Hello, I am new here. Can anyone show me how to make my MDA into a G WLAN? I know the thread is here http://forum.xda-developers.com/showthread.php?t=254420, but I don't know what to do next after downloading djvw file. What do I do next? Thanks in advance.
most likely its in a cab. just drag the cab over to your phone, a simple click will install it.
Read the FAQ's it tells you all this. And not that this tweak only allows you to see and use G speed, but the wizard wlan card cannot run at G speeds.
I extracted it into my "program files folder" in my MDA. I then try to open it, but it says, "There is no application associated with....."
The 3 files I extracted to my MDA are:
CAPNOT- 1
HTCWIZ-1
nick
I believe I have read the FAQ, still don't know what to do.
Can anyone help me please. I am trying to hack my MDA into becoming a G wifi enabled phone. Can anyone give me a step by step please? Help a rookie out will ya? Thanks in advance.
Copy my .cab File directly on your device. DO NOT EXTRACT IT! Then open the Explorer and simply click on it, your MDA will ask you where to install. Select main memory and proceed. After it's finished, do a soft reset. That's it!
Is there not a registry setting for it? Here, from the Wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard_Tweaks
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS "dot11SupportedRateMask"=dword:00000001
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS "dot11SupportedRateMaskG"=dword:00000008
Related
I just hard reset my magician. Since i'm using big storage (my friend did it), only some of the cab files from extended_rom are installed. Now i just found out that my smart dialing, MMS, O2 plus are not included. It was easy to recover those programs since i know the cab files.
However, i cant find the right cab for "Running Programs". Does anyone know which one? Thx.
Sorry for the bad language
Running programs - do you mean in Settings > system > memory > running programs?
If you need a task killer I can send you one or there's many around.
V
That's the one. Thx . So actually it's not a stand-alone program. Yes i found the running programs.
So, the question is changed now. I need the shortcut to that program. Usually magician has the blue box icon with a picture of someone running. Do you know the shortcut?
Thx.
Just tried to restore that icon from my old backup before it crashed. I thought it was just only a link to some program. But it is not! It is an exe file and after i restored it, click the Running Programs, it says "Error opening the shortcut or locating the target filename".
Any clues?
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
What does that file do? Just open up the running programs control panel?
If you need it back, just type the following into a text file on your PPC
Code:
22#ctlpnl cplmain.cpl,4,2
and save it as Memory.lnk
Then double click on that file.
Tell me if it works ok.
V
@vijay
i just wanna return my magician to the default system . that's why i'm so curious to get back that program.
@ampda
i'll try that file. thx for the info.
I can post my CAB file but it will also add the O2 xda defaults that can with the Aussie unit
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
THANK YOU!!! finally i can access my running programs.
anyway, ive another question . let's say i want that program to be installed automatically after I hard reset. how can you do that? so i do not have to restore them manually from my sd card. thx.
dinoalbert said:
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
Click to expand...
Click to collapse
To get the menu and icon run O2Auto.sa.CAB, then install the telco(s) you want to be in the autoconfiq menu.
@nsriza, thanks!!! As simple as this, and I can have my Autoconfig back already?
I thought I need to manually edit the autoconfig.txt to change the paths of the cab files?
Btw, I have already installed the cab files for all the Telcos that I need....but not the O2Auto.sa.CAB yet. Is it okay if I install that O2Auto then install again the Telco cabs?
Thanks...
So has anyone knew how to setup auto installation for cab files (eg. MMS, SmartDialing etc) after hard reset? thx
another OOT question...what does autoconfig.txt and config.txt do? and how to use it?
thx
Im assuming your asking for auto installation for after a hard reset using big storage. if you search for "AutoRUn" on this forum you should find a link on how to create an autorun folder on your storage card. you need the autorun.exe (Found in the search for the link) and a folder called 2577 created in the root directory of your storage card. then all you need to do is add all the CABs that you want to auto install after a HR to a ZIP (not Rar) archive and call that archive extROM.zip. then put that in your 2577 directory and hardreset and it will install all the files in the zip. if you havent already installed the cabs you put in the zip it will actually start installing them as soon as you insert the SD card. have a search around you will find lots of info about this subject.
