Related
Has anyone found a utility or a way to automatically dial numbers using a calling card? This is a rather convenient feature in my previous (non-WM5) cell phone that allowed me to import my corporate phone numbers and then use automatic calling card to dial them without editing hundreds of entries in the phone book.
I have noticed the "Callingcard" code sample at MSDN, however, there does not seem to be a compiled binary available anywhere and I do not have the development environment available.
Any help or tips appreciated.
Ihave been using this one
It is one of the importat things for me
so I use Program called "Long Distance Dialer (Pocket PC Phone) 1.3"
it works on WM2003, WM2003SE and I am runing it right now on WM2005
http://www.pocketgear.com/software_detail.asp?id=12595
good luck
DNO
Thanks! I did not realize it even runs on WM5. However, it does not see to go past dialing the access number - goes to reorder / busy tone right after. Is there a trick / fix to it?
I am using it on HTC Wizard
I never had that kind of problem
I don't know how to help you
This is my settings
Name: My card name
Acces#: my number (only numeric )
Dial Seq : PIN/Destination
Wait: 1Sec Pin : My pin
Wait 1 Sec Destination
then I go to Contacts I right click on the name I want to dial , it gives me optioon >> Dial using : then Name of my calling card .
When I click on that it gives me list of the phone numbers unther that name .
Since I call from USA I do need to select option << Add 011 before number >> but I do not do it because I added 011 to all phone numbers that I call with the card , in the Contacts
I hope this will help.
Good luck
DNO
I installed Long Distance Dialer 1.5 on my PPC. I like it so much that I want to register ($4.99). However 1.5 cannot be purchased anywhere anymore. Did anyone manage to purchase a registration key for 1.5? Or alternatively are 1.3 registration keys inter-changeable with 1.5?
This seems like a great piece of software, but it won't seem to accept pins less than 4 numbers. I have all my number listed with the country code first, so I need to add 00 to call them. In the past, I've configured my calling card feature to use 00 as the pin, which works great, but I can't get this to do it and I don't want to manually add 00 to all my numbers!
Many thanks for any help,
Paul
The link is to version 1.3. What you need is version 1.5. A quick Google will give you two or three sources.
1.5 has no limitations, but has an annoying trial notice pop-up each time you use it. Where can I purchase a registration key?
Thanks for the reply. I've downloaded v1.5, but it still won't let me enter a pin of less than 4 digits. Any thoughts?
Many thanks,
Paul
Solved the problem. In v1.5 you can put spaces as well, so, even though it needs at least 4 characters, I can put two spaces and then the two zeros.
Best,
P
Interesting - I was trying to solve my problem with the software dialing only the calling card access number. I defined an address book entry with the whole number with pauses - and still only the access number gets dialed. The card I use follows the "Number followed by PIN" model with a second dial tone after you dial the access number and a third one after the called number. Any ideas what could be causing the issue? Could it be that the Wizard does not recognize that the call has been completed after it dials the access number?
free and the best calling card dialing software
this is reply to betstu2004 request i.e compiled binary from msdn betstu2004 mentioned about
its in cab format and is attached for downloading.
here is the procedure for installing and using it:
1)copy the cab file in ppc and install it
2)then using any registry editor we have to edit the values of number to be dialled and the pin number of the calling card,to do that
open registry editor
go to:
hkey_current_user
then software
then microsoft
then calling card
in this option you have to edit two entries
1st is Number which is your calling card number
2nd is Pin which is your pin number
save the changes
then to use the software
go to contacts
then
with stylus touch and hold the contact(international) you want to dial
you will see an option
call mobile using calling card
click it
and ppc will start dialling using calling card software with stored calling card number and pin
once the card is finished you can input the values of number if different from previous one and pin again
in some cases the new number and pin will only be saved in the registry after soft reseting the phone
you can even adjust the pause time which is 2 sec by default
this software is working perfectly on my xda exec and i hope you all will love it
cheers
My email to the author (VSOFTCODE) of LDD bounced. Looks like I will have to remove it after the trial expires.
Edit: I just managed to purchase a licence through Handango after all.
