OK, it finally happened....
I got myself into a bind and need some help if possible.
Something on my device is causing an incompatibility with ActiveSync. My PC recognizes my device, but ActiveSync won't connect - even as a guest.
I went through all the troubleshooting steps for ActiveSync, including turning off my firewall, un/reinstalling, and everything else I could think of.
Then I finally hard reset. That worked, but a restore from my last backup brought the problem right back.
I'm going to be going through everything I have installed to try to locate the source of the problem, but thought I'd ask to see if anyone might have an idea of where I should look.
Any help would be greatly appreciated.
hey mine did the same, what did you install and we can cross refrance it and see if we can solve it, i had to hard re set too and it works now, but im dreading putting all my software back on it for it to do it again.
any 1 else had this problem or found out what causes it to lose its active sych??
Related
I recently upgraded my ROM to the new version from HTC. After that, my GPRS stopped connecting. I verified all the settings, even went so far as to delete and reinput the settings.....no change
So, I decided to downgrade the ROM. When I attempt to load it, as soon as it starts, the ActiveSync connection drops, and then XP sees it as a new device, so the fucntion failed. I reset the phone, by removing the battery, and it restarts fine.
Does anypne have any suggestions? This is bugging the heck out of me.
do a hard reset. my wife had the same problem with the GPRS not connecting after she upgraded and i told her to do a hard reset. everything was fine after that. best to do it right after the upgrade before u start customizing everything
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
My a7 was running well for about a week since it quit...but today when I booted up device, it failed to recognize sd card...same card used for updating to mod 1.4...same card I've been using to listen to my music, etc...but now won't recognize...I've tried two different micro sdhc cards..formatted, reformatted, but device continues to display mount sd card...all else works fine! Does anyone have any new ideas? I can't even reinstall mod since a7 can't read my cards. Thanks for any input that would be helpful. I understand these issues are ongoing for many out there...what to do?
deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Mine has hung on a black screen on me. Seemed that it didn't fully come out of sleep mode.
I was able to recover by holding the power button for 15 seconds to hard power down. No data loss.
deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Exact same thing happened to me this morning. Tried to reset - not happening. Hard powered down. Don't have time to try anything else right now. I'm new to the forums and new to android. Wish me luck! I've been loving my A7, and much appreciation to Dexter and all the other knowledgeable hackers/modders/posters.
hey the same thing happened 2 me twice. Once the first day after i got it, since i had only had it for 1 day i wiped it reinstalled dexter's mod 1.41 and it worked. First app i installed was backup root. Now, a week later the exact same thing is happening. This time i dont want to wipe it because of all of the apps i have installed, games ive played etc. Any ideas? Could we just try reinstalling dexter's md without wiping? Or wiping reinstalling and recover from a backup?
Also have you installed busybox? I had just installed it both times before it failed to turn on. Maybe its just coincidence but you never know..
-D
Thanks to anyone who can help! and also thanks Dexter for all your hard work as well as everyone else that has contributed to the elocity, im lovin it! (when it works )
success!!!!
I got it to work! I don't have a permanent fix but if it happens again just boot into recovery and reinstall the dexter's mod update 1.41 and it works again! No wiping required. This isn't a permanent fix but it will work until we find one
-Dylan
Hasn't happened to me (yet) but I didn't upgrade to the newest ROM. I'm still using 1.3and it has been very stable. Only issue I've had was when I tried to use Killswitch to go to sleep mode when the cover is shut (great idea) but it didn't work and froze all except the live wallpaper. Weird.
Good luck, guys.
in the event it does happen to you, you might want to check out my apx thread for reflashing the factory firmware if you can't get your tablet unstuck. theres alternatives if you don't want to get stuck again.
The method you outline seems so complex...way above my abilities, but makes me wish I had followed though on some early programming training opportunities. That was the road not travelled.
okantomi; while i wouldn't encourage others to follow thru with procedures they fear would cause more harm, i would mention that if you google up my nick you'll find i've been able to do much w/ android software and devices while not knowing anything about programming. if i can do it, anyone can. i just wanted some themes for my phone.
i'm just an android hobbyist by night (and when i get a chance during the day), and a computer tech by day. no programming expertise, but i can reasonably reverse engineer and port software and components using simple file managers like ztreewin(trialware).
don't be mistaken that the folks out there providing you solutions necessarily know anything about programming or software development. just how to chef up files at different levels. i understand this doesn't go for everybody.
