HI all,
The registry changes for differentiating between gprs and edge has been enable by default however it does not seem to work. I've also tried disabling and disabling it but still nothing... I still don't see the "E"
Can anyone share some light on this please.....
Der, do you read the wiki? It clearly states there that the reg key does not work on the Hermes.
Oh..
oh.. thanks... appreciate it .... sigh*... guess i have no choice then..
Sorry, wasn't trying to sound mean, but there have been plenty of posts asking this exact same question. Plus it's also posted on the Wiki as well.
Related
Hey i was wondering if there was a bypass so the phone doesnt interupt the data connection. Is this possible? Thanks.
sorry if this is already answered. i tried searching but couldnt find what i was looking for.
nope, only 3G handsets can do that.
It can be done with a registry hack. Try searching xda-devlopers forum for "registry wizard". Its a program someone made with a bunch of registry hacks put into a nice simple program. Just dont use the default keyboard hack. It locks your wizard up and you have to hard reset.
which tweak do you check in regitry wizard to bypass this?
I dont know. I've never done it manually. Just get the registry editor. Its all automatic and you can download it from these forums if you try. i think the thread is called "easy tweaking your wizard" or something like that.
it will still disable your GPRS during a phone call, but this tweak will reconnect afterwards.
I have a strange problem with my O2 Trion: in the Connectvity bubble that pops up when when I tap on the little GPRS icon in the title bar, I get no connections listed and also no "connect" button - just a text liek "Go to network settings and add a new connection to access Internet" (rough translation from the German text).
The funny thing is that I do have network connections defined in the settings. After a hard-reset, I allowed the O2 programs in the Extended ROM to install themselves, so I have the original O2 connection settings. And PIE also connects without a problem.
So, would anybody know what makes a connection become listed in that bubble, and how to get the "connect" button back?
Thanks in advance!
Daniel
PS: I compared some values in the registry of my Trion with those of my old Magician. I found that Microsoft moved the ConnMgr from HKLM\SOFTWARE\Microsoft to HKLM\Comm and added a few keys, but I could not find a difference explaining the symptoms of my problem. Maybe someone of you would be so nice and export the ConnMgr part from their registry and send it to me, so that I can compare them? I do not think they contain any sensitive information (passwords etc), but it never hurts to look before you send anything.
Nice work-around!
Okay, it seems this is not just my device which has that problem, but rather a design decision by Microsoft.
However, I think I found a very nice work-around for the problem. I just added a short description to the Wiki, on the page http://wiki.xda-developers.com/index.php?pagename=Hermes_Utils under the heading "Easily connect/disconnect GPRS".
Cheers
Daniel
tadzio said:
Okay, it seems this is not just my device which has that problem, but rather a design decision by Microsoft.
However, I think I found a very nice work-around for the problem. I just added a short description to the Wiki, on the page http://wiki.xda-developers.com/index.php?pagename=Hermes_Utils under the heading "Easily connect/disconnect GPRS".
Cheers
Daniel
Click to expand...
Click to collapse
looks like you have already found a wrokaround for this but try this if you still want to see the connect/disconnect button and the time of connection in bubble. It also allows you to toggle between gprs always on and turn off gprs when the device is not used for the amount of time of your choice. very handy.
http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm
harryk1372 said:
... but try this if you still want to see the connect/disconnect button and the time of connection in bubble.
Click to expand...
Click to collapse
Thanks for the hint, but I had installed this little program already. It does a lot of nice things, but didn't help with the missing connect button.
In the meantime I heard from a few O2 Trion owners that they actually do have a "connect" button, so it's not a problem with WM5 per se. Although I have a work-around, I would still like to understand what really goes on there.
Cheers
Daniel
tadzio said:
Thanks for the hint, but I had installed this little program already. It does a lot of nice things, but didn't help with the missing connect button.
In the meantime I heard from a few O2 Trion owners that they actually do have a "connect" button, so it's not a problem with WM5 per se. Although I have a work-around, I would still like to understand what really goes on there.
