Hey,
I have a problem with my vario, i can´t start bluetooth. The Vario tried to start bluetooth, but after a few seconds it falls back to commmanager and the bluetooth icon is signed with x.
I tested everything to start bluetooth, but no chance.
I´ve updated the vario to the latest upgrade from t-mobile.
Has anybody an idea to help me???
Related
My sony ericsson HBH 660 does not work with my New qtek 9100. Has anyone had any luck with anouther unit? And if so how does the voice dialing work with the headset??
Thanks
Hi, I have same Headset (SE HBH-660) with an LCD and it works great with QTek 9100. Which kind of problems do you have?
I glad to meet anouther Qtek 9100 user! It just will not seem to identify it?? My Hp just picked it right up! Am I missing something? I go to add a new divice and it looks for the headset but never finds it? Did you have to do any tricks?
Thanks, Adam
i have problem pairing my BT head set too
problem was fixed after i upgraded the rom with this: RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
hope this helps
Same with my bluetrek G2, but i did readin the
manual that I have to push the button 7 seconds
longer after it starts up, and then my led flashes
from red to blue and it can be discovered. Didn't
have to do this on my Jam. WM5 I presume...
Hope this helped, try to check the manual.
Might be the solution, I came accros it somewhere
by accident. But it works...
Axel
got the k-jam and motorola ht 820 h/s and paired no problems
Its been a week since I have upgraded to new ROM and my kjam has stopped creating the connection between my jabra 250 and the unit. It shows a partnership in the connections, but does not activate when I turn on bluetooth and the headset. This is the second time. (I have upgraded the ROM two times and both times a week into it, my bluetooth headset has stopped working).
Any suggestions?
thanks,
mike
It just happened to me this morning... my Jabra 250 is not recognized and it turns out that my BT hardware is having problems. It took forever to restart the device. Now I'm trying to run the ROM update again. I'm using the latest AKU2 ROM (2.17.7.2) from Qtek on unlocked CID Qtek 9100 device.
Seems like I have a dead bluetooth hardware on my hand... anybody knows where I could get this thing fixed locally at Los Angeles, California area? Thanks.
Also had problems with my BT Platronics M2500 hands free when i first updated my kjam. My Kjam recognized the hands free device and it worked great until I turned off the BT hands free device. When I turned it bvack on again my Kjam didn’t seem to be able to find the BT device, so I had to delete the pairing between Kjam and BT device and do the pairing operation again. I then tried a Nokia BT hands free to see if it was a problem with my Kjam, did the pairing and after that my BT Platronics M2500 hands free began working perfectly. I don’t know why but it did, maybe an AKU2 bug?
So my advice is to do a pairing with another hands free BT device and see what happens before you go buying other BT device.
although the blue light flashes away merrily, i just cannot see nor can i connect to any other devices.just keep getting ' no devices found '
Same problem too
My bluetooth has stopped function as well. T-mobile MDA Vario (USA) here. upgraded to 2.26 ROM a while ago everything has been fine until last week where i could not use my bluetooth headset. now it will not discover ANYTHING or pair with anything. Soft-reset and hard-reset doesn't help! what happened???
-DC :shock:
no idea mate, you got just the same prob as i have.
i flashed my wizard to wm6.1 a couple of hours ago and now my bluetooth won't work!! can anyone help???
I've just got a Orange SPV M3100 and paired it with my BMW OEM bluetooth carkit, all goes fine and paired no problems.
It manages to connect to the phone and display contact details on the radio display and make calls.
But leaving it a couple of hours and coming back, the phone will not reconnect back to the car. I've tried resetting the phone without success.
The only way to get the connection back is to re-pair the devices.
I had a Imate Jamin before and it worked without a problem, connects every time.
Is anyone else experiencing problems with their carkits?
Do you think the problem is specific to the Orange ROM, would flashing it to a Imate or TyTN ROM help or resolve the problem?
Any advice would be greatly appricated.
Hi, I got a problem similar like yours...
I´m from Spain and I have an ´06 Opel Astra(Vauxhall in UK) with the BT handsfree carkit from factory.
If I make a hard reset to my Vodafone S200 (Orange SPV M600) and leave the machine with the factory settings it works fine with the carkit, but it recognice the carkit like a headset handsfree. But if i restore a back up with the TomTom 6 installed... wow, then start the problems... the handsfree conect with the S200 but after a few seconds the connection is over...
I don´t know if have you got some kind of navigation system, but in my case the problems starts when I install the TomTom... I´m sure it changes some drivers of the BT and this makes the don´t works propertly.
I don´t know what to do...
PArrot Car Kit
I have the same problem with Parrot Car Kit and I have the latest TYTYN ROM
2006 BMW 3-Series Bluetooth
My car doesn't have bluetooth, but I had a loaner car while my car was under the knife. The loaner car was a 2006 3-series w/ Bluetooth. The first pair was perfect, but after a few hours.. What a POS.
I have the latest ROM on my phone, and that didn't make a difference.
No issues on my 5 series, but I have one of the first ULF modules in mine.
From reading TyTN Bluetooth issues around the net and on this forum, it seems to be an issue with the TyTN having some kind of power save mode which turns the bluetooth off after some time.
Kinda stupid, anyone know some registry crack to turn any power saving off?
I have a Parrot CK3100 in a BMW and a brand new SPV M3100. All was working well with my M600 but as soon as I swapped the phone for the M3100 last week I've had problems as described by the OP. Bluetooth keeps switching itself off on the SPV. It works well enough to start with and then suddenly it disconnects. Re-pairing works and it's worth going to bluetooth settings and turning it back on again before you try re-pairing.
Surely there must be an easy fix for this problem - I'm just really pleased I'm not the only one with this fault.
............
Your all quite lucky it works at all..mine doesn't do anything
My Ford Fiesta has been waiting for an 'software upgrade' since October !!
Promised it would be available before Xmas but nothing happened.
lifterus said:
Try and replicate the problem with a different phone if possible. One that BMW supports. If can replicate it, then they'll update the firmware on the BT unit in the car. This happened to me. But I had to prove my case using my girlfriend's RAZR before they'd listen and stop blaming my phone as the cause.
Click to expand...
Click to collapse
I dont think it is a problem with the BMW carkit as it worked fine with my SPV M600 (Prophet)
Hello all, I have upgraded to Sharps 4.0 but the bluetooth in teh car still does not work. Carkit finds the phone and calls to connect, however there is no answer from the phone to give the code.
Can any body help. This did not work with original WM5 from T-Mobile and still does not work wit WM6
Thanks in advance for the answer to solve this problem
I have a similar problem with my TyTN and Pioneer DEH-P75BT, and i found this post...
http://forum.xda-developers.com/showthread.php?t=290871&highlight=P75BT
With this changes in registry, my TyTN connect with headunit tottaly correct.