Thanks for the encouragement. I'm impressed with what you've been able to do. It is also nice to read upbeat comments about the A7. There is something sort of special about a device that you really almost have to build yourself... putting so much into it... biting your fingernails to nubs with each ROM flashing. You don't get as attached to any device that is 100 percent complete right out of the box, though of course there would be a lot less aggravation.
Not sure if I'm the only one, and if I am that really sucks, but I got tired of waiting for the OTA and decided to install the update via the fastboot method, unlocked my bootloader installed without a problem.
However the issue now seems to stem from transferring media files to my tablet, which I never had a problem doing, a pop up window will tell me that android.media.storage has stopped, giving me an option to report and to simply tap okay.
Not sure reporting ever does anything, and if it does I've never seen it change a single thing at all, but after I tap okay or send the report, any files transferring will just exit out, then if I unplug my usb and plug it back in, it doesn't seem to recognize the tablet at all.
I've so far remedied this, not sure if it's a permanent fix or temporary, by going into settings>apps>all, then from there tapping the app, clearing data and cache, restarting my tablet with a hard reset and it seems to be working for the moment.
However transferring files since the update are sluggish at best, and taking a 356MB folder of images used to take maybe a few minutes, 5 or 7 at the most, now it's hanging there at times with the transfer time increasing.
As a matter of fact I'm transferring said 356MB folder right now and it's stuck at 10 minutes to finish and hasn't moved for about 10 minutes.
If anybody else is having these problems, can you suggest ways you've fixed it? Or do I simply need to either do a factory reset or straight up flash it again to fix the problem?
Also, I made another article detailing my problems with updating, which I've since fixed obviously, but Recovery Mode isn't anywhere to be found, I do the regular method and before it showed the android with the red triangle and below him it would say no command, now it just shows the android with the same triangle with no wording underneath at all.
I've also re-downloaded the official factory image 4.4 from google's developer site and tried to manually flash recovery onto it, and it says that it succeeded but then when it goes back to fastboot and I choose recovery it loads then shows me the android with the red triangle.
I've even tried downgrading back to 4.3 but it tells me during the rewrite of the bootloader that there's a signature mismatch.
In addition, this should be the last revision to my issue, I've even tried re-flashing 4.4 and now that's kicking back an error saying there's a signature mismatch, so I can't go into recovery, I can't downgrade, I can't flash a recovery image to my tablet, I think I screwed up in ever updating to 4.4.
Im having the same problem with Media Storage when transferring pictures via Android File Transfer on Mac, tried it on Windows also, same problem.
It happens with my Nexus 4 on KitKat also!!
I still havent found a way to fix it, did you (OP) ever find a fix?
Cheers
Stewart
StuMcBill said:
Im having the same problem with Media Storage when transferring pictures via Android File Transfer on Mac, tried it on Windows also, same problem.
It happens with my Nexus 4 on KitKat also!!
I still havent found a way to fix it, did you (OP) ever find a fix?
Cheers
Stewart
Click to expand...
Click to collapse
Nope no fix yet, I haven't tried transferring a large number of files since, oddly enough, I finally did get the OTA update and it installed 4.4 again.
It didn't take long and the file size was puny, only about 32MB, I assume it installed what was missing, but I haven't noticed anything out of the ordinary since the official updated kicked in.
Yeah I have the latest OTA also, but I am still having the same issue!!
StuMcBill said:
Yeah I have the latest OTA also, but I am still having the same issue!!
Click to expand...
Click to collapse
Not really sure why it's different for you, like I said I got tired of waiting for the OTA and manually flashed the factory image, that's when the problems started, but after a few days I got a notification that the new update was ready which really confused me.
But I installed the downloaded update without a hitch, booted like normal and I just finished transferring a 100MB folder of images to my N7 without an error popping up on my tablet saying something crashed, so I can only assume for the moment until I transfer a larger folder, that the DL'd update fixed the problem.
I've also heard people flashing it again, or side loading it, or even a factory reset would fix the problem, but there weren't many replies as to this actually fixing the data transfer problem.
Problem with downloading ota update kitkat 4.4
I have stock rom and waited for the ota update. It came this morning and while downloading twice the verification failed.i rebooted and the screen came up download failed and had a retry button which i tried to activate and does nothing, The screen has been stuck on the return download for over 12 hours. My wifi connection is strong. Any ideas?
manow91 said:
I have stock rom and waited for the ota update. It came this morning and while downloading twice the verification failed.i rebooted and the screen came up download failed and had a retry button which i tried to activate and does nothing, The screen has been stuck on the return download for over 12 hours. My wifi connection is strong. Any ideas?
