Tomtom looses BTGPS everytime - JAMin, XDA Neo, S200 General

Hi all,
Everytime I use Tomtom V6 on my Orange M600 I have to delelte and re-pair my BTGPS unit. If I don't then the Tomtom software cannot seem to see it. Is anyone else having this problem? If so, has anyone found a solution?

Well, i also have this Problem. I also use TomTom 6 with a BT GPS unit, and after every softreset or longer disconnect i have to re-pair the device and enter the code. If i don't TomTom will not see the device any more. I haven't seen any thread with a solution yet.
On my XDA Mini with WM2003SE i never had this problem, so i guess it is a WM5 thing.
Is anybody here who can help me. I have the german Rom 2.15.4.29 GER. Radio Rom is 02.19.21.
Maybe there is a way to fix it in the registry... nothing else is installed yet.
Thanks in advance ... Marc

Ok, can be closed.
The solution is:
uncheck the security mark when installing the com port

Cool, thanks matey. Works a treat

Related

Qtek2020 Oziexplorer problem

Hi all,
i have a problem with OziexplorerCE and Qtek2020 for connect py BT48 bluetooth gps. With TomTom it's ok, but all other (ozi, gpsce, ....) i can't find the gps.
Can you help me.
Thanks
Eric
This is a know issue with Oziexplorerce (see their website).
Pocket Blutetooth Tools is supposed to fix this.
Thing is that everything else now works with bluetooth with my 1.72 rom and I dont really want the Pocket Bluetooth Tools on my device anymore . . . .
Maybe there are other solutions???
I have the same problem
TomTom it's ok, but Ozi can't find the gps.
Is OK with others GPS software like GPSDash and Vito Navigator.
I'm afraid to install Pocket Bluetooth Tools because most users have found this very satisfactory and some have suffered problems such as the re-introduction of bonding problems, decreased device stability, and the necessity to hard reset to remove it.
Thanks

TomTom 3 & calls

Hi I have an O2 XDA2i. while navigating with tomtom, if a call comes in and I answer it I cannot hear anyone, not sure if they can hear me either. I am using a Bluetooth GPS. Does anybody have a fix for this? or am I alone in this problem ? Also, even if I close tomtom down I cannot get hear anything while making a call...only option is to reset the phone.
...grrrrr.......
on a side note..... Does anyone have an XDA2i that has a blutooth car kit that works without echos?
Cheers,
Gary.
Installing the Tom Tom GPS 3.07 update reslved a lot of the problems I have using Tom Tom BT and a BT headset.
Install it after everything else and remove SD card before install.
still locks up every now and again but its about as good as I can get it to work.
Tom Tom don;t seem to give a damn about this problem.
There's nothing like a satisfied customer and I'm nothing like a satisfied customer
@princegary
please check this link:
http://www.tomtom.com/support/right...n/uk.cfg/php/enduser/std_adp.php?p_faqid=1719
as tomtom declares:
...Therefore this update can also be used if you have:
an HP63xx Pocket PC (+ Bluetooth GPS)
MDA2/XDA2/QTEK2020
so it is not really for xda2i, but you'll see... (I don't see a reason for not working with it)
@ Fritz
Fritz said:
Installing the Tom Tom GPS 3.07 update reslved a lot of the problems I have using Tom Tom BT and a BT headset.
Click to expand...
Click to collapse
I do not know, that you only mistyped or really used TomTom GPS 3.07 INSTEAD OF TomTom Navigator 3.07, but if so - give it another try...
Maybe it helps to be satisfied! 8)
I tried the full 3.07 update and same problem still existsed.
I've now installed the 5.0 upgrade and this does seem to have resolved the problem.
All is not perfect as Tom Tom has stopped running twice for no apparent reason but all I need do is restart the application. I think it might be more to do with it loosing the GPS BT signal rather than a problem with the software compatibility. Only two days in so I'll let you all know how I get on through the week.
the only problem I had with tt3.07 on my xdaII, that sometimes it loaded so slowly, I started it more than once - after a soft reset, the problem's gone
but never stopped during/because of a call (neither destinator 3.075 did so far)
so, maybe just your device...
I upgraded to wm2005g and tt5 and having no problem at all (so far :wink: )
As I mentioned TTN5 seems much better, much more stable.
Would love to upgrade to WM2005 but as I understand it it doesn't work on the XDA2i only the XDA2 and the XDA2s.
HI there,
Does TOMTOM 5 work fine on XDA IIi? I have just read another forum here, that TOMTOM 5 is not compatible with the XDA IIi
I am about to upgrade and get the XDA IIi, i would appreciate if you could let me know.
thanks
nya
I upgraded across the weekend and so far Tom Tom Nav 5 has worked pretty well on the XDA2i.
As mentioned it has given up on me twice but I don't think this is due to incompatibility
thanks for the quick reply, just one more question please what GPS receiver are you using?
thanks in advance
Regards
nya
It's unbadged, bought it off of e-bay, please see link below
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=5771460756&rd=1&sspagename=STRK:MEWN:IT&rd=1
I installed TomTom 5 and the problem is solved! Call came in and I thought Damn... but I picked up the call and it was fine TomTom even resumed after the call which I was amazed at.
My only problem now is that I got a new 1gb card and tomtom hates it, or atleast my XDA2i does. Would it be better for me to just buy a 512mb for my sat nav apps? or is there a recommended brand of 1/2gb card that works happily on the XDA2i and TOMTOM 5?

