pppppppppppp
if you have flashed an english rom on x01ht, you need to change the registry to use the japanese key layout. install a registry editor first and change the values as follows.
from:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 20409 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010409
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010409
to:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 20411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
this won't fix "," and "." mapping although the symbols will be all mapped correctly.
i tried and it works..........perfect
thanks to harry
apacom said:
i tried and it works..........perfect
thanks to harry
Click to expand...
Click to collapse
which rom are you on? the mapping issue of "," and "." can be fixed if you have the latest i-mate rom or the latest tytn rom by changing it to this.
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
i use more periods than commas so i don't do it and i forgot to mention it in my previous post.
thanks harry and also can i ask you again about MANNER MODE and NOTE/MEMO..when i change it to english version both side key buttom( left is memo and right is manner mode) are not working. Is there any way to fix this problem?
thx
apacom said:
thanks harry and also can i ask you again about MANNER MODE and NOTE/MEMO..when i change it to english version both side key buttom( left is memo and right is manner mode) are not working. Is there any way to fix this problem?
thx
Click to expand...
Click to collapse
manner mode only comes with softbank rom and it doesn't exist in any wwe roms. i had the same issue when i noticed it after flashing tytn rom on mine. what i have now is vibra that substitutes for manner mode although you can't map it to the manner mode button (press & hold comm manager button, button 3) and i have mapped it to the button 5 note/memo button (press & hold). read this thread and download vibra from there if you want.
http://forum.xda-developers.com/showthread.php?t=277811&highlight=vibra
i don't have any issues with my button 5 note/memo button. just a press will run voice speed dial and a press & hold will run vibra as i said. press & hold was record before i mapped vibra to it. check how your buttons are mapped by start -> settings -> buttons. you can change program assignments as you like.
ringer vibtrate switch works properly, and its nice........i like to used it
i knew X01HT with bootloader 1,09 is not unlockable but i changed the ROM to HTC-Z docomo properly but the problem is the KEYPAD i tried to used the same way(keypad registry) but it didnt works:
--------------------------------------------------------------------------
from:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 20409 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010409
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010409
to:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 20411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
this won't fix "," and "." mapping although the symbols will be all mapped correctly
--------------------------------------------------------------------------
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411
i cant change this to 20411 i always try but it always back to 30411
what is the best thing to do to make SYMBOL back to its original position?
tnx to harry
apacom,
i've never tried docomo rom and don't know how you can fix that. i know qtotter was using docomo rom on x01ht and he might be able to tell you what to do. why don't you send qtotter a pm and ask?
apacom,
let me give you my 2 cents again since nobody has responded to this since my last post. the docomo rom doesn't recognize 30411 for "Layout" and that's why your symbol mapping is screwed. It has to be 20411 with the docomo rom.
i don't understand why you can't change it back to 20411 when you could change it to 30411. try to change it to 20411 with your reg editor, take a breath and then power off and on your device. just pressing the reset button with your stylus won't make the reg changes effective.
i will try that way i hope it will works................thanks harry
Softbank X01HT keyboard mapping - registry editing
Hi
I can modify the first parameter but when I attempt to edit the other two, I get "Access is denied"
Anyone got any clues?
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 20411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
Nice one! Fixed my keyboard issues.
However, I lose my predictive text input for SMS'es - any idea how I can get it back? Using English with WMXL 0.20.1.
Thanks!
help anyone? totally missing my predictive text...I may hv to go back to the original registry changes
predictive text issue
I noticed this post previously.....I went throught the whole thing...and noticed predictive text dissappeared. I hard reboot and did the following
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
"Layout"="197649" (decimal)
without changing anything to 0411 and keyboard symbols worked perfectly as well as predictive text.
Try that instead.
you're a champ reactive1! That sure fixed it!
Thank you, glad to help out
Just to add one further point on this prolem. Apart from reactive1's great solution, i found that some shifted keys on the left were still wrongly mapped, such as ? ! @ and ?
To solve this you need to make sure that
[HKEY_CURRENT_USER\ControlPanel\Keyd] "Locale" is in the registry (add it if it is not) and set to 0411 (Hex) or 1041 (decimal)
Finally my X01ht keyboard now works!!
Related
I've got a German MDA PRO with the Qtek WWE ROM.
I'm trying to get the correct kayboard layout.
Can someone with a Germon ROM please post the registry settings under:
- HKCU\ControlPanel\Keyb\
- HKCU\ControlPanel\keyboard layout\ProLoad
I've tryed to create a String and HEX DWORD value with the name "locale" and value "0407", but that didn't work.
for the german keyboard on english ROM
get a registry editor (like Resco)
search the Change the key
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
edit - Layout in decimal to 66567
then softreset
Hi, I tried to make a .reg to import three keyboard layout changing keys, like so:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\keyboard layout\Preload]
"Default"="e0010414"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
"Default"="e0010414"
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
"Layout"="132116"
But the values didn't changed and I had to do it manually. (I did in both cases soft reset).
How to fix? And a .reg for tweaks etc would be very usefull.
grkn said:
Hi, I tried to make a .reg to import three keyboard layout changing keys, like so:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\keyboard layout\Preload]
"Default"="e0010414"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
"Default"="e0010414"
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
"Layout"="132116"
But the values didn't changed and I had to do it manually. (I did in both cases soft reset).
How to fix? And a .reg for tweaks etc would be very usefull.
Click to expand...
