Related
the WIFI state is connected. but when I try to open a webpage, eg,www.google.com, it shows error: the page cannot be found. Check the name and try again. anyone knows that? how can I fix it?
Thanks.
HELP ME
Someone can help me?!
Where are you using the wifi? Is it your home network or work/hotspot?
Go to settings then the connections tab then tap the "wireless lan" icon. Tell us what you see on that screen, then click the advanced tab and tell us what is there too. Finally click "menu" then "network cards" and tell us what is there (should be a list of available networks).
The only problem I have with my wireless is that i need to have a very strong signal to be able to receive my IP address via DHCP. Once it has it then it's OK and i can wander about but I get no address when the signal is weak ( less than 50%).
Cheers
Gadget.
tatata
Check that you have set the connection type to "internet" - I suspect this problem occurs because you have it set to "work".
Chris
I am having the same problem , my signal is nearly 100%, the phone is set to internet, Belkin 54g,, authentication is 'open', WEP, the key was entered manually (26 digits ), do i use 802.1 access ?
mode is infrastructure, tx rate is auto, channel 11,, the mac and ip address is correct,, what is enroll ?
I have tried everything and it is obviously connected so why will it not load pages ?
Had the same problem myself with my XDA IIs. Only solution I could find was to turn disable the firewall on my router. No idea why that worked, and cant find a way to turn the firewall on without causing the problem again, but it did work!
got smilar problem here, some times even when i connected and browsed web say 2 mins. ago suddenly connection can not be established i have tried it with belkin 54g linksys and 3com routers all same couldnt find any solution and accepted it as it is
gadget_uk said:
Where are you using the wifi? Is it your home network or work/hotspot?
Go to settings then the connections tab then tap the "wireless lan" icon. Tell us what you see on that screen, then click the advanced tab and tell us what is there too. Finally click "menu" then "network cards" and tell us what is there (should be a list of available networks).
The only problem I have with my wireless is that i need to have a very strong signal to be able to receive my IP address via DHCP. Once it has it then it's OK and i can wander about but I get no address when the signal is weak ( less than 50%).
Cheers
Gadget.
Click to expand...
Click to collapse
hello All and Gadget
Bought the XDA mini S from 02 yesterday and havent really been playing with it except installing programs, removing the 02 files and finding my way round the phone.
Anyway, having problem with getting WIFI, can anyone help?
At home, I use Wanadoo broadbrand wireless 'livebox' and here are the following details on the Mini S:
Wireless Lan> main tab> SSID - blank, mode - infrastruture, BSSID -blank, Tx rate - auto, channel - 0
Advanced tab > status, not connected to network, MAC - 00-09-2D-8D-66-BF, IP - 0.0.0.0
network cards tab> wireless tab - wanadoo - 2D9E available
network adaptors> network card connects to 'The internet'
Thanks in advance
Andy
Might be a stupid question but.....
Have you got any security on your wireless router? if so have you permitted the MAC code of your device to connect and obtain an IP address from your router?
Anthony.
an2ony said:
Might be a stupid question but.....
Have you got any security on your wireless router? if so have you permitted the MAC code of your device to connect and obtain an IP address from your router?
Anthony.
Click to expand...
Click to collapse
Thanks for the prompt reply. Another stupid question is how do I find out if I have security on my wireless router and if i have security, how can i permit the mac code to do its stuff.
Thanks again.
Andy
Check out:
http://help.wanadoo.co.uk/resultDis...Configuration+Manager&resultType=5002#Goto155
Have you set up a WEP security key to prevent unauthorised access to your ADSL Connection? if not then you should; I think the 'LiveBox' has a default key which you have to enter to connect and obtain an IP address.
Not being familiar with this router, I cannot tell you exactly but I would expect you to have to permit a new MAC code under the 'associated devices' menu.
Sorry for being Vague.