----->chaniana
Thanks works fine!!
chaniana - BIG thanks - it works flowlessly.
Now - if I could only get it to dial the number before the PIN!
reg key
Well I know this is not a warez site but
would it be wrong if I give out the reg code ??
I think not ,because the software no longer supported by the developer.
what you think ???
One more thing !!
I have Version 1.3 which I bought from www.pockeatgear.com
where did you find v1.5 ???
Let me know
DNO
this is cool....
chaniana , i have been looking for something like this for a while... i have 2003 not 2005 to be able to complie or change this...
I am just migrating form treo 650 and am missing a program TakePhone. what it did it let me create rule
e.g. any number starting with a string it will use a calling card so i could set +44 use a calling card x
that way when i disl a number it will intercept the call an see the first few digits, if +44 it will dialthe calling card and wait for me to hit a button to enter a pin then eait for another button to dial the number, all in a few strokes i was dialing international and never had to change my contacts. when i was there in UK all i do is disabke the rule and voila i am in business...
see if u can do this
i did something similar in VS2003 creating from scratch an app that would list the contacts and i enter a ph and pin in 2 seperate textboxes and hit dial, got it to make a call to the 1800# but could not figure out how to dial the rest automatically so i am stuck
Long Distance Dialer 1.5 at handango.com.
Just pay the 5 bucks, it may inspire others to create affordable useful software!
This software doesn't work with PocketInformant. Any solution ?
I installed Long Distance Dialer 1.5 (Trial), entered Calling card (access#, PIN)
I can see new menu item when I right click "contact", but when I select "Dial CCard" NOTHING happe! No call started.
I'm using Wizard.
Hi
I am not able to see any context menu once I tried using by stylus
I am on WM6.1
Is it still usable
cheers
chaniana said:
this is reply to betstu2004 request i.e compiled binary from msdn betstu2004 mentioned about
its in cab format and is attached for downloading.
here is the procedure for installing and using it:
1)copy the cab file in ppc and install it
2)then using any registry editor we have to edit the values of number to be dialled and the pin number of the calling card,to do that
open registry editor
go to:
hkey_current_user
then software
then microsoft
then calling card
in this option you have to edit two entries
1st is Number which is your calling card number
2nd is Pin which is your pin number
save the changes
then to use the software
go to contacts
then
with stylus touch and hold the contact(international) you want to dial
you will see an option
call mobile using calling card
click it
and ppc will start dialling using calling card software with stored calling card number and pin
once the card is finished you can input the values of number if different from previous one and pin again
in some cases the new number and pin will only be saved in the registry after soft reseting the phone
you can even adjust the pause time which is 2 sec by default
this software is working perfectly on my xda exec and i hope you all will love it
cheers
Click to expand...
Click to collapse
Hi
I tried to search in magician forum about this, but it seems not find any similar to this
Have you ever have a feeling to find name by phone number? as for instance I got miss call from 123 111 number but does not show any name in my missed call list
so I open up contacts, but unfortunately, it only allows me to search by name not by phone number...
any idea how to do this?
THanks so much
televisi said:
Hi
I tried to search in magician forum about this, but it seems not find any similar to this
Have you ever have a feeling to find name by phone number? as for instance I got miss call from 123 111 number but does not show any name in my missed call list
so I open up contacts, but unfortunately, it only allows me to search by name not by phone number...
any idea how to do this?
THanks so much
Click to expand...
Click to collapse
Use the "Find" from Programs, type phone number, select "Contact" and voila!
Ow... I didn't realize that this possible as last time I tried them but resulting nothing (probably the number is not exist there and I assumed this function is not working)
Sorry questioning this question as I should read my manual more
you have to put number exactly as it writen in contacts... +38039....
and name will appears
Yea, I just notice that you need to enter exact number (with / without space) otherwise will not show anything... totally a bad search function...!!!
you can use Smart Dial: push green key then, just digit 5-6 cifres of the number and the pda will search all the contacts that contains the 5-6 cifres sequence.
televisi said:
Hi
I tried to search in magician forum about this, but it seems not find any similar to this
Have you ever have a feeling to find name by phone number? as for instance I got miss call from 123 111 number but does not show any name in my missed call list
so I open up contacts, but unfortunately, it only allows me to search by name not by phone number...
any idea how to do this?
