Related
Hi folks,
I currently have a problem with file explorer. I opened the windows folder and now I am stuck with the time icon, I wait...and I wait... and nothing happens it freezes the phone. After a soft reset and then going back into file explorer it goes back to the folder I last looked at which is the windows folder and freezes again.. so basically I can't use file explorer anymore? Any suggestions?
Steve
Is it locking up? or does it just need more time to load and display all the contents of \windows. Can you minimize file explorer by pressing the hang up key and work on something else, then go back later to file explorer. Are you able to change directories now?
Are you using a shortcut to launch file explorer
I always use Total commander for file management and \windows does take a while to load. It too tries to open the last used directory but if the folder is not available, eg network share, it defaults to the root directory after a warning. Not the answer to your problem, I know, but Total Commander is free and it is much better featured than the standard file explorer.
wizzzard said:
Is it locking up? or does it just need more time to load and display all the contents of \windows. Can you minimize file explorer by pressing the hang up key and work on something else, then go back later to file explorer. Are you able to change directories now?
Are you using a shortcut to launch file explorer
I always use Total commander for file management and \windows does take a while to load. It too tries to open the last used directory but if the folder is not available, eg network share, it defaults to the root directory after a warning. Not the answer to your problem, I know, but Total Commander is free and it is much better featured than the standard file explorer.
Click to expand...
Click to collapse
Try this on a Registry Editor:
HKLM - Software - Microsoft - File Explorer - LastLocation - 0 (zero)
Soft Reset then try to launch File Explorer again.
steve43 said:
Hi folks,
I currently have a problem with file explorer. I opened the windows folder and now I am stuck with the time icon, I wait...and I wait... and nothing happens it freezes the phone. After a soft reset and then going back into file explorer it goes back to the folder I last looked at which is the windows folder and freezes again.. so basically I can't use file explorer anymore? Any suggestions?
Steve
Click to expand...
Click to collapse
IT WILL TAKE A WHILE IF IT IS SET TO TYPE FOR SOME REASON when the files finally display chnage where it says type to date and it will display quicker next time
Thanks folks, got it working. I needed to change the registery values. The phone was freezing up and even after 10 minutes was still not showing the contents of the windows folder.
Da_mayhem just fyi I edited the localpath folder from '/windows' to '/' this seemed to solve the problem. The lastlocation value was already set to 0 for some reason?
Thanks for your help guys...
Steve
steve43 said:
Thanks folks, got it working. I needed to change the registery values. The phone was freezing up and even after 10 minutes was still not showing the contents of the windows folder.
Da_mayhem just fyi I edited the localpath folder from '/windows' to '/' this seemed to solve the problem. The lastlocation value was already set to 0 for some reason?
Thanks for your help guys...
Steve
Click to expand...
Click to collapse
Nice to know it helped you somehow he he he
I seem to have the same Problem with my HTC Touch (non-branded, German Version). However I do not have the aforementioned registry values. There is no "file explorer" unter HKLM - Software - Microsoft.
Any Ideas on how to get my file explorer running again?
In the meantime I'm using TotalCommander, however TC doesn't support sending files via Bluetooth, or at least not that I know of. I can only send via Infrared, or am I missing something?
What is REGISTRY EDITOR? Please help me that! I m having the same problem on my XDA ORBIT ii
da_mayhem said:
Try this on a Registry Editor:
HKLM - Software - Microsoft - File Explorer - LastLocation - 0 (zero)
Soft Reset then try to launch File Explorer again.
Click to expand...
Click to collapse
I tried this, but didn't have a "File Explorer" entry. So I created one and the LastLocation value as noted, but it still opens in the Windows folder and locks up. Any clues?
Thanks,
JSR
AT&T Tilt
Stock ROM no bloatware
jsr said:
I tried this, but didn't have a "File Explorer" entry. So I created one and the LastLocation value as noted, but it still opens in the Windows folder and locks up. Any clues?