Hope this helps. :roll:
an2ony said:
Check out:
http://help.wanadoo.co.uk/resultDis...Configuration+Manager&resultType=5002#Goto155
Have you set up a WEP security key to prevent unauthorised access to your ADSL Connection? if not then you should; I think the 'LiveBox' has a default key which you have to enter to connect and obtain an IP address.
Not being familiar with this router, I cannot tell you exactly but I would expect you to have to permit a new MAC code under the 'associated devices' menu.
Sorry for being Vague.
Hope this helps. :roll:
Click to expand...
Click to collapse
Anthony
First of all, thanks for the link. I am able to see all the details (technical) of my livebox on the wanadoo configuration page.
There is a WEP key set and having tried to enter as much info on the relevant places on the mini s, no luck.
The mini s does recognise the 'livebox' and connects to it then drops off. However, it doesnt pick up any info from the 'box' to complete the relevant wireless tabs on the mini s.
Dont know how I'm going to resolve this but thanks for your help so far.
Shame not to utilise the Mini S with my current wireless broadband connnection.
Cheers
Andy
Hi All
Thanks for the advice so far and after so many attempts I am still unable to configure the mini s to use the wireless connection at home.
Need a huge favour. Would anyone give up a few minutes of their time to go through the configuration on the phone with me.
Please PM me your contact number and when it is convienent for me to call you back.
Much appreciated.
Andy
Hi Andy,
the settings depend to some extent on whether you have an access point (router) or shared connection.
You need to know the network name SSID, (and whether it's hidden)
WEP, WPA/PSK key,
Whether (as previously stated) you have MAC address control enabled in your router
Whether you have DHCP enabled (for automatic IP address from router)
Whether you need to log on (enroll) to password protected shares.
In the mini-S wifi>Menu>Network Cards>Network Adapters tab you should set your network card to connect to The Internet and check that the adapter (SDIO WLAN etc.) is set to use auto IP (if you have DHCP) or pick your own IP address if you have a fixed range.
If you have Zone Alarm or another firewall (I surely hope so :wink make sure that the (mini-S) IP address is in the trusted zone
Lastly; if you seem to be connected but you can't get any web pages - just a page not found error, try killing bloody ActiveSync on the mini-S, sometimes when I'm browsing I suddenly can't access pages and that's what the problem turns out to be - when you stop active sync running in the background it all starts to work again.
This is assuming you have a router not a shared connection which may be slightly different.
Oh....and read the threads about 802.11b and g, if your router only allows 11g the mini-S doesn't connect (I'd find the threads and point you to them but I gotta get back to work soz)
HTH (feel free to contradict or put me straight guys
:lol: )
Kim
cozzykim said:
Hi Andy,
the settings depend to some extent on whether you have an access point (router) or shared connection.
You need to know the network name SSID, (and whether it's hidden)
WEP, WPA/PSK key,
Whether (as previously stated) you have MAC address control enabled in your router
Whether you have DHCP enabled (for automatic IP address from router)
Whether you need to log on (enroll) to password protected shares.
In the mini-S wifi>Menu>Network Cards>Network Adapters tab you should set your network card to connect to The Internet and check that the adapter (SDIO WLAN etc.) is set to use auto IP (if you have DHCP) or pick your own IP address if you have a fixed range.
If you have Zone Alarm or another firewall (I surely hope so :wink make sure that the (mini-S) IP address is in the trusted zone
Lastly; if you seem to be connected but you can't get any web pages - just a page not found error, try killing bloody ActiveSync on the mini-S, sometimes when I'm browsing I suddenly can't access pages and that's what the problem turns out to be - when you stop active sync running in the background it all starts to work again.
This is assuming you have a router not a shared connection which may be slightly different.
Oh....and read the threads about 802.11b and g, if your router only allows 11g the mini-S doesn't connect (I'd find the threads and point you to them but I gotta get back to work soz)
HTH (feel free to contradict or put me straight guys
:lol: )
Kim
Click to expand...
