Database Users

bt issue |2k3SE|

Hey when i try to enable my BT it says "There is no Bluetooth hardware instaled on this device."
What shall i do?

Mr-Sale said:
Hey when i try to enable my BT it says "There is no Bluetooth hardware instaled on this device."
What shall i do?
Click to expand...
Click to collapse
Go to your extended ROM >>> see if there is a BT.cab there, and of so run it. Otherwise you may have to reflash the ROM. Maybe others will advise differently.

Nope...that aint there... i searched a few extended rom compilations but couldnt find any BT.cab or similiar cab

BT
Mr-Sale said:
Nope...that aint there... i searched a few extended rom compilations but couldnt find any BT.cab or similiar cab
Click to expand...
Click to collapse
en
Given we are using the same ROM version (Sin's merged), then I think the drivers are there but it sounds as thought the icon (BT_Icon.cab in the ROM) may be missing. What you could do is download BTH Tools v.1010 from XDA-Developers ... I found it yesterday by doing a search. This is installed from a PC and may help you get it going. It is not a BT engine, merely a means of activating/deactivating BT and it shows which battery is in use as well.
I have a weird one as well in that my BT works well in connecting with a laptop computer, but when I use it with a Plantronics M3000 BT earpiece, I have to re-do the connection the hard way (i.e., pair the damn thing) after every time the XDA II is suspended. I don't think it is the Plantronics device (which is a piece of ****e in my experience) alone .... will sort it even if I have to buy a better BT earpiece. Maybe others have some advice??

XDAIIi Bluetooth A2DP patch

Bluetooth A2DP patch.
Alternatively, you can get it from
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab

great but not having any clue on what or how to use the file....
could you please give me an idiot guide... assume you are explaining to a brick wall, thats how much i know about doing things.
Many thanks and i am serious... i want to be able to use it but dont have a clue

just copy the .cab file to your device and click on it! It will install it....

For O2 Mini
Will it work for O2 Mini? Thanks

Problem with the Cab
wat is the Cab file?
the files ending with .008 or other where is the cab file?
how i can findin or make the Cab file?

since adding this file i have been running music through my BT earphones, quite nice sound but after about 1 1/2 hrs the music stops and i get an error on screen saying not enough memory to run bluetooth perform a soft reset to clear the problem. this is with the XDA2i just sat on the table doing nothing but playing music via WMP.
anyone else had this?

in order to stop me getting carried away with posts. anything to do with this problem for me could you please post here. http://forum.xda-developers.com/showthread.php?t=282036
many thanks dont want to hi jack this thread anymore with my probs.

A2Dp cab file
Dear sirs
thanks a lot for registering me within your group,
i have one problem my device is [O2 Atom XDA excu] and i tried to connect with wirless head phones Jabra 620BT and it connects only as hands free but their is no option to activate as stereo music ao i download this file i already got it from Alpine forum of this site activate A2DP profile but whed instaled it to the device its screen doesnt work with the stylus pen only by buttons so i didnt know what is going tried to make soft reset several times but trhe same even by exchanging the battery and put it again no way so i did hard reset for it and send you this mail to find the solution for my wirless head phones to let it play music to help me for this soft were confliction

It is Not working with Mini S
Hi All, I am using O2 Xda Mini S. I have installed the patch tried using Motorola H500, I was able to communicate with the headset using Phone Calls, but the Audio is not streaming rather Since i have installed it, all the Mp3 that i Have showing as "cannot play the file. The file is either corrupted or the player does not support the format trying to play".
PLEASE HELP ME I AM IN DIRE NEED OF THIS.

Could i ask about BT that works with:
Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP) and Audio Video Remote Control Profile (AVRCP) at same time.
It will be great, because now if i turn on hands-free i need restart BT for listening the music witn high quality, because BT doesn't work properly.
I made a topic http://forum.xda-developers.com/showthread.php?t=341764, so please answer here or in the topic please...
Thank you very much.

jeffkewin said:
Bluetooth A2DP patch.
Alternatively, you can get it from
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
Click to expand...
Click to collapse
any for avrcp??
thx in advance

Bluetooth patch
There is no exe file in ther so it wont do any thing my i mate sais no bluetooth hardware installed after replacing the backup battery any ideas please

Where exactly can I see what this update updates?
My version is still the same after the update.

