I have a M600 SPL 2.10.0001 (G4) and installed the newest 02.47.11 Radio rom, just the radio rom. Now when I try to activate Bluetooth I get the following error: "Problem with bleutooth hardware". I downgraded to different other radio roms but all with the same problem. Unfortunately I do not have a good backup of my original Dutch Orange Radio rom, I made the backup with aWizard 1.3 beta 2 but the radio backup was only 740Kb. I have a few questions.
1. Is there anyone with a dutch Orange M600 backup?
2. How dow I make a backup, because aWizard fails (Or is the OS part Ok?)
Thank you!
Related
Is it possible to backup a current radio stack, install a test one that is a later version, and then re-install the original stack?
I have upgraded to WM2003SE ROM, and upgraded Radio ROM to A20.10. My device is PH10A. But when I insert a sim card, these always no GSM, I could not dial any phone call.
Could anyone tell me that I should flash which Radio ROM to my device? Thanks
problem connecting to any network after radio upgrade
Hi,
I am having the same problem connecting to any cell network on my phone. It is a Qtek 1020 PW10A1 Rom version 4.02.04 ENG.
The problem started after updating the Radio stack software. The signal icon always shows up as no signal, this happens on all networks. I have another 1020 with the same Rom version but a different radio version A33.02 that is working. I have tried to search for this version to download or a solution for this problem for a few days now with no luck and was wondering if any one could help?
I have come across many other radio versions that say they are compatible with this model but each produce the same result, no signal.
Thanks in advance
(PS this is my first post!)
Hi Shadow,
I also have a 1020 with RSU 33.02 installed. If I knew how to extract the RSU then I could upload it here. It could do with being on the FTP. I didn't find anything on the Wiki about it, wondering if anyone has any suggestions?
Regards,
Neil.
I’m new to this so this may be wrong but I have found out that if I go into the wallaby boot loader and push the contacts button I get these options:
CE ROM TO SD
BOOT TO SD
GSM ROM TO SD
CE+GSM TO SD
Is the “GSM ROM TO SD” option the one that’s needed to be able to get the RSU extracted or is this something completely different?
When I select it, it tells me to connect the rs232 and run pc monitor – two things I don’t have.
Shadow1
Anyone found RSU 33.02 rom yet? or have any sugestions on how i could fix my phone :?:
Thanks
Hi everyone !
I'm new here (in the Hermes forums). I have a prophet, but now I bought a Hermes.
The guy who originally owned (the phone is used) told me that when he flashed it, he had this problem that I'm going to tell you now, so I really don't know what could had happened to him during the flashing process.
The problem I have is that the Hermes works very well, the Wifi, bluetooth, card reader, everything EXCEPT the PHONE, let's say, the GSM interface.
When I turn it on, everything works well, (I DON'T SEE THE 'NO GSM' THING), and I have the antenna icon with the exclamation mark (!) next to it. When I go into there, in the phone configuration, if I try to select a network manually, after a few seconds it says that it can't retrieve the list of networks, that I have to try later. If I go to the band configuration, and I put it to use only gsm, for example, after a few seconds it says that it can't change the configuration, that I have to try later.
I tryed with different sims, of different companies.
When I bought the phone, it had a spanish Schap's 3.54b, and the Olipro 2.30 spl.
I tryed hard resetting, but nothing. I flashed the original shipped rom WM6.1 WWE, downloaded from here, and nothing. NOTE: I had to flash with the sd method because if I try to do it with the computer, I have the 260 error (or 262 i dont remember).
I changed the HARDSPL to theOlipro 2.10, hard reseted again, and still de same thing.
The IPL is 1.04.
NOTE: When I flashed the WWE rom, I flashed the .nbf file inside, but the SPL.nbf I didn't flashed.
What can I do? ANY SUGGESTIONS ?
I read a lot of things in the forums and in the wiki, but nothing. I've just finished downloading the Schaps WM6 4.31, now i will try to flash it with the sd thing.
Also, I have the protocol 32.80.7020.20H. I've read it somewhere but I don't remember what the protocol is. I HAVEN'T CHANGED THIS since I bought it, could that be my problem?
Currently, I have this (before flashing Schaps):
-Device Information:
ROM: 3.54.255.3
ROM DATE: 07/05/07
Radio Version: 1.47.00.10
Protocol: 32.80.7020.20H
ExtROM: 3.54.255.104
-In the bootloader:
IPL-1.04
SPL-2.10.Olipro
Maybe the antenna is no good...
1st thing I'd try though is to flash a new radio on (use sd card method). Worst that can happen is "No GSM" but as you can't use it anyway theres no harm in trying...
Check what radio rom you have 1st though so you can flash back if need be.
If you can get a "broken" Hermes (same model is best) then you can replace parts and see if that helps. I did this and found one of the parts that was causing a problem with my jasjam was the flywheel.
