Hello,
I need some help to enter in my wifi network.
I think that i have done a wrong wep key, so i can't now enter in my network.
With a hard reset, i have perhaps my solution, but someone have another ?
PS: sorry for my poor english....
If you have only put the wrong key into your phone then you can delete the settings by going to Settings---->Connections----->Network Cards
You can delete your Wireless settings there. Just delete, reconnect to your network and re-enter the key.
S.K.
Ok Thanks
I succeeded in connecting me, but I always have a problem. In fact it was with the mac adress in my router configuration
Guix
Related
Hi there hope you can help me out on this matter.Ive just got my phone yesterday as was looking to connecter it to wi-fi we are looking for the network key How would we find it out please'and key in in authentication what shoud i put in and data encryption what should i use.Can some one talk me through it Step by step if there any more info you need i can give it to you cos as im stuck.
We are trying to connect to our home wireless networt we are on bt voyager and we can not connect it the phone picks up the voyager but thats abt it if someone can help you would make someone very happy.Thanx mono33
Wi Fi connection on SPV M600
Hi, did you ever manage to sort this problem? I have just bought one of these and am experiencing the same difficulties as you.
Any help appreciated
Thankyou
Hi guys.
Little silly question:
What are the settings on your router?
If this is your home network then you typed in the WAP or WEP key to set it up. Otherwise, you don't need one.
Have you even tryed to read the manual? It helps.
wifi connection problems
Hi, maybe i should've explained more
I am trying to connect to my wifi router at home (netgear). My m600 has found the the signal. i tap on the network name and go to the CONFIGURE WIRELESS NETWORK screen,in the GENERAL tab i can see the SSID, i select THE INTERNET from the drop down menu next to "connects to", in the NETWORK KEY tab i set authentication to OPEN, Data encryption to WEP & then enter the network key.
I then go back to the CONFIGURE WIRELESS NETWORK screen and my m600 is trying to connect, then it will say AVAILABLE but not CONNECTED - why is this????
Also, it only stays AVAILABLE for about 30 seconds and then its status changes back to UNAVAILABLE
I really would be most grateful for any help in this matter
Thanks in advance , Jimmy
Sounds like you are typing the key wrong.
Make sure encryption type and key matches exactly the settings on your router.
Try disabling encryption on your router and see if you can connect.
M600 wifi connection problem
Thanks levenum - still no luck though
Although i have managed to connect to my neighbours unsecured network (very poor connection though)
Has wifi connection been explained indepth elsewhere? or am i the only unlucky (retarded) one? :roll:
Hang on a second, something I saw in the other thread (somewhere in Network forum):
You need to type the actual key (hex values) and not the pass phrase if you are using one.
Sorry, don't know any guides.
wifi connection problem SORTED!
Cheers levenum,
i dont wanna make myself look a complete idiot so i should say that i did have the proper key typed into the box at 64bit encryption
however, i changed it to 128bit encryption and it connected straight away
I have no idea why
I wonder what i'll be moaning about next??? :wink:
alright i need help connecting to my home wireless router. (and yes it is a wireless G router, i just installed that thing that lets it work with wireless G)
alright so here is what i do step by step.
1. hit the comm manager button, and hit WLAN so it connects.
2. choose my account
3. enter the network key
4. I hit settings, and i see i have a great signal
5. a pop up says "unable to assign a server-assigned IP address. Try again later or enter an IP address in Network Settings".
6. I hit settings in comm manager then hit wi-fi settings
7. I see all my info on the main button and i hit the advanced button
8. Status = associated to network... Mac address is filled in... IP says 0.0.0.0 and i can't change that.
if anybody can help me that would be great.
9. now after a long time of not doing anything, a pop up says the network key is incorrect. enter the correct key and tap connect. Except I know it was correct because i entered it very carefully, and all my info (#7) showed up.
somebody help me
try static ip allocation
start>settings>connections > network cards > WLAN card> IP, subnetmask, dns gateway...etc etc u know the drill
alright I put in all of those settings, but still when i turn wifi on, it still asks me for my network key, and still try's connecting to the normal WLAN.... ughhh...
Seems to me like your security settings arent quite right, but thats a guess. I had a similar problem with a PC when I had enabled MAC filtering. You don't have that turned on on your router do you.
To rule out (or in) security settings, I would disable my routers security and make sure I could log on to an open network, then go from there.
Oh I know i can log into an open network, I did at a coffee shop a little while ago. And I know I can connect to my router, my other computer is and so can my PSP.
I have a similar problem. I didnt have this problem a couple of weeks ago and managed to connect without a problem. However now I'm having the same symptoms as the first poster.
When I disabled the security setings on my router, I managed to connect and received an IP address. However DNS was not working. Explorer refused to bring up any page. I couldnt even access my router's home page using just the IP address. I even tried entering the DNS IP address manually but this didnt solve the problem. Skype managed to connect without a problem though.