Hermes (JasJam) Bluetooth Stereo

Appears to be an oxymoron, 'coz mine will only play in Mono via Bluetooth. Stereo OK via cable headset....
Anyone got fix?

tropo said:
Appears to be an oxymoron, 'coz mine will only play in Mono via Bluetooth. Stereo OK via cable headset....
Anyone got fix?
Click to expand...
Click to collapse
1. welcome to XDA-Dev
2. are you sure you use your stereo headphones in WIRELESS STEREO mode ("Set as Wireless Stereo" in BT manager), not as HEADSET?

Stereo - Mono BT Connection
Thanks for the quick reply Menneisyys, Originally I had it selected as both Handsfree and BT Stereo. Uninstalled it and re-paired as Bluetooth Stereo only. The Sony HBH-DS970 Headset still only receives in mono. Same problem with sending from the Hermes to a Motorola DC800 stereo gateway. Both receivers play perfectly in Stereo from the laptop, but only in mono from the Hermes. ????

joint stereo that is. easy registry hack should fix it.
correct settings are:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings]
"UseJointStereo"=dword:00000000

SecureGSM said:
joint stereo that is. easy registry hack should fix it.
correct settings are:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings]
"UseJointStereo"=dword:00000000
Click to expand...
Click to collapse
Yup, it should make sure it's in stereo (BTW, what app could have messed it up, that is, set to 1 (mono)?); also see http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1400&more=1&c=1&tb=1&pb=1 where I've also elaborated on this value.

Menneisyys said:
Yup, it should make sure it's in stereo (BTW, what app could have messed it up, that is, set to 1 (mono)?); also see http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1400&more=1&c=1&tb=1&pb=1 where I've also elaborated on this value.
Click to expand...
Click to collapse
OK, I give up. Have tried to install both PHMRegdit and VidyaReg on my JasJam to fix, but neither will install on the mobile. They dont come up in the install options list on the installer. Bit of a novice here. Appreciate any advice. Havent played with the registry before.
Thx.

tropo said:
OK, I give up. Have tried to install both PHMRegdit and VidyaReg on my JasJam to fix, but neither will install on the mobile. They dont come up in the install options list on the installer. Bit of a novice here. Appreciate any advice. Havent played with the registry before.
Thx.
Click to expand...
Click to collapse
The PHM Regedit MSI file is known NOT to work (see the Registry Bible: http://www.pocketpcmag.com/blogs/menneisyys/UltimateRoundupOfRegistryEditors.asp ) on XP boxes. Therefore, I've uploaded the CAB file for you to http://www.winmobiletech.com/sekalaiset/regedit.Rpr_ARM.CAB

Legend!
Menneisyys said:
Yup, it should make sure it's in stereo (BTW, what app could have messed it up, that is, set to 1 (mono)?); also see http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1400&more=1&c=1&tb=1&pb=1 where I've also elaborated on this value.
Click to expand...
Click to collapse
Thanks mate! Fixed. I hope whoever pays you pays you well!!

Menneisyys said:
...(BTW, what app could have messed it up, that is, set to 1 (mono)...
Click to expand...
Click to collapse
AFAIK, Joint stereo=1 is default settings for many ROMs.

