Related
go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.
Very good tip...will try that!
Cheers...!
Works on QTEK S100 with Jabra Bt 250 Headsets?
Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!
...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?
for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?
Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.
yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.
blueangel
would this work on a blueangel running WM5?
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....
Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.
sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.
I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.
Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.
Mine is working fine. I really like the way its now.
Thanks a lot.
Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.
Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..
Hi,
I been trying the BtAudioNav to redirect sound to my bluetooth hands-free but it doesn't work on my Trinity.
Anyone has try it with success?
Most mono-headsets do not support the A2DP profile.... so it is to be expected that this doesn't work for music and stuff...
However, i had it working once on my old Fujitsu Loox 600...can't remember how i did that though, but it has a different BT stack anyway...
Or do you just mean the phone-calls being redirected does not work ? Please try to be a bit more specific
Phone-calls works but for example redirect sound from GPS soft to headset not!!. With BtAudioNav should works but with my Trinity not.
Not all phones are capable of directing all audio to the mono bluetooth headset using the handsfree/headset audio gateway profile. Many of them are designed to ONLY stream voice calls. I'm not sure if this is due to the hardware or software (possibly a combination?), but some phones are capable of streaming/redirecting all audio entirely (as well as mic input) to the mono headset. I guess the Trinity doesn't. I've only heard of a few phones that actually work with that BT audio utility you're using, and they seem to be mostly older models, but that's just a guess. Anyway, perhaps there's a way to redirect all audio through the stereo bluetooth profile instead?
1. Copy the folder BTAudio and its contents to \Program Files
2. Using a registry editor amend the following entries from:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Path = \Program Files\BTAudio\BTAudioOn.Exe
VoiceCmdDuration = 86400 (DEC) = 24 hours
3. Softreset
What does the above tool do exactly?
Tiemen said:
What does the above tool do exactly?
Click to expand...
Click to collapse
Yeah...i'm very curious to what this does too...
Could this by any chance connect a Stereo BT headset in Audiomode by just clicking the .exe ? (ie not having to go into BT settings in the comm manager screen ?)
Moaske said:
Yeah...i'm very curious to what this does too...
Could this by any chance connect a Stereo BT headset in Audiomode by just clicking the .exe ? (ie not having to go into BT settings in the comm manager screen ?)
Click to expand...
Click to collapse
Yes, can you please be more specific as to how this works? Does it interfere with voice dialing or making/receiving calls?
I have an Axim X50v which works just great with Skype and my mono Flamingo BT headset. Now I have an HTC P3600 and Skype won't work through the headset.
Bloody technology seems to go backwards :-(
Thanks.
qyach said:
1. Copy the folder BTAudio and its contents to \Program Files
2. Using a registry editor amend the following entries from:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Path = \Program Files\BTAudio\BTAudioOn.Exe
VoiceCmdDuration = 86400 (DEC) = 24 hours
3. Softreset
Click to expand...
Click to collapse
After editing, VoiceCommand function is LOST .
All sounds will be re-directed to the blutetooth headset when you press the button(voice dial) on the headset.
Guys, please DO read my past articles and/or use the forum search engine to look for them. At http://forum.xda-developers.com/showthread.php?t=281977 , I've explained everything you need to know.
Did anyone get BTaudio working on their Trinity?
BtAudioToggle opens a link with my mono headset ( I hear hissing in ear piece) but media still plays through Trinity speaker.
I read the Hermes forum about a different reg hack. http://forum.xda-developers.com/showthread.php?t=278778
Whats working for people?
Perfect audio re-direction with Jasjar & Jabra BT250v
that was very neat & BRILLIANT !!!
got my Jabra BT250v without knowing these issues. on discovering that my jasjar was not capable of audio re-direction to Jabra.....I was shattered. ROM upgrades r scary to say the least.
after a day of frantic search & many failed softwares, this one did the trick. 'qyach'.....many thanks for this.
now my Jasjar & Jabra work perfectly with TCPMP & Skype. Voice command continues to work from the Jasjar mic.
I couldn't ask for more.
THANK U ONCE AGAIN !!!
Tried VJVolubilis, Bluemusic and BTAudio (with both of the 2 registry hacks referred to in this thread). None of them worked on my Trinity. Would very much appreciate someone shed more light on this issue.
qyach said:
After editing, VoiceCommand function is LOST .