Click to collapse
ello mate
I gotta agree with the activesync thing. I had the same problem as of 2 mins ago just tried exiting active sync and would ya believe it my wi fi now works. So i gotta say cheers mate!
cheers
tatata said:
the WIFI state is connected. but when I try to open a webpage, eg,www.google.com, it shows error: the page cannot be found. Check the name and try again. anyone knows that? how can I fix it?
Thanks.
Click to expand...
Click to collapse
I had the same problem with my Linksys WRT54G before. I upgraded the firmware (dowloaded from Linksys website) of my WRT54G and the problem solved.
New to the board (Just got my Cingular 8125) Having the same problem.
I get an IP addressfrom my router, it shows I am connected on my network settings, but still can't pull up any pages. It has never worked since I got it (only 3 days though) Someone please help us.
If >Connection Manager>Settings>WiFi Settings shows you have an IP address and are connected (Advanced :Status) then check your firewall settings and try stopping ActiveSync, always seems to do the trick for me
Also check out this post, could this be your problem?
http://forum.xda-developers.com/viewtopic.php?t=41469
@ cozzykim
I have shut down my zone alarm and don't have firewall enabled on my linksys WRV54G. ActivesSync is also closed. Still no luck
I will try to update my ROM it is not far fetched that cingular Jerry rigged the WiFi. I hope ther is a class action suit coming soon.
Thanks for your help.[/quote]
Hi all
Ive just brough a new belkin wireless n router set it up as you should connected my laptop my brothers laptop my desktop my ipod touch but my MDA touch will not connect to it. My touch connects to my other trendnet router fine and all other AP i have tryed. what is really bugging me is that when i try and connect to my new belkin it wont let me connect to any other routers so i have to delete the belkin router from my device and soft reset
i am starting to think it could be a faulty router or mda
Same boat....
I have the same issue with my HTC Kaiser, can see a host of AP/Wireless Routers via the Wi-Fi card but fails to connect to my Belkin F5D8631-4 v3 N1 Wireless Modem Router, a real pain in the arse considering the price I paid for the router, everything else connects, PC's, PS3, 360, DS Lite, PSP the lot....all bar the Kaiser.
Anyone managed to find a solution to this issue and sitting on it
Before you ask, no security enabled, only using the MAC address filtering to do the job of keeping unwanted off my network, even with this turned off the Kaiser see the network, flags it up as available but will not connect....
Any help gratefully received
Connecting
I bought a sitecom mimo XR router, I have got the same problem with a Qtek 9090.
The solution I found is, dont activate dhcp on your device but manually add the ip adresses of your router and device, set the dns server ip-adress to the ip-adress of your device.
Worked for me.
royaldutch51 said:
I bought a sitecom mimo XR router, I have got the same problem with a Qtek 9090.
The solution I found is, dont activate dhcp on your device but manually add the ip adresses of your router and device, set the dns server ip-adress to the ip-adress of your device.
Worked for me.
Click to expand...
Click to collapse
Thanks for the feedback/comments
I have done (I think) correctly and its still not playing ball, just to confirm the actual detail:
Router Set Up:
DHCP Activated ? (it is currently)
All WEP/WPA turned off
MAC address filtering turned on and the MAC adress for the hand set network card (found by
on to Com Manager, Settings, Wireless Lan, Advanced Tab) is on the list on accepted MAC address on the MAC filter
Handset Settings
Wireless Network Adapter settings (on Configure Network Adapters page)
IEEE 802.11b/g Compatible Wi-Fi
User Specific IP address 192.168.2.50 (not an address allocated by DHCP)
Subnet Mask 255.255.255.0
Default Gateway 192.168.2.1 (IP address of the Router)
Primary DNS 192.168.2.1 (IP address of the Router)
I get the same sort of problem occasionaly with my universal. The only thing that sorts it out is deleting any reference to the connection then removing the battery. This seems to flush out the system & then it finds it a new connection & connects straight away, worth a try if nothing else works.
