Related
Hey. I've tried and tried, but .............. i can't get this thing working :evil: .
If anyone has made this work - pleeeeeeeeaaaaaaaaaaaaase share your settings!!! I know, that a lot of ppl will send you a lot of happy thougts...
Thanks
- Torsten
http://erhverv.tdc.dk/artikel.php?dogtag=tdc_e_mobil_mms_mo
here are the normal tdc settings
the telmore would most likely be the same maybe with a different
mms server ip
i sugest you try and contact telmore for more info
Well. I've tried this guide, but I dont get the MMS option on the Today screen. I'm stuck - only having the "No unread messages" line. Any suggestions? Why doesnt the MMS option pop op on the Today screen?
well my qtek2020 have an item on the today screen just like that pdf describe at tdc's site i would asume that orange would have a program much like it
mms are not like sms and activsyncmails and normal mails
they dont pop up under messengers
my mms today screen item opens a program called mms composer made by arcsoft soware which handle the mms sending and recieving
Do you know where i can dl the software from? I think, thats what I need. I dont think Orange has included this sw.
This is how to do it:
1. Install the MMS application - download default_mms.zip and rename it to default_mms.cab. Then execute it on your M1000
2. Create a new Network - in my case it is called Telmore MMS
3. Create a connection for your new network.
Name: TDC MMS
Modem: Celluar Line (GPRS)
Access Point: mms
3. Start the MMS app and configure it to use the network Telmore MMS
I use different networks to avoid having to change the default modem each time I switch between MMS and GPRS browsing.
Regards
Michael
Thanks! I'm able to test it tonight/tomorrow. I'll post my results (luck ) with this one.
Just a newbie question. How do I execute the renamed .cab file?
cab files if renames can of cause be executed by you renaming them back to cab
if they are cab then using total commander give you the option run which execute and install the cab file in the process
It appears this nice device (or at least all of WM5 devices) are not yet enough considered from SP as I cannot find any setup and/or settings for MMS and WEB connection settings anywhere...
www.clubimate.com only supply any kind of settings for any other SP but VODAFONE ITALY...
Their support (I-Mate) is also not present (I even tried calling them while in Dubai with no luck).
At VODAFONE Customer Service there are only chances to use the automated answering system or the website and again no one of them considers WM5 devices...
ANY HINT ???
With manual settings I entered I can do MMS -OR- WEB but I cannot get it configured to "automagically" use one of the two when needed. I always have to manually switch between them... :-(
Again: ANY HINT ???
Thanks a lot.
Hi Michele,
I am Italian too. Why do you switch them manually? In Connections/Advanced, the default connection should be not be the MMS one, but the internet one (APN: web.omnitel.it). The one used for MMS will be defined here but NOT selected as default. This needs to be indicated in MMS configuration in the Messaging application.
The problem that I have (with a Worldwide English K-Jam) is that I just can't make MMS work. I have tried all settings based on Vodafone Italy indications, but no joy.
Would you tell me your detailed settings to make it work?
Thanks.
Massimo
..
Thanks for this!
This is however not suitable for me, as I live in two countries (UK and Italy), and I do not want to hard reset just to fix my Italian MMS settings.
Would you be able to just give me your Voda IT MMS settings?
What I have done is:
1) Created a new connection with APN = mms.vodafone.it (everything else is default)
2) Created a new set of MMS settings in the MMS application, with:
Gateway = 10.128.224.10
Server = http://mms.vodafone.it/servlets/mms
Port number = 80
Connect via = the above created connection
WAP version = with this I am unsure, I tried both settings, but no joy.
With these settings, the phone tries to send or retrieve MMS's, correctly connecting to the APN and exchanging data. However I always get a vague error message in the end.
Can you let me know what you have done differently?
Thanks.
..
Many thanks for this!
I modified the config based on your comments. At a later stage I also went into the registry and manually modified some settings that looked different in your list. Still no joy!!!
:roll:
I am particularly puzzled by the Profile parameter, pointing to an XML file in a website. You claim this is very important. The default one points to a different XML file.