SpeedN
@Speedn
thx for the suggestion. it's very helpful.
@rockafeller
hi i used big storage to convert my german rom (o2 xda mini) to wwe 1.12. now i lost some features like MMS,Smart dialling, Home zone control, O2plus. (as it was the case with you). It would be great if you could share here how did you get them back to work? i mean, i want the procedure to do so. i have a backup of my german rom.
one more question. i dont see the Phone pad option in my text input list after the bigstorage patch. how can i get it back. any suggestions would be so great..
thanx in advance
kk
@visvaram
if you backup ur extended_ROM, u should able to find related cab files, such as MMS**.cab, SMARTDIALING**.cab. Just tap those files and it will be installed automatically. FYI, backup ur cab files first b4 installing.
Im not sure about O2plus and zone files. Anyone care to help?
I used this cab file and speeded up my JAMin tremendously. I learnt it is for the KJAM that has the same processor, it tweaks your registry.
Just install it in your main memory (device) then soft reset.
is it speeding by overclock of the CPU?
can this be use with dopod 818 pro ?
have anyone tested it ?
http://forum.xda-developers.com/viewtopic.php?t=38898
erez29,
I don't think it overclock the cpu. It tweaks the WM5 registry.
ec_goh,
It works on the imate KJAM (HTC Wizard) and imate JAMin (HTC Prophet). Which one is yours? I'm not familiar with the dopod names/models.
Lucas0511,
Do you mean this is the same as the link? Does it sort out the WLAN as well?
I don't know why but every time i tried to install the cab file i got an "installation unsuccessfull".
So I extracted the registry settings out of the cab file and put them in a registry file. Here's the file for people that have the same problem as me.
DJVW HTC Wizard Optimizer.cab not install in jamin who to install it
what do you do with the optimize.zip file
tried running the .reg file, but will not work
i have resco registry editor installed. you need an editor to import te reg file
thanks, got it working, seems to be running abit quicker
salman_sharif said:
DJVW HTC Wizard Optimizer.cab not install in jamin who to install it
Click to expand...
Click to collapse
Connect your ppc to pc and ActivSync, Explore then copy the file from pc and paste it in ppc. (or copy to SD card).
on ppc locate the file using 'file explorer' and click on it to run the installation steps. Select to install in 'Device'. Shut down (press and hold power button), yes. Turn ppc back on.
This does not work on my jamin!!
Dieselman said:
salman_sharif said:
DJVW HTC Wizard Optimizer.cab not install in jamin who to install it
Click to expand...
Click to collapse
Connect your ppc to pc and ActivSync, Explore then copy the file from pc and paste it in ppc. (or copy to SD card).
on ppc locate the file using 'file explorer' and click on it to run the installation steps. Select to install in 'Device'. Shut down (press and hold power button), yes. Turn ppc back on.
Click to expand...
Click to collapse
Better yet, head on over to the Wizard forum section. Grab the registry wizard. It lets you set the settings individually and choose what you want, rather than a single cab.
I don't know why but every time i tried to install the cab file i got an "installation unsuccessfull".
So I extracted the registry settings out of the cab file and put them in a registry file. Here's the file for people that have the same problem as me.
Click to expand...
Click to collapse
heya,
i believe its because this installs capnotify.lnk which is already present in your device.
wm5's quite touchy about what it overwrites. you can delete the file in the cab. or delete the lnk in \windows
Where is the link
Hi,
I have gone through your post, but i cant ever see any links. Please advise.
Ahmed
Anyone tried this recently? does this improve something?
Hi Guys,
I know on Windows (XP) or other OS, we can install some files "silently", without a setup screen, choosing the install folder and things like that.
Is there a way to install CAB file silently on WM5, I got 2 cabs that I want to install, but dont want the user to "see it install''.
