Using HKLM settings - HD2 General

Hi,
I have a HTC HD2 and have read about people changing the settings with different codes but I don't understand how to do It can anyone help?
Also if anyone could answer the below?
Can my alarm be made to turn on my phone?
How to choose different Alarm sounds?
Any help appreciated.
Lez.

you need to download resco registry editor...
i was confused with this aswel untill i found resco on here...didnt want to ask though lol
be careful though, changing the wrong thing can leave you with a £600 brick
edit: as for the alarm thing, on the set alarm screen just above where it says vibrate it says alarm sound, click that.

Messing with the registry will not turn it into a brick. At most you have to do a hard reset and start all over again.

ahdai said:
Messing with the registry will not turn it into a brick. At most you have to do a hard reset and start all over again.
Click to expand...
Click to collapse
ahh...dunno where i read that then lol...good to know (Y)

Related

Registry Searching --> Developers or People With Registry

Hello,
I have a question. Maybe someone knows on this forum???
Where can I find the keys which change the speaker icon in the taskbar? Next tot the phone signal there is a speaker icon. It changes to vibrate and silence when selected. Which keys in the registry do this? How is this icon changed?
I kow it is possible, because some apps support this, but I can't find how to do!
Thanx for anyones help!
No one knows? Anyone should......
Where is this one switched in the registry? Which value changes???
Hope some can help!
Phone Profiles from JGUI can do.... So someone should know about this...
Help would be really appreciated, then developing can go on!!! With I hope an excellent product for everyone!
what makes you think that those programs use the registry to change icons or what ever it is you are talking about
Rudegar said:
what makes you think that those programs use the registry to change icons or what ever it is you are talking about
Click to expand...
Click to collapse
Sorry, don't get your point exactly! I try to let the icon (volume icon) get changed programmaticaly, like it changes when changing the volume to vibrate or off.
I suspect that it is done bu the registry! Any other ideas? Anyone knows how this is done? Someone should know....
Are you actually wanting to mute the volume aswell ?
Try looking in HKey_Current_user\Control Panel\Volume (don't have a PPC here atm, so can't check)
Otherwise, I would export your registry, change the setting to vibrate manually, then export again. Copy both these to your PC and compare them.. there are many programs that can do this for you to make life easy
well maybe it's a function in the api / sdk / framework of the pocketpc phone edition
whats make you think it's set in the registry?
Rudegar said:
well maybe it's a function in the api / sdk / framework of the pocketpc phone edition
whats make you think it's set in the registry?
Click to expand...
Click to collapse
Well, that was the first thing that came to me. I saw it in the application of JGUI I stated above and though that it should be a registry value. I couldn't think of any SDK / Framework / API, because that would make it almost impossible to implement it like this.
The volume can be muted as well, but for now the muting volume and vibration is done already, but I am still looking for how to change the picture of the volume icon.
Rudegar, do you have any idea then???
Swifty said:
Are you actually wanting to mute the volume aswell ?
Try looking in HKey_Current_user\Control Panel\Volume (don't have a PPC here atm, so can't check)
Otherwise, I would export your registry, change the setting to vibrate manually, then export again. Copy both these to your PC and compare them.. there are many programs that can do this for you to make life easy
Click to expand...
Click to collapse
The key you gave me indeed changes when setting some different volume settings. But I didn't find any key yet in that place which changes the picture I mentioned. Anyone?
Why could no one tell me about this? No developer has ever tried to hack this picture? Any ideas are welcome!
may lightning strike me down for posting a microsoft link here
but maybe the today screen is what you need to be able to edit to get what you want.
I'm not 100% sure, but it may point you in the right direction.
http://msdn.microsoft.com/library/d.../html/ppc_programming_pocket_pc_2002_eiuz.asp
the registry has nothing to do with what you want to do.
ctitanic said:
the registry has nothing to do with what you want to do.
Click to expand...
Click to collapse
What is doing the trick then? Why can't I manage to change these icons until now? Anyone??
those icons are located in one of the OS dlls. I believe that it's in the mfce300.dll Maybe you can change it creating a .mui for that dll but I'm not sure.