Cheers
Daniel
Click to expand...
Click to collapse
hmmm... so you are right. i just confirmed it myself that it only enables the disconnect button but not the connect button when it's disconnected. i have gprs always on and did not realize it until now. it might be that i only saw the connect button when i was running an older version rom on my universal that did not come with gprs always on as the default. sorry for the confusion...
tadzio said:
Okay, it seems this is not just my device which has that problem, but rather a design decision by Microsoft.
Click to expand...
Click to collapse
Yes, it's a (in my opinion, rather questionable - in pre-WM5 OS'es, the ability to start (/stop) connections manually and, what is more, the ability of choosing between the Internet and Work right in the bubble was a great asset) design decision. It's only the "Disconnect" button that's hackable.
If I press wlan button in Comm Manager than WiFi should be ON but it is not. I did use some different roms but still nothing. Somebody know what to do ?
settings-connections-wireless lan - there is only message:
Wireless LAN is OFF.Turn on Wireless LAN.
It does not work. Please help me.
Go back to wm5. If your lucky it might come back. The more I dig through here the more I see people with wifi problems after flashing. You might be out of luck
HOWEVER
I noticed under WM6 the bubble that pops up when you click on the wifi tower ALWAYS says 'turn on wifi'
Good luck!
Same problem with my WI-FI, Not working please help!!!!
Hi All. I am facing the same problem with my WI-FI as Vomithaus is having. Whenever I try to to connect to WIFI from Commmanager, it tries to and then to show disconnected. When i go to settings> Wireless LAN, it asks me to "Configure Network Adaptors", and lists all the adaptors and going into them asks about the ip settings and stuff like that. By the Way I Bricked my phone once and then i flashed with T-Mobile Ship WM6.0 RUU for the WING. And I strongly suspect that the registry setting are not right or the Radio ROM is F***ed up. Can any knowledgeable person help me please? I would greatly appreciated any help.
Same problem with my WI-FI, Not working please help!!!!
This is the addeneum to the last post. The last remaining screenshot for the above post. The last screen shot of the "Wi-Fi Status" in the "Settings > Connection", gives me an option to "Turn on Wi-Fi" but toggeling it results in nothing. Thank You everybody for your time and consideration.
It might help us to figure out how this happened too. I bought the EXEC off of ebay and it was like this from the get go. The previous owner flashed it to wm6 about 1 month ago, but said it was working fine... all he did was hard reset to get rid of the personal information. I want to believe him, but there are a few people on here complaining of flashing the exec and losing wifi. (even the official rom from O2).
Flashing COULD have damaged the transmitter, but it seems more likely that a setting is wrong somewhere (especially since there is a slider bar for WIFI battery vs performance).
This is good news (somewhat), but the bad news is that if there is one, no one knows about it. I have messed around in the registry (there were some promising entries related to POWER), but nothing that even showed a response. I found the entry that connects to the slider bar, but PERFORMANCE = zero, so there is nowhere to go there but WORSE.
This really sucks, is all I can say. I blew $500 on something that is useless (well... not useless, but no WIFI? WHY COULD IT HAVE NOT BEEN BLUETOOTH!)
Another step I have taken is contacting PPC Tech's via email and asking them if they have any idea how to repair it, and how much $$$
I'll keep you informed.
Can you tell me if yours EVER worked, and if so, when it stopped?
I just looked closer at your screenshots.... Do you have a WIFI card? (it say's 'adapter').
No, I dont have a WIFI card but this is way how windows handles all is peripherals (services), as an add-on card. just like you laptop.
Guys, There is a registry fix for this problem.
Please take look here :
http://forum.xda-developers.com/showpost.php?p=1475527&postcount=14
Ron
I am afraid Ron that this is not a case as suggested in Beowulf6's solution. If it is the solution I dont know how to exactly implement it. But I am posting here the exact registry key screenshot for you guys to take a look also. I can't see and TNETWLN1 or TNET12345 key here in my device. I still think it has to something with the registry. Can any one here with a T-Mobile WING verify and post their screen shot? or maybe send me a registry backup to compare with? It would be really grateful it some does that. Thanks everybody for a few seconds to read this.
