___________________
The U is for UMTS (3G), however i too have no MMS settings, if anyone can help it would be much appreciated.
Thanks
I installed the MP_MMS3.2_HTC_GenS_Hermes_061110.CAB and MMS showed up under messaging again.
HTC TyTN 1.35.255.2 ExtROM WWE (English)
LOCK:Enabled
CAB: \Extended_ROM\PP_ExtVersion.CAB
CAB: \Extended_ROM\P_Generic_UI.CAB
CAB: \Extended_ROM\PP_ace-certs.CAB
CAB: \Extended_ROM\MP_MMS3.2_HTC_GenS_Hermes_061110.CAB
CAB: \Extended_ROM\MT_PC_Hermes_HTC_REG_060918.CAB
CAB: \Extended_ROM\MT_Shortcut-MMS-Hermes.CAB
LOCKisabled
RST: Reset
Related
I just did the hard reset / soft reset on my T-Mobile MDA Compact. I can now see the extended ROM.
My goal is to have all the functionality I need, without useless programs (E-mail wiz and others) taking up space. I also want as little branding as possible.
What do I need to install from the extended ROM?
you have to modify the config.txt in your Ext_Rom
Something like this for .cab file from Ext_rom
CAB: \Extended_ROM\PPCTahoma.CAB
CAB: \Extended_ROM\Registry_p02.ARM.CAB
CAB: \Extended_ROM\Version_AKU2a.sa.CAB
CAB: \Extended_ROM\VideoMMS.sa.CAB
CAB: \Extended_ROM\VNKbrd2K3Lite.CAB
CAB: \Extended_ROM\Wisbar1.3.CAB
...
and this for .cab file from Storage card
CAB: \Storage\AM.cab\ArcReader.CAB
CAB: \Storage\AM.cab\DateMate.CAB
CAB: \Storage\AM.cab\FastCleanup.CAB
CAB: \Storage\AM.cab\MMS16012_WWE.sa.CAB
...
So you will have 32mb for you prefered sofwares
Just make sure that they are correct - other wise....
Thanks, but I understand HOW to make an extended ROM config.
Let me rephrase my question:
On the MDA Compact extended ROM, there are a number of programs that would normally be installed by default. Which of these do I really need (should I install)?
Hy Dylan,
there is no 'optimal' configuration for the extended rom. There are no programs in it which are needed to work as a phone. You should install all programs for the camera and maybe MMS.
All other programs are options (in my opinion)
Hi Dylan
I think you should not remove the followings
CAB: \Extended_ROM\CallerIDB31_Hima2_WWE.CAB
CAB: \Extended_ROM\CameraB70_Hima2_WWE.CAB
CAB: \Extended_ROM\CameraB70_Streaming_reg.CAB
CAB: \Extended_ROM\ExtendedROMUnlocker.CAB
CAB: \Extended_ROM\MIDI561.sa.CAB
CAB: \Extended_ROM\OEM_AKU2a_WWE_04010401.sa.CAB
CAB: \Extended_ROM\Version_AKU2a.sa.CAB
CAB: \Extended_ROM\VideoMMS.sa.CAB
CAB: \Extended_ROM\MMS16012_WWE.sa.CAB
sorry bad dial-up
I was wondering the same.. For some of the items it's obvious what they do but for some it's not.. Which ones does one 'need' ?
The orange cab is as follows
EXEC:Extended_ROMcusTSK.exe WindowsOrange.tsk
CAB: Extended_ROMSigned_SSD_Shortcu t_FRE.sa.CAB
CAB: Extended_ROMSigned_SSD_WLanMgr _Orange_Icon_FRA.sa.CAB
CAB: Extended_ROMSigned_SSD_BTUR_Pa tch_For_BT_Cannot_Initial.sa.C AB
CAB: Extended_ROMProtoKey_Default.s a.CAB
CAB: Extended_ROMSigned_DiscoButton 8.sa.CAB
CAB: Extended_ROMSigned_OCH_GER_KB. CAB
CAB: Extended_ROMSigned_OCH_Suspend Resume.sa.CAB
CAB: Extended_ROMSigned_Orange_UASt ring.sa.CAB
CAB: Extended_ROMSigned_UNI_Orange_ Sound_Set.sa.CAB
CAB: Extended_ROMSigned_OR_HomeScre enReg.sa.CAB
CAB: Extended_ROMSigned_UNI_pIE_Vie w_Set.sa.CAB
CAB: Extended_ROMSigned_USSD_Orange .sa.CAB
CAB: Extended_ROMSigned_OCHFR_Voice MailErrMsg.sa.CAB
CAB: Extended_ROMSigned_ORCH- FR_Conn_113132.sa.CAB
CAB: Extended_ROMSigned_ORCH- FR_Cuss_113132.sa.CAB
CAB: Extended_ROMSigned_Version.sa. CAB
CAB: Extended_ROMUNI_BrowserPerform ance.sa.CAB
CAB: Extended_ROMUNI_Orange_2G3G_ic on.sa.CAB
CAB: Extended_ROMCAB-Customization- OrangeOCH-FRA-Universal-01-05- 15Aug05.CAB
CAB: Extended_ROMCAB-Shortcut- Orange-19Aug05.CAB
CAB: Extended_ROMEnable_VT_RTPlugin _0727_2_signed.CAB
CAB: Extended_ROMRingtone_FRA_reg_0 727_signed.CAB
CAB: Extended_ROMUI_Orange_FR_0727. cab
Some of them are self explanatory but I ma looking for the Cab file that installs the orange theme as wella s the cab that installs the DV Player
Thanks
I use winimage to add file and edit config.txt.
