I found a registry change that enabled the Time Zone Screen under phone options a while back; had to do a hard reset and can not re-locate the message.
Any help would be appreciated
Thanks
See the "AKU2 ROMs Tweaks" section of this Wiki page.
marka2k said:
I found a registry change that enabled the Time Zone Screen under phone options a while back; had to do a hard reset and can not re-locate the message.
Any help would be appreciated
Thanks
Click to expand...
Click to collapse
look for "ShowNITZPage" under hklm/software/oem/phone
change default from 0 to 1.
no soft reset required.
cheers
Thank you for the replies, I did a search earlier before posting and for some reason did not come up with anything.
Related
Hey, just found for another forum a fix for the WMP problem that other people and me was experiencing.
The problem occurs when you click the landscape mode in WMP it stays portrait.
The solution is that, you can try adding
HKLM\System\GDI\Rotation\LandscapeMode=1 to the registry.
Mine was originally set to 0 so i changed it to 1, and it worked.
Hope this helps
THANK YOU!!!
stek1988 said:
Hey, just found for another forum a fix for the WMP problem that other people and me was experiencing.
The problem occurs when you click the landscape mode in WMP it stays portrait.
The solution is that, you can try adding
HKLM\System\GDI\Rotation\LandscapeMode=1 to the registry.
Mine was originally set to 0 so i changed it to 1, and it worked.
Hope this helps
Click to expand...
Click to collapse
YES! IT WORKED! Have been looking for a solution for this for quite some time... Thanks for the help!!
wmp problem in landscape
yes it works but when you reboot the phone it returs again to 0 any other solution... thanks
then after reg setting press the power button wait at least 15 sec and then press reset, after this operation the setting will be memorized until hard reset
xplode said:
then after reg setting press the power button wait at least 15 sec and then press reset, after this operation the setting will be memorized until hard reset
Click to expand...
Click to collapse
Hi Xplode,
This doesn't work. I had done what u said but it still reset to 0 after reset. I had even changed the setting for the "LandscapeFixed" value to 1 to try it out. After reset, the "LandscapeFixed" value remains as 1, but the "LandscapeMode" value reset to 0. Any idea?
Sorry for the noob question..
stek1988 said:
Hey, just found for another forum a fix for the WMP problem that other people and me was experiencing.
The problem occurs when you click the landscape mode in WMP it stays portrait.
The solution is that, you can try adding
HKLM\System\GDI\Rotation\LandscapeMode=1 to the registry.
Mine was originally set to 0 so i changed it to 1, and it worked.
Hope this helps
Click to expand...
Click to collapse
sorry.. but i'm new here.. i just bought my new xda 2s.. and upgraded it to wm6.. but the problem is i don't know how to tweak..where would i change this stuff??
again i'm sorry for a noob question..
I've been searching around quite a bit but have been unable to find solutions for what I would like to do to my PPC.
I have a hermes running At&t wm5 with no intention of upgrading yet;
but my questions are:
1. I would like to change the icons of the programs in all of my menus such as start>programs and start>system>settings. I assume a program or patch, as well as a lot of work is needed. Any ideas how to go about doing this?
2. I want to change the 2 bottom soft keys on the today screen (phone/contacts) to Lock / Contacts. As in just hit my left hard or soft key to lock the phone.
Any help is much appreciated
(Also, sorry if this is the wrong forum)
Sirgatory said:
I've been searching around quite a bit but have been unable to find solutions for what I would like to do to my PPC.
2. I want to change the 2 bottom soft keys on the today screen (phone/contacts) to Lock / Contacts. As in just hit my left hard or soft key to lock the phone.
Click to expand...
Click to collapse
try the attached file for this... called softkey changer.
hey. thank you for the app! I tried it but unfortunately it did not have an option to place the device lock as a soft key.
so unfortunately both problems are still left unsolved =/
I have been searhing the forum for a few weeks now and can not seem to find a post that has a regestry hack to disable Clear Type in the off position for the entire phone. I have a Samsung Omnia running WM6.1 Professional and even though I can go to Start>Settings>System>Screen>Clear Type and un-check Enable Cleartype, everytime I turn off the phone or hard reset it automaticly re-checks Enable Cleartype and I have to go back and uncheck it everytime. I would like to find a registry hack to where I can disable in the off position for good. Any help would be greatly appreciated.
