Related
Hi,
Following on from my phone app problems, my XDA Mini S has now stopped producing sound alltogether!
I believe the problem is that the phone thinks i have the headset plugged in, as i can hear sounds through the suppluied headphones but nothing when they are unplugged - not even during a call.
Please can someone make a suggestion? I have tried soft resetting.
:?:
EDIT: I should point out that i can hear the ringtone when the phone rings through the speaker but absolutely no other sounds - nothing in calls and nothing from the speakers - WMAs etc.
try unplugging and plugging it back in a few times (quite a few in one go)
the headphone "sensor" is usually hardware which picks up when something is physically plugged in .
not sure what else to try
if u have had it less then 30 days then get a replacement next day from o2.
or hard reset ? but backup first!
Hmm,
I just can't work this out. How come the ringtone plays through the speakers? If the phone thought the headset was plugged in would it not just play the ringer through the headset? Can anyone confirm this please?
Stupid phone :-(
Mine did the same, ringtone played OK but could only make calls with the headset plugged in. Thouhgt I was going to have to return it, but ried pushig the jack i alittle further before pulling it out and it all started working OK. I've not had the problme since.
hi guys , i have problem with sound as well , i just unblocked the simlock with lokiwiz02b , and suddenly there was no sound at all , i can call but there is no sound , i tried to play ringtones nothing works , headset is not solution as well , when i tried to run media player message - no hardware device to play sound or device not available , and everytime i open the volume control it's show that it's mutted and i can't scroll it up to make any sound all i can say it seems that system drivers for sound are ****ed up,
anybody have any idea how to solve it? i have still few days to return it but i played with this simlock so i'm afraid they can charge me extra for repair ,
Have you tried a hard reset?
Dr Doom said:
Hmm,
I just can't work this out. How come the ringtone plays through the speakers? If the phone thought the headset was plugged in would it not just play the ringer through the headset? Can anyone confirm this please?
Stupid phone :-(
Click to expand...
Click to collapse
My Charmer, has the opposite problem. My speaker went dead on my suddenly during a phone conversation on speaker phone mode. So, I can't hear any phone rings and stuff, but still able to make calls, with or without the ear phone.
Yes, confirm (for my charmer) that if you have your ear phone in, speaker won't give you any sound. So, don't think it is that earphone plug sensor thing problem.
yes i tried hard reset but everything still the same -no sound at all
No sound on earpiece, microphone ok
Well I tried the suggestions in the forum and still it didn't work. I then thought maybe there's dust and stuff in the workings, blew into the earpiece and it worked.
It's worth a try!
Hope this helps.
Hello to everybody.. I had the same problem for months and last week i gave my wizard to the assistance cause I feded up!
I solve the problem with 70 euros but now it-s better.
I've been using Dopod 818 pro since the end of December 2005. A week ago, a problem suddenly came up. The speaker of this PPC does not work anymore.
I tried to play music using windows media player, or real player -> Does not work
I tried to use the speaker phone -> Does not work
I can't even hear anything when I make a call or receiving a call
It works when I plug in the headset. everything works perfectly.
It plays the ringtone when someone call me. (Very soft sound)
Is this a hardware problem? or is there anyway that I can do to fix it.
I bought the phone overseas (I'm located in Australia now). It takes a lot of effort to send it overseas for warranty.
Thank you
Do a soft-reset. If that doesn't help, do a hard-reset. If that doesn't work , do a ROM re-install. If it still doesn't help, then you have a faulty unit.
I've done soft reset
I haven't done hard reset
->haven't had any backup program.
Is there any free solution for backup software?
Thanks
i ve solution
well for this solution u must disassemble the phone. look at the handsfree jack and apply a jumper to the two front points of the connector. it will solve ur problem
aj0s said:
I've been using Dopod 818 pro since the end of December 2005. A week ago, a problem suddenly came up. The speaker of this PPC does not work anymore.
I tried to play music using windows media player, or real player -> Does not work
I tried to use the speaker phone -> Does not work
I can't even hear anything when I make a call or receiving a call
It works when I plug in the headset. everything works perfectly.
It plays the ringtone when someone call me. (Very soft sound)
Is this a hardware problem? or is there anyway that I can do to fix it.
I bought the phone overseas (I'm located in Australia now). It takes a lot of effort to send it overseas for warranty.
Thank you
Click to expand...
Click to collapse
I've had this problem, what I did was play music using headphone and suddenly unplug the jack. The Speaker works again like charm.
Cheers!
dopod 818 pro speaker issues
I have run into the same issue with my 818 pro and my Himalaya...The fix is always uninstalling one or more applications that may be causing the problem. I assure you it's very unlikely that it is a hardware issue...Uninstall all applications and you should get the sound back..
