Hi... something happended with my Vario II or PC. Now when I connect my Vario II to the USB port, ActiveSync cant find it ('Not Connected') and Windows says: 'USB Device not Recognized'. I reinstalled all software that came with the Vario II, but its now working... Anyone help me, please!!!
Hi Jannen,
I've seen this before - but it usually cures itself after a PC and phone reboot (I would guess you have done this already. The issue appears to be either Windows USB host, your phone or the cable/connections on your USB cable.
I would suggest you try the following and see what happens...
1. On the TyTN goto Start > Settings > Connections > USB to PC - change the setting here from what it currently is.
2. Try a different USB cable if you have one.
3. Try a different USB port on the PC. Possibly on a different USB host if you can do that.
4. On Windows goto Control Panel > System > Hardware > Device Manager - look at the error appearing in the Universal Serial Bus Controllers. This might help identify the problem. Also try re-installing the drivers from here.
5. On the TyTN goto Start > Programs > Accessories > Wireless Modem - ensure this is not active. I think it automatically stops when you exit Wireless Modem but it does change the USB behaviour.
6. Install the latest ActiveSync program on your PC. I'm currently using 4.1 and 4.5 BETA and both are Ok. http://www.microsoft.com/windowsmobile/activesync/default.mspx
Post the response you see to each of the above and it will help diagnose and hopefully fix your issue.
Gav.
Works finally!
Thanks for your help! But took a while to sort it! I tried all those steps, again and again, with no result. I even updated the Active Sync etc. But after a soft boot of my Vario II - its finally working! No idea where the problem was though, one of those Windows mysteries is my guess.... :/
Thanks again!!!
Dear All ..
I have unvirsal JasJar and since I bought this PC everytime I'm trying to connect it to the computer to do synchronization the windows gives me
" windows can't recognized the USB device " I tried so many thing to solve it
like turn of the firewall , and anti viurse .. disconnect and reconnect the Pc and the computer . Please help me to solve this issue
P.S : the windows Xp tells me that there is no driver for the USB device
Sounds like a computer software problem. Have you attempted to update the driver(s)?
Try using some other USB port.
trythis: on your PPC go to settings>connections>USB to PC> disable the advanced network functionality.
hi, i have the same problem.
I cant find settings>connections>USB to PC.
At settings i have the tabs :
Beam
Bluetooth
Connections
CSD Line Type
GPRS Authentication
Network Cards
Wireless lan
Can anyone help?
when i connect my phone with a usb connection, there is an MTP application window that keeps flashing, this window just keeps opening and closing and on my pc i receive this message : installing device driver software
MTP USB Device - Failed
why is this happening?
Have you installed the USB Drivers that comes with KIES? if not do it.
If you want to just use normal mode then goto settings/about/usb/external drive . Then when you connect to pc you goto notifications on andrioid and select USB icon then Mount.
Should help
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
U saved me BRO!!..was tired of using OTH
U saved me BRO!!..was tired of using OTH
Applying all things you said but yureka not connect with computer
USB Computer Connection is still not popping
Hi, I have tried all that is said above, but still I am unable to connect my Yureka to PC. USB Computer Connection is still not popping any options.. Please help
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
well i have tried that but it wont even detect my yureka. IT DOESNT EvEN SHOW A UN RECOGNIZED DEVICE. HOW TO RESOLVe
?
Problem Solved
1. Proceed as Above.
2. Reboot your Phone.
3. Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
Problem Solved...
The problem is not in the phone, or can't be solved by it
Actually you have to do this via pc.
1)search update drivers and find the update device drivers option
2)in other devices find Android and double click
3)click the driver tab
4)click update driver
Worked for me ?????
PC connection Still its not working
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
Hi..
After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected"
can any one please help me ?
---------- Post added at 08:05 AM ---------- Previous post was at 07:59 AM ----------
Sahil Badal said:
1. Proceed as Above.
2. Reboot your Phone.
3. Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
Problem Solved...
Click to expand...
Click to collapse
After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected"
Yureka not connect to PC
[[/B][/B]
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
I have followed all above steps, but not shows USB connection.
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", this problem is after getting my replacement handset.
Hi, I have tried all that is said a, but still I am unable to connect my Yureka to PC. USB Computer Connection is still not popping any options.. Please help vikas meena 9694746144
Dear Sir,
As per your instruction i go to the setting but as u written
"Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox. "
after tapping computer connection nothing pop up arises. I can not enable Media Device (MTP)
Please guide me.
Suresh
vertexpac said:
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", this problem is after getting my replacement handset.
Click to expand...
Click to collapse
did u get any solution bro????..... i cant copy files to pc and root
---------- Post added at 05:33 AM ---------- Previous post was at 05:30 AM ----------
shadowkill97 said:
well i have tried that but it wont even detect my yureka. IT DOESNT EvEN SHOW A UN RECOGNIZED DEVICE. HOW TO RESOLVe
?
Click to expand...
Click to collapse
did u got any solution bro... i cant connect my yureka to pc. i want to root it. But i cant connect it
USB connection problem
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", plz help me
yureka AO 5510
Sir,
My yureka AO 5510 hardbricked and i used emmc image and enter into fastboot mode ( by only pressing power button it can switch on and work) but to flash this is not shown in device manager. I tried with usb driver, adb driver, nothing happend.... and gave to shop and changed its usb port.... but no use....
i can power on it with this memory card or go to fastboot mode.... can not connect to PC.... Please help me....
thank you for your practical guidance, because since so many days and several times I tried to connect with my laptop, last i thought to install some yu drives in my laptop, but this is a very useful points, you are putforth in this moment. once again thank you for the substantial helping tendency you have shown. may proceed it in future to help others,
i am using yu yereka lolipop os and windows 10 x64 pro and tried all method to install drivers but even when i connect my yu yureka ao5510 then it shows me (device disciptor request fail)error code 43.i did all thing from disable driver enforcement and various adb drivers but not success yet..
and when normally connet phone to pc it also not showing the adb option and mtp driver.i aslo tried with different pc but same problem....
plz guy help me!!!!
Got ot developer tools and enable the android debugging.. reboot the mobile
After reboot a pop up window will be opening and asks for disable the android debugging .. disable it in developer tools and then connect the usb cable again . then the pop up will be coming as usual ...and problem got solved
Yureka not connect to any pc
Pc shows popup that the device is malfunctioned.
In device manager it says device dicriptor request failed.
vrishabhv2 said:
i am using yu yereka lolipop os and windows 10 x64 pro and tried all method to install drivers but even when i connect my yu yureka ao5510 then it shows me (device disciptor request fail)error code 43.i did all thing from disable driver enforcement and various adb drivers but not success yet..
and when normally connet phone to pc it also not showing the adb option and mtp driver.i aslo tried with different pc but same problem....
plz guy help me!!!!
Click to expand...
Click to collapse
did you find any solution?
My S10+ can not connect to PC or other Android through USB
- When connect to PC (with full driver/ check with other S10), just only cable charging option, no pop-up to choose MTP, Files transfer....(pic 1)
- When connect to other android the pop-up show but can not choose other option (pic 2)
- I tried download mode connect Odin, but no signal of connection with PC
- When I boot to recovery to choose flash adb, screen show "unable to open sysfs usb node (No such file or directory). Trying configfs.....(pic 3)
Could you please advise us how I could do to fix the error
Mny thanks,
Type the following sequence on your phone's dial pad *#0808#
The USB settings on your phone should come up. Try selecting MTP+ADB and see what results you get.
You should try other type C cable..
Sent from my SM-G9750 using Tapatalk