Need help - Registry Edit for notifications

I recently modified the registry on my ATT 8525 to eliminate the SMS Sent notification message (thanks to those that posted the info here, it's a god send!)
Anyways, during the process I inadvertently modified the wrong notification line and now I do not get any notifications when my alarm clock goes off (other than it going off to wake me up). I can't snooze it or even turn it off though, as the notification prompt doesn't appear.
I now have to turn off the volume, modify sounds/notifications to all off, and wait about two hours for the system to stop activitating the alarm. Needless to say I've missed many a phone call during this two hour "silent" timeframe.
Can anyone tell me where this is and what the setting should be?
Thanks in advance for your help.
Jester1 said:
I recently modified the registry on my ATT 8525 to eliminate the SMS Sent notification message (thanks to those that posted the info here, it's a god send!)
Anyways, during the process I inadvertently modified the wrong notification line and now I do not get any notifications when my alarm clock goes off (other than it going off to wake me up). I can't snooze it or even turn it off though, as the notification prompt doesn't appear.
I now have to turn off the volume, modify sounds/notifications to all off, and wait about two hours for the system to stop activitating the alarm. Needless to say I've missed many a phone call during this two hour "silent" timeframe.
Can anyone tell me where this is and what the setting should be?
Thanks in advance for your help.
Click to expand...
Click to collapse
Hmmmm... after looking over the wiki I can't see that you affected anything else in that directory...
Was the change you made in the HKLM\Software\Microsoft\Inbox\Settings directory???
You might need to hard reset to get rid of the problem (resetting the registry back to stock). But I would wait to see if anyone else here has info that could help you.
I suggest you look around and get the palm threaded sms app (you can warez it well!).... Its the best thing since sliced bread! (Just make sure to change the default mms settings, original .cab was based on sprint network, but its very easy to change)
My two cents...
intrglctcrevfnk said:
Hmmmm... after looking over the wiki I can't see that you affected anything else in that directory...
Was the change you made in the HKLM\Software\Microsoft\Inbox\Settings directory???
Click to expand...
Click to collapse
I don't recall. What I did was change what I thought was the setting. Then I sent a text. It didn't work, so I changed it back and started over. I did this three times. I think I changed something and forgot to change it back? Problem is I don't know what I didn't change back
I really don't want to do a hard reset, but I'm getting to that point. Now my phone alarm won't go off -- I think there are too many notifications back logged. When I soft reset it sounds like it's trying to play 100 alarms all at once
Can anyone else help out?
Indeed it may have happened anyway as the notification queue does get clogged. So before a hard reset you could clear duplicates using the likes of Scarybear Check Notifications (freeware) OR Sktools OR Memmaid neither free but have many other features beside clearing duplicate notifications.
Mike
Thanks for the advice...however, I can remove the notifications HKCU\System\State but it's only temporary. (scarybear does not list that program on their site any longer)
I really need to find out how to get notifications turned back on!
I know it's a reg edit that I missed changing back, I just don't know which one as I didn't realize the problem for a couple of days.
Anyone else have any help? Surely someone out there knows where these notifications are in the registry
Personally I say just take an hour of your free time and hard reset. Make sure everything is all good.
You might also use a program like HTCustom to do the regedit for you next time. That way you won't inadvertantly change anything.
Well I was really hoping to avoid a hard reset when all I need to do it make one simple registry change But it does appear that I may have to do it since no one seems to know where this change needs to take place.
I've probably spent an hour going through the registry looking for anything that could possibly be the alarm notification, but I've had no success.
Thanks to those of you that offered advice, I do appreciate it. Guess it's time to bite the bullet.

[problem] WM 6.5 slide lock problem: UNKNOWN CALLER ID when in suspend/power off mode

