provider? Isn't wifi totally seperated from that? Cause my SIMOBIL network works just fine, it's the wifi that says it's connected and doesn't work at all. Thanks!!
Make sure that your IP and DNS settings are correct in the D2. Also any encryption as well.
Are you connecting to a router? If so, make sure your security settings are correct, and allow the D2 to access the internet, ie, allowing the MAC address.
I need to enter my MAC address in my router and can't find it on my TD2 (model T5358) and my manual is only in Chinese, so that's no help. I searched "MAC Address" in the topaz fourm but didn't see the path to follow to find it. If you know how to find it, any help would be appreciated.
Thanks.
MI 99XPL said:
I need to enter my MAC address in my router and can't find it on my TD2 (model T5358) and my manual is only in Chinese, so that's no help. I searched "MAC Address" in the topaz fourm but didn't see the path to follow to find it. If you know how to find it, any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
Turn on Wi-Fi, then Settings\Connections\Wi-Fi\Advanced\ (or Comm Manager\Wi-Fi\Advanced\) then switch to tab Advanced
pinot112 said:
Hi! Sorry for this message, but I really didn't find a topic that would answer my question. My phone shows that the wifi is connected to my home network, but I can't acces any internet pages, or even update weather. My laptop which is also connected to the home wifi is working properly. I just recieved my phone from the servis, I explained the problem with the wifi, and they said that it should work OK, and that there is no problem with the hard or softwear!! I would appreciate any help from you guys. Many thanks!
Click to expand...
Click to collapse
i experience the same thing, but after i change the router WEP encryption key from hexadecimal input back to character input, it works flawlessly. think phone just not support hexadecimal encrype key??
Try to set the Power Management slider to Best Performance in the wifi section. I experienced that some ROMs need to be set like that to work, otherwise the symptoms are like yours: phone "looks" connected but no traffic is going on..
What protocol/standard is your wifi?
I have notice that since I replaced my wireless G router with an N router (same brand - D-Link), that my connection only lasts for a few seconds while I'm active. After a minute, or any delay in activity, my connection is invalid and I get 404 errors. I had no trouble surfing for hours before, and my laptop seems fine, so I'm not sure where to start troubleshooting.

Wifi Preferred over 3G/Operator

Hi there!
At home I have a Wifi connection, and obviously, I would like my Leo to connect to the Internet through my Wifi connection if available. If not available (because I'm somewhere else) then I'd like to get connected through my Mobile Operator.
The thing is: it would try to connect via WiFi and if that didn't work it would try the mobile network.
Is that possible? I mean, is there a setting called "Wifi Preferred over 3G"?
I haven't been able to find something like that.
Thanks in advance.
If this option does not exist, do I have to believe that the HD2 has what I'm asking as default?
Only way would be to have WiFi turned on constantly so when you're in range of a network it'll connect to it...battery would die, though
i believe there is a mortscript or some little app that can control the radio - when you are near your home's 3G cell-site it can run a script to enable wifi to pick up your home connection. i cant remember the name, but it is out there!!!
hi,
for automatic switching look out for apps like phoneweaver, gprofile oder phonealarm. i think they all can do the job for you, and a hole bunch of other things to.
regards mad
Thank you! I'll have a look at these programs.
Easier way to see how it works: I installed Spb Wireless Monitor 3.1: It tells your data transfer under Wifi, GPRS, USB, WAP...
I'll post an answer when I got everything checked.
Cheers!
NoData
Don't have my Leo as yet so not sure if it'll work, but try this NoData.
It works on the Blackstone...
Try installing WMLongLife.
yeap... I agree...Spb Wireless Monitor 3.1 is what you need bro...

Categories

Resources