Click to collapse
Are you using hive or file based registry?
see here:
http://forum.xda-developers.com/showthread.php?p=767833
A suitable programme to change from "hive" to "file" based registry is Tweaks2k2 under its system tricks collection 5 setting. This will allow you to reset the device without the soft reset always discarding your changes and going back to default settings via the "hive"
Mike
But is the format of the keys correcT?
grkn said:
But is the format of the keys correcT?
Click to expand...
Click to collapse
Nope. They all miss the DWORD type declaration and all have an unneeded " as in
"Flags"=dword:00000000
Standard Time cab and USA Regional cab
--------------------------------------------------------------------------------
Here's two cabs I threw together.
Standard time cab is simply [HKEY_LOCAL_MACHINE\nls\overrides] "STFmt"="h:mm:ss tt"
The second one changes the date to m/dd/yy, standard time and USA keyboard, specifcally ..
1. Regional setting back to English
2. Registry Key [HKEY_LOCAL_MACHINE\nls] SystemLCID back to 409 (Hex) 1033 Decimal
3. Registry Key [HKEY_LOCAL_MACHINE\Software\Microsoft\Internationa l] LCID back to 409 (Hex) 1033 Decimal
4. Registry Key [HKEY_LOCAL_MACHINE\Software\Microsoft\Internationa l] ACP back to 4E4 Hex, 1252 Decimal
5. Registry Key [HKEY_CURRENT_USER\keyboard layout\Preload] Default back to e0010409
6. Registry Key [HKEY_CURRENT_USER\keyboard layout\Preload\1] Default back to e0010409
(These particular settings I found at http://forum.brighthand.com/showthread.php?p=1469118 )
I'm working on a collection of essential cabs that I'll make available as soon as I'm sure that they work correctly. (essential to me ) ... things like Favorites on SC, My Documents on SC and syncing with ActiveSync, etc.
Enjoy!
(Any ideas, let me know!)
umm i guess i can contribute some how, i found a .cab file that does a fix for you for the 2007 change in daylight savings...works for US and Canada ofcourse...here ya go!
Malik05 said:
umm i guess i can contribute some how, i found a .cab file that does a fix for you for the 2007 change in daylight savings...works for US and Canada ofcourse...here ya go!
Click to expand...
Click to collapse
Well thanks, but did you notice my signature?
Dr Puttingham said:
Well thanks, but did you notice my signature?
Click to expand...
Click to collapse
ooo haha thats where i got it from...i knew it was on this forum but didnt know where...thnx again...
Sorry, I'm very new to posting.... just want to get the right info...
I just bought a softbank HTC (Herm200) with Windows Mobile 6 installed.
WM6 is an english version, but the keyboard assignment is not correct. (the function keys are not correct). It looks like a japanese keyboard layout.
What do I have to do/install to change to an english keyboard?
Please help
Install Schap's Advanced Config and change the keyboard layout in "keyboard" section. If you do not want to install new program you can also edit registry yourself
Goto the following registry entry:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
There is a key called 'Layout' and it is in Decimal.
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal).
The suitable value for German Hermes keyboard is 20407 (132103 in decimal).
The suitable value for Spanish Hermes keyboard is 2040a (132106 in decimal).
Probably Hermes use 20+country ID (409=WWE, 407=German, 404=Trad. Chinese, etc...) format for keyboard layout value.
Don't forget to power off your phone and then power back on when you have finished. Soft reset will not make the changes stick. _ fixed: Theres no need to change ?HKEY_CURRENT_USER\keyboard layout\Preload and ?HKEY_CURRENT_USER\keyboard layout\Preload\1 If you change them then when writing to "to:" field in sms, it doesn't list any names from contact list. (You have to press "Check names")
All you need is to change HKEY_LOCAL_MACHINE\Software\Oem\Qwerty "Layout"="132116"
</verbatim>
Note: For those with a Chinese Keyboard Layout, Changing the Preload will affect Outlook, particularly when composing e-mails. Typing e-mail addresses will not auto-load from your address book for some reason. This can be fixed by deleting the [HKEY_CURRENT_USER\keyboard layout\Preload] folder and all its contents. As of now, no known side effects from deleting the folder has been found.
Note2: For those using a Japanese layout (i.e. Softbank X01HT) with newer ROMs should use 30411 Hex. (197649 Dec) as value for keyboard layout in order to get ',' and '.' properly mapped:
[HKEY_CURRENT_USER\keyboard layout\Preload]
"Default"="e0030411"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
"Default"="e0030411"
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
"Layout"="197649"
How do I change the soft-keyboard layout? QWERTY is working fine but I'm missing CZ chars on software keyboard.
I would like not to install another keyboard but simply change layout of the Windows default one if possible.
Thx
Good morning all,
Trying to look inside files, once again messing around I have associated the EXE files with a text editor and now I can't open any of my Programs. Can someone please help me out and give me a few answers from your registry? Here are a few of the entries I need in order to at least back up somethings before I have to hard reset.
If I'm missing something under these please add it also. Thanking you in advance for any and all help.
Donna
HKEY_CLASSES_ROOT\.exe
"Content Type"=
"Default"=
HKEY_CLASSES_ROOT\.ini
"Content Type"=
"Default"=
HKEY_CLASSES_ROOT\exefile
"Content Type"=
"Default"=
HKEY_CLASSES_ROOT\exefile\DefaultIcon
"Default"=
HKEY_CLASSES_ROOT\exefile\shell\open\command
"Default"=
HKEY_LOCAL_MACHINE\System\State\Power