there is a problem with WM6.5 roms lock slider:
if a call comes in & the lock is active but the phone is in suspend (power off or manually pressed the power button) the call will show "unknown caller"
you will not see the name until you answer od then you can see it later as missed call
this is annoying as you can not screen the calls & answer/ignore the ones you like
the slider lock will show the name only if the sceen has not turned off yet (did not enter suspend mode yet)
is there any fix out there?
I am thinking if someone knows how to make the screen light dim firest the turn off only (without power off / suspend) then it will work
anyone has a registry tweak to just turn screen off & leave the ppc running without suspend?
or any other fix????
i like to use the wm6.5 lock, i know i can use S2U2 but i prefer this one & hope we can fix it
thanks
Same issue !
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
HTC phone canvas is first to present ID caller then in communication WM6.5 lock is activate by Suspend mode in communication... because Chobit Smartlock is in use... other i have the same issue like You...
unknown caller with WM6.5 lock when it s suspend mode...
i agree, if anybody knows how to solve this problem... i buy it !
lesscro said:
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
Click to expand...
Click to collapse
hmm i couldn't get the smartlock to work for me on my xperia
i used CsDevCtrl and it's sorta working... it auto locks my device if the backlight turns off or if i manually put it in suspend mode *power off button* and locks on wake up.... has a bunch of features i'd never use so it's a bit more complex than i'd like. but even with that auto lock i still get the unknown caller... i'll have to read more about htc phone canvas.. i'm not really liking the xperia dialer anyway... never have...
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
again tho.. these problems might just because it's not the offical build yet... these problems may be worked out with an offical release... nothing i can't live with at the momemnt
so i still have no luck with this unknown caller ID issue
i am sure someone knows the registry tweak..as many programs just use screen off
for example media player as you can play music while screen is off
or S2U2 can lock / turn off screen but leave phone working unsuspended
please help
Thanks
I've noticed this also but if you use a dialer that has its own slide to unlock then it tends to work fine..at least for me anyway..
It does take about 2 seconds for it to go from unknown caller to who it actually is though..
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Hmmm, after showing Unknown for the Caller ID this morning, now the caller ID is showing up on wake. Strange. Only thing I have done was install the sdkcerts cab. I'll test further.
no caller id in tmobile wing after installing s2u2 1.62
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
killerskincanoe said:
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
Click to expand...
Click to collapse
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
ekksman said:
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Click to expand...
Click to collapse
Thankssssssssssssss
that trick worked with my phone
the fix was simple & there the whole time and i did not know...
its good...not perfect (should work by itself) but at least now i know who is calling
again thanks for your input
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
thanks, but i checked my registry
& i do not have callidMatch at all there???
aa125690 said:
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
Click to expand...
Click to collapse
i have eten rom build 21501 & on other phone 21510 and both have same problem
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
I tested this out, no help. But the power button trick works...hmmm. I wonder what's going on and why this works?
21501 and same problem on
htc titan.
AWESOME! thx you!
ahmedfikry said:
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
Click to expand...
Click to collapse
DUUUUUDE... haha thx!
u got right on that.. i'll download and give it a try.
although i haven't yet had the chance to check since my latest ROM update if it was just the rom or 6.5... but i'll test and reply with results THX AGAIN!
p.s. i wonder if above mentioned power button trick will work with my alarm situation on the lock screen.. willl also investigate!
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
killerskincanoe said:
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
Click to expand...
Click to collapse
Yes. I notice that the cuts happen when the video plays (the small arrows to the left and right of the slider) Once that times out, the music is contiuous.
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
Thanks!! this worked for me. Using "Udk WM6.5 BETA2 21500 - base v2.04" (device= Touch Diamond)