Question: how would the messaging application use this info? I mean, it is not possible to go out to the web using the MMS APN, so how is this Profile URL used?
I also tried to soft reset after changing that, still no joy....
..
..
Thanks for your great help.
Just to clarify, I normally live in the UK, but in this period I am in Italy, this is why I am configuring MMS on my Italian SIM card from Vodafone Italy.
And I've got very good news: everything now works!
I am not really sure how, I simply reset everything back to my original config, doing a few soft resets in between, and now I can send and receive MMS's.
By the way, that IP must only be used in the Gateway field in MMS configuration. Using it as the IP in the connection panel makes it impossible for the phone to connect to the APN (which is logical).
Again thanks for your help.
HI!!
This is my first post,
I have searched the forums and not find it.
Does anyone please have 3 UK GPRS / WAP / MMS Setting for HTC TyTn
I've also been looking for this for a while, but didn't manage to find anything. So decided to build a CAB file myself with all the necessary data and MMS setting for 3 in the UK. Just copy the file to the device and run. No restart required...
Cheers.
Thanks a lot mate was looking for this, Everything working now
Cheers !!!!!!!
I don't use GPRS at all..i only use the internet via my wi fi on my xda 2i..i'm fed up of the "cannot connect..." bubble popping up every 10 seconds and wondered if it could be completely removed, any help greatly appreciated
baltisalty said:
I don't use GPRS at all..i only use the internet via my wi fi on my xda 2i..i'm fed up of the "cannot connect..." bubble popping up every 10 seconds and wondered if it could be completely removed, any help greatly appreciated
Click to expand...
Click to collapse
I've got the same problem until I put my pay as you go sim and hard reset the xda2i (please back up your set up first.) GPRS on xda2I in my opinion, works only on contract sim, but you could experiment by selecting pre pay rather than post pay even if you have a contract sim card on gprs settings at final stages of hard reset.
Hello, I feel the English poor man, is a translation of google. I have one qtek s100 and use the following method, proves uses you for your machine.
Greetings
Dokoto
REG HACK - Turn off GPRS totally (and back to working state) without going to setting
--------------------------------------------------------------------------------
REG HACK - Turn off GPRS totally (and back to working state) without going to settings
1: You need a Registry editor ( eg. Resco Explorer )
2: Find the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\
3: under that , you should see you GPRS settings , for example , mine 's OPTUS GPRS Internet , OPTUS GPRS MMS etc , pick the right one and export it to the *.REG file, and name it to something like " GPRS ON.reg "
4: Modify the setting inside ( for example OPTUS GPRS Internet ) , and change the Enabled value from 1 to 0, then export it to GPRS OFF.reg
use the GPRS ON /OFF .reg to toggle between GPRS always off and on when required.
Happy Registry editing
Greetings from Australia,
are there any WAP users or Australian Telstra WAP users on this Forum, who are able to advise me on enabling my HTC Shift to access Telstra WAP Pages.
I am a Telstra Australia client, I have tried several Data Enabled Telstra SIMs in my Shift (Post Paid Phone, Pre Paid Phone & NextG Data Pack).
I can acess the internet using IE without problems on all the above SIMs on both Winmo & Vista sides.
But I have been unable to configure for access to any Telstra WAP Pages on Winmo or Vista.
These WAP pages provide "free to browse" access to My Account, Data Usage, News, Weather, Maps, Shares etc.
Telstra Phone Help & Telstra shop staff are unable to provide settings for the HTC Shift & suggest that I visit a a computer shop for advice!!
The page will not open on this site: http://www.wap.telstra.com/wap
I followed this advice below (with out sucess) from the Australian Whirlpool Forum for use on HTC Diamond.
"All that remained was to open Settings > Connections
There was a connection called Telstra Internet.
Tapped Edit My Proxy Server
Tick This network connects to the internet
Tick This network uses a proxy server to connect to the internet
Tap Advanced
Set Http proxy to 10.1.1.181 port 80
Then changed homepage to wap.telstra.com/wap/
If you haven't already got a connection equivalent to my Telstra Internet one,
you just create a new modem connection.