THanks so much
Click to expand...
Click to collapse
Try the Standard Search option and you can find the contacts by numbers. Cheers
Hm... found anomaly here:
For some reason I tried the Smart Dial skizz0 mentioned, but for some reason it does not show the contact details when I type them, but when dial them it shows correctly
Eg:
what shown in contact:
Home
(61) 3 1234-5678
so I try smart type in smart dial:
12345678
during smart dial typing, no result shown
BUT
when I dial them, after a while it shows "HOME"
Weird isn't it...
for my opinion this "hyphen" method in contact get upside and downside:
upside ==> we can read it easily
downside ==> for some reason the program confused to recognise them...
Just got my new Orange M3100 (Tytn) and I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Also trying to do similar with Bluetooth settings as I swap my BTheadset between phones just as frequently. I have found a link on this site to a utility to do that but not had chance to try it yet...
Can I just make a shortcut to that as well ??
Apart from that it appears a excellent device, running Tomtom etc without any problems....
Thanks in advance Phil
All the ways I tried to create such a shortcut do not work, because it requires an USSD "call". I asked WM5NewMenu author to implement USSD handling, will see...
For now the best solution I've found is to assigh speed dial keys in the dialer to USSD sequencies to divert and cancel diverts. It's OK for a while because speed dial keys can be easily accessed with one hand only (green phone button, then arrow left or down).
EDIT: In case you don't know USSD sequences... You'd better consult your operator to be sure. For me:
Divert all calls: **21*number_to_divert_to#
Cancel divert of all calls: ##21#
There are also codes for conditional diverting, of course.
Hi Phil,
What Lurker0 has mentioned is a good idea. You can save those strings as a number in a contact and maybe assign a speed dial or voice tag to that contact for speed? I guess one contact to enable and another to disable. The commands Lurker0 mentions are standard over all networks.
I'm not sure if there are ways to send AT commands to the modem in the TyTN (M3100) but it is another possible way to do it if someone knows how, if not then it might be useful info to someone else.
The AT command you need to send is AT+CCFC=1,1,<number>,128,1,,, this is the number in local format (no +44) like 07968xxxxxx to enable and AT+CCFC=1,0 to disable.
Gavin.
Phonealarm may be a simpler solution as I think u can add a forward number within a profile so just switching profile from the Today screen (phonealarm skin) would do the trick...
www.pocketmax.net
I've not had any dealing with the ATM commands so to be honest I wouldn't know were to start. I've just tried to install Phone alarm in my Orange SVP
M3100 but after asking me if I need and extra language the software just locks up.. Soft restart then required....
I managed to find the directory that it was installed in, the setup prog is there but I can't find the executable file, I guess that it has not got that far !!!!
Any help please...Phil
I'd suggest to try USSD codes as the easiest and 100% working solution.
Tried the ussd numbers in the contacts list.... works very well both divert and cancel divert... Just need to setup the speed dial now, were is that manual !!
Thanks again.
Phil-w
Hi Phil,
Go into the phone skin (green button) > Menu > Speed Dial...
That's you...
Gav.
Speed Dial is also at "green phone button" then arrow left, or arrow down, or wheel down. So one hand operation is possible.
Many thanks to you both... Nice to find helpfull people on here... Phil
phil-w said:
I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Thanks in advance Phil
Click to expand...
Click to collapse
Phil,
I do the same and installed the O2Plus (and patch) software which tweaks the today screen and gives direct access to mutiple profiles for different forwarding options - works really slickly.
Check this forum for the .cab files
Hope that helps.
Rgds
Lifechanger
i tried putting the codes in a speed dial but Tytn unhelpfully said i had to enter the sequences in from the phone pad directly. all i did was put the **21*<no># in as a speed dial. did i miss something somewhere?
If you are rooted, start a shortcut to "Activities". Scroll down to "Phone", expand that, then scroll down to "Call forwarding". Select! Easy peasy.
Hi All,
Great site!!