All sounds will be re-directed to the blutetooth headset when you press the button(voice dial) on the headset.
Click to expand...
Click to collapse
Doesn´t work on my Trinity
Edit: don´t know why but now it works. Only that I have to press the voice dial button twice (?)
Hi,
I got the Motorola T305 to connect to my TyTN and the audio gateway routed to the T305. Everything sounds great but I get this annoying beep once every 5 seconds. Does anybody know how to get rid of it?
Thanks,
Sean
JUST SORTED IT on my TRINITY all workin fine
Only problem is, as the article suggest it disables the voice commands!! I can live with this as I only want to stean the TOMTOM voice when using the satnav while walking or on my bike.
What I had in mind was a a couple of icons, one to make the registry changes for the BT Audio streaming and the other icon to toggle back (ie change the registry back to voice comand via the BT headset). As far as I can see (once BTaudioOn.exe is copied to my Trinity) the only difference between turning my Jabra BT250v into an audio streaming headset and a phone headset are the two registry changes; and then change them back to give me a Phone headset again.
Can anyone tell me if this is possible to use a .REG file?
Can it be written on a PC and then copied to the Trinity so that it runs?
Will reg files run the same on a PDA and they do on a PC?
Thanks in advance
New app?
Can anyone make an app in which you can configure which feature you want?
1) Change to Voice Dail
2) Change to Voice Command
3) Change to a redirection program like BTAudio.
and got to set the delaytime too
Destination Gotland Bluetooth Mono Sound.cab
I installed this, no registry changes, etc. and it works great. you toggle between unit speaker and the headset by hitting the button on the BT headset. It is great for Skype.
The Cab is in the Zip. I think I picked it up off the tutorial here:
http://forum.xda-developers.com/showthread.php?t=281977
Battery Problem
OK, the solution I posted does work well. However it just killed my battery life. I think that whenever the BT is paired, even in the regular mode (not streaming to the mono BT) it uses the full amount of battery as if it was streaming to it. I think the battery life was even reduced without a paired headset as long as BT was not disabled.
I guess I am still looking for a better solution too.
qyach said:
After editing, VoiceCommand function is LOST .
All sounds will be re-directed to the blutetooth headset when you press the button(voice dial) on the headset.
Click to expand...
Click to collapse
THANK YOU !!!! works purrrrrrrrrrfect !!
After reading very long threads about this issue, many changes in the registry and some full pda restores, I haven´t found the way to redirect all the sounds to the handsfree in my TRINITY.
Has anyone managed to make BTAudio or any other program work with a Trinity?
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
2 Types of Redirect
One is with A2DP where the bt device is compliance to it. I do not have one but I believe it will work fine.
Another way which I am using is via the Handsfree Voice Command channel. When a voice command software(Such as Cyberon Voice Speed Dial) is installed and when the recognition is triggered(usually by a button on headset), all audio is redirected to the the headset.
So the trick is to keep this redirection longer.
This is can achieved by changing two registry settings.
- Change the duration to something longer, like FFFF.
- Invalidate the voice command software execution.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"VoiceCmdDuration"=dword:FFFF
"Path"="\WINDOWS\invalid_sddialer.exe"
With that, I have lost Voice command via my headset but I hardly do VC at all, and if needed, I had associated one of the button on my dopod to launch VC but I need to speak into the phone instead.
Not sure if this is the best way but it's the only way I know of untill I figure out other.
FYI, I'm currently using Dopod D810 with lvsw ROM (http://forum.xda-developers.com/showthread.php?t=299771) and a Motorolla H700.
anonimo said:
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
Click to expand...
Click to collapse
Hello,
I agree with this.
I had not been able to get the Trinity to redirect audio to a sony HBH-IV835 heandfree device.
Since I've change for a Sony DR-BT20NX headset with AD2P profile it's working like a charm. No more registry hack or software needed.
Then registry hack only concern improvement of audio quality (bitpool and so on).
Sadly i'm not able to use real stereo (replace the use of joint stereo) because it's generationg a slight annoying hiss sound.
Is this still the status, also with WM6?
I can't believe it's not possible to redirect some kind of way like I've been reading in the Tornado treads.