Turn off beep when call connects

When you dail a number on your phone and you press the call butten it makes a beep. Even when the phone is in silent mode it does that.
Is there a way to turn off this beep?
I tried the sound settings but nothing worked.
Turn off the call connect notification in settings > phone > advanced (some vibrate some beep some do both)
Bupahs said:
Turn off the call connect notification in settings > phone > advanced (some vibrate some beep some do both)
Click to expand...
Click to collapse
Just tried it.
It just turns off the vibration but not the beep.
Maybe it's just my phone...
But thanks for the quick answer.
Razorrrr said:
Just tried it.
It just turns off the vibration but not the beep.
Maybe it's just my phone...
But thanks for the quick answer.
Click to expand...
Click to collapse
it's not just you
it's like a several tones pulse in the background, several minutes ofter I connect.
obededom said:
it's not just you
it's like a several tones pulse in the background, several minutes ofter I connect.
Click to expand...
Click to collapse
Really? I have never heard the beeping.. might be a network thing
Yup it is really weird. Could be as you say that my providex is the problem.
Oh well we just have to live with it
Great phone otherwise.
Ive got the beep problem too, and you can turn it off with a regedit:
HKCU/SOundcategories/callstart
Then turn the initvol value to zero
This does stop it but the only problem i have is that when i reboot the beep returns for some unknown reason, anyone know why?
JcNeji said:
Ive got the beep problem too, and you can turn it off with a regedit:
HKCU/SOundcategories/callstart
Then turn the initvol value to zero
This does stop it but the only problem i have is that when i reboot the beep returns for some unknown reason, anyone know why?
Click to expand...
Click to collapse
Tnx
Going to try it later on.
First i have to find a reg editor.
On my diamond2 i used total commander.
Hope it works on the snap.
dont drive urself nuts with reg edits..
sktools is the answer for that, amongst many other things you may want to tweak.
once dl'd and installed to device :
sktools> tuneup> phone edition "Beep Before Start Call" = NO
SoCalSpecialist said:
dont drive urself nuts with reg edits..
sktools is the answer for that, amongst many other things you may want to tweak.
once dl'd and installed to device :
sktools> tuneup> phone edition "Beep Before Start Call" = NO
Click to expand...
Click to collapse
Nice!! I forgot all about SKTools, had it on my Excal but never put it on my new Dash 3G.
Just checked, the beep is off by default on the Dash 3G, I turned it on to see what you guys were talking about.. man that beep is annoying as hell.
Bupahs said:
Nice!! I forgot all about SKTools, had it on my Excal but never put it on my new Dash 3G.
Just checked, the beep is off by default on the Dash 3G, I turned it on to see what you guys were talking about.. man that beep is annoying as hell.
Click to expand...
Click to collapse
Yeah I know
Installed SKTools an now its gone
Tnx guys
glad i can help guys!
thats what we're all here for..to help eachother out!
SoCalSpecialist said:
dont drive urself nuts with reg edits..
sktools is the answer for that, amongst many other things you may want to tweak.
once dl'd and installed to device :
sktools> tuneup> phone edition "Beep Before Start Call" = NO
Click to expand...
Click to collapse
strange enough, I cannot turn this issue, as there is nothing on the phone edition...
any suggestions?
Dash 3G Call Initiation Beep
I need help...i am using the sk tools lite to edit the registry as suggested, but I cannot navigate to the HKCU/SOundcategories/callstart because it only shows HKCR, HKLM and no results found.
I have tried following the directions here, but need a little more guidance.
I am making calls in the evening and would really like to disable the call initiation beep (1 quick beep). I have no other beeps (such as minute timer) or disconnect tone.
If someone could please reply with specific instructions on how to navigate and disable, I would truly appreciate it. I have also tried a master reset, because I thought that at one point, I had found a way to turn it off (and i wouldn't hear it at all) but that was when i first got the phone a year ago. I can't remember how to turn it off now, I thought it was in one of the settings options, but have been through each one a dozen times, and still cant find it.
Please? anyone? Thank you.
I am using the HTC Snap, and I have the same problem as you. I cannot search HKCU using SKtools
However, using Mobile Registry Editor, I can access the registry on the HTC Snap, and going thru this path:
HK_Current User > Control Panel > Soundcategories >CallStart,
and changing the initVol to 0, I can get rid of the beep
However the change doesn't stick.
It reverts back to the irritating beep whenever I restart the phone or change profile... Anyone can help?!
Help anyone?

How I can disable DTMF tone for phone keyboard?

Sorry for stupid Q., but I didn't found A. for it in WIKI and Tips.
Im very unhappy for DTMF zzzzound when I pressed numerical keys in telephone mode. How I can disable it? Regedit or something?
No regedit needed, go to settings, menu-all settings-personal-phone and put keypad to 'off'
First thing I do personally after a hard reset! I hate the tones too, and they slow down dialling even on the Leo.
mkent_barbados said:
No regedit needed, go to settings, menu-all settings-personal-phone and put keypad to 'off'
First thing I do personally after a hard reset! I hate the tones too, and they slow down dialling even on the Leo.
Click to expand...
Click to collapse
Thanks, I knew that is was stupid Q.
Ive tried to do this without SIM cart and because I can't saw this options.
mkent_barbados said:
No regedit needed, go to settings, menu-all settings-personal-phone and put keypad to 'off'
First thing I do personally after a hard reset! I hate the tones too, and they slow down dialling even on the Leo.
Click to expand...
Click to collapse
Thanks! helped me too. (not quite straight forward it is to turn off in HTC Sense for the question to be stupid.. d

Categories

Resources