Menneisyys said:
The PHM Regedit MSI file is known NOT to work (see the Registry Bible: http://www.pocketpcmag.com/blogs/menneisyys/UltimateRoundupOfRegistryEditors.asp ) on XP boxes. Therefore, I've uploaded the CAB file for you to http://www.winmobiletech.com/sekalaiset/regedit.Rpr_ARM.CAB
Click to expand...
Click to collapse
Well done - works fine on Orange SPV M700 WM5. Why ms have lock it in mono anyway?
Many thx, mate

Audio routing

I KNOW I KNOW, WIDCOMM stack...but what I want to know is basically can I route audio properly to my mono plantronics headset. I used to do this with my Wizard, and the headset routes audio fine during phone calls. Why can't a small program force this connection for streaming music. I don't care if it sounds like crap, i just want to be able to listen to it. ARGH this is driving me crazy. Any help would be nice.
If you are just going to say "try the widcomm stack" please don't. I read it doesn't play well with MS Voice Command and I use VC too much to not be able to have it function properly. Thanks in advance...

I used BTAudio Toggle with my 8125 and the 640 (to listen to MP3's off of TCPMP or WMP). Have you tried it on your current phone?

scharnet said:
I used BTAudio Toggle with my 8125 and the 640 (to listen to MP3's off of TCPMP or WMP). Have you tried it on your current phone?
Click to expand...
Click to collapse
yes, none of these programs seem to work with the 8525...but they did work with the 8125...

I know you don't want to hear it, but upgrade to WM6, and then apply Widcomm stack and MS vc 1.6. Works great. As a matter of fact, I installed it because Ms VC didn't seem to work right with ms bluetooth stack. Now, plantronics 640 works great, all audio is routed and MS Voice Command works flawlessly....
I have found all you need is the bbs_hermes_03.cab file (can't remember the exact name) from this post. the other files were not needed by me. Ran the cab file and everything worked
http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72

Yeah th BBS_Hermes_03 works, it reroutes audio to bluetooth once activated. But the down side is DUN and Bluetooth active syn don't work no more.

hksmr2 said:
Yeah th BBS_Hermes_03 works, it reroutes audio to bluetooth once activated. But the down side is DUN and Bluetooth active syn don't work no more.
Click to expand...
Click to collapse
Sorry, I did not know about that. I don't use bluetooth DUN, or Bluetooth Active Sync. Bluetooth is much to slow for that to me..

eagle 1 said:
Sorry, I did not know about that. I don't use bluetooth DUN, or Bluetooth Active Sync. Bluetooth is much to slow for that to me..
Click to expand...
Click to collapse
hrmmm, i'm running wm6. I'll give that a try later today. I didn't read anyone saying that in the thread. I'll give it a try.

I got a weird one. I connected my pda to my pc via High Quality Audio profile.
Now when I play a music file on my PDA, I get no sound from my speakers, but, upon going into Sounds Control Panel in Vista, I see the Bluetooth Microphone is receiving the data. When I stop the song, the data stops. When I play, it starts. How do I reverse this so that when I play a song, it shows up on my PC as output and not input, this is strange...

Here is a mortscript I wrote to accomplish this:
http://gthing.net/scripts/index.php?option=com_docman&task=doc_details&gid=8&Itemid=2
Works on my 8525

hksmr2 said:
Yeah th BBS_Hermes_03 works, it reroutes audio to bluetooth once activated. But the down side is DUN and Bluetooth active syn don't work no more.
Click to expand...
Click to collapse
I installed this but it does not work AT ALL. I can't even use my bluetooth to talk on the phone.......wtf?

gthing said:
Here is a mortscript I wrote to accomplish this:
http://gthing.net/scripts/index.php?option=com_docman&task=doc_details&gid=8&Itemid=2
Works on my 8525
Click to expand...
Click to collapse
Apologies and apoplexies for the OT.
Hello gthing: Can you point me to a tutorial on using mortscript for us mere "mort"als? (The root "mort" sure is weird - dead man writing?
I am not highly technical, but want to understand some of the things I run across in the forum better.
Thanks
Ben

gthing said:
Here is a mortscript I wrote to accomplish this:
http://gthing.net/scripts/index.php?option=com_docman&task=doc_details&gid=8&Itemid=2
Works on my 8525
Click to expand...
Click to collapse
Not sure if it's the same mortscript I'm using, but in the MS VC Bluetooth thread there is one posted as well.
Using the steps there, I'm quite easily able to switch from VC to mono audio routing.
Someone summed the steps up quite nicely, do a search for my name pkley towards the end of that thread...