I have the same problem with my 818 pro. I have already done the hard reset-no change, tried blowing air in and out through the headphone jack, silicone spray and playing with the plug. It appears to be a hardware issue with the sensor mechanism inside so it always thinks it has a headset connected--poor design.
Did anyone else figure out a solution for this (other than returning for repair?) This happened to me this weekend. Suddenly happened after I was using the headphone for an hour while I was rollerblading. Now I can't answer any calls without either the bluetooth or standard headphone. I can hear the ring go off, but just can't use it as a regular handset. I'm sure everyone agrees that this is a hardware issue with a poorly built headphone jack. But while I'm waiting for the retailer to restock the dopod 818 and send me a replacement, does anyone know of a hack that would allow the phone to activate the headphone AND the phone speaker simutaneously? The reasoning is I think the phone currently thinks there is a headset constantly being plugged in, so it deactivates the loud speaker as well as the phone speaker. But if there is a hack that lets WM5 to use the handset speaker and the headphone jack simutaneously, then at least I can answer phone calls without having to use the headset. Of course, this won't be a permanent solution, but it may bridge me through these tough times with the dopod.
I have to say, I still love this phone, but my patience is wearing a bit thin. First, it's the disappearing SD card (which I'm not even sure if it's solved yet), then I was having some problems with sending MMS messages, now this. :x
I had the speaker problem with my Jam. It is apparently a common problem with PPC phones, the mechanical switch in the headphone jack gets stuck. I was able to get mine to work again by plugging in the headphone jack a few times. If that doesn't solve the problem...well you know the drill
There is nothing to do but exchange it--I was never able to find a work around either. Sorry.
I had problem the speaker on my HTC Charmer. I send it for repair and they replaced the speaker, with in like a week+.
However, now there are some other problems. It seems that when I try to use the speaker (play songs, phone, games, etc), the battery drain like mad and the unit gets very hot. The unit drain so much energy that the battery will die off even if I had the unit on AC power. Going to send it back to repair AGAIN!
gunggu said:
I've had this problem, what I did was play music using headphone and suddenly unplug the jack. The Speaker works again like charm.
Cheers!
Click to expand...
Click to collapse
I had the exact same problem and suddenly unpluging the jack works for me..
this "sudden unplugging" thing won't work with Prophet, the Prophet's buzzer(speaker) problem is very common, the same thing happened to me, cost me 12$ in iran to change that part
818pro speaker problem Hardware related
I had the same problem.
Speaker unit in phone burns out very quickly.
If you have warranty - your lucky.
In my case since I bought in Singapore and Use in Israel, I had to fork out 50USD to get a new speaker unit.
Tal
What you do is open the Comm Manager, tap the "phone" icon to set to flight mode. Then, turn on again.... that should do the trick
I don't know what planet most of you guys are on.
The Prophet has a common problem with the rear speaker - it's a hardware issue as X_Farhad has pointed out.
There's no need to hard reset, and what's the crap about flight mode?
Yes, some can have a problem with the headphone socket and the solution for that is in this thread.
Mostly it's the speaker itself. The solution is here: http://forum.xda-developers.com/showthread.php?t=281331
I've found a bit of sponge works better than paper - to see what I'm on about - go to the thread I've posted here.
Speaker issues and phone hangs
I also have similar issues with my Xda Neo. The speakers stops responding when i get incoming call. I mean the phone dosent ring. Then if i try any music player or ringtons, there is no sound. I have to soft reset. Sometime when i get incoming call, it dosent ring and it also hangs the phone. Then i have to hard reset. I had to use that sponge over the speaker and then the speaker works. But sometime it still hangs. Looks like either HTC or Windows Mobile has major issues. I dont know how long this sponge thing will work. Are there any solutions..
sameer
Tal,
I have dopod 818 pro and having the same phenomenon like others, now I'm abroad and can not check the thing with the headset.
Can you tell me please where can I get service in Israel (I bought mine in Thai).
Many thanks
Dotan
sound problem
Dear all and administrator
can you give me solution about my dopod sound problem?
1. I just can used ring tones for receiving new messaging from the my dopod system ( I can't not used ring tones from my gallery/downloaded sound/ring tones application )
2. When new message coming and phone call coming, the sound is very small (can your's give me information how to setting that so the volume can be more loud).
Thank you very much for your's attention, I'm very apprenticed if the solution can being send to my private e-mail address at [email protected]
anyone have solutions on this issue? thanks
Hi everybody, first please excuse me for my poor english, I come from south of France..
I explain you my problem:
Since somethin about 1 or 2 month, the both speakers of my PDA (external and the speaker to listen to the conversation while calling) doesn't work anymore..
