Related
I know there is a way to do this but does anyone know what program/registry setting i have to change in order to get the sim contacts hidden so I only have the outlook contacts? any help would be very much appreciated
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSIM"=dword:00000000
Wow. I was just thinking of the very same thing. Thanks. I was wondering if there was a program to toggle this on and off? Maybe Mortscript could be used for that. I'll have to look into that.
Hi all
I'm trying to develop a windows mobile 5 managed application on AT&T 8525 smart phone, and on a prepaid plan from AT&T.
Unfortunately, the prepaid plan sim generates notification messages about the current balance preriodically, and this happens even if my application is running!!!
Is there anyway to trap, disable, or surpress system notification through managed code, phone settings, or registry hack?
I spent some time playing around with the registry settings, especially those under: HKEY_CURRENT_USER\ControlPanel\Notifications. However, I was not able to get it to work.
Note that the notification comes from the network as a USSD message.
I have been trying to find a solution for this problem for a while, so any help would be greatly appreciated.
Stanley
I have been looking for a way to disable ignore get rid of etc etc of that annoying USSD message. If you come up with anything please shoot me an e-mail.
However... I have a nokia 5500 that I use with a prepaid sim sometimes and it does something wierd. Usually it will start ignoring the balance notification message. If I have the MP3 player going and I send and recieve texts through the nokia suite it will eventually stop showing the messages. Not sure why and my Nokia friend didn't know why either. It has to go through the whole thing again if you reboot the phone though. I'm afraid to upgrade the firmware as I might loos this really great feature.
But if you come across something let me know as I have been digging all over for a solution and there is almost no info on it out there other than frustrated customers.
hklm\services\ussd
Notification balloon suppression SOLVED
After much searching and tinkering I finally found a simple way to disable the annoying balance notification message that arrives after every data connection on the AT&T Pay As You Go service with a data package. This fix involves adding a single registry entry and it suppresses all USSD messages that originate from the carrier, even those that you might request manually.
Here is the registry change:
HLKM/ControlPanel/Phone
New value: SuppressUSSD := DWORD(1)
Add this value and (probably after a soft-reset) you will not be bothered with the $0.00 change notification messages.
-Kevin
Samsung Sync
I have this same problem with my Samsung Sync it is also prepaid. How do i disable the notifacation using Bitpim? or what is the program you used to disable it with.. Sorry I'm new to this and don't really understand what I'm doing.
Thanks
sdkevin said:
Here is the registry change:
HLKM/ControlPanel/Phone
New value: SuppressUSSD := DWORD(1)
Add this value and (probably after a soft-reset) you will not be bothered with the $0.00 change notification messages.
-Kevin
Click to expand...
Click to collapse
Thank you!! Worked like a charm
Thanks
Many thank yous, worked for me as well. I called ATT before finding this and they told me there was no way to turn them off, looks like I have to spread the word now.
HLKM/ControlPanel/Phone
New value: SuppressUSSD := DWORD(1)
-Kevin[/QUOTE]
I am new to registry editing. I am going into the phone folder (using PHM), Selecting "New DWORD value," typing "SuppressUSSD" in the value name field, entering 1 in the value data field, and selecting decimal. I am still getting the popup notifications.
Sorry to ask such a newbie question, but what am I doing wrong?
help please.
sdkevin said:
After much searching and tinkering I finally found a simple way to disable the annoying balance notification message that arrives after every data connection on the AT&T Pay As You Go service with a data package. This fix involves adding a single registry entry and it suppresses all USSD messages that originate from the carrier, even those that you might request manually.
Here is the registry change:
HLKM/ControlPanel/Phone
New value: SuppressUSSD := DWORD(1)
Add this value and (probably after a soft-reset) you will not be bothered with the $0.00 change notification messages.
-Kevin
Click to expand...
Click to collapse
is this something i have to do on the computer or on the phone? i need your help with this step by step. please reply asap. email at [email protected] if need be.
This would be on the Hermes. You can find a regedit tool by using the search function or just check in your programs directory (check all folders too, especially tools) as it may have been cooked in.
