sorry for may bad english.I have two router cordega and airlive.After few minuts xperia disconnect to wifi everytime.I upgrade firmware to cordega and airlive but nothing.Any help...
well, power option and uncheck standby power off mode
I have a problem with connecting G1 to my router SparkLAN WRTR-142. The only way to connect with it is disabling Power Save for the WiFi module.
Unfortunately in G1 there's no such option... so I'm connected and I see signal strength but internet simply doesn't work.
Is there any solution to disable Power Saving?
p.s. sorry for my english
Is there a way to turn off the cell network signal
I can turn off mobile data, wifi, bt, etc but is there a way to turn off the cell telephone network itself.
my goal is to have my phone not send out one wireless signal at all.
tried to search for this but didnt have any luck.
thanks
hold down power on button for like 3 seconds and select "airplane mode"
How change Wifi Power Level to save battery ? For example at my home, my Wifi acces is at 2 meters...
I don't think it works like that - a wifi receiver as in the A500 consumes as much power as it need to get the signal. It's the transmitter (on your router) that can be changed to save power.
Can the A500 be used ans a wifi repeater-type thing, to extrend wifi range (if so, then it would use more power to do that)?
The WiFi is an transceiver full-duplex
So, sure in receiver you can't change anything in consumption, but in transmit if you change the power in transmitting, your decrease the power in consumption of energie
Hard to imagine wanting to reduce your WiFi signal. Most hardware and software if made to optimize the signal. If you're trying to reduce power consumption try something like "CPU Tuner" which adjusts many factors both automatically (or fine tuned by you) to improve battery life.
The other option of course is to turn off WiFi if you don't need it constantly. Put a switch on your home page to allow quick on/off capability to make it a snap to do this on the fly.
LePocketPc said:
How change Wifi Power Level to save battery ? For example at my home, my Wifi acces is at 2 meters...
Click to expand...
Click to collapse
I had the same issue with my first a500-16gb, I called acer support, described the issue and they directed me to exchange the unit. The second one worked normally and could get a good signal throughout the entire house.
On closing the case they indicated that there were a batch of units identified with defective wifi chips on-board.....
Hi all, I want to present a scenario in which 3G data and wifi both are turned on at the same time. Android gives priority to wifi connection and uses it. In wifi "advanced settings":
1. Network notification is TURNED OFF
2. Keep Wifi on during sleep is set to ALWAYS.
Now suppose the Wifi signal is no more available maybe because of a power failure at the Router's end, Android switches over to "Data" connection. In this case, will the android continously search for the lost wifi signal and hence consumes a significant amount of battery power?
Thanks in advance