Select modem - GPRS, 3g
The access point was called telstra.internet on mine, but may need to be telstra.wap
Username, Password and Domain can be left blank
Tap Advanced and make sure it is set for Server Assigned.
Go Finish and then set Proxy Server as above."
Any advice on this WAP problem will be gratefully accepted.
Regards,
Steve
I think there is more to it
I remeber reading on this site this issue for the Diamond. There is the need to include both the proxy and a cab file to access the Telstra WAP sites. I can't remember exactly what the go was, but I think it was in the Diamond ROM Development folder. I think it is:
http://forum.xda-developers.com/showthread.php?t=412677
Also, I think there was something in te TyTNII forum about the cab (upgrading generic to Next G or something)
I check using "Telstra" and "NextG" or "Next G" in the forum searches. I'll have another look later to confirm what I read before.
As an aside, you said you ahve tried Next G data and pre-paid. Is there a Next G starter kit or can I get a separate number for just data? Telstra (Darwin) is not being very helpful with this as yet and I don't want to use my normal phone SIM for the Shift (too many chops and changes).
Cheers and Beers
Hi nbos04,
Thanks for your reply.
I have just transfered from Darwin to Adelaide, the City & Casuarina Telstra shops did not help me much getting data for the shift. I have been using the SIM from a NextG PC Card 1Gb on an $89 Plan.
In Darwin & Adelaide I was told of new cheaper Telstra phone Data plans for Post-Paid & Pre-Paid plans:
Telstra Post-paid phone plan Browsing Packs:
$10 = 150Mb
$29 = 300Mb
$89 = 1GB
I will soon be OS for three months, as Telstra Pre-paid Browse Plus Data is charged at the same rate as Australia when you are overseas "Free To Browse" is still free & there are no roaming data charges for internet data!!.
So I converted 2 phones from Post Paid to Pre Paid & purchased a & $25 Pre-paid (GSM) SIM Starter Kit for the Shift. They gave me a free NextG SIM & activated it. I spent many frustrating hours talking to OS based call centers to get all three devices set up properly, as the shops don't get any money from Pre-paid, it's do it yourself.
The trouble was after purchasing a Browse Plus Pack I got an SMS confirming the old crap Data allowances:
Telstra Pre-paid phone plan Browse Plus Packs:
$5 = 5mB
$10 = 20Mb
$29 = 80Mb
$89 = 1Gb
The TTP Shopping Centre Telstra staff tell me that the new rates will flow to Pre-Paid?, but I am pissed at the moment.
BigPond also have new cheaper Packs with half price data & $299 rebate for wireless device on 2yr contract. But built in devices are not supported ie Shift.
http://my.bigpond.com/internetplans/broadband/wireless/plansandoffers/default.jsp
I sure hope I can get this WAP / Telstra Home pages problem sorted out before I head off overseas.
regards,
Steve
Cheers for the info - I am going to "try" this today as I am likely to keep the Shift only on pre-paid system (I am really hating choping and changing the SIM between phones when I need to do something on the shift Vista side)
I had another look for the Telstra CAB info. I am not a computer guru, but the info was in the TyTNII pages:
http://forum.xda-developers.com/showthread.php?t=373154
This was someone trying to get their TyTNII going on NextG with the Telstra "My Place" and Foxtel. He lists what he did and the required cab and then details the setup.
Will this work on the Shift? Good question, well asked. I personally will not be doing it, but that is because I use the data primarily for email traffic and some minor banking, so do not really care - but I hope this is what you are looking for. I don't know if the shift in its current Liberated form will handle it.
It could be a LOOONNNNGGG OS post. I am on leave in AUS at the moment from PNG (saying G'Day to the family etc), where there is not data at all so I am just loving having GPRS again (and high spead 3.5G)
Anyone with advice on this?
Hi nbos04,
Thanks again for your reply.