JohnWB said:
I get the same sort of problem occasionaly with my universal. The only thing that sorts it out is deleting any reference to the connection then removing the battery. This seems to flush out the system & then it finds it a new connection & connects straight away, worth a try if nothing else works.
Click to expand...
Click to collapse
Thanks John,
I did try this, and it didn't make a difference.
You know when you get that feeling you are going to have to admit defeat....
Any solutions so far
Guys,
Does anyone has a solution so far?
What version of Windows mobile are you running?
This post in the Shift forum
http://forum.xda-developers.com/showthread.php?t=384730
mentions a beta firmware on Belkins UK site which solves the problem.
hi, i'm using a mda vario 3 with an older Belkin router and it works fine. I have the dhcp server turned off with all the ip's set manually. the ieee 802.1 auth thingy is not selected. other than that my settings are similar to those posted above. Although i have wep security set up. (Nintendo ds's only do wep)
Corrykid said:
What version of Windows mobile are you running?
Click to expand...
Click to collapse
I run Windows Mobile 6.1
When I ran Windows Mobile 6.0, I did not have contact with my Sitecom WL-173 router either.
tembares said:
Guys,
Does anyone has a solution so far?
Click to expand...
Click to collapse
I have found the solution.
Just upgrade the radio to 1.64.08.21.
Then it works.
wifi problem
just upgraded my MDA to wm6.1 and i encountered a problem regarding with my wifi connection.
having my old wm5, i dont have any problem connecting to my wireless router(d link) but when i upgraded my wizard to wm6.1, at first it will connect for about 20sec then the connection will drop and i cant connect anymore. but my wizard detects my router but it just on the screen that it is unavailable even though it shows a very strong signal.
i've tried to hard reset it and it doesn't work. i just wondering if there's a configuration i should do with the setting of my wifi? or is there an application that i can download here? and also i lost the voice tag program of my phone when i upgraded it to wm6.1, where cant i download an application for it?
thank you in advance!!! ([email protected])
Customer Call Details Nov 13 2008 04:37
I have an HTC Touch that can connect to other hotspots, but not to my home Belkin router. Sometimes, if there is another connection available, it can see the router, and says that it is Available, but cannot connect; other times it won't even see it. I have checked for firmware updates, but I have the latest. Any help would be greatly appreciated.
Belkin Response Nov 14 2008 22:18
Hi Lilburd,
Thank you for contacting Belkin Technical Support.
We understand that the HTC Touch does not connect to the router. We apologize for the inconvenience caused.
Please follow the steps given below to update the firmware and configure the router:
We recommend that you update the firmware from a computer that is connected to the router with an ethernet cable.
Please download the latest firmware on the router from the link given below. Download the file "3.01.29":
http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8233uk4&aid=10288&scid=0
and save it to the computer.
- To update the firmware, log on to the router`s web interface by typing in http://192.168.2.1 in the address bar of the browser. The computer should be
connected to the router with an ethernet cable.
Note: If you have changed your Router’s IP address, use that IP address.
- By default, the password is blank. Click the "Submit" button.
- Click on "Firmware Upgrade" under the option "Utilities".
- Click on “Browse” and select the bin file that you have downloaded.
- Click on “update” and follow the wizard.
- After updating the firmware, restore the router to factory defaults by clicking on "Restore Factory Defaults" under "Utilities".
- Reconfigure the router.
Please follow the steps given below for configuring the router:
- Connect the computer to the "LAN" port on the router and connect the modem to the Internet/"WAN" port, using Ethernet cables.
- Take a paper clip, insert the paper clip in the reset hole of the router and hold it for 15 seconds.
- The power light will flash and then come back "ON" solid, indicating that the router is being restored to factory defaults.
- The corresponding lights on the front of the router should be lit up.
- On the computer, check if you have an IP address in the range of 192.168.2.x.