TOMTOM3 & XDA2i

Hi,
Has anyone managed to get this to work on the XDA2i or am I climbing up the wrong tree? :roll:
anyone?? :roll: :roll: :roll: :roll:
I installed it with a fortuna bluetooth gps and it works!
Anyway i had some problems with Plantronics headphone, i
made some tests and i suspected that Tomtom driver interact
with Plantronics, so i unistalled it! :roll:
Also i think that 2020i doesn't support 2 wire serial comunication, so
if you have a serial gps should not works! :?
Ciao
There should be no problems - I've been using it since the XDA2i was released, you need to ensure that you apply all of the updates etc. Let me know if you have any specific problems.
I can vouch that it works... Although you may need to reinstall bt-stack as tomtom overwrites it with old dll's...
Thanks everyone. I will try it.

Jasjar with TomTom 6 and Holox 321 BT GPS

Hi All
I have the above setup and am having a nightmare trying to get the bluetooth GPS to work. I have tried every setting I can find and even upgraded the ROM to 1.90.96 to see if that helped but still no joy. Basically whichever COM port I assign 0,4,5 or 8 (the only options allowed) it shows up in the "Other Bluetooth GPS receiver" catergory in TT6 but it will not connect. I have also noticed that the only time the BT LED on the Holox device flashes is during the initial pairing with the jasjar, before the device default password "0000" is added. Once this function has been completed tthe light remains solid and tt6 does not recieve the gps signal.
I know the Holox unit and the TT6 is working fine as I have tried it on an old HP 1940 with wm2003 and it works perfectly.
Has anyone got any ideas, suggestions or experienced the same problems
When you set up the Pairing with the GPS receiver use COM0 and select the serial port. Once this is done, set up a new outgoing COM port and make sure that the "Enable secure connection" box IS NOT checked. My Exec never works with any BT GPS receivers if this box is checked.
Then in Tomtom set use other BT GPS receiver and select COM0.
Pug.
Hi Pug
No joy I'm afraid. Have tried this more times than i care to mention but TT^ will not recognise the gps device.
Sounds like a problem with your BT stack then. If it worked on your other device then it's obviously a problem with the Uni. Seen as this isn't a common problem, might be some problem with your setup. Thinking about it now, Tomtom overwrites some BT files during install, as you seem to be using an AKU3.2 ROM which will have updated BT stack, try deleting these from the windows folder.
ttn6bt2003.dll
BtCoreIf.dll
BtSdkCE30.dll
If it doesn't work, you can always re-install TT6
Big G said:
Hi All
I have the above setup and am having a nightmare trying to get the bluetooth GPS to work. I have tried every setting I can find and even upgraded the ROM to 1.90.96 to see if that helped but still no joy. Basically whichever COM port I assign 0,4,5 or 8 (the only options allowed) it shows up in the "Other Bluetooth GPS receiver" catergory in TT6 but it will not connect. I have also noticed that the only time the BT LED on the Holox device flashes is during the initial pairing with the jasjar, before the device default password "0000" is added. Once this function has been completed tthe light remains solid and tt6 does not recieve the gps signal.
I know the Holox unit and the TT6 is working fine as I have tried it on an old HP 1940 with wm2003 and it works perfectly.
Has anyone got any ideas, suggestions or experienced the same problems
Click to expand...
Click to collapse
Try reading here:http://forum.xda-developers.com/showthread.php?t=283253