Do a search for the HTC service manual or go to Mike Channons web site to get heaps of manuals and tutorials...
Cheers...
The phone is near new, let's say, it was used for less than a month, he had it a week or two and then flashed it and had that problem, so I don't think that it's and antenna problem, and if it hadn't antenna, it has some signal of some kind.
Any other ideas?
I changed the radio when i Flashed the WWE version. I'm now downloading this one http://forum.xda-developers.com/showthread.php?t=298520
Any suggestions? is there any problem using the AKU 3 or something?
Thanks =)
Hey,
What about the protocol version? can I change it? how? cause I flashed it and the radio changed but the protocol is the same.
I'll try to flash it with windows vista, to see if I can, because XP won't let my.. olnly SD flashing
Ok, I Installed a cingular flash, now I've protocol 32.67.7020.10H. Radio:1.34.00.10 and still having the same problem. I don't know what to do now... any suggestions? !
thanks
PD: also tryed putting a little piece of paper over the sim but it didn't changed anything
PD2: The error I get when I go to Phone Settings -> Netowrk, and I choose "Manual" is: "Unable to read setting from the netowrk. Try viewing settings later, or disconnect data connection and try again.
Hello, i bought a new phone with a problem(the seller told me that speaker dont work, well this is not a problem i can use the external speaker), this is almost new, i discover that i cant init wifi and bluetooth.
I test installing 2 roms, WM6.1 official HTC and WM Amina (i think is the name). but i cant recover this functions.
When im on comms manager click on wifi or bluetooth and appears like thinking and few secs later its off.
I notify that when i reset my phone and open comms manager bluetooth is enabled but i think is not working only enable.
Anyone can help me to fix it?
im very worried about
Thanks,
Albert
Radio Version?
What Radio version are you using?
Rom: m-amine
Radio: 1.59.42.15
try flashing RADIO rom 1.59.42.23 and make a hardrest after each ROM flashing.
whats change when i install a new radio?
and how i can install only the radio?
I generally install the rom with radio inside, how to install only the radio?
Ok i install the radio .23 but nothing bt and wifi doenst work
changing Touch Cruise motherboard
Bonjour,
unfortunately I had the same problem and others like camera weird colors pictures etc.
And after radio roms testing hard reset and so and so, I had to give my telephone to the repair service (under garantee), they changed the motherboard and now it's OK.
I'am affraid your phone has the same problem if the radio rom flashing does not resolve your problem.
cyklix
I have Qtek 2020 with Rom CE Version 1.72WWE, but every time i try to upgrade to new roms:
(Previously Sundream's WM 6.5 WWE) and (Currently Syed Ather's WM 6.0)
Its giving me issues related to my network.
Signals are fluctuating, i cant make calls, neither recieve them, get messages in delay time more often, It avoids making me save contacts in sim card but after several attempts it succeeds.
Please Help me out. I am not getting this issue when i downgrade back to my Official Qtek 2020 1.72 Rom.
That is strange. Can you tell me, when you take your battery out, what is displayed on the sticker underneath? PH10a? PH10b?
Also, do you happen to know what Radio you are using? (The radio is seperate to the ROM).
Furthermore, and only if you remember, when you put your device into upgrade mode just before you flash a new ROM, what boot number does it say (IE Mine says V1.04 from memory).
Thanks for Reply
Jadel said:
That is strange. Can you tell me, when you take your battery out, what is displayed on the sticker underneath? PH10a? PH10b?
Also, do you happen to know what Radio you are using? (The radio is seperate to the ROM).
Furthermore, and only if you remember, when you put your device into upgrade mode just before you flash a new ROM, what boot number does it say (IE Mine says V1.04 from memory).
Click to expand...
Click to collapse
Yeah let me tell you all the necessary Information
Official Qtek 2020 Rom Version: 1.72.00
Official Qtek 2020 Radio Version: 1.14.00
Upgraded to:
Syed Ather's WM 6.0 Profession (Currently)
Radio Version: 1.17.00
-------------------------------------
It is : PH10B
Bootloader Version : V1.04
My Network Details
Network Name: Ufone
Network Country: Pakistan (ASIA)
Details of How I Flashed My Roms
I went to Boot Loader First: (DPad+Power+Reset) (V1.04)
Attached it to my Laptop through its Cradle (Windows XP Used)
Serial changed to USB
Loaded HimaupgradeUT_NoID.exe file (dont remember exact Name)
and Upgrade the roms + Radio Later
Got Congratulation Screens
Hard Reset By (Camera+Record Button+Reset)
Using the NO,YES,YES things and Pressing DPAD
Important Thing to tell you
1-I didnt take out my Storage Card not even SIM Card of My Network Provider when Flashing both times the different roms.
Please Any one here to help me out