BigBen said:
Apologies and apoplexies for the OT.
Hello gthing: Can you point me to a tutorial on using mortscript for us mere "mort"als? (The root "mort" sure is weird - dead man writing?
I am not highly technical, but want to understand some of the things I run across in the forum better.
Thanks
Ben
Click to expand...
Click to collapse
Just install mortscript (find RC9) and then the mscr files will run as applications. You can put them in your applications folder and even run them using voice command if you have it.
If you want to write your own scripts, it comes with documentation, and you can find a few examples at gthing.net/scripts <----would really appreciate more scripts on that site if anyone has any they can upload.

gthing, thanks for the reply! I am going to look into this!
Ben

Ok, none of these things help...in fact the wicomm stack doesn't work with my bluetooth headset (plantronics 320) and I can't even un-install the damn thing. It just locks up my phone in the endless spinning rainbow wheel, or literally freezes. More-over none of these replies help as far as routing all sound from my phone to a MONO bluetooth headset...

gthing said:
Here is a mortscript I wrote to accomplish this:
http://gthing.net/scripts/index.php?option=com_docman&task=doc_details&gid=8&Itemid=2
Works on my 8525
Click to expand...
Click to collapse
Thank you - works perfectly !

Bluetooth pairing diagnostics?

Hi all,
I am unable to pair my XV6800 to my Pioneer DEH-P980BT car stereo. The phone detects the stereo and requests the PIN, but fails after I enter the PIN with a 'Cannot Connect, connection failed or pin is wrong' error. I have used this stereo with my xv6600 Blue Angel for over a year (Can you say Widcomm stack?).
Anyway, I have been unable to come up with fruitful answers or even a next good step by searching the forums or general internet searching. I am wondering if there is some kind of Bluetooth tool that would allow me to determine what actual error is occurring?
Any help would be greatly appreciated.

I had the exact same problem with the same head unit. Here's what I did to correct it:
Code:
The vario II identifies itself as a PDA bluetooth device. The pioneer modules are searching
for a phone or smartphone, so it just ignores the Vario II.
Solutions:
Change the COD (Class of Device) from a PDA device to a smartphone device.
This can be done this way:
1. First make sure you've got a backup, or remember all settings you change in the registry.
2. Edit with a registry editor the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
By default my vario II does have the value: 1048852 (decimal)
Change this to: 5374476 (decimal).
3. Soft restart your device
4. Voila! Your device now identifies itself as a smartphone, and my pioneer unit finds it without problems.
That SHOULD work for you. Please let me know if does, because when I do it, the stereo finds the handset fine, but I can't hear any conversation coming out the speakers. It's like it is on permanent mute. This also happens with my BT headset - all controls work, but I can't hear anything nor can people hear me. Plus, my Mogul's speaker cracks and pops when I try using it with another BT device. I think it may be a bad unit. I want to know if you have better luck with the Mogul and 980BT.
I am using the newest ROM (2.17) and radio. The same thing happens to me with the older 2.09 ROM also.
sup191

Eureka!
It worked! I had tried this COD change before and had tried initiating pairing from the stereo, but had not tried both at the same time. I am able to connect the phone and bluetooth stereo simultaneously, and both are working with excellent sound quality. That's leap and bounds from where I was yesterday. Thank you very much!
Regarding your problems, I am not experiencing them at all. I can hear both sides of a conversation as can the other side. As it stands I think I will have to manually pair every time I get in the car (a pain, but I will work on it).
I am not sure what differences exists between the Hermes and Titan, but I would be happy to investigate for you wherever I can. My ROM is version 2.09 and my radio is version 1.30.
Thanks again. Feel free to post or PM me if I can help you figure your issues out.

Thanks for the offer to help. I think my first step is going to Sprint and showing them that BT is crap on my Mogul and see if they'll swap it for me. I'm also going to try pairing my headset there on the demo and see if it works. If it does, my unit it broken. I'll let ya know what happens.
sup191