- If not, specify a static IP address, gateway and "DNS" address by following the steps given in the link-
http://web.belkin.com/support/kb/kb.asp?a=2824
- Log on to the router web interface by typing in http://192.168.2.1, in the address bar of your browser.
- By default, the password is blank.
- Click on "Connection Type" in the left hand column under "Internet WAN" heading.
If the connection type is Dynamic (cable):
- Choose "Dynamic" and then click on "Next".
- Type in your “Host Name”, if your Internet Service Provider has provided it. Else, leave it blank.
- Click on "Change WAN MAC Address".
- Click on the button "Clone".
- Click on "Apply Changes".
If the connection type is PPPOE (DSL):
- Choose "PPPOE" and click on "Next".
- Enter the user name and password given by your Internet Service Provider.
- Save the settings.
- Click on the "Home" link at the top of the screen.
Internet Status should show "Connected" on the top right hand corner of the web page.
If the problem persists, please get back to us with the following information:
1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or static).
2. Name of the Internet service provider (ISP).
3. Version number of the router. You would find the version number on the bottom of the device. It would be a number in a series of thousands with a prefix “ver.”.
4. If the internet connection is stable on the computers using the router?
5. If the HTC Touch detects and connects to other networks in the neighborhood?
Lilburd, if you need further assistance please feel free to write back to us and we will be happy to assist you.
Regards,
Belkin Technical Support.
This was the response I got from Belkin after emailing them. It worked like a charm
Registry option
Not Sure about this one, but if you use SK Tools, or find the registry values yourself, there is an option to activate on the Touch, the 801 g networks compatibility, for some reason they are compatible but the option comes 'off' by default.
Paul
THANK YOU - Wizard 9100 now connecting to belkin N1
thank you - I had the same problem as original post - I updated using the pre release belkin firmware and it works now.
Excellent!
I was pretty sure that it was an incompatibility issue between HTC and Belkin.
Thanks a lot for this patch, you saved my (wifi) life ^^
This update also worked with my Kaiser! I was pulling my hair out trying to get it to connect. Thanks a lot!
I have spent lots of time researching this - seems like a lot have this same problem and I don't see a clear solution.
My 8525 says the WiFi is connected but I can't get anything in IE (keeps saying "locating" in the status line.
I have correctly connected to my router with the proper WEP 40 /64 bit (10 hex digits) key 1 specifying that this wireless network connects to "the internet".
I tried defining "My ISP" but it puts "GPRS" after the connection in the My ISP Settings...
I have tried NOGPRS to turn off GPRS entirely - but still no joy.
I also tried to manually hard code in the TCP/IP address for my DNS (using my laptop and looking at the wireless connection in IPCONFIG/ALL) (Don't know what WINS is though.) Also did the same for the IP address / subnet mask / gateway...
Anyone out there manage to get WiFi working after a WM6.1 upgrade? What did you do?
Use the MEdiaNet connection - just untick the Proxy in connection settings. No need to create new connections for your home WiFi. In the Network Mgt screen (under Start > Settings > Connections > Advanced tab > Connections button) set both drop downs to MEdiaNet.
Get a utility to verify you have an IP address from your router if you haven't already done so. I'm partial to FdcSoft Task Manager 3.1. If you have an IP then you should be connected.
If you do have an IP but PIE still times out, see if you can ping your router from your 8525. Same utility as mentioned above will do the job. Eliminate your router's WEP temporarily just to eliminate the security as a variable for testing.
Try using another browser. Not sure why, but at one time I'd hosed up PIE enough that it wouldn't load pages, whereas Opera and Skyfire would. If that's the case a hard reset may be in your future.
Good luck!
Thank You
Oh My God!!! Thank you Hotmail... I had same problem and now i have fixed it thanks to you!!!
Dragan93 said:
Oh My God!!! Thank you Hotmail... I had same problem and now i have fixed it thanks to you!!!
Click to expand...
Click to collapse
Glad it helped.