Cheers
ianS200 said:
I have a similar problem. I didnt have this problem a couple of weeks ago and managed to connect without a problem. However now I'm having the same symptoms as the first poster.
When I disabled the security setings on my router, I managed to connect and received an IP address. However DNS was not working. Explorer refused to bring up any page. I couldnt even access my router's home page using just the IP address. I even tried entering the DNS IP address manually but this didnt solve the problem. Skype managed to connect without a problem though.
Cheers
Click to expand...
Click to collapse
I had the same issue even after I turned off the security, mac filter etc. It would connect once but after a suspend, it wouldn't connect at all. I have a d-Link DI614+ router. Finally figured out that the MDA was not going thru the channels properly. I had my router set to 10 and it would not budge beyond 11. I just changed the router channel to default to 11 and turned on security and filtering one by one and everything worked. My advice is to set the router to a default state and attempt to connect it. If that doesn't work, throw a temper tantrum and remove all settings on the MDA and go thru step by step again...
I have recently changed my routers encryption from WEP to WPA-PSK
I have gone into the settings on my VarioII and changed the key, it finds the router tries to connect but fails, I have re-entered the code several times but still it won't connect, it is a pain because you have to enter the code manually (it's 63 characters long) I managed to do it on my PS3 first time
Blobstrom said:
I have recently changed my routers encryption from WEP to WPA-PSK
I have gone into the settings on my VarioII and changed the key, it finds the router tries to connect but fails, I have re-entered the code several times but still it won't connect, it is a pain because you have to enter the code manually (it's 63 characters long) I managed to do it on my PS3 first time
Click to expand...
Click to collapse
Not going to solve your problem, but if you use something like Hitchhiker then at least it allows you to cut and paste the key.
There are lots of threads on WPA-PSK often Router specific - However without knowing your router here is a listing:
http://www.google.com/search?as_q=WPA-PSK+hermes&hl=en&num=10&btnG=Google+Search&as_epq=&as_oq=&as_eq=&lr=&as_ft=i&as_filetype=&as_qdr=all&as_nlo=&as_nhi=&as_occt=any&as_dt=i&as_sitesearch=http%3A%2F%2Fforum.xda-developers.com&as_rights=&safe=images
Mike
Thanks for your quick response, my router is a BT Voyager 2100. I'll see if there's any firmware updates for it
Ok fixed it.
Switch off the router and remove the connection on your network card and soft reset, restart the router, when it finds the connection put in your details, all is fine again.
Phew
Blobstrom said:
Ok fixed it.
Switch off the router and remove the connection on your network card and soft reset, restart the router, when it finds the connection put in your details, all is fine again.
Phew
Click to expand...
Click to collapse
Good news!
Mike
Upgrade to Windows Mobile 6
I flashed my TyTN to the latest radio and Windows Mobile 6 (using the black one now, but the XDA .2 worked as well).
Pre WM6 I had no WiFi love on my WPA encrypted link, but afterwards it works just fine. I had the same symptoms as you described, finds the SSID, enter password, no worky.
hi guys,
i am hoping i will get the solution for my problem from this forum if there is one on this earth.
i bought htc h2.i am trying to connect my htc to my wireless router at home but its not connecting to it.it has found my home network and trying to connect but doesnt connect actually.
I have a nokia n80 as well.i just need to put the wep key in that and it connects with the wireless dont know whats wrong with my htc.
when i go to the wifi setting and put the wep key in further details are as follows
netowrk to access: only access point
Network name: home
connects to: The internet
authentication : shared
data encryption: wep
network key : xxxxxxxx
key index:1
use IEEE 802.1 option is checked.
EAP type is smart car or certificate
here when i click on properties tab it says
"Cannot log on to the wireless network.this network requires a personal certificate to positevely identify you"
I have also tried aquiring the certificate but it doesnt retrieve it
i put the log in,password and server as my netgear's IP address.
on the wifi advanced settings in HTC it shows the MAC address but doesnt show the IP address .
please please help pme out here.i have spent hours sorting this out but not successfull yet.hope anyone experienced can help me here
Thanx in advance.
regards
any advice guys???please guide me into the right direction and i will try and sort this problem out by trial and error.
have u tried searching and connecting with wifi monster. im sure it should work.
uncheck
Use IEEE 802.1x network access control
thanx for the suggestions.before doing anythingele i hard reset the phone.and it is connecting to wifi fine now.
hope you are fine guys, my situation is the next one: when i connect the wildfire to my home wifi it conects fine i out the password and everything, but when i try to use the internet or any other aplication that requires it it doesnt work, as i had read, it maybe the password, i also read that this cellphone only uses wireless b&g, my router is a linksys wireless b 802.11b, so any one knows how to proceed?
another thing is that in the router menu my password is under WEP option, dies it have to do anything with the WPA and that?
thats all for now i hope its clear, thanks.
i changed the password from WEP to WPA pre shared key, but still nothing, anyone?