Cheers...
sdkevin said:
After much searching and tinkering I finally found a simple way to disable the annoying balance notification message that arrives after every data connection on the AT&T Pay As You Go service with a data package. This fix involves adding a single registry entry and it suppresses all USSD messages that originate from the carrier, even those that you might request manually.
Here is the registry change:
HLKM/ControlPanel/Phone
New value: SuppressUSSD := DWORD(1)
Add this value and (probably after a soft-reset) you will not be bothered with the $0.00 change notification messages.
-Kevin
Click to expand...
Click to collapse
Thanks a lot, you made my day.
hello
could somebody explain this step by step please
i need it baaaaaad!
at &t notification
I have a blackberry curve 8310. I am on the go phone plan and i am tired of getting these notifications after every thing i do. Can somebody walk me through on how to get this off.
for wm6 users, i have written a walk through in my blog, hope this helps
http://www.xanga.com/ewcy/692252173...nnoying-att-gophone-balance-reminder-message/
sweet
awesome. just used this to help a friend of mine who has uses prepaid cingular with his 8525. worked great!
thank you!!!
sdkevin said:
After much searching and tinkering I finally found a simple way to disable the annoying balance notification message that arrives after every data connection on the AT&T Pay As You Go service with a data package. This fix involves adding a single registry entry and it suppresses all USSD messages that originate from the carrier, even those that you might request manually.
Here is the registry change:
HLKM/ControlPanel/Phone
New value: SuppressUSSD := DWORD(1)
Add this value and (probably after a soft-reset) you will not be bothered with the $0.00 change notification messages.
-Kevin
Click to expand...
Click to collapse
worked like a charm for the wizard
just got at&t today and it already started to bug me
ww2250 said:
hklm\services\ussd
Click to expand...
Click to collapse
once here what do u do
what do you turn off
Thank you so much for the info.. i disable that annoying pop up on my HTC touch viva.
Hello!
I've purchased a Touch HD a couple of weeks ago.
But I have a problem with the notification on TF3D homescreen saying there's one new voicemail message.
When I call voicemail, listen to the message, delete it, the notification does not go away.
I've searched the forums, and the solution to call myself and leave a message and then delete it does not fix the problem.
Also a soft reset does not make it dissappear.
Is there a register hack to remove the message?
Or something else I can do to make it go away?
H.
this is a bug - mine is doing the same thing.
And there's nothing we can do to solve it?
H.
Not sure if this will help but I had the same problem with an old wm device. The trick was to listen to the message, delete it/save it then wait a couple of seconds before hanging up.
similar problems with my old hermes and the problem was to do with sms_providers.dll file.
I had to replace this file.
Do a search in hermes directory
I think this may be due to the phone not being correctly setup for the network. I've had this on other WM handsets after flashing the ROM - and sorted the problem by installing the correct settings for the network, otherwise I'd get these kind of problems and sometimes strange SMSs with control characters in them.
Try going to "Connection Setup" in Settings -> Connections and resetting to the correct network & country.
Hope that helps.
dsm52 said:
I think this may be due to the phone not being correctly setup for the network. I've had this on other WM handsets after flashing the ROM - and sorted the problem by installing the correct settings for the network, otherwise I'd get these kind of problems and sometimes strange SMSs with control characters in them.
Try going to "Connection Setup" in Settings -> Connections and resetting to the correct network & country.
Hope that helps.
Click to expand...
Click to collapse
lol - of course its set up for the correct network. I made sure it was one of the first things I did!
Well, tried the solution with the sms_providers.dll change, but no luck.
Actually I don't think that was going to work anyway because I don't get weird text messages saying new voicemail.
That works just fine. The only problem I have is that it displays the 1 one voicemail message in between the call info and the calendar on my home screen. And what I try, it just won't go away.
I've also tried to reset the connection setting, but that didn't help also.
I'm going nuts about this!
Is no one else having this issue?
For your info, it's a dutch official rom version.
H.