That should sort it.
Mav
Still No joy with Jasjar, Holox BT-321 GPS & Tomtom 6
Hi All
I've tried all fixes for the above problem suggested by pug and mavrik64 earlier on this thread but without success. This is a little frustrating to say the least. The Jasjar has had clean install with nothing loaded other than the default programs included with the latest ROM build 1.90.96 from Jwrightmcps, the UK 'O2' setup and TomTom 6. As I know the software and Holox unit work fine on my old HP1940 running on wm2003, I'm convinced it is something in WM5 that is giving me the problem. I have read other forums were other people appear to have similar problems.
Please note; the main reason I flashed the ROM from that previously installed 1.30.76 was to try and find a fix for this problem. The older version gave me exactly the same problem.
Anyone got any ideas
I am using Ivans Beta 15 and no problems, try flashing with that.
You have a new PM in a few moments as well.
PUG
Any idea where I can get hold of a copy of Ian's Beta 15 ROM. I've trawled round this site but can't seem to locate it
Big G said:
Hi All
I've tried all fixes for the above problem suggested by pug and mavrik64 earlier on this thread but without success. This is a little frustrating to say the least. The Jasjar has had clean install with nothing loaded other than the default programs included with the latest ROM build 1.90.96 from Jwrightmcps, the UK 'O2' setup and TomTom 6. As I know the software and Holox unit work fine on my old HP1940 running on wm2003, I'm convinced it is something in WM5 that is giving me the problem. I have read other forums were other people appear to have similar problems.
Please note; the main reason I flashed the ROM from that previously installed 1.30.76 was to try and find a fix for this problem. The older version gave me exactly the same problem.
Anyone got any ideas
Click to expand...
Click to collapse
Sorry to hear this didn't work. I am using JCs current rom with TT6 and Holux GPSlim 236 and it works like a charm.
Good luck
Mav

Hermes & Bluetooth GPS parring problem

Hello, I've got problem with my bluetooth gps (nemerix).
When I'd like to connect to my pda first I'm looking for new devices in bluetooth manager, then parring and seeting outgoing port. And then I'm starting my Navi aplication. It works.
But, when I'm shutting down gps device, turning off buetooth in pda and start it again I've to all tasks mention above - searching, parring and so on. In my opinion,when it's added to my bluetooth devices and properly parred once it should work every time I'd like to use it, however gps device doesn't communicate with pda.
It's quite annoying, why I cannot just start my gps device and my navi aplication and run - I spend a minute with setting connection.
Do anybody know how to fix my problem?
Are you using a custom rom? If so it could be a problem with the rom you are using. I've had the same problem in the past and a different rom fixed the problem.
I've got now Schaps_WM6Pro_Hermes_4.31_WWE_Full, which rom are you using -RanDomIze Final Storm v2.10?
Have you tried "Pocket Buetooth Tools"? You can find it here: http://bluetooth.i-networx.de/download_e.html
I hade major problem pairing my BT-gps to use with Tomtom before I found BTTools.....
I'll try, thanks for advice
Kladden said:
Have you tried "Pocket Buetooth Tools"? You can find it here: http://bluetooth.i-networx.de/download_e.html
I hade major problem pairing my BT-gps to use with Tomtom before I found BTTools.....
Click to expand...
Click to collapse
great tool thanks

Categories

Resources