Just looking to find an answer....
cakek said:
I have been searhing the forum for a few weeks now and can not seem to find a post that has a regestry hack to disable Clear Type in the off position for the entire phone. I have a Samsung Omnia running WM6.1 Professional and even though I can go to Start>Settings>System>Screen>Clear Type and un-check Enable Cleartype, everytime I turn off the phone or hard reset it automaticly re-checks Enable Cleartype and I have to go back and uncheck it everytime. I would like to find a registry hack to where I can disable in the off position for good. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Depending on what phone you have... just find Advanced Config and set it with that.
If You Hard Reset Your device ewen registry hack won't work. But this is some sort of errors of the system in Your device...
Sorry, I meant "soft" reset, not "hard" reset.
Hi Cakek,
You can try this. It worked for me.
Have a good time..
this is the wrong place for questions,
please refer to the Q&A section
thank you
Hi,
I have a HTC HD2 and have read about people changing the settings with different codes but I don't understand how to do It can anyone help?
Also if anyone could answer the below?
Can my alarm be made to turn on my phone?
How to choose different Alarm sounds?
Any help appreciated.
Lez.
you need to download resco registry editor...
i was confused with this aswel untill i found resco on here...didnt want to ask though lol
be careful though, changing the wrong thing can leave you with a £600 brick
edit: as for the alarm thing, on the set alarm screen just above where it says vibrate it says alarm sound, click that.
Messing with the registry will not turn it into a brick. At most you have to do a hard reset and start all over again.
ahdai said:
Messing with the registry will not turn it into a brick. At most you have to do a hard reset and start all over again.
Click to expand...
Click to collapse
ahh...dunno where i read that then lol...good to know (Y)
any advise will be greatly apreciated
On the home screen of my diamond 2, below the touchflo slider icons i have two links one is 'Phone' the other is 'Camera'.
Basically i want to change the 'Camera' link to 'Contacts' or 'All People' so i can quickly access my contacts.
Im sure this is possible, can any one point me in the right direction.
Many thanks in advance
yasinism
yasinism said:
any advise will be greatly apreciated
On the home screen of my diamond 2, below the touchflo slider icons i have two links one is 'Phone' the other is 'Camera'.
Basically i want to change the 'Camera' link to 'Contacts' or 'All People' so i can quickly access my contacts.
Im sure this is possible, can any one point me in the right direction.
Many thanks in advance
yasinism
Click to expand...
Click to collapse
SoftKey registry is located in HKLM\Software\HTC\Manila
You have both LSK and RSK path and text.
thanks for the reply
Dont realy want to go into the registry as i am not very experienced, is there some sort of app or cab that i can use?
thanks
yasinism
yasinism said:
thanks for the reply
Dont realy want to go into the registry as i am not very experienced, is there some sort of app or cab that i can use?
thanks
yasinism
Click to expand...
Click to collapse
I think TD2 Tools may be able to set soft keys.
Its really easy and there are instruction if you search.
again thanks for the reply
I have TD tools instaled, but there is no option to remap soft key or buttons
yasinism said:
again thanks for the reply
I have TD tools instaled, but there is no option to remap soft key or buttons
Click to expand...
Click to collapse
**Edit, removing program**
tried keyswop but it didnt work for me
managed to get it working with diamond tweaks but it only had a set amount of programs to choose from, i wanted 'HTC people' version of contacts but it only listed the windows mobile layout of the contacts... yeah i know i am being a bit picky!!!!
is there any way of adding htc people to the list?
Thanks for all the advice mate
I just find this:
http://tiltmobility.com/remap-your-today-softkeys/
Softkey Changer didnt work for me im afraid......thanks for the info my friend.
The search continues !!
Maybe this:
http://forum.xda-developers.com/showthread.php?t=589305
You may try HDTools or Advanced Config aswell, I remember it worked for me when I had WM6.1, but should work also with 6.5, since the registry keys are the same in that area.
EDIT: I thought that it wouldn't be very smart to install a whole app just to get one tweak..so I made a little .cab that should link the Left Soft Key to Contacts. Tested and working on my device, I hope it works for you!
Install on your device (not SD) and soft reset, that's it. To revert to previous configuration just uninstall the .cab in the usual way.
That may help You forum.xda-developers.com/showpost.php?p=3292483&postcount=2
thanks for the ideas i will try them out.
This forum is awsome and thanks to everyone for taking the time to reply.
yasinism
I'd go for FdcSoft SoftkeyAppletEx.cab it's free and simple a real WYSIWYG application
Have fun,
Senax