Also when I leave myself 2 voicemails it still displays 1 new voicemail message.
It appears to be stuck.
Is there a registry setting for tf3d to remove this or something??
H.
Ok,
I've done a hard reset and the notification is gone now.
Hopefully it's not coming back anymore!
Thankz for all your help!
H.
h.vanleeuwen said:
Ok,
I've done a hard reset and the notification is gone now.
Hopefully it's not coming back anymore!
Thankz for all your help!
H.
Click to expand...
Click to collapse
Has the notification come back? I have the same problem with my new WWE official ROM.
Thanks dhatw.
dhatw said:
Has the notification come back? I have the same problem with my new WWE official ROM.
Thanks dhatw.
Click to expand...
Click to collapse
Okay, I just sent myself a voicemail and when I retreived it I deleted it and waited until the voice said deleted and then I pushed * to exit and now the notification is gone from my screen. I don't know if I had to do all of that but it worked anyways.
Registry Fix to Clear Voicemail Indicator
Using any registry editor go to the following keys
HKEY_CURRENT_USER/System/State/Messages/vmail/Line1/Unread
HKEY_CURRENT_USER/System/State/Messages/vmail/Line2/Unread
Display values and change Count value back to zero.
Worked like a charm!
HTC TyTN (a.k.a HERMES)
Windows Mobile 6.1 (CRC's ROM)
Dears,
How can i know my sent SMS status on my HTC Diamond 2 mobile??
(Sent - Received,...)
is there anyway to know that?
When writing the SMS, go to options- there is the option for a delivery report.
Sorry to hijack this post.
But I have just updated my phone with the official windows mobile 6.5 from the HTC website. For some reason I now can not set the LED to stay on until I have read the message like I used to be able to. The tick box is greyed out. Does anyone know a way around this?
SQueal. there is a regedit to fix this. get a regeditor,if you dont already have one and navigate to HKCU\Controlpanel\Notifications and find entry A877D65B…
change AvailableOptions value to 15.
hello. I have tcm and as I understand, i can edit the registry. Where do i find it? Thanks for your time
codhunter said:
SQueal. there is a regedit to fix this. get a regeditor,if you dont already have one and navigate to HKCU\Controlpanel\Notifications and find entry A877D65B…
change AvailableOptions value to 15.
Click to expand...
Click to collapse
Thanks codhunter, is there a registry editor on the phone, or can I access it through a PC one when its hooked up via active sync?
While I am in there, is it also possible to change the text message alert to something I want, I notice that they have removed this on the updates as well which is quite irritating.
On my Phone -Voice Mail setting in Sounds and Notifications the Repeat checkbox is grayed out. Anyone know why?
Thanks
are you using visual voicemail?
It comes that way by default,
If you want to activate it look around for a CAB called:/Regedit Enable Repeating Notifications/.
install, reset than go to Notifications Settings and mark the Checkboxes from the start.
Just one piece of warning,even in case you answered your missed call,SMS or Email for exapmle it will still keep on repeating for another few minutes,however to undo it simply Uncheck the Repeat box.
I'm not using Sense so I doubt I'm using Visual Email, at least that I know of.
I surely don't want to trade this problem for a larger one, such as by having to put up with unwanted repeated warnings after I've dismissed the notification.
I found Control Panel/Notifications/Repeat in the Registry and changed it to a 1, then did a soft reset but it didn't make any difference.
Given that Events seem to have individual different default values I'm thinking that the problem is likely in how the event itself is defined in the Registry as opposed to a global setting there.
This CAB i maked yesterday will help.
FRANQ_23_PL said:
This CAB i maked yesterday will help.
Click to expand...
Click to collapse
Can you tell me what Registry entries your cab modifies? Is your cab uninstallable? With notifications being the primary purpose of my PDA functionality I'd like to make sure I know what it is that I'm modifying. At any rate, thank you!!!
This CAB is uninstalable and modify one value in registry:
"Options"=dword:40000000B
if i good remember. C'mon mate i don't wanna hurt your device wanna help.