I followed the link:
http://forum.xda-developers.com/show...0&postcount=63
& downloaded & installed the cabs mentioned:
Default_Imate_AUS_HR_V3.600.cab
Default_Imate_MyPlace.cab
Telstra_V5.2.cab
I need advice on how to execute step 3 below, would these settings work & what would be a good registry editor to edit this entry?
3) Change the User Agent by editing the registry.
The key is \HKLM\Security\Internet Explorer\User Agent\CustomBase
I changed it from: HTC_P4550 Mozilla/4.0
to: i-mate JASJAM V2 PPC; 240x320; HTC_TyTN/1.0 Profile/MIDP-2.0 Configuration/CLDC-1.1
IE is still unable to load the WAP or MyPlace pages, as "the connection is Lost" but Comm Manager connection is OK.
regards,
Steve
Good question
outparda said:
Hi nbos04,
Thanks again for your reply.
I followed the link:
http://forum.xda-developers.com/show...0&postcount=63
& downloaded & installed the cabs mentioned:
Default_Imate_AUS_HR_V3.600.cab
Default_Imate_MyPlace.cab
Telstra_V5.2.cab
I need advice on how to execute step 3 below, would these settings work & what would be a good registry editor to edit this entry?
3) Change the User Agent by editing the registry.
The key is \HKLM\Security\Internet Explorer\User Agent\CustomBase
I changed it from: HTC_P4550 Mozilla/4.0
to: i-mate JASJAM V2 PPC; 240x320; HTC_TyTN/1.0 Profile/MIDP-2.0 Configuration/CLDC-1.1
IE is still unable to load the WAP or MyPlace pages, as "the connection is Lost" but Comm Manager connection is OK.
regards,
Steve
Click to expand...
Click to collapse
I'm sorry, I'm a user and not an operator. I am one of those guys that use the forum to help make my stuff better, but can't provide any useful advice about the programming side (though I did donate - that's my only real support to the actual workers!)
I know that in the thread:
http://forum.xda-developers.com/showthread.php?t=377441
(first post)
is a registry editor (called "RegistryEditor.zip"). After unzipping, it is an .exe file and you just copy straight into the WinMo side to use it (I stuck it in My Docs initially, but you can move it into programs later on). This is the one I use when following DETAILED (I uppercase it to show my lack of mastery in the field only) instructions.
The best bet would be to try and PM someone like Comex (or one of the others) from the Shift Project. Though they are not in AUST, they may be able to say if the cab should (or could) work and provide better advice than I ever could.
I am sorry I can not be of better help. I manage construction projects, and have no clue about anything smaller than a nail (though some of my tradies would suggest that a nail is to small for me also )
Good luck.
Please Help - Shift Project Team, Cmonex anyone?
I have installed RegistryEditor onto the Winmo side, but I am not confident to experiment with any entries as I depart overseas in 3 days.
I will use the Shift as my main email & internet device during my trip through UK, Europe & USA.
I will be roaming on my tiny Telstra PrePaid BrowsePlus Packs, I hope to get full access to the Telstra WAP pages, to check my data usage & add data packs as they run out.
Can any one experienced in 3G Provider Registry Settings please assist or direct me to the correct forum?
Regards,
Steve
Telstra WAP settings (Nokia phone)
Hello.
After much searching (and not much finding) I thought I would post the Telstra WAP settings here. I needed these after resetting my Nokia N95 installation (using the "vulcan death grip" of * 3 Green).
These settings allow browsing of the "Free to browse" section on telstra mobiles. My symptoms were: able to browse everything except the "free to browse" site. After doing the below steps, it worked for me.
Settings > Connection > Access Points:
Connection name = Telstra Internet
Data bearer = Packet data
Access point name = telstra.wap
User name = None
Prompt password = No
Password = ****
Authentication = Normal
Homepage = http://wap.telstra.com/wap
Options > Advanced settings:
Network type = IPv4
Phone IP address = Automatic
DNS address = Automatic
Proxy server address = 10.1.1.181
proxy port number = 80
Settings > Connection > Packet data:
Packet data connection = When needed
Access point = telstra.wap
High speed packet access = Enabled
Thanks.
bnc