I hate doing this, but I have searched fruitlessly for the registry setting that stops the Wiza going into auto lock when it is docked.
Although this has been posted before, I can't find the thread, can someone help?
Related
Hello again all,
Has anyone figured out how to change the screen sensitivity on the 8525? I have been searching all over the place and haven't found an answer. I saw a couple of threads talking about going into the HKLM/Software/Drivers/Touch and editing that registry, but that one doesn't even exist on the Hermes. I went through and tried to find the "Touch" registry, and the only ones I found sounded like they just dealed with the calibration of the screen and not the sensitivity. Please help me out if you know! Thanks!
-- Nick
I am using the Jaguar 3.1 WM6 custom rom. I think there is a hack that re-enables T9 predicitve text, because every time I go and disable it in Settings/Input, it somehow re-enables itself.
I really, really HATE predictive text. It pisses me off. It is annoying. PLEASE, I have read the wiki's, searched the forums, googled...I am pretty sure there is a reg entry to permanantly disable this bane of my texting existence. I just cannot find it.
If anyone knows of a hack to disable or even delete T9 texting, please, I would appreciate knowing what it is. As always, thanks in advance for your time and input.
A little action makes for a happy woman
Cue the stripper music...
gyrate, wiggle, bounce, and...
BUMP
anyone find a cure to my T9 woes yet??? If there is a fix anywhere, I'd love to know about it. Again...thanks.
--->BUMP<---
Folks, still looking for a registry hack to PERMANENTLY DISABLE predictive text (T9 sucks). I want to go beyond Settings/input/etc...I want the damned thing off for good, never to return!!
Can anyone point me in the right direction?
Please?
I have seen threads in other device sections, but none for the Wiz. Also there is a cab in the "Black Diamond" thread that says it disables T9, but it would not work...it is perhaps sensitive to that rom. After 2 months, I still have not found where to look for T9 in the reg settings and purge this f**king thing for good...or at least disable it.
No replies? Maybe you're not asking the right people...
Can't even FIND T9 as a feature/option on my Wizard. Are you sure you're even in the right thread, here? Seems like you should post this to the Wizard WM6 thread, not the standard Wiz thread...
Myrddin Wyllt said:
Can't even FIND T9 as a feature/option on my Wizard. Are you sure you're even in the right thread, here? Seems like you should post this to the Wizard WM6 thread, not the standard Wiz thread...
Click to expand...
Click to collapse
T9 is an option via settings/input. I had it on WM5 and it is still on WM6...I don't know if it is called specifically T9...but it is listed as word completion. I do not want to make a duplicate thread, so I won't re-post in WM6. I would like to permanently disable the WORD COMPLETION feature. It will often re-engage after a reboot, then I have to go in and untick everything. I don't want to even have to worry about that...I want it dead. Reboot or not, I want it to be set as keyboard WITHOUT any word completion settings...ever. I thought perhaps in the registry under HKCU/ControlPanel/Sip...but from there, I am unsure which action would kill the T9 feature.
If anyone has any ideas to help me out, I'd really appreciate the direction to go, so that I can disable word completion...for good.
Thanks.
Ok...so going into my reg entries...I modified the sip to be "0" from previously being "4". I powered off, not soft reset...but on power up, it restored to "4" again. When I go into Settings/input/word suggest and untick, it changes from "4" to "0". So what I am wondering is this...
Is there perhaps a different number modification I need to enter to permanently disable this, or can I just flat out delete this sip entry?? And if I delete it, will it just come back on the next reboot, or conversely, would deletion harm my device?
HKCU/ControlPanel/Sip/SuggWords = 0x0 (0) (when unticked...also via physical modding of registry) I would like this HKCU/ControlPanel/Sip/SuggWords = 0x0 (0) entry to remain permanent despite resets.
Help...please. I'm getting frustrated.
Hi... I have a similar problem.
I want to disable the predictive text functionality but I can't seem to find a way to do it. Even when I disable on the settings it still keeps prompting the words, this is really annoying when typing on IM.
Any clue to fixing this??
Were you able to find a solution for your case?
txs
I have been searhing the forum for a few weeks now and can not seem to find a post that has a regestry hack to disable Clear Type in the off position for the entire phone. I have a Samsung Omnia running WM6.1 Professional and even though I can go to Start>Settings>System>Screen>Clear Type and un-check Enable Cleartype, everytime I turn off the phone or hard reset it automaticly re-checks Enable Cleartype and I have to go back and uncheck it everytime. I would like to find a registry hack to where I can disable in the off position for good. Any help would be greatly appreciated.
Just looking to find an answer....
cakek said:
I have been searhing the forum for a few weeks now and can not seem to find a post that has a regestry hack to disable Clear Type in the off position for the entire phone. I have a Samsung Omnia running WM6.1 Professional and even though I can go to Start>Settings>System>Screen>Clear Type and un-check Enable Cleartype, everytime I turn off the phone or hard reset it automaticly re-checks Enable Cleartype and I have to go back and uncheck it everytime. I would like to find a registry hack to where I can disable in the off position for good. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Depending on what phone you have... just find Advanced Config and set it with that.
If You Hard Reset Your device ewen registry hack won't work. But this is some sort of errors of the system in Your device...
Sorry, I meant "soft" reset, not "hard" reset.
Hi Cakek,
You can try this. It worked for me.
Have a good time..
this is the wrong place for questions,
please refer to the Q&A section
thank you
Hi all,
Ive got a really annoying issue with my phone, when installing updates for a couple of shortcuts Ive got on the home screen tab, the original version got uninstalled and now the shortcut block I had them in is permanently disabled. Nothing on there, it doesnt launch anything and when I try to add a program in there just nothing happens.
Has anybody else had this issue and/or know of a way to sort this problem out?
I've had this issue, and the only one solution was hard reset of the phone. Sorry..
Check the regisrty at HKLM\Software\HTC\Manila\Home.
There you will find the settings for the QuickLinks.
You might change/delete settings to re-enable editting your links.
Sorry I'm an amateur -.- How do I get there?
bollockface said:
Sorry I'm an amateur -.- How do I get there?
Click to expand...
Click to collapse
You might use the search on top of this page and type "registry editor" in there
You could try this http://forum.xda-developers.com/attachment.php?attachmentid=327813&d=1274135081
It resets sense to its default values.
Hope this helps you
need help... i can no longer find the settings for predictive text, auto replace, and keyboard swipe... can't remember what i did... last time i remember was playing with tasker and secure settings which i don't think may have caused the problem... please see screenshot... is there a way i can restore the settings without re-flashing my phone? thanks!
admins, please delete this thread... i apologize as i was only able to find a similar problem when i changed my search keyword to "keyboard"... this thread has provided a solution to my problem: http://forum.xda-developers.com/s7-edge/help/predictive-text-gone-t3378422