And the microphone doesn't work too.
It does like if I had headphones plugged but it's not the case.
The phone never falled and change the rom or the radio rom didn't fix the problem.
I think it's a bug in the hardware but I don't know, so if you please could help me!
I thank you.
does it work with a headset?
many people report this hardware malfucntion
many solve it by plugging in and pulling out a audo connector
sooner or later the headset detector seem to fall back into place
Yeah it's work with headset and with bluetooth headset..
I remember that I tried this before but I will try again!
Edit: but doesn't exist a file like "headset plugged on" or whatever in the registery?
I have to say that i'm glaaad!!
In fact i opened my ppc, and after 5 tries, I have reajusted the jack in its place... ...and it's work now!!! All works like before my problem..
So for the person who have the same problem it's simple to fix it (with precautions)!
I have a german version of X1 , almost everyting works fine but with a little problems. i am a 3-year WM user and know the basic stuffs of this OS.
but the worst thing is the mic on headset dosen't work at all, the button and the speaker are good.
dose anyone have the same problem with me? and what should i do?
thanks
On my phone the headset jack needed a really hard push to go all the way in. Make sure you really have pushed it as far as it goes. But I guess you already tried that, huh.
Should be an easy thing to get replaced at the store though.
Returned my first X1 because of a not-working button >and< microphone of the headset (ordered via internet). The replacement phone had the same problem.
In the accompanying shop, which I finally visited, also a third phone did not work. They tried a bit more when I left and discovered that it can work if you connect the headset >when< a call is received...
Also, they reported that it is not a know problem for the X1.
Well, with three not-working phones it seems to be a problem!
Maybe a headset problem instead?
my headset doesn't work if the phone is on vibrate or no sound mode. If I change the phone to normal then the headset works. Touch cruise headset works on vibrate mode. I am not sure if other people have the same situation. I only the put phone in vibrate mode at work so if I want to use headset I just change phone to normal, life goes on.
same problem
By using voice recording it uses the mic from the phone. i think it's a problem of the software. It does not switch... maybe a registry issue...
i have the same issue, and its a hardware problem, because if you plug it a couple of times, sometimes works and sometimes dont...
someone has found a solution to this?
hi there
i have a Hermes, exactly the T-Mobile version..
anyway it worked fine till one day i got no sound at all, no mp3 no notifications, nothing....
except the boot up sound... checked the forums, seems it's a common problem, and i figured that the rear speaker works (since the boot up sound comes from it), the speaker cable is connected so i have no clue... if it would be broken, than the boot-up sound wouldn't come at all from the rear speaker, riight?
changed like 5-6 ROMs so far, from 6 to 6.5, no changes with sound...
any clue guys what to do?
I'd need to solve this asap...
thx for any solution
can please someone at least confirm me if my rear speaker is dead or not?
cos i hear the boot up sound from it but no other sounds...
please ,its urgent, thx
Well, the first thing that i would consider doing is backup my important data and do a hard reset....why don't you try that too....?
okay
got from ebay a new speaker... changed it and it doesnt work either...
hard reset and changing the ROM (6-7 of them) didn't help...
at beginning the sound could be heard at boot only while playing music, ringing and that stuff was mute... after 2 days the sound at boot disappeared too...
so, does anyone have a solution? when i plug the microUSB to 3.5mm adapter i can hear the sound on my earphones, but there is no sound when played normally on the ppc itself...
can anyone help me to solve this? where could be the problem?
thanks
okay...
going mad really... now i flashed an original AT&T US rom (although i have a tmobile EU) and guess what.... i hear the sound back again, but only at boot up... other sounds in winmo (ring, mp3, music, programs) are dead... can't hear anything although the volume is set at max...
so... i assume this can't be a hardware issue..
before this ATT i changed like 6 more different roms and all with same problems... now i have sound only at bootup... does anyone know where is the problem and a possible solution?
thanks
cmon guys... don't tell me no one has no idea what to do.....
i've been flashing and reflashing the roms but so far i can get only the boot up sound... any other sound is not available.. why? how to repair it?
thx
it's funny to see you can ask sometimes questions no one knows to answer
you've tried it by using the head set...?
whether the results were the same as well (no sound)..?
when using a headset (extUSB) there is sound and everything is normal...
Papcina said:
when using a headset (extUSB) there is sound and everything is normal...
Click to expand...
Click to collapse
you'd better check the speakers on your device , may be the connecting cable is damaged and if necessary you replace ....
I have the same problem here!!!Have you fixed that??Can you suggest me something, please???
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
nonsuchpro said:
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
Click to expand...
Click to collapse
you see in the WIKI, because there is described several ways to increase the BT A2DP sound quality and sound notification by Changing the Registry