In my herald i can't see TNETWLN1 or TNETWLN12345 too.
I did use Mobile Registry Editor for that , what you guys are useing?
(sorry for my English, if you dont understand me just tell me please)
Look at the screenshots, there a Reg Folder with the name WLAN, open it, and then open the key with all the numbers and letters. At the end of that line is a code. TNETWLAN1 is what it should be for the Herald.
f_v_man said:
I am afraid Ron that this is not a case as suggested in Beowulf6's solution. If it is the solution I dont know how to exactly implement it. But I am posting here the exact registry key screenshot for you guys to take a look also. I can't see and TNETWLN1 or TNET12345 key here in my device. I still think it has to something with the registry. Can any one here with a T-Mobile WING verify and post their screen shot? or maybe send me a registry backup to compare with? It would be really grateful it some does that. Thanks everybody for a few seconds to read this.
Click to expand...
Click to collapse
It is like Bio88 says.
You are already on the right track... click on WLAN and you will find the key.
Change the value of the key into TNETWLAN1
Done
bio88 said:
Look at the screenshots, there a Reg Folder with the name WLAN, open it, and then open the key with all the numbers and letters. At the end of that line is a code. TNETWLAN1 is what it should be for the Herald.
Click to expand...
Click to collapse
Hi Please look at my screen shot again clearly. I did post what is inside the WLAN folder. There are only two keys :
1) (Default) \Windows\ctlpnl.exe
2) CmdLine cplmain17
I still can't figure where is the key with numbers and letters. Sorry If I am a bit dumb or wrong. Thanks.
it is possible if you use the default Commanager that you dont have this registry key.
I dont know if it helps if you create it on your own.
but for me where i installed a different commanager, the Key was there and i edited it for the wlan button.
My Tmo Wing has "TIACXWLN1" in that registry key.
Do those changes apply to the herald and the Wing interchangeably?
Hi all,
i'm looking for a solution for the following problem:
Everytime my Diamond connects to another bluetooth device i want to set the volume to 100%.
Is there a solution anywhere in this forum? The search funktion has no results for me
Many thanks and sorry for my bad english
Lars
Me too. I've been thinking about writing a MortScript, but haven't got a clue where to begin...
Take a look at G-Profile at www.ageye.de and forum.ageye.de
It makes Equippement-based profiles possible
Bax
Yeah that's it! So many thanks... thats what i'm looking for
Hello everyone!
Since always I found that on my X1i (generic_uk 3AA) the Ring and Vibrate changes back to just 'ring' after a restart.
Is there any way to make this Ring and Vibrate "permanent" even after a restart? I looked into the Registry but did not find a proper value to mess around with ....
I had now 6 or 7 of those X1s and this last one is 09W23(!) and still does that.
Help is appreciated
What is this... nobody has the same problem and/or nobody knows a registry 'trick' or other means to solve that either?
michaelthemage said:
What is this... nobody has the same problem and/or nobody knows a registry 'trick' or other means to solve that either?
Click to expand...
Click to collapse
(having that many phones wouldnt matter it would be a software bug if anything)
Just checked mine - after a restart it is still set to vibrate and ring
BUT i am running Vodafone UK - i actually prefered it to generic but since i am using a different rom i cant say properly although they are very similar - see what someone with the same firmware says.
Dont know how to fix though sorry
Hey, thanks for answering. I have voice command installed and a photo contact program that includes ring selections. Even though I don't use those, one never knows if these interfere somwhow.
But there should be some here who know a registry setting and/or have the same problem and solved it somehow.
In any case.... waiting for now....
michaelthemage said:
Hey, thanks for answering. I have voice command installed and a photo contact program that includes ring selections. Even though I don't use those, one never knows if these interfere somewhow.
Click to expand...
Click to collapse
I bet they do interfer.