Since I bought the HD2 before 2 month and after 2 Rom upgrade I still have the same Wifi problem. I can connect to my home network and the Router can see the HD2 but I can not connect to the Internet through the Wifi. All other computers and PS3 connect just fine. Ip adress seems also ok.
Please help ?
I did have the same problem a while back, and it occured after I used the wifi router. Have you ever used that, even just to try it?
No I never tried the Wifi Router even once and changed rom twice.
quincy67 said:
No I never tried the Wifi Router even once and changed rom twice.
Click to expand...
Click to collapse
Probably not the same issue then. For some reason I had it trying to give me a static IP address that my router wouldn't allow (I've got MAC forwarding on my router to make sure that nothing other than the 4 things I have can connect to it).
When you connect to the wifi, can you open the router admin on your HD2?
Thanks for your help. No I cannot access the router from the HD2, could it be a proxy issue. I am not using a proxy for the internet
quincy67 said:
Thanks for your help. No I cannot access the router from the HD2, could it be a proxy issue. I am not using a proxy for the internet
Click to expand...
Click to collapse
No worries mate - I hope I can help!
It's not a proxy issue, if you're not using a proxy server. Could you try this and let me know how you get on?
Start your wifi connection
Go to all settings, connection, wifi, wireless networks, network adapters tab
Select the Broadcom DHD adapter
It should be set to use a server assigned IP address, not a static one. It probably is, but it's worth checking.
When I open Wifi settings I can only open advanced no wireless networks or network adapter tab. How do I get there ?
quincy67 said:
When I open Wifi settings I can only open advanced no wireless networks or network adapter tab. How do I get there ?
Click to expand...
Click to collapse
After you've started wifi, go to the settings tab, menu and all settings. Then carry on the instructions in the last post.
Found the all settings, the DHD adapter is set to server assigned. Any other ideas ?
...
Well i think we have the same problem.. If you try to connect your wireless, do you get the failure after pressing get IP: Cannot obtain serverassigned IP....
http://forum.xda-developers.com/showthread.php?t=627654 my thread was this..
I found out that if i you go under WIFI>ADVANCED>press on the NETWORKCARD under the field "SSID"> then go to the networkcard>Broadcom 802.11 DHD network adapter>remove the pin in use serverassigned, and write a static ip: example: IP: 192.168.1.23
UNDERMASK: 255.255.255.0
STANDARDgateway: 192.168.1.1
That helped for me, though i cannot use that fix because my college wont accept the static IP. so it works for like 2 mins and then it disconnect. hehe.
Heh - that would be pretty much my next suggestion.
Try a static IP address and see if that works. It's not a long-term solution, but it would determine whether it's your phone or the router that's having the problem.
Last time I set a static IP address, I liked it and left it like that, but I found (after a couple of days with no internet access) that it tries to assign the same IP address when you use your data connection for internet access. Your service provider is very unlikely to allow you to use the same IP address, so you probably can't connect.
Like I said, it's a test to see if you can connect - not a solution.
Do you know what IP addresses your router will allow you to use? Do you have a specified range of addresses, for example?
I have this exact same problem. I can connect to wifi networks at home, office, etc... But no network access. It connects to the AP's, gives me an IP Address, but I can't ping anything!
This thing gets more and more frustrating daily.
skwizod said:
I have this exact same problem. I can connect to wifi networks at home, office, etc... But no network access. It connects to the AP's, gives me an IP Address, but I can't ping anything!
This thing gets more and more frustrating daily.
Click to expand...
Click to collapse
It also happened to me. Turns out it was the router I was using. I bought a new one earlier today and problem solved!
Hi!
I got a d-link dgl-4300 router, and had problem getting a IP adr. from it. When I gave my HD2 a static IP it worked, but very slow. After I changed from DHD network adapter to NE 2000 compatible ethernet driver it get IP from router and I can browse internet through wifi fast. Maybe it can help u 2.
regards Xes.