Thanks,
JSR
AT&T Tilt
Stock ROM no bloatware
Click to expand...
Click to collapse
perhaps because that is usualy in HKCU not HKLM.
S.V.I said:
perhaps because that is usualy in HKCU not HKLM.
Click to expand...
Click to collapse
I know this is an old post...but after extensive searching and frustration...S.V.I fixed my issue. I just wanted to say thanks to S.V.I
I couldn't find file explorer and it was freezing...like S.V.I pointed out- it is HKCU and not HKLM.
I had done 2 hard resets...and removing "windows" from the path fixed it.
Thanks to all that posted solutions here on this great site!
Update:
Spoke to soon...I can't enter my Windows folder at all using file explorer- I could earlier. I can enter anywhere else...just not my Window folder...I can with Resco explorer. I have to apply S.V.I suggestion to stop it from freezing...but magically-"\windows" keeps re-appearing in my registry.
Update:
Found another solution that actually worked for me!
open File Explorer
Click on Menu>Sort> change it to Name
I think i know the solution
i too have experienced the same problem like this. but then this is what i do. and it's surprisingly works.
1) soft reset your phone
2) click on file explorer again
3) the loading symbol will always appear, but for now just let it be.
4) close the file explorer by tapping 'hang up' key/button. this will supposedly bring you back to home screen
5) wait for half an hour or longer
6) open file explorer
7) the windows folder loaded successfully
Typos
Ayobi's solution worked.
I have a HTC Diamond 2 WM6.5. File explorer froze as I sorted the files in the Windows folder. Exactly followed Ayobi's suggestion. Got out of the mess.
I won't visit Windows folder again!!!
Thanks Ayobi and others for their suggestions.
Jay.
steve43 said:
Hi folks,
I currently have a problem with file explorer. I opened the windows folder and now I am stuck with the time icon, I wait...and I wait... and nothing happens it freezes the phone. After a soft reset and then going back into file explorer it goes back to the folder I last looked at which is the windows folder and freezes again.. so basically I can't use file explorer anymore? Any suggestions?
Steve
Click to expand...
Click to collapse
Hi, i have the same issue but currently do not have a registry editor installed. So i can't really follow the above instructions to resolve the issue. Any help with executing a .cab without file explorer?? got annoying aussie telstra rom installed
insanenyc said:
IT WILL TAKE A WHILE IF IT IS SET TO TYPE FOR SOME REASON when the files finally display chnage where it says type to date and it will display quicker next time
Click to expand...
Click to collapse
Definatly works. great help. thanks man.
insanenyc said:
IT WILL TAKE A WHILE IF IT IS SET TO TYPE FOR SOME REASON when the files finally display chnage where it says type to date and it will display quicker next time
Click to expand...
Click to collapse
This definitely worked - on a related note you can go into Registry Editor (HKCU - Software - Microsoft - File Explorer) and change the SortOrder value to anything but 2 (apparently 2 is for Type). Soft reset and reload the program, and it should load a lot faster.
da_mayhem said:
Try this on a Registry Editor:
HKLM - Software - Microsoft - File Explorer - LastLocation - 0 (zero)
Soft Reset then try to launch File Explorer again.
Click to expand...
Click to collapse
I had same problem, because I tried to sort Windows folder by file Type. Oops.
I know it's an old post, but here's my two cents (because this thread guided me to a slightly modified resolution.)
My resolution on Tilt2 TP2 WinMo 6.5 was found here:
HKCU - Software - Microsoft - File Explorer - LastLocation - 0 (zero)
HKCU - Software - Microsoft - File Explorer - LastPath - \ (slash)
HKCU - Software - Microsoft - File Explorer - SortOrder - 1
That did the trick for me. Was able to open File Explorer. Strangely, it took me to the Windows folder again; but didn't hang this time. Maybe because I skipped soft reset (so maybe registry change may not have taken effect entirely?)