I have 2 questions:
1 - When I use smart dialing from my hermes I use the direction arrows once I have found the contact and choose the work number of a contact that has an extension as +1 (999) 999-9999 x 9999 I then get a dialog saying "Invalid entry, please try again."
This same entry dials fine from speed dial or dialing from contacts, any suggestions, it's a real pain to manually dial the whole number.
2 - I have my numbers in outlook 2003 and they are formatted with the +country code format, so all numbers have a + in front of them.
When I smart dial, I can't see the last number of the phone number it only shows
+1 (xxx) xxx-xxx
Again it's really annoying as the only way I can find the number is by dialing and I usually use the smart dial to find a phone number when I am looking for someone's phone number.
BTW I have tried to edit the number and remove the + but outlook put's it back. This is actually good when travelling.
Thanks in advance,
I apologise in advance if this information is somewhere on the site, I am not lazy and I did read quite a bit before posting.
ROM version: 2.15.502.3
WM5
on my outlook, I have the phone num , ext and the phone will dial and wait for pickup before dialing the ext.
of course, i am not using the country code feature, so...
I would be happy with that behavior.
If I could change the font to be smaller in the phone application at least I could see the whole number.
Thanks for sharing.
Hello,
I often use an access code to dial internationally, and once I am connected to that access number, I have to enter the number of the person I am calling.
I have an HTC Touch HD with WM6.1pro and cannot find a way to do it. If I connect to the access number, then at the prompt go to my address book and dial a second number, it assumes I want to have two separate calls and puts the access code on Hold... which is not what I want! I do not remember all my friend's numbers, so I do have to use the address book.
With my old nokia n95, once connected I could go to the menu and say I want to dial a DTMF which is the tone you hear when dialing a normal phone. This allows me to follow on with calling the number I need while connected to the call.
Is there a way of doing this on WM6?
I have a kind of work around. I edit my international friends phone numbers as a "car phone" and the numbers look like this
02081802828 p 0027115555555
the access code, then I add p to pause then their number.
The HUGE problem is that when I dial any of my international contacts, the phone displays the same person... so no matter who I call internationally, it always shows a photo of my friend Ian, and displays his name instead of the person I am actually speaking to. I think this is a bug where WM6.1 only looks at the first 11 characters of a number, but the problem is, all my intl numbers have the same first 11 numbers.
Help MUCH appreciated, thanks,
Mark.
livegod said:
Hello,
I often use an access code to dial internationally, and once I am connected to that access number, I have to enter the number of the person I am calling.
I have an HTC Touch HD with WM6.1pro and cannot find a way to do it. If I connect to the access number, then at the prompt go to my address book and dial a second number, it assumes I want to have two separate calls and puts the access code on Hold... which is not what I want! I do not remember all my friend's numbers, so I do have to use the address book.
With my old nokia n95, once connected I could go to the menu and say I want to dial a DTMF which is the tone you hear when dialing a normal phone. This allows me to follow on with calling the number I need while connected to the call.
Is there a way of doing this on WM6?
I have a kind of work around. I edit my international friends phone numbers as a "car phone" and the numbers look like this
02081802828 p 0027115555555
the access code, then I add p to pause then their number.
The HUGE problem is that when I dial any of my international contacts, the phone displays the same person... so no matter who I call internationally, it always shows a photo of my friend Ian, and displays his name instead of the person I am actually speaking to. I think this is a bug where WM6.1 only looks at the first 11 characters of a number, but the problem is, all my intl numbers have the same first 11 numbers.
Help MUCH appreciated, thanks,
Mark.
Click to expand...
Click to collapse
Don't know if it will work... but you coud try (using Advanced Config) to increase the number of digits used to "match" the numbers in the contacts... for example to 18 or 19 numbers... but I cannot immagine what other "consequencies"could happen...
Let us know !
Regards,
K
Hi Kostas
It seems that the problem is actually with spb Mobile Shell and not windows mobile.
When I dial using the windows mobile dialler, it gets the name and picture right, but when I use spb's dialler it shows the wrong person and name...
I will chase it up with them... and thanks for the good idea, unfortunately the Call ID Match does not help the problem.
Efgaristo!
Mark.