I recently aqquired an XDAmini S, and it has been fine up until a couple of days ago, the very center point of the screen (where the first crosshair appears in screen alignment) doesn't respond to touchscreen not only does it make playing Mahjonng impossible but it also means I cannot properly align my screen. Any ideas that could help resolve this issue please?
I got the same problem, i don't have a solution but i think it's hardware related. I have a trick to pass the screen alignment, you will have to edit the registry (HKLM\HARDWARE\DEVICEMAP\TOUCH\MaxCalError) originaly is set to 16 (decimal) and i changed it to 40 (decimal) and I get passed the screen alignment also I have cooked my own ROM with that value so I don't get stuck on that step.
Forgot to say that you don't have to tap at the center you should tap at some point near the center. Also your screen won't be aligned very good as the error could be some big.
Related
I own a Dopod 900 for a year and the warranty has expired.
Some days ago, the screen is malfunctioning..
I have aligned more than 10 times on that day.
Since then, i have to align the screen a few times a day.
Does anyone have clues on how to solve that? (if need repairment, how much will it cost in $USD?)
If so, remove it and test the response from the Touch Screen.
Screen protectors can interfere with the sensitivity and accuracy of the Touch Screen.
Attempt to re-align the screen by going to Start>Settings>System Tab>Screen and then tap on Align Screen or press and hold the Center Navigation key and then press the Internet Explorer Button. Note: To ensure accuracy, Screen Alignment must be completed using the device Stylus and no other object
with this I solved my problem with qtek 9000
And im assuming because of the crack is why I cant align the screen, because I'll try to do it and what happens is it will go through the alignment process over and over (never tried more then 6 times).
Is there some way I can get around this? My main phone (BB Pearl) was smashed into pieces after loseing it off the top of a car.
Thans for the help!
PS. Its a Wiza200 if that matters
It is not clear if your touch screen works fine. If it does, then there is no need to do screen alignment. If for some reason the screen is not aligned, you can force feed the calibration data by setting the HKLM\Hardware\Keymap\CalibrationData registry variable.
kernelguy
Hi to u all
i have a major problem with the screen alignment
there was a small damage on the foil thats on the screen of the tytn
Now i have flasht a new rom image and got stuck on the screen alignment
i can press the small X and it will move and starts over and over again
is there a way to bypass the screen alignment
Hope there is someone who has a solution
You need a cab install called remote screen alignment. You also need another Hermes to get the alignment settings off.
''remote Screen Alignment gets the alignment settings and stores it on your pc. If for some reason you require them to be re-entered but can't do so manually it can fix this. It was originally intended for people with poor eyesight or other problems who had trouble hitting all 5 points on the calibration. Its a freeware cab.
Hope this helps...
Hi everyone! im new to the forum So Ello everyone))) I,v had my wizard fr a month now and it was fine untill screen alignment become bad so i press on button and button next to it opened. Because of this i have clicked on Screen Align to align the screen but it started to loop (( dont know why because touch screen it self works perfectly. So what i supposed to do to align my screen? im using my phone by keyboard now because i just cant press any button on screen because it needs alignment. THX to anyone who has read this.
The wizard doesn't like being kept in a pants pocket. If you press with your finger firmly, running it all around the edge of the screen, that might cure the temporary insanity. Otherwise, set it aside (not in your pocket) for several minutes and try again. I got a leather belt case for mine to cure this issue.
If I'm guessing right, the first problem was that the touchscreen seemed to be very weird, so you tried to re-align it, and it always fails.
noup the problem was that i have bought the phone about 3 weeks ago it was working but when i tried screen alignment it just started to loop. I pressed it about 50 times(them 5 crosses) i dont know what to do (( because screen alignment now is crap (to exit screen alignment i need to get off battery and put it back)
After a busted screen I replaced the LCD and Digitizer. After that I didn't make any changes to the software (ROM, nor settings) of the HTC.
LCD works fine, but my screen alignment is bad. On almost all items I have to thick on one item beneath it to get it, also some items are not reachable due to this problem.
I managed to start the alignment proces with the use of the Remote Alignment tool, alle goes well but the upper two crosses. The digitizer simply doesn't respond to these and after al while starts over again.
Is it normal that you have to align your screen after a digitizer replacement?
Will it help to hard reset my HTC? (I'm using a hacked ROM, last one from Dutty WM6.5, so it doesn't start automatically with the alignmentproces)
When the upper crosses don't respond in the alignment proces, does this mean the Digitizer isn't ok?
I found a thread about Remote Screen Alignment on this board (/showthread.php?t=355010). Will this help for me? The phone is almost unusable so installing / using PHM Registry Editor will be almost impossible.
Lot of questions, hoping for some answers
Almost 2 days, 69 views and no answer?
Please guys, I'm missing my beloved HD