I added this file to
Signed_TMOUSA_Setting_pIE_Wiz10810102.sa.CAB
CAB: \Extended_ROM\Signed_WIZ_RILEnableEONS_2.sa.CAB
CAB: \Extended_ROM\Signed_TMOUSA_Connection_Wiz10810101.sa.CAB
CAB: \Extended_ROM\Signed_TMOUS_MCCMNC.sa.CAB
CAB: \Extended_ROM\Signed_TMOUS_Favorites_1810102.sa.CAB
CAB: \Extended_ROM\Signed_tmobile_email_notification_2005PPC_NET_rom_12202005.CAB
it stuck when running customize
thanks
hi all,
i have been looking/reading through many threads/forums to learn one thing but it seems that either nobady knows how to do it or just dosnt want to shere this info i hope i will find this solution here!
what i am after is some info on how to create ur own ExtRom. i have unlocked the ExtRom of my mda pro using buzz's tool (thx buzz) and deleted all cabs cos i want to modify and costumize my extended rom. here is a list of file i had :
LOCK:Enabled
EXEC:Extended_ROMcusTSK.exe WindowsT-Mobile.tsk
EXEC: Extended_ROMWifiTempON.exe
CAB: Extended_ROMPP_TMO_WiFi_SSID_U NI.CAB
EXEC: Extended_ROMWifiTempOFF.exe
CAB: Extended_ROMSigned_SSD_Shortcu t_WWE.sa.CAB
CAB: Extended_ROMSigned_USIM.sa.CAB
CAB: Extended_ROMSigned_STK_3_18_1_ 0.CAB
CAB: Extended_ROMPP_TMO-UAProf(2.0) _UNI_130134.CAB
CAB: Extended_ROMPP_TMUK- Conn_UNI_130149.CAB
CAB: Extended_ROMPP_TMUK- Customization_UNI_130193.CAB
CAB: Extended_ROMPP_StreamDefault_T MOUK.sa.CAB
CAB: Extended_ROMPT_AudioQuality- Patch(TMO)_UNI.CAB
CAB: Extended_ROMPP_TMUK_Mediaspeed _33600.sa.CAB
CAB: Extended_ROMPP_TMUK_Policy4107 _UNI.sa.CAB
CAB: Extended_ROMP_Version.CAB
CAB: Extended_ROMMP_Customization_T MUK_Universal(AKU2.0) _060215.CAB
CAB: Extended_ROMMP_CVSDcpl_2006022 0.cab
CAB: Extended_ROMMP_EmailWizDB_PPC_ TMOUK_060216.CAB
CAB: Extended_ROMMP_PictureVideo_re g_signed.CAB
CAB: Extended_ROMMP-Shorcut-MMS1- JAVA6XX-CV-VOICE-EmailWiz-TMO- 051215.CAB
CAB: Extended_ROMEnable_VT_RTPlugin _0727_2_signed.CAB
CAB: Extended_ROMPP_TMUK- UXC_20060224.CAB
CAB: Extended_ROMPT_CommManageV0911 _UNI.CAB
CAB: Extended_ROMP_ClockAlwaysOnTop .CAB
CAB: Extended_ROMPT_TMUK_UXC_BrandB rowser_UNI.CAB
CAB: Extended_ROMP_Remove_CS_Connec tion.CAB
CAB: Extended_ROMP_RemoveMSNToday.C AB
LOCK: disabled
RST: Reset
in addition there is also AutoRun file which i believe is responisble for installing CABs from the extended rom acording to config.txt
so far i have read that by editing config.txt and performing hard reset my device will autinstal the cabs i will provide eg. my config.txt would look like this
LOCK:Enabled
EXEC:Extended_ROMcusTSK.exe WindowsT-Mobile.tsk
EXEC: Extended_ROMWifiTempON.exe
CAB: Extended_ROMPP_TMO_WiFi_SSID_U NI.CAB
EXEC: Extended_ROMWifiTempOFF.exe
CAB:|Extended_ROMspbplus.cab
CAB: |Extended_ROMother_file.cab
CAB: |Extended_ROMother_file.cab
LOCK: disabled
RST: Reset
so after performing hard reset i should get all the files from extended rom (from config.txt) installed, right ?
