Hi all,
Is it possible to disable (registry tweak or other ?) the blue led of the Artemis' trackball ?
Thanks, Laurent.
...and/or all the other leds? (allledmgr entry in registry does not exist!)
Yes all the LEDS would be great too...
We can maybe find a key that defines the time back-light LEDS are illulinated ? And set the time to zero ?
No idea ?
Ok i will open
blue led and no screen
the blue light is a safety lock i fixed on magic by plugging into charger turning off removing batter led went orange then plug battery back in then it restarted and turned on hope this helps
Related
Is there a registry key where we could change the green led to a blue led? I don't use blutooth much anyways so I thought I could have it flashing blue instead of green; just looks cooler imo.
Thnx=)
I don;t think this can be done; So sar no-one has been able to find a hack to disable the blue led for those who don't want it, so if we can't turn it off I suspect we won't be able to hack it to operate for anything else either - I suspect the Blue LEd is hard wired into the BT radio unit and not controlled by software at all. THat way, when the BT radio is on, so is the LED.
This certainly seems to be the situation. It is notable that when BT is enabled, the blue light flashes independently of the green/orange light.
The only solution would be to replace the LEDs, which although tricky should be quite possible.
Skip
This is funny. I'm exactly looking for the opposite: i.e. to restore my flashing led.
I don't know why and which program caused it, but my led is not flashing at all and I don't wanna hard reset.
what do those lights mean?
blue blinking = bluetooth?
orange blinking = recieved a message or call?
green blinking = radio on?
permanent blue = ?
permanent green = ?
permanent blue = ?
and whith indicator for battery and power?
thanx
well permanent orange is charging
and permanent green is fully charged
that's about all, haven't played w/ bt yet
Is it possible, with a registry tweak perhaps (?), to swap the green standby led with the blue one?
Resulting in that you have a blue led blinking instead of the green one..
There is a tweak to turn every led off, but I havn't seen a tweak for this anywhere..
kick
Hello all,
so once more a question i have no answer for: Is there a way to stop these LEDs (telefon - red/orange and bluetooth - blue) falashing?
the background is that the universal is in my room the and i dont want to have dicso the entire night..
Any help is awesome
JohnR
HKLM\Drivers\BuiltIn\AllLEDMgr
Change the key Index to 0 and this will disable the LEDs for the most part.
I find that BlueTooth still flashes, and when I'm on AC the orange/green LED works and stays on until a power on/power off has happened.
I haven't seen the red LED, nor the WiFi, so this solution is 50% effective.
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
This is not a led is a light sensor.
akhoury said:
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
Click to expand...
Click to collapse
The one next to the earpiece is a light sensor.
The other flashes green for missed event, stays green for finished charging, amber for charging, and flashes amber if you're low on power.
Is there a registry hack to get the "old" LED behaviour? (Cell locked in=Flashing green, Notification = flashing yellow, Bluetooth = flashing blue etc.)
I don't think there is a solution for this (yet).
in anycase, it is only a bi-colour LED - ie Amber and Green - no blue.
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Dani3l3 said:
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Click to expand...
Click to collapse
Start, Settings, Personal, Sounds & Notifications, Notifications, Messaging: New text message, Flash light for....
That LED is so tiny and dim I find it's easier to just hit the power button and look at my screen to see if I have missed calls/texts/etc.
well theorticall you woud have to seek out the powr button with eyes first
kdding
Thanks.....
My HD have an Italian ROM and the translation is poor...... nothing about "led blink"
I've resolved checking a flag translated as "turn on screen if incoming message".........
I think i'll try a WWE rom.....
Thanx a lot
dani, that is the correct option. Italian translations suck
Hi!
I don't know if this is by design or it is a problem with my device but I found very strange that there is no led light to show me if I have signal or not or if there is an event. The led from the power button goes orange when I charge my phone and continuously green when fully charged. But when the device is disconnected from power source the led just goes off and stays like that even if there is a missing call or an SMS. It at least should blink green to show that there is signal. It is the same for you? If yes, is there a way to turn on the led?
I am using Dutty's ROM 2.1.
Thanks!
It does...
Change your sounds and notifications settings.
Sorry to insist but can you be more speciffic? What should I change there? For intance on the Missed Call I have selected "Display message on screen" and "Flash light for 30 minutes".
I am also using PhoneAlarm and this one is set to flash the led for most of the events. But it does not work either.
Thanks!
yes, you change to "flash for xx secs" for xx event
but the rest of the time it is off
its only 2 colour, ornage for charging and green flashing for events... .no blue for BT or steady on etc for signal
As I said, it is already set like that.
The LED is located on the power button.
Buggered setting i guess, try turning off the flash setting then try a reset and then turn back on again,
I will do that, thanks!
jonajuna said:
yes, you change to "flash for xx secs" for xx event
but the rest of the time it is off
its only 2 colour, ornage for charging and green flashing for events... .no blue for BT or steady on etc for signal
Click to expand...
Click to collapse
Does HD has blue LED for BT ?? mine doesn't shows blue LED for Bluetooth ( Only Green and Orange LED found. HTC original ROM 1.19 something). Am I missing something or there is NO blue LED like Elf/in
Can anyone confirm / clarify ?
Thanks ahead
Just tiny, faint green/amber LED. No Blue.
sschrupp said:
Just tiny, faint green/amber LED. No Blue.
Click to expand...
Click to collapse
Thanks for the reply. Blue LED would be much appreciated though. ( it looks cool on my Elfin)