Hi All
I'm sure someone will be able to tell me what I am doing wrong
I have loaded Mortscript on to my E650 and have copied a script from this site and saved it as wireless.mscr
When I run the file from Windows explorer - it opens the file in Word on my E650 and does nothing.
What am I doing wrong?
Thanks
Uninstall Mortscript and then reinstall it. I guess it's a matter of file association in the registry.
mortscript
Thanks....have tried that and it still does not work.
Any other ideas?
You must run once the mortscript's executable to create the associations with the mscr files.
dancer_69 said:
You must run once the mortscript's executable to create the associations with the mscr files.
Click to expand...
Click to collapse
yep, ran the yellow file that was located in the \program files\mortscript folder. It gave me a message to say the file associations has been made yet the docs still open in Word !!
AAAARRRGGGGGGHHHHHHH !!!!!!!!!
Try deleting the key at HKCR\.mscr...then opening mortscript.exe Then try to open your script. It deletes the file assc.
saenzjoseph said:
Try deleting the key at HKCR\.mscr...then opening mortscript.exe Then try to open your script. It deletes the file assc.
Click to expand...
Click to collapse
Thanks...where would I find the HKCR\.mscr Does that involve editing the registry as have never done it before
Yes this is a registry key. You will need a registry editor Total commander has a free one. Then just navigate to HKey_Classes_Root(hkcr) and locate the folder .mscr open it and delete the key in there..
In order to locate and edit the registry in total commander tap the / in the top right corner of the screen right next to the .. Then double tap on the \\ then double tap on Registry then HKCR then .mscr and delete the key labeled default ,or you could just double tap on it and then in the box provided type MortScript
key
Thanks,
have done as suggested, removed the keys, have removed and reloaded Mortscript. Rebooted phone....and they still open with Word Mobile !!!
Jeez - can it be so hard !!!
When you open that key what does it say.... when you open word go to menu and options and in display....click on word files, i dont think that will work but its worth a try
saenzjoseph said:
When you open that key what does it say.... when you open word go to menu and options and in display....click on word files, i dont think that will work but its worth a try
Click to expand...
Click to collapse
Hi, Thanks for your help so far
My word seems to be an editor only - as dont have any options to select.
mort
hi
Am getting somewhere now...turns out the file was named wireless.mscr.txt so have edited it to reflect the proper extension. Will try again now
Thanks again
well that makes a lot more sense...since the actual ext that you are opening is a txt. just drop the .txt
It's probably far more simple: You script has the wrong extension. It must be .mscr, not .psw, .doc or .txt. The default Explorer hides the extension, so your file's pobably named "somescript.mscr.psw" (or *.doc) but is shown only as "somescript.mscr". Use an explorer replacement like Total Commander or Resco, or the desktop's Explorer ("My mobile device") with "Hide extension for known documents" disabled in the options, and you'll see the wrong extension.
Edit: Oops, didn't realize there's a second page...
I'm new to this site and the ways of fooling with the details of this phone. I have an HTC Mogul 6800, WM 6.1, through Sprint. I am trying to install some "iPhone" type software and am stuck almost at the starting point. I'm trying to copy this file
welcomehead.96.png
into the /windows directory on the phone. Since that file already exists on the phone, it would appear that it needs to be overwritten. It won't overwrite as that file on the phone is marked as "read-only". How can I edit that file to remove the "read-only"
thanks
Why not just move the old file to another directory?
I believe you're trying to change the splash screen? Apparantly that file is locked as ROM file and so overwriting may not be possible. Why don;t you change the registry value to point to a different file? Refer this Splash Screen changing guide.
Preffered Registry editior: Free PHM Registry editor
Regards,
Carty..
The file is Read-only, so I can't move it. I tried installing the PHM Registry editor, it thinks it's a Microsoft Daylight savings time update.
glk21c said:
The file is Read-only, so I can't move it. I tried installing the PHM Registry editor, it thinks it's a Microsoft Daylight savings time update.
Click to expand...
Click to collapse
Use this......It's a file explorer that will overwrite most system files.