All
I have my htc setup to both internet sharing and Wi-Fi connection on my work PC with a lan connection. On both of these connections e.g. wired USB and wireless i can get the internet for about 3 minutes then it stops working. Is there some sort of block? I did see a while back that the WiFi app has no restrictions...
Any help would be superb.
Cheers
Baker0
Thats a little odd, there is certainly no block and I have had the wifi router running for a good 30-40 minutes without failing.
what part is failing, is the phone no longer running the wifi router, or is the pc no longer getting internet on that network connection?
If you need help on how to find this info just reply and I can walk you through some more diagnostic steps.
The phone is still running just the internet stops on the machine. I have to stop the wi fi on the phone then start again then connect. I think it might be t-mobile but the internet on the phone is fine
are you in the uk?
if you connect your laptop to the phone via the wifi router you should be able to right click the network logo, click on status and view the wifi network info, it should tell you in there if it has internet access on that network connection.
If you try this again and when it fails check this status window and see if windows is seeing an internet connection or not?
when the net fails again try and visit http://72.14.203.100/ (this should be the google homepage) if you see google then there is a dns problem if it still says network timeout or failed to connect or something like that then we will have to dig further.
LOL thanks for your help. I am in the UK. ive been working in IT for the last 12 years and I know and have done the test, its not the machine it has something to do with the phone or t-mobile network
Sorry to hijack your thread a little, but I'm on the T-Mobile Network in the UK too (except I'm using a Touch Pro with a custom ROM), and although I can make connections from the PC to websites using the IP address, the DNS isn't working so I can't resolve domain names.
Any ideas?
Cheers,
Steve.
Baker0 said:
LOL thanks for your help. I am in the UK. ive been working in IT for the last 12 years and I know and have done the test, its not the machine it has something to do with the phone or t-mobile network
Click to expand...
Click to collapse
It must be the phone then since I do use wifi router, I am on t-mobile and in the UK and I do not experience this :S
I seem to be saying this more and more but maybe you should try a hard reset and see if that fixes the problem?
StevePritchard said:
Sorry to hijack your thread a little, but I'm on the T-Mobile Network in the UK too (except I'm using a Touch Pro with a custom ROM), and although I can make connections from the PC to websites using the IP address, the DNS isn't working so I can't resolve domain names.
Any ideas?
Cheers,
Steve.
Click to expand...
Click to collapse
This is likely an issue with the way your machine has been setup to connect to the wifi network. Try visting the properties of the network and vieing the dns settings for the tcp/ipv4, It should be set as Obtain DNS server addresses automatically. If it is set like this then try setting it too 8.8.8.8 and 8.8.4.4 these are googles, dns servers if this works for you then you could stick with this or do some further digging as to why you are not getting the dns server addresses automatically like you should be.
Xp3RiM3nT said:
This is likely an issue with the way your machine has been setup to connect to the wifi network. Try visting the properties of the network and vieing the dns settings for the tcp/ipv4, It should be set as Obtain DNS server addresses automatically. If it is set like this then try setting it too 8.8.8.8 and 8.8.4.4 these are googles, dns servers if this works for you then you could stick with this or do some further digging as to why you are not getting the dns server addresses automatically like you should be.
Click to expand...
Click to collapse
Setting the DNS entries to Google's makes it work, but attempting to get the DNS Server's automatically leaves me with no ability to resolve domain names. How strange?
Thanks for the workaround, not sure where to start looking to fix it properly.
Cheers,
Steve.
Hey guys,
I am new to this wifi router thing and got the following questions:
1. To be able to use it, you must have data connection with your provider. Am I right?
2. By any chance, can I use this system by using a sim taken out of a prepaid mobile broadband dongle and inserted into my device (htc touch HD)?
3. Once I get connected can I surf the internet/check emails etc from within the device itself without the need to use a laptop?
Please don't mind these basic stupid questions.
cheers