but in fact it is not happenenig for some reasons. i dont know why and i would like to know..can someone explain how to do it. only the cabs which were pre-instaled in ExtRom are getting installed and all "my" CABs are not.
i would be really greatful if someone could help me with this issue and i bet there is many people interested in this topic. thanks in advance
cudo
how is that possible people that there is so many of you and no one cant help ? c'mon !
Hi., I spent this last weekend tinkering with my Alpine, stuffing the ext rom with all the apps i would normally install after a hard reset, pretty sucessfully, I think.(I used Deathnoise's Rom as a base)
However, I have two questions.
1 - Stability. How important is the installation order of the cabs in the config.txt file? Everything works brilliantly, but there are one or two stability issues. Most noteably with the Pocketbreeze 2k3 today plugin. When i try to close off tasks as complete, it hangs (most of the time) and also sometimes the device takes a while to boot after a reset.
Is this perhaps to do with the order of my config.txt? or is it more likely that the release i'm using is not quite stable?
2 - Is there a .bat file or equivalent that can be executed from within the config.txt file?
Specifically, I want to automate the following as part of the install.
a - copy the loadvdisk link into the startup folder (even tho i have removed the delete shortcut cab, the lnk is not there after i do the install)
b - load a few registry tweaks and move a few files around as part of the install
c - set the button lock so that it locks when i go to standby
My config.txt file is as follows
CAB: \Extended_ROM\Alpine_SMS05272005.sa.CAB
CAB: \Extended_ROM\Alpine_UniDir_20051114001.sa.CAB
CAB: \Extended_ROM\BandSel_WWE_11250401.sa.CAB
CAB: \Extended_ROM\IPV4_132.sa.CAB
CAB: \Extended_ROM\Caller_ID_Alpine_Generic_WWE_RC16.CAB
CAB: \Extended_ROM\Certificate.CAB
CAB: \Extended_ROM\CV2.41.386_wwe.CAB
CAB: \Extended_ROM\Fix_dual_SIM.sa.CAB
CAB: \Extended_ROM\O2UK_removeACCEPT_12212004.CAB
CAB: \Extended_ROM\PhonePad_Alpine_Generic_WWE_RC11.CAB
CAB: \Extended_ROM\Patch_Camera_9650.sa.CAB
CAB: \Extended_ROM\Patch_Eraphone.sa.CAB
CAB: \Extended_ROM\Patch_Update_SIM_Mgr_2.2.1.0.sa.CAB
CAB: \Extended_ROM\SmartDialing_Alpine_Generic_WWE_RC13.CAB
CAB: \Extended_ROM\Version.sa.CAB
CAB: \Extended_ROM\VideoMMSB22.sa.CAB
CAB: \Extended_ROM\PressKey.sa.CAB
CAB: \Extended_ROM\wap.CAB
CAB: \Extended_ROM\activex.cab
CAB: \Extended_ROM\mCubeSafeMode.cab
CAB: \Extended_ROM\msn8update.CAB
CAB: \Extended_ROM\BTProfiles.cab
CAB: \Extended_ROM\o2_uk_contract_ppc_v2.0.cab
CAB: \Extended_ROM\Explorer2003_Handango.ARM.CAB
CAB: \Extended_ROM\FtpAddin_p.ARM.CAB
CAB: \Extended_ROM\Registry_p.ARM.CAB
CAB: \Extended_ROM\MultiIE.arm.CAB
CAB: \Extended_ROM\pmusic.arm.cab
CAB: \Extended_ROM\PocketInformant_English.ARM.cab
CAB: \Extended_ROM\PocketPlus.arm.cab
CAB: \Extended_ROM\calenderplus.cab
CAB: \Extended_ROM\PocketBreeze2003.cab
(A whopping 2k free space left over!)
Im about to start rearanging the entries according to the config.txt files of both Pug and Deathnoise, but thought id put the Question out there before i get elbows deep in cooking.
Currently running.....
R 1.04.00
G 1337.42
D 1.11.00 WWE
Thanks in advance
Sam_