Click to expand...
Click to collapse
Take anything I say with a grain of salt as I'm not the greatest guy to ask for help, I only really ask questions here and I'm just going to suggest what to do, if you do it is up to you and I take no responsibility for your device having further issues.
1. Hard reset your device and upon it rebooting, check for the update again and try downloading it again
2. If that doesn't work then back up your data
3. After backing up your data do a factory reset on your device and once you've booted back up to Android, check for the update again and install
4. If that doesn't work, I'm not sure what else to suggest, this is what I would do to try and fix the problem, but for my situation it was unique in that I tried fixing it various ways that seemed to make it worse before it got somehow better.
I hope issuing a factory reset works for you, if not then that hard reset does when you try to redownload the update.
JohnathanKatz said:
Take anything I say with a grain of salt as I'm not the greatest guy to ask for help, I only really ask questions here and I'm just going to suggest what to do, if you do it is up to you and I take no responsibility for your device having further issues.
1. Hard reset your device and upon it rebooting, check for the update again and try downloading it again
2. If that doesn't work then back up your data
3. After backing up your data do a factory reset on your device and once you've booted back up to Android, check for the update again and install
4. If that doesn't work, I'm not sure what else to suggest, this is what I would do to try and fix the problem, but for my situation it was unique in that I tried fixing it various ways that seemed to make it worse before it got somehow better.
I hope issuing a factory reset works for you, if not then that hard reset does when you try to redownload the update.
Click to expand...
Click to collapse
Thanks for your reply back. Yep i also thought of the same 4 step solution as yourself but i also heard from 2 people that had the same thing happen to them and they thought it could be a goggle server problem, So i am going to wait to see if it sorts itself out over the next few days
manow91 said:
Thanks for your reply back. Yep i also thought of the same 4 step solution as yourself but i also heard from 2 people that had the same thing happen to them and they thought it could be a goggle server problem, So i am going to wait to see if it sorts itself out over the next few days
Click to expand...
Click to collapse
That could be too, just thought I'd take a shot, hope it works out for you.:good:
Hey everyone. I got my replacement N6P in the mail today, and I am needing some advice. I went through the typical setup for it. Bootloader unlock, decrypt, root, etcetc. However, I am running into an issue where I cannot copy anything from my computer to the device. I am getting an error that states "The device has either stopped responding or has been disconnected." I dug around XDA a bit and found a bunch of possibilities, but none of them resolved my issue. I have tried just about everything I can think of except for reflashing to stock and starting again. I am hoping it is an easy fix, but I think a reflash may be needed. Has anyone else seen this before, and does anyone have any ideas for me to try?
EDIT: I have done literally everything I can think of, including flashing back to stock. Tried machines running Windows 10, 7, and Ubuntu. Tried three different cables. Absolutely nothing is working. However, I can push and pull files fine. No clue what is causing this.
EDIT2: It has something to do with MTP. Certain filetypes transfer without any issues, but most do not. I can get around this by changing the extension of the file before sending it over, then changing it afterwards. My previous N6P never had this issue. Is there anything that I can do to resolve this, or am I stuck with network transfers and renaming junk?
so here is my issue for the past year or something my shark 2 has been stuck with a update pending and will not progress i have spent the last week trying to find a solution but i am just more confused than ever. and desperately would lovesome help please.
i have attached a screen shot of what i se in the updated screen.
any help given would be appreciated.
many thanks.
Do a factory reset. Before that, backup all your data
hey there.
sorry to ask but iff i do this will it let me do the update as there is a lot on my phone to reinstall due to the fact that i kinda use it a lot for work.
i would hate to miss some things and not have the update work.
thanks for your reply.
mark
I cannot guarantee that it will work but in theory it should. Your update is stuck because some crucial files are missing and downloaded file cannot be properly verified to start installation. Factory reset should repair that.
tw1st3d83 said:
I cannot guarantee that it will work but in theory it should. Your update is stuck because some crucial files are missing and downloaded file cannot be properly verified to start installation. Factory reset should repair that.
Click to expand...
Click to collapse
I totally agree with you... I will suggest the same , do a factory reset
i will try this and get back to you when i have done it
thyanks guys
okay update time peps.
thinks this worked though i lost all that was there as the back up io did is now useless and wont restor i would imagen it is due to doing like 13 updates today lol.
have you guys any idear how to fix google now i have updated it keeps coming up with carnt connectt o google servers now and i had it set up before.
thanks again..
mark