Maybe with adding some parameters to wceload.exe?
Regards,
Molski
Hi!
\Windows\wceload.exe my.cab /silent will install my.cab silently.
Remember to wait for wceload to exit before you try to install a second cab. You must also lower the securitylevel of the device or get the files signed for it to work......
Øystein
I generally use /noui switch.
hi guys,
this is my first time here in xda-developers,
please check this link if u r interested in intall the cab file silently
http://www.codeproject.com/useritems/wm2003cab.asp
[Edit by V: please don't use all caps. I've lowercased you]
Lurker and 2nd time post.
Hello!
Started developing my 8525 this week.Went with the Bulletproof 1.40 oil Hard SPL, Black WM6 2.5, Sim unlocker.
Question is this:
I need help loading the BlackWM6 keyboard fix. Do I do this from my desktop thru active sync, from the my docs on the phone or Manually?
Same goes for running the ADD-ON .cabs to allow cingular Video/ Realplayr fix.
Cant figure out the install. Googled and Forum searched 'keybord' couldent find the help.
Thank you!
fugi
Hate to say it but you need to read. Copy the CAB file to your device. Then open the CAB from the device. It will then prompt you to install. If it is something accessed intensely then put it on the device. If not then install it to the storage card.
fugitive said:
Lurker and 2nd time post.
Hello!
Started developing my 8525 this week.Went with the Bulletproof 1.40 oil Hard SPL, Black WM6 2.5, Sim unlocker.
Question is this:
I need help loading the BlackWM6 keyboard fix. Do I do this from my desktop thru active sync, from the my docs on the phone or Manually?
Same goes for running the ADD-ON .cabs to allow cingular Video/ Realplayr fix.
Cant figure out the install. Googled and Forum searched 'keybord' couldent find the help.
Thank you!
fugi
Click to expand...
Click to collapse
Thank you. I know there is a tutorial for it somewhere but I cant find it.
The Files included in the Keyboard fix for the Black 2.5 will not execute on my Desktop or my 8525. I have them copied to my storage card and when I click on any of the files they tell me it is not associated and that I need to open the file from within the application..I dont know what program the files are associated to.
fugitive said:
Thank you. I know there is a tutorial for it somewhere but I cant find it.
The Files included in the Keyboard fix for the Black 2.5 will not execute on my Desktop or my 8525. I have them copied to my storage card and when I click on any of the files they tell me it is not associated and that I need to open the file from within the application..I dont know what program the files are associated to.
Click to expand...
Click to collapse
Are these *.cab files or *.zip files???
I thought they would act as cab files but they identify as 0csetup...001... 002.... 003
files not as cab or zip.
fugitive said:
I thought they would act as cab files but they identify as 0csetup...001... 002.... 003
files not as cab or zip.
Click to expand...
Click to collapse
I dont know what your are running. Delete those a get the keyboard fixes which you need. What is the exact device you are using and the carrier? What keys are not working correctly? Where did you get those fixes??? If they are not *.cab files then dont run them.
Don't extract the cab files - copy them directly to your storage card and run them from there.
Yes That was the trick thank you. I had DLed them to my Desktop and tried to transfer the files in activesynch. DLed to my phone and it was golden.
Thanks for your patience.
Hi everyone,
I'm new to PDAs. I found this forum and you all seem very nice and helpful and seem all very tecnologically savvy. I just purchased a T-Mobile MDA Vario ( I think) off ebay and having trouble downloading program such as registry, smartskey, omap and all the other essential programs you all probably already have.
When I attempt to run the programs off this site it says .....exe is not a valid win 32 application.
Please help.
Thank you,
Danny
I believe you're trying to install your programs the wrong way. What you have to do is take the .cab (usually .cab files are also zipped so you have to extract them once first) files and in activesync hit explore and then navigate to windows\start menu\programs and move them in to that directory. Then on your MDA click start then programs and find the file you just moved there and click on it. From there, just follow the onscreen instructions.