Yeah, I'm also can't redirect all sound to my headset (Plantronics Pulsar P590) by one click or by launch some program. Every time I need launch BT Settings, open Devices tab, tap'n hold on "590Plantronics", and select "Set as hands-free" or "Set as Wireless audio".
Can't find other ways to do it - no registry hacks, no other...
Does this help maybe?
http://pocketland.de/product.php?prod_id=36311
I did not test it yet...
No, it doesn;t work too... All discussed programs (BTARouter, BTAudioNav, BTAudioToggle) are just redirect phone calls to the my headset. No audio output at all (headset icon doesn't appear).
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
clinton said:
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
Click to expand...
Click to collapse
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
peon said:
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
Click to expand...
Click to collapse
I saw a lot of different registry hack around here..
The one thath works on p3600 is?
I've tried a lot of but no one works.
I dont't need voice dial so it can be good.
I use my p3600 with a BT Helmet.. so I'd like to listen to tom tom inside..
thanks a lot.
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
jaaphooi said:
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
Click to expand...
Click to collapse
But my bike helmet is not A2DP compliant so I canìt use it.. :-(
Still no solution?
Hi you all,
is there still no solution for the Trinity?
I am actually experiencing the skipping problem, but I would be half-glad if I could redirect audio in mono to the headset.
Please advise!
IsiT_de...
Get headset that supports A2DP profile and it works fine. I have Plantronics Voyager 855 stereo, and it works flawlessly in mono or stereo mode with modifying any registry hacks. Music sounds awesome too with this headset, just like my bose earbud phones.
Mine should be arriving tomorrow
What are you guys using for phone calls: the included wired earbud, bluetooth headset or just the speakerphone?
Do most bluetooth headsets out there work with the included bluetooth stack?
Thanks!
Bluetooth all the way!
I am using the Plantronics Voyager 510 headset works the best for me great battery life, volume etc.
Bluetooth 99% of the time, rarely use the speakerphone. (Which does, however, work well.)
I use the BlueAnt V12, which has a vibrate feature... which is userful since the phone doesn't have one built-in. It also has an LCD, which I find useful. Displays status, phone numbers, but no names. But I seem to know most numbers, and if I don't that's also informative.
BlueAnt V12 has also a great price, around $50.
Jawbone Bluetooth works great.
I have no problems with the Jabra BT800, which also has vibrate, lcd and 6 individual ringtone settings plus the one from the Ameo. Works flawlessly.
Tim
ww?.limitz.net
Excellent!
So if my BT headset goes dead, the x7500 will continue fine as a phone? Will the speakerphone be automatically activated whenever I initiate/receive a call?
andresp said:
Excellent!
So if my BT headset goes dead, the x7500 will continue fine as a phone? Will the speakerphone be automatically activated whenever I initiate/receive a call?
Click to expand...
Click to collapse
If there is no headset connected wired/bluetooth speakerphone is automatically activated for a call.
fatouraee said:
Jawbone Bluetooth works great.
Click to expand...
Click to collapse
But not if you use Microsoft Voice Command 1.6. That kills the Jawbone d.e.a.d.
Aliph have confirmed it's a MVC problem.
Kevin
andresp said:
Excellent!
So if my BT headset goes dead, the x7500 will continue fine as a phone? Will the speakerphone be automatically activated whenever I initiate/receive a call?
Click to expand...
Click to collapse
Yes. It takes about 5 seconds for the X7500 to realise there's no active BT connection and reroute to the speakers.
andresp said:
Mine should be arriving tomorrow
What are you guys using for phone calls: the included wired earbud, bluetooth headset or just the speakerphone?
Do most bluetooth headsets out there work with the included bluetooth stack?
Thanks!
Click to expand...
Click to collapse
Jabra BT8010. Works perfectly. Works even better if you upgrade the Jabra to 1.33 and follow the instructions elsewhere on the forum to get caller ID
apd said:
Jabra BT8010. Works perfectly. Works even better if you upgrade the Jabra to 1.33 and follow the instructions elsewhere on the forum to get caller ID
Click to expand...
Click to collapse
I have some problem with BT8010. The phone function is perfect, but i have problem with stereo function. The playback is clogging and the memories getting fall with wm player. Have you got any reason? I tried it with TCPMP, it's same problem, but memories dont fall.
(sorry my bad english!)