To unlock the registry which you really don't need to do for this simple file overwrite. Do a search for CERegEditor. It's a pc app that will sync to your phone and view aswell as edit your registry. There is a command within the program to unlock with.
lllboredlll said:
Use this......It's a file explorer that will overwrite most system files.
Click to expand...
Click to collapse
Definitely, I confirm this will overwrite that file.
lllboredlll said:
Use this......It's a file explorer that will overwrite most system files.
To unlock the registry which you really don't need to do for this simple file overwrite. Do a search for CERegEditor. It's a pc app that will sync to your phone and view aswell as edit your registry. There is a command within the program to unlock with.
Click to expand...
Click to collapse
I've actually had bad luck with Total Commander. I've successfully overwritten the file once out of a dozen tries. I've tried the Copy command as well as Move.
Anyone having better luck that can chime in? I'm wondering if I'm just missing a setting in Total Commander.
the 0ne said:
I've actually had bad luck with Total Commander. I've successfully overwritten the file once out of a dozen tries. I've tried the Copy command as well as Move.
Anyone having better luck that can chime in? I'm wondering if I'm just missing a setting in Total Commander.
Click to expand...
Click to collapse
Have you tried copy to clipboard?
You can also rename the file and then put the new one in there with the good one.
the 0ne said:
I've actually had bad luck with Total Commander. I've successfully overwritten the file once out of a dozen tries. I've tried the Copy command as well as Move.
Anyone having better luck that can chime in? I'm wondering if I'm just missing a setting in Total Commander.
Click to expand...
Click to collapse
Well I can overwrite with TC and GSFinder. I change my splash screen often due to boredom and I can't remember the last time I had an issue. Your ROM stock or Custom?
My ROM is stock. I guess I'll try this softwre listed above, hopefully I can change the value of this file as it can't be moved, overwritten or re-named right now.
Hi, a little help here needed.
When i tried to do no. 38, when overwriting the file, an error was prompt up stating that "Error Copying File: Access is denied. Be certain that there is enought free storage memory, that the destination is not write protected and that the file is not currently in use."
I have already turn of HTC sense in Today Settings already.
Thanks =D
__________
38. Disable Extra Animation on Clock
Everytime you refresh the home screen, the flip clock starts 1 hour and 2 minutes back to show off the flip animation. You can disable this extra animation so it only flips when it needs to flips. Download the modified manila file at the end of this post. Disable HTC Sense in Today settings. Backup original Windows file (you are going to overwrite) to your SD card. Extract downloaded file to Windows directory on your device (overwriting the original). Enable HTC Sense again in today settings.
Are you using File explorer ? If so, it cannot be done. Use Resco Explorer or Total Commander to overwrite such files
wooo thanks alooooot. =D
mobile88 said:
Are you using File explorer ? If so, it cannot be done. Use Resco Explorer or Total Commander to overwrite such files
Click to expand...
Click to collapse
It did not overwrite even with Total Commander...... What am I missing?
Idea
vbamatya said:
It did not overwrite even with Total Commander...... What am I missing?
Click to expand...
Click to collapse
Just restart ur device >open total commander or resco explorer >rename file which you want to overwrite to something else
thn copy file u want
I have searched but found no answer - so I would be glad if someone could tell me if the following is possible:
I would like to set windows file explorer to select the file on the first tab, and run it only if it is tapped twice.
Is there a way to do this ?
(A registry tweak ? a cab to install ? a setting somewhere ?)
Thanks
Anyone ?
Thanks
I'd like to know that too
+ 1
I'd like that too.
Som30ne said:
I have searched but found no answer - so I would be glad if someone could tell me if the following is possible:
I would like to set windows file explorer to select the file on the first tab, and run it only if it is tapped twice.
Is there a way to do this ?
(A registry tweak ? a cab to install ? a setting somewhere ?)
Thanks
Click to expand...
Click to collapse
Resco file explorer allows that be configured, as well as being superior in every way.