Zatesz said:
I have some problem with BT8010. The phone function is perfect, but i have problem with stereo function. The playback is clogging and the memories getting fall with wm player. Have you got any reason? I tried it with TCPMP, it's same problem, but memories dont fall.
(sorry my bad english!)
Click to expand...
Click to collapse
Sorry, works perfectly for me. Anyone else have any ideas?
bt
i use bluetooth most of the tyme wen out...although speakerfone quality is also pretty good...one way to use it as an earpiece is to make the volume REAL LOW...and then out it to the ear...although still some sound duz appear to the outside...!
kevinnugent said:
But not if you use Microsoft Voice Command 1.6. That kills the Jawbone d.e.a.d.
Aliph have confirmed it's a MVC problem.
Kevin
Click to expand...
Click to collapse
Thanks for the warning. I am just about to try 1.6 on my Jawbone.
Found this comment here - http://www.wmexperts.com/reviews/bluetooth_headsets/review_aliph_jawbone_bluetooth.html
Try creating the registry key:
HKLM\software\microsoft\voice command\speech\BluetoothPTTDelay
value = dword: 2000
Stop and start Voice Command.
I have found that this makes Voice Command 1.6 work great with the Jawbone even in the noisiest enviornments. This will open up the audio channel for 2 seconds before starting a voice command interaction as opposed to the 400ms that is the default. I think possibly the Jawbone is adapting to the ambient noise during this time. This seems to make a big difference though.
Let me know if this helps as my Jawbone will be arriving shortly.
Anyone used a stereo headset and liked it? I wouldn't mind having one that would go one ear for calls and a simple way to use both for listening to music/movies.
Pantaloonie said:
Found this comment here - http://www.wmexperts.com/reviews/bluetooth_headsets/review_aliph_jawbone_bluetooth.html
Try creating the registry key:
HKLM\software\microsoft\voice command\speech\BluetoothPTTDelay
value = dword: 2000
Stop and start Voice Command.
I have found that this makes Voice Command 1.6 work great with the Jawbone even in the noisiest enviornments. This will open up the audio channel for 2 seconds before starting a voice command interaction as opposed to the 400ms that is the default. I think possibly the Jawbone is adapting to the ambient noise during this time. This seems to make a big difference though.
Let me know if this helps as my Jawbone will be arriving shortly.
Click to expand...
Click to collapse
Why do you need to go through all athat gymnastics? I just installed voice command and it worked with Jawbone without any issues. I can't complain about battery life because I use my jawbone and Athena as regular phone, even in my open office. Maybe total 2 hours +- 30 minutes. Don't need 6 hours talk time yet I have never run out of battery yet. I charge both devices every night.
Hello,
I have installed the bluetooth toggle app on this forum. This is great as a click of the shortcut on my today screen and it routes the audio sound to the headset - another click turns it off so via the speaker - this is what I would like . But when I press it I hear a slight noise on the heatset confirming that audio is being redirected to it. Unfortunatley there is no sound/music etc it continues to comes out of the speaker and not the headset.
I have read all the other threads and trying to make sense of it.
Is it true that with the Hermes, you have to change the bluetooth stack and just can run this bluetooth app to router the audio to the bluetooth headset?
Ideally dont want to install bluetooth stack as I read that it always routes the audio to the headset and cant be turned on/off like above app.
Any advice appreciated
Thanks
-----------------------------
Jasjam with WM6 official dopod 838 - loads of apps - very happy with it
qwsoftware said:
Hello,
I have installed the bluetooth toggle app on this forum. This is great as a click of the shortcut on my today screen and it routes the audio sound to the headset - another click turns it off so via the speaker - this is what I would like . But when I press it I hear a slight noise on the heatset confirming that audio is being redirected to it. Unfortunatley there is no sound/music etc it continues to comes out of the speaker and not the headset.
I have read all the other threads and trying to make sense of it.
Is it true that with the Hermes, you have to change the bluetooth stack and just can run this bluetooth app to router the audio to the bluetooth headset?
Ideally dont want to install bluetooth stack as I read that it always routes the audio to the headset and cant be turned on/off like above app.
Any advice appreciated
Thanks
-----------------------------
Jasjam with WM6 official dopod 838 - loads of apps - very happy with it